RGBWE27ZW RGBW bulb
This describes the Z-Wave device RGBWE27ZW, manufactured by Zipato with the thing type UID of zipato_rgbwe27zw_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
The RGBWE27ZW supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
Zipato RGBW BULB has 5 color channels available for you to adjust: RED, GREEN, BLUE, WARM WHITE and COLD WHITE. Zipato RGBW BULB can be used to add color to your home or just to lighten it up in any white color tone you desire.
Inclusion Information
Screw the bulb on a standard E27 socket. Turn on the wall switch. Tap a few times on the bulb to include it (with your controller in inclusion mode)
Exclusion Information
Screw the bulb on a standard E27 socket. Turn on the wall switch. Tap a few times on the bulb to include it (with your controller in exclusion mode)
General Usage Information
Channels
The following table summarises the channels available for the RGBWE27ZW -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Color Control | color_color | color_color | ColorLight | Color |
| Color Temperature | color_temperature | color_temperature | ColorLight | Dimmer |
Dimmer
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Color Control
The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.
The color_color channel is of type color_color and supports the Color item and is in the ColorLight category.
Color Temperature
The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).
The color_temperature channel is of type color_temperature and supports the Dimmer item and is in the ColorLight category.
Device Configuration
The following table provides a summary of the 5 configuration parameters available in the RGBWE27ZW. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Color temperature | Values range from 0 to 100 where 0 is cold white and 100 is warm white. |
| 2 | Shock sensor sensitivity | Range from 0 to 31 where 0 is minimum sensitivity and 31 is maximum sensitivity. |
| 3 | Strobe Light Interval | Values range from 0 to 25 in intervals of 100 milliseconds. |
| 4 | Strobe Light Pulse Count | Values range from 0 to 250 and a special value 255 which sets infinite flashing. |
| 5 | Enable or Disable Random Strobe Pulse Colors | Values range are 0 (turn on) or 1 (turn off). |
Parameter 1: Color temperature
Values range from 0 to 100 where 0 is cold white and 100 is warm white.
Values in the range 1 to 100 may be set.
The manufacturer defined default value is 50.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Parameter 2: Shock sensor sensitivity
Range from 0 to 31 where 0 is minimum sensitivity and 31 is maximum sensitivity.
Values in the range 0 to 31 may be set.
The manufacturer defined default value is 16.
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Parameter 3: Strobe Light Interval
Values range from 0 to 25 in intervals of 100 milliseconds.
Values in the range 0 to 25 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Parameter 4: Strobe Light Pulse Count
Values range from 0 to 250 and a special value 255 which sets infinite flashing.
Values in the range 0 to 255 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_4_1 and is of type INTEGER.
Parameter 5: Enable or Disable Random Strobe Pulse Colors
Values range are 0 (turn on) or 1 (turn off).
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | turn off |
| 1 | turn on |
The manufacturer defined default value is 0 (turn off).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The RGBWE27ZW supports 1 association group.
Group 1: Lifeline
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 7 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_COLOR_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.