Skip to content

Xiaomi Wifi Devices (Mi IO) Binding ​

This binding is used to control Xiaomi products implementing the Mi IO protocol. This protocol is used for most of Xiaomi Mi Ecosystem wifi devices which is branded as MiJia. If your Xiaomi wifi device is controlled by the mihome app, most likely it communicates using the Mi IO protocol and can communicate with openHAB using this binding.

MIIO logo

Supported Things ​

The following things types are available:

ThingTypeDescription
miio:cloudCloud Connector — manages Xiaomi cloud authentication and provides device tokens to all other things. Add one per openHAB instance.
miio:genericGeneric type for discovered devices. Once the token is available and the device model is determined, this ThingType will automatically change to the appropriate ThingType
miio:vacuumFor Xiaomi/Roborock Robot Vacuum products
miio:basicFor most other devices like yeelights, airpurifiers. Channels and commands are determined by database configuration
miio:gatewaySimilar to basic, but with the Bridge feature, it can support to forward commands for connected devices
miio:lumiThing type for subdevices connected to the gateway. Note, these devices require a defined gateway to function
miio:unsupportedFor experimenting with other devices which use the Mi IO protocol or to build experimental support

Discovery ​

The binding has 2 methods for discovering devices. Depending on your network setup and the device model, your device may be discovered by one or both methods. If both methods discover your device, 2 discovery results may be in your inbox for the same device.

The mDNS discovery method will discover your device type, but will not discover a (required) token. The basic discovery will not discovery the type, but will discover a token for models that support it. Accept only one of the 2 discovery results, the alternate one can further be ignored.

Tokens ​

The binding needs a token from the Xiaomi Mi Device in order to be able to control it. The binding can retrieve the needed tokens from the Xiaomi cloud. Go to the binding config page and enter your cloud username and password. The server(s) to which your devices are connected need to be entered as well. Use the one of the regional servers: cn,de,i2,tw,ru,sg,us. Multiple servers can be separated with comma, or leave blank to test all known servers. See binding configuration for more details about the binding config.

Tokens Without Cloud Access ​

Some devices provide the token upon discovery. This may depends on the firmware version. If the device does not discover your token, it needs to be retrieved from the Mi Home app.

The easiest way to obtain tokens is to browse through log files of the Mi Home app version 5.4.49 for Android. It seems that version was released with debug messages turned on by mistake. An APK file with the old version can be easily found using one of the popular web search engines. After downgrading use a file browser to navigate to directory SmartHome/logs/plug_DeviceManager, then open the most recent file and search for the token. When finished, use Google Play to get the most recent version back.

For iPhone, use an un-encrypted iTunes-Backup and unpack it and use a sqlite tool to view the files in it: Then search in "RAW, com.xiaomi.home," for "USERID_mihome.sqlite" and look for the 32-digit-token or 96 digit encrypted token.

Note. The Xiaomi devices change the token when inclusion is done. Hence if you get your token after reset and than include it with the Mi Home app, the token will change.

Binding Configuration ​

No binding configuration is required. Cloud functionality is provided through the dedicated Cloud Connector thing (miio:cloud) described below.

Note: Entering cloud credentials directly in the binding configuration page (username / password fields) is deprecated and no longer has any effect. Please migrate to the Cloud Connector thing as described in the Cloud Connector Thing section.

Cloud Connector Thing ​

Cloud access — needed to retrieve device tokens and to show vacuum maps — is managed by a dedicated miio:cloud thing called the Cloud Connector.

Why a Separate Thing? ​

The Cloud Connector thing allows openHAB to surface the Xiaomi login flow as regular channels. This makes it possible to scan a QR code directly from the openHAB UI, respond to captcha challenges, and handle two-factor authentication without leaving openHAB. Stored session tokens are persisted back into the thing configuration so that subsequent binding restarts reuse the existing session automatically (TOKEN login fast-path).

Discovery and Creation ​

The binding automatically proposes a Cloud Connector discovery result in the inbox on startup. Accept it, or manually add a thing of type miio:cloud with the ID cloudConnector.

Cloud Connector Thing Configuration ​

ParameterTypeRequiredDescription
usernametextfalseXiaomi account e-mail address. Only used with PASSWORD login method.
passwordtextfalseXiaomi account password. Only used with PASSWORD login method.
login-methodtextfalseLogin method: QRCODE (default — scan QR code with Mi Home app) or PASSWORD (username + password, may require captcha / 2FA). Options: QR Code (Default), Password Login
countrytextfalseRegional server(s) to connect to (e.g. de, sg,de). Separate multiple values with a comma. Leave blank to try all known servers.
cloud-discovery-modetextfalseEnable cloud-based device discovery. Options: Local Only (Default) (default), Online Supported, All Devices (Advanced).
user-idtextfalse(Advanced) Xiaomi user ID — retrieved automatically after successful login. Do not edit manually.
client-idtextfalse(Advanced) Unique client identifier — generated automatically on first use. Do not change unless you know what you are doing.
service-tokentextfalse(Advanced) Xiaomi service token — retrieved automatically after successful login. Do not edit manually.
ssecuritytextfalse(Advanced) Xiaomi ssecurity value — retrieved automatically after successful login. Do not edit manually.

Cloud Connector Channels ​

ChannelTypeDescription
login-imageImageDisplays the QR code to scan (QR code login) or the captcha image to solve (password login). Use the openHAB UI or a sidecar image item to view this image.
captcha-responseStringSend the text visible in the captcha image to this channel when a captcha is required.
two-faStringSend the 2FA / email verification code to this channel when two-factor authentication is required.
trigger-loginSwitchTurn ON to cancel any in-progress login and start a fresh login sequence (new QR code). Resets to OFF automatically. Has a 30-second cooldown.

Login Flow: QR Code (Default) ​

  1. Add and accept the Cloud Connector thing.
  2. The login-image channel shows an orange hourglass while the QR code is being fetched.
  3. Within about one second a QR code appears in the login-image channel.
  4. Open the Mi Home app → Me → tap your account photo → Sign out is shown if already signed in, otherwise go to Settings → Xiaomi Account → Scan QR code.
  5. Scan the QR code. The thing status changes to ONLINE and device tokens are retrieved automatically.
  6. After a successful login the session credentials are persisted into the thing configuration; subsequent openHAB restarts will reuse the session without requiring a new QR scan.
  7. If the QR code expires (after ~5 minutes) before you scan it, turn the trigger-login channel ON to obtain a fresh QR code.

Login Flow: Username + Password ​

  1. Set login-method to PASSWORD and enter your username and password in the thing configuration.
  2. The binding attempts to log in automatically.
  3. If a captcha is required, the login-image channel shows the captcha image. Send the text you see to the captcha-response channel.
  4. If two-factor authentication is required, an e-mail code is sent to your account. Send the code to the two-fa channel.
  5. After a successful login the session credentials are persisted; subsequent restarts skip the password flow automatically.

Migration from Binding-Level Credentials ​

In previous versions, cloud credentials were entered in the binding configuration page. That mechanism is now deprecated and ignored. To migrate:

  1. Open the openHAB UI and accept the Cloud Connector discovery result from the inbox (or add a miio:cloud thing manually).
  2. Configure the thing: set login-method, username/password (if using password login), and country.
  3. Remove the old credentials from the binding configuration page (optional but recommended to avoid confusion).
  4. After a successful login all devices will automatically start using the new cloud connection.

The binding also supports the discovery of devices via the cloud. This may be useful if the device is on a separate subnet. Set cloud-discovery-mode on the Cloud Connector thing to supported or all to enable this. Note: after accepting a device discovered via the cloud on a different subnet, set the device communication to cloud in the thing configuration.

Thing Configuration ​

Each Xiaomi device (Thing) needs the IP address and token configured to be able to communicate. See discovery for details. Optional configuration is the refresh interval and the deviceID. Note that the deviceID is automatically retrieved when it is left blank. The configuration for model is automatically retrieved from the device in normal operation. However, for devices that are unsupported, you may override the value and try to use a model string from a similar device to experimentally use your device with the binding.

ParameterTypeRequiredDescription
hosttexttrueDevice IP address
tokentexttrueToken for communication (in Hex)
deviceIdtexttrueDevice Id (typically a number for normal devices) for communication
modeltextfalseDevice model string, used to determine the subtype
refreshIntervalintegerfalseRefresh interval for refreshing the data in seconds. (0=disabled)
timeoutintegerfalseTimeout time in milliseconds
communicationtextfalseCommunicate direct or via cloud (options values: 'direct', 'cloud')
cloudServertextfalseIdentifies the country server to use in case of cloud communication

Note: Suggest to use the cloud communication only for devices that require it. It is unknown at this time if Xiaomi has a rate limit or other limitations on the cloud usage. e.g. if having many devices would trigger some throttling from the cloud side. Note2: communications parameter is not available for lumi devices. Lumi devices communicate using the bridge/gateway.

Example Thing File ​

Thing miio:basic:light "My Light" [ host="192.168.x.x", token="put here your token", deviceId="326xxxx", model="philips.light.bulb", communication="direct" ]

or in case of unknown models include the model information of a similar device that is supported:

Thing miio:vacuum:s50 "vacuum" @ "livingroom" [ host="192.168.15.20", token="xxxxxxx", deviceId="326xxxx", model="roborock.vacuum.s4", communication="direct", cloudServer="de" ]

in case of gateway, instead of defining it as a Thing, use Bridge

Bridge miio:gateway:lumigateway "Mi Smarter Gateway" [ host="10.10.x.x", token="put here your token", deviceId="326xxxx", model="lumi.gateway.mieu01", communication="direct", cloudServer="de" ]

Advanced: Getting Unsupported Devices to Work with the Binding ​

Newer devices may not yet be supported. However, many devices share large similarities with existing devices. The binding allows to try/test if your new device is working with database files of older devices as well.

There are 3 ways to get unsupported devices working:

Substitute Model for Unsupported Devices ​

Replace the model with the model which is already supported. For this, first remove your unsupported Thing. Manually add a miio:basic Thing. Besides the regular configuration (like ip address, token) the modelId needs to be provided. Normally the modelId is populated with the model of your device, however in this case, use the modelId of a similar device. Look at the openHAB forum, or the openHAB GitHub repository or this readme for the modelId of similar devices.

Create Support for New Devices Based on Online Published Spec Database ​

The unsupported device has a (experimental) Create channels for new/unsupported devices (MIOT protocol) channel. When switching on, it will try to build support based on the published spec from https://home.miot-spec.com/. It will test all properties are in the spec for your device, which may take few minutes. A test report will be shown in the log and is saved in the userdata/miio folder with a filename test-[your model]-[timestamp].txt. The experimental database file is saved to the conf/misc/miio folder (see below chapter). The Thing will go offline and will come back online as basic device, supporting the found channels. If this does not happen automatically, restart the binding or restart openHAB in order to have the new database file picked up.

Please validate and feedback if all channels and actions are working, and share the logfile and json files on the openHAB forum or the openHAB GitHub to build future support for this model.

Supported Property Test for Unsupported Devices ​

The unsupported device has a test channel with switch. When switching on, all known properties are tested, this may take few minutes. A test report will be shown in the log and is saved in the userdata/miio folder with a filename test-[your model]-[timestamp].txt. If supported properties are found, an experimental database file is saved to the conf/misc/miio folder (see below chapter). The Thing will go offline and will come back online as basic device, supporting the found channels. The database file may need to be modified to display the right channel names. After validation, please share the logfile and json files on the openHAB forum or the openHAB GitHub to build future support for this model.

Advanced: Adding Local Database Files to Support New Devices ​

Things using the basic handler (miio:basic things) are driven by json 'database' files. This instructs the binding which channels to create, which properties and actions are associated with the channels etc. The conf/misc/miio (e.g. in Linux /opt/openhab/conf/misc/miio/) is scanned for database files and will be used for your devices. During the start of the binding the exact path used in your system will be printed in the debug log. Watch for a line containing Started miio basic devices local databases watch service. Watching for database files at path: … ( If this folder is created after the start of the binding, you may need to restart the binding (or openHAB) to be able to use the local files. Note that local database files take preference over build-in ones, hence if a json file is local and in the database the local file will be used. For the format and all supported options, see the database file format documentation, and check the current database files in openHAB GitHub for examples.

FAQ: What to Do in Case of Problems ​

If your device is not getting online:

Are you using text config? Make sure you define all the fields as per above example. Or, better, try to get it going first without text config.

The token is wrong The most common cause of non responding devices is a wrong token. When you reset, or change wifi or update firmware, and possibly other cases as well, the token may change. You'll need to get a refreshed token.

My token is coming from the cloud... how can it be wrong? Is not very likely but still can happen._ This can happen e.g. if your device is defined on multiple country servers. The binding may pull the token from the wrong country server. First try to get the token from all country servers by leave the county setting empty. If that does not solve it, you define only the country that the device is on in the binding config page (where the cloud userid/pwd is entered) this should pull the right token.

You have the same device added multiple times. The communication each time send a sequential number. If the device is twice defined, the numbers received by the device are no longer sequential and it will stop responding for some time.

The connection is not too good, so you have timeouts etc. Position your device closer to wifi / check in the mihome app if the wifi strength is good enough. Alternatively as described above, double check for multiple connections for single device.

Your device is on a different subnet? This is in most cases not working. Firmware of the device don't accept commands coming from other subnets. Set the communication in the Thing configuration to 'cloud'.

Cloud connectivity is not working The most common problem is a wrong or missing user-id/password, or the Cloud Connector thing has not been set up yet. Cloud credentials are no longer configured on the binding configuration page — see the Cloud Connector Thing section for setup instructions. If the Cloud Connector thing is configured and still not working, try the following:

  • Use the QR code login method instead of password login, as it avoids captcha / account-verification issues.
  • Turn the triggerlogin channel ON to restart the login sequence and get a fresh QR code.
  • Xiaomi Account verification might be needed. For some users login by the binding is unsuccessful as account verification is required. In order to pass validation your (openHAB server) ip needs to be validated/confirmed. Browse to https://account.xiaomi.com/ and log on to your account. Note: use the same external IP address as your openHAB server, e.g. you may need to disable your VPN.
  • If above is not possible or fails, you can try to find in the binding debug logging a location url. Try to login using this url (just after it fails) with your browser.
  • Several users also reported success by resetting their Xiaomi password.

If it still fails, try restarting openHAB (not just the binding) to clear the cookies. Enable TRACE logging on org.openhab.binding.miio.internal.cloud for detailed diagnostics.

My Roborock vacuum is not found or not reacting Did you link the vacuum with the Roborock app? This won't work, the Roborock app is using a different communication method. Reset your vacuum and connect it to the Xiaomi MiHome app. This will change the communication method and the Mi IO binding can communicate with the vacuum.

Mi IO Devices ​

Currently the miio binding supports more than 620 different models.

DeviceThingTypeDevice ModelSupportedRemark
AUX Smart Air Conditionermiio:unsupportedaux.aircondition.v1No
Mi Air Frying Panmiio:basiccareli.fryer.maf01ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Fryer (3.5L)miio:basiccareli.fryer.maf02ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Frying Panmiio:basiccareli.fryer.maf03ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Fryer Pro 4Lmiio:basiccareli.fryer.maf05aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Fryer 6.5Lmiio:basiccareli.fryer.maf10aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Qingping Air Monitor Litemiio:basiccgllc.airm.cgd1stExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Qingping Air Monitor Litemiio:basiccgllc.airm.cgdn1Yes
Qingping Air Monitor 2miio:basiccgllc.airm.cgs2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Multifunction Air Monitormiio:basiccgllc.airmonitor.b1Yes
Qingping Air Monitormiio:basiccgllc.airmonitor.s1Yes
Mi Universal Remotemiio:unsupportedchuangmi.ir.v2No
Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway)miio:basicchuangmi.plug.212a01Yes
Mi Smart Plug WiFimiio:basicchuangmi.plug.hmi205Yes
Mi Smart Plug (WiFi)miio:basicchuangmi.plug.hmi206Yes
Mi Smart Wi-Fi Plug (Bluetooth Gateway)miio:basicchuangmi.plug.hmi208Yes
Mi Plug Minimiio:basicchuangmi.plug.m1Yes
Mi Smart Plug (Wi-Fi) Basicmiio:basicchuangmi.plug.m3Yes
Mi Smart Power Plugmiio:basicchuangmi.plug.v1Yes
Mi Smart Power Plug v2miio:basicchuangmi.plug.v2Yes
MIJIA Smart Plug Enhancedmiio:basicchuangmi.plug.v3Yes
Mi Remotemiio:unsupportedchuangmi.remote.v2No
Mijia Rice cookermiio:basicchunmi.cooker.eh1ExperimentalCooking can only be started from the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi IH Rice Cookermiio:unsupportedchunmi.cooker.normal1No
Mi IH Rice Cookermiio:unsupportedchunmi.cooker.normal2No
Mi IH Rice Cooker 4Lmiio:unsupportedchunmi.cooker.normal4No
Mi IH Pressure Rice Cookermiio:unsupportedchunmi.cooker.press1No
Mi IH Pressure Rice Cookermiio:unsupportedchunmi.cooker.press2No
Xiaomi Smart Blendermiio:basicchunmi.juicer.twa1ExperimentalPrograms can only be started from the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Blendermiio:basicchunmi.juicer.uka1ExperimentalPrograms can only be started from the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Gosund Smart Plugmiio:basiccuco.plug.cp1YesIndicator light, child lock, power-on state and power metering follow the Mi Home plugin; they are not in the MIoT spec and may not be available on every plug.
Gosund Smart Plug CP1miio:basiccuco.plug.cp1dExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Plug 2 (Wi-Fi)miio:basiccuco.plug.v2eurYes
Mi Smart Antibacterial Humidifiermiio:basicdeerma.humidifier.jsqYes
Mi Smart Humidifier Smiio:basicdeerma.humidifier.jsq1Yes
Mijia Smart Anti-bacterial Humidifier 2miio:basicdeerma.humidifier.jsq2gExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Humidifier 2miio:basicdeerma.humidifier.jsq2wYes
Mi Smart Antibacterial Humidifiermiio:basicdeerma.humidifier.jsq5Yes
Mi Smart Humidifer Smiio:basicdeerma.humidifier.jsqsYes
Mi Smart Humidifiermiio:basicdeerma.humidifier.mjjsqYes
Mi Fresh Air Ventilator A1-150miio:basicdmaker.airfresh.a1Yes
Mi Fresh Air Ventilatormiio:basicdmaker.airfresh.t2017Yes
Mi Smart Standing Fan 2 Litemiio:basicdmaker.fan.1cYes
Mi Smart Standing Fan 1Xmiio:basicdmaker.fan.p5Yes
Mi Smart Standing Fan 1Cmiio:basicdmaker.fan.p8Yes
Mi Smart Tower Fanmiio:basicdmaker.fan.p9Yes
Mi Smart Standing Fan 2miio:basicdmaker.fan.p10Yes
Mi Smart Standing Fan Promiio:basicdmaker.fan.p11Yes
Mi Smart Standing Fan Promiio:basicdmaker.fan.p15Yes
Mi Smart Standing Fan 2miio:basicdmaker.fan.p18Yes
Mijia Smart Standing Air Circulation Fanmiio:basicdmaker.fan.p28ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Standing Fan 2 Promiio:basicdmaker.fan.p33Yes
Xiaomi Smart Tower Fanmiio:basicdmaker.fan.p39Yes
Mijia Smart Tower Fan 2miio:basicdmaker.fan.p45ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mopmiio:basicdreame.vacuum.ma1808Yes
Mi Robot Vacuum-Mopmiio:basicdreame.vacuum.mb1808Yes
Mi Robot Vacuum Mop 1C STYTJ01ZHMmiio:basicdreame.vacuum.mc1808Yes
Xiaomi Robot Vacuum-Mop 2Cmiio:basicdreame.vacuum.md1808Yes
Dreame Robot Vacuum-Mop F9miio:basicdreame.vacuum.p2008ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Robot Vacuum D9miio:basicdreame.vacuum.p2009Yes
Dreame Bot W10miio:basicdreame.vacuum.p2027ExperimentalPause Mop Washing and Resume Mop Washing need firmware 1038 or newer
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Bot Z10 Promiio:basicdreame.vacuum.p2028ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot L10 Plusmiio:basicdreame.vacuum.p2028aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Bot L10 Promiio:basicdreame.vacuum.p2029Yes
Trouver Robot LDS Vacuum-Mop Findermiio:basicdreame.vacuum.p2036Yes
Mi Robot Vacuum-Mop 1Tmiio:basicdreame.vacuum.p2041ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2 Pro+miio:basicdreame.vacuum.p2041oExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum X10+miio:basicdreame.vacuum.p2114aYes
Mijia Omni Robot Vacuum-Mopmiio:basicdreame.vacuum.p2114oYes
Mijia Robot Vacuum-Mop 2Cmiio:basicdreame.vacuum.p2140ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2Cmiio:basicdreame.vacuum.p2140aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2miio:basicdreame.vacuum.p2140oExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2miio:basicdreame.vacuum.p2140pExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2miio:basicdreame.vacuum.p2140qExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum-Mop Ultra Slimmiio:basicdreame.vacuum.p2148oExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Self-Cleaning Robot Vacuum-Mop Promiio:basicdreame.vacuum.p2149oExperimentalPause Mop Washing and Resume Mop Washing need robot firmware 1030 or newer, Start Mop Drying and Stop Mop Drying firmware 1071 or newer and the robot in the station
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2 Ultramiio:basicdreame.vacuum.p2150aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2 Ultra Setmiio:basicdreame.vacuum.p2150bExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum-Mop Dirt Disposalmiio:basicdreame.vacuum.p2150oExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MOVA Z500 Robot Vacuum and Mop Cleanermiio:basicdreame.vacuum.p2156oExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MOVA L600 Robot Vacuum and Mop Cleanermiio:basicdreame.vacuum.p2157ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot D9 Promiio:basicdreame.vacuum.p2187ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Bot D9 Maxmiio:basicdreame.vacuum.p2259ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot W10 Pro Self-Cleaning Robot Vacuum and Mopmiio:basicdreame.vacuum.r2104ExperimentalExample command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot D10 Plusmiio:basicdreame.vacuum.r2205ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum X10miio:basicdreame.vacuum.r2209Yes
Mijia Self-Cleaning Robot Vacuum-Mop 2 Promiio:basicdreame.vacuum.r2210ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S10+miio:basicdreame.vacuum.r2211oExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot X10 Promiio:basicdreame.vacuum.r2215ExperimentalDrain Robot Water Tank needs firmware 1505 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot L10s Promiio:basicdreame.vacuum.r2216oExperimentalExample command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot S10miio:basicdreame.vacuum.r2228YesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
DreameBot L10s Ultramiio:basicdreame.vacuum.r2228oYesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
DreameBot L10s Ultramiio:basicdreame.vacuum.r2228zYesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
DreameBot W10s Promiio:basicdreame.vacuum.r2232aExperimentalReset Silver Ion Life is only for the DreameBot L10s Prime. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot L10s Primemiio:basicdreame.vacuum.r2232cExperimentalReset Silver Ion Life is only for the DreameBot L10s Prime. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot S10 Promiio:basicdreame.vacuum.r2233YesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
DreameBot X10miio:basicdreame.vacuum.r2235ExperimentalDrain Robot Water Tank needs firmware 1505 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot S10 Plusmiio:basicdreame.vacuum.r2246ExperimentalBase Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot S10 Pro Plusmiio:basicdreame.vacuum.r2247ExperimentalBase Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
DreameBot W10smiio:basicdreame.vacuum.r2251oExperimentalReset Silver Ion Life is only for the DreameBot L10s Prime. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}')
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Infinite Robot Vacuum-Mop 1Smiio:basicdreame.vacuum.r2254ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame L10s Pro Ultra Heatmiio:basicdreame.vacuum.r2338YesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
Dreame L10s Pro Ultra Heatmiio:basicdreame.vacuum.r2338aYesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
Dreame L10s Pro Ultra Heatmiio:basicdreame.vacuum.r2338hYesDrain Robot Water Tank needs firmware 2803 or newer and the robot in the station. Base Station Cleaning makes the robot leave the station, fills the station with water for manual brushing and drains it after about 3 minutes; send Return To Dock afterwards. Example command for room cleaning (room 3, then room 5; per room the room id, repeats, suction 0 to 3, water level 1 to 3 and order; the room ids are those of the robot map, which the binding cannot read) xiaomi_robot_execute.sendCommand('action{"siid":4,"aiid":1,"in":[{"piid":1,"value":18},{"piid":10,"value":"{\"selects\":[[3,1,1,2,1],[5,1,1,2,2]]}"}]}'). The models dreame.vacuum.r2338, r2338a and r2338h are not tested: they have no MIoT spec and are assumed to use the same layout as the DreameBot L10s Ultra
HUIZUO ARIES For Bedroommiio:basichuayi.light.ari013ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ARIES For Living Roommiio:basichuayi.light.ariesExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Fan Lightmiio:basichuayi.light.fanwyExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Fan Light(2020)miio:basichuayi.light.fanwy2ExperimentalPreset: when enabled, the light and fan start with the preset brightness, color temperature and fan speed.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PEGASUS For Living Roommiio:basichuayi.light.peg091ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PEGASUS For Bedroommiio:basichuayi.light.peg093ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PISCES For Bedroommiio:basichuayi.light.pis123ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PISCES For Living Roommiio:basichuayi.light.piscesExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO TAURUS For Bedroommiio:basichuayi.light.tau023ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO TAURUS For Living Roommiio:basichuayi.light.taurusExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO VIRGO For Bedroommiio:basichuayi.light.vir063ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO VIRGO For Living Roommiio:basichuayi.light.virgoExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Ceiling Lightmiio:basichuayi.light.wyExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUAYI LIGHTING COMMON CEILING LIGHTmiio:basichuayi.light.wy002ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO LIANGCHEN(BLE Mesh)miio:basichuayi.light.wy200ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO SAG Downlight (BLE Mesh)miio:basichuayi.light.wy201ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Bulb (BLE Mesh)miio:basichuayi.light.wy202ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO YONG Downlight (BLE Mesh)miio:basichuayi.light.wy203ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
huayi.light.wy204miio:basichuayi.light.wy204ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Heating Lampmiio:basichuayi.light.wyheatExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ZIWEI Ceiling Lampmiio:basichuayi.light.zw131ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MiJia Rice Cookermiio:unsupportedhunmi.cooker.normal3No
Jinxing Smart Air Conditionermiio:unsupportedidelan.aircondition.v1No
Mi Robot Vacuum-Mop Promiio:basicijai.vacuum.v1ExperimentalUse the clean_rooms channel with comma separated room ids to clean specific rooms. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum-Mop 2miio:basicijai.vacuum.v2YesUse the clean_rooms channel with comma separated room ids to clean specific rooms. The Mi Robot Vacuum-Mop 2 Pro (ijai.vacuum.v3) can stop the map upload to the Xiaomi cloud with the command set_properties[{"did":"map_uploads","siid":10,"piid":23,"value":1}] on the actions#commands channel (value 0 enables it again). Stopping the map upload deactivates the map functions and clears the map data, so it is not offered as a channel. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action either; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Mi Robot Vacuum-Mop 2 Promiio:basicijai.vacuum.v3YesUse the clean_rooms channel with comma separated room ids to clean specific rooms. The Mi Robot Vacuum-Mop 2 Pro (ijai.vacuum.v3) can stop the map upload to the Xiaomi cloud with the command set_properties[{"did":"map_uploads","siid":10,"piid":23,"value":1}] on the actions#commands channel (value 0 enables it again). Stopping the map upload deactivates the map functions and clears the map data, so it is not offered as a channel. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action either; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Mi Robot Vacuum-Mop 2 Litemiio:basicijai.vacuum.v10ExperimentalUse the clean_rooms channel with comma separated room ids to clean specific rooms. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum-Mop 2Promiio:basicijai.vacuum.v13ExperimentalUse the clean_rooms channel with comma separated room ids to clean specific rooms. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Self-Cleaning Robot Vacuum-Mopmiio:basicijai.vacuum.v14ExperimentalUse the clean_rooms channel with comma separated room ids to clean specific rooms. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S10miio:basicijai.vacuum.v17YesUse the clean_rooms channel with comma separated room ids to clean specific rooms. The Xiaomi Robot Vacuum S10 (ijai.vacuum.v17) can stop the map upload to the Xiaomi cloud with the command set_properties[{"did":"map_uploads","siid":10,"piid":23,"value":1}] on the actions#commands channel (value 0 enables it again). Stopping the map upload deactivates the map functions and clears the map data, so it is not offered as a channel. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action either; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Mijia Robot Vacuum-Mop 3Cmiio:basicijai.vacuum.v18YesUse the clean_rooms channel with comma separated room ids to clean specific rooms. The Xiaomi Robot Vacuum S10 (ijai.vacuum.v17) can stop the map upload to the Xiaomi cloud with the command set_properties[{"did":"map_uploads","siid":10,"piid":23,"value":1}] on the actions#commands channel (value 0 enables it again). Stopping the map upload deactivates the map functions and clears the map data, so it is not offered as a channel. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action either; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Xiaomi Robot Vacuum-Mop 2Smiio:basicijai.vacuum.v19YesUse the clean_rooms channel with comma separated room ids to clean specific rooms. The Xiaomi Robot Vacuum S10 (ijai.vacuum.v17) can stop the map upload to the Xiaomi cloud with the command set_properties[{"did":"map_uploads","siid":10,"piid":23,"value":1}] on the actions#commands channel (value 0 enables it again). Stopping the map upload deactivates the map functions and clears the map data, so it is not offered as a channel. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action either; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
IKEA E27 white spectrum opalmiio:lumiikea.light.led1545g12ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E27 white spectrum clearmiio:lumiikea.light.led1546g12ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E14 white spectrummiio:lumiikea.light.led1536g5ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA GU10 white spectrummiio:lumiikea.light.led1537r6ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E27 warm whitemiio:lumiikea.light.led1623g12ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA GU10 warm whitemiio:lumiikea.light.led1650r5ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E14 warm whitemiio:lumiikea.light.led1649c5ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
leshow fanmiio:basicleshow.fan.ss4ExperimentalThe Mi Home app sends the commands of this device via the cloud, so it may not accept local commands. If it does not respond, set the communication method of the thing to cloud (advanced thing configuration, requires the Cloud Connector). The device only accepts commands while it is switched on.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Wall Switch(No Neutral, Single Rocker)miio:unsupportedlumi.ctrl_neutral1.v1No
Aqara Wall Switch (No Neutral, Double Rocker)miio:unsupportedlumi.ctrl_neutral2.v1No
Xiaomiyoupin Curtain Controller (Wi-Fi)miio:basiclumi.curtain.hagl05ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Curtain Controller A1miio:basiclumi.curtain.hagl08Yes
Mi Smart Home Hubmiio:gatewaylumi.gateway.mgl03ExperimentalUsed to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home Gateway Hubmiio:gatewaylumi.gateway.mieu01YesUsed to control the gateway itself. Experimental support for controlling lumi subdevices
Mi smart Home Gateway Hub v1miio:gatewaylumi.gateway.v1ExperimentalUsed to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home GatewayHub v2miio:gatewaylumi.gateway.v2ExperimentalUsed to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home Gateway Hub v3miio:gatewaylumi.gateway.v3ExperimentalUsed to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara LED Light Bulb (Tunable White)miio:lumilumi.light.aqcn02ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Door lockmiio:lumilumi.lock.v1ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door Lockmiio:lumilumi.lock.aq1ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door Lock S2miio:lumilumi.lock.acn02ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door lock S2 Promiio:lumilumi.lock.acn03ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Plug (Zigbee)miio:lumilumi.plug.mmeu01YesNeeds to have the Xiaomi gateway configured in the binding as bridge.
Mi Window and Door Sensormiio:lumilumi.sensor_magnet.v2YesNeeds to have the Xiaomi gateway configured in the binding as bridge. Note: Won't display the current status. Log only'
Aqara Motion Sensormiio:lumilumi.sensor_motion.aq2YesNeeds to have the Xiaomi gateway configured in the binding as bridge.Note: Won't display the current status, nor trigger events. Log only
Mi Motion Sensormiio:lumilumi.sensor_motion.v2YesNeeds to have the Xiaomi gateway configured in the binding as bridge.Note: Won't display the current status, nor trigger events. Log only
Mi Temperature and Humidity Sensormiio:lumilumi.sensor_ht.v1ExperimentalNeeds to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Water Leak Sensormiio:lumilumi.sensor_wleak.aq1YesNeeds to have the Xiaomi gateway configured in the binding as bridge.
Aqara Temperature and Humidity Sensormiio:lumilumi.weather.v1YesNeeds to have the Xiaomi gateway configured in the binding as bridge.
Midea AC-i Youthmiio:unsupportedmidea.aircondition.v1No
Midea Air Conditioner v2miio:unsupportedmidea.aircondition.v2No
Midea AC-Cool Goldenmiio:unsupportedmidea.aircondition.xa1No
Mi Robot Vacuum-Mop Essentialmiio:basicmijia.vacuum.v2YesThis device may be overwhelmed if refresh is too frequent, slowing down the responses. Suggest to increase refresh time to 120 seconds
Xiaomi Smart Pet Food Feedermiio:basicmmgg.feeder.fi1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispensermiio:basicmmgg.pet_waterer.s1ExperimentalSmart mode runs the pump 10 minutes on and 10 minutes off from 08:00 to 21:59, otherwise 10 minutes on and 50 minutes off.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispensermiio:basicmmgg.pet_waterer.s2ExperimentalSmart mode runs the pump 10 minutes on and 10 minutes off from 08:00 to 21:59, otherwise 10 minutes on and 50 minutes off.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispensermiio:basicmmgg.pet_waterer.s3ExperimentalSmart mode runs the pump 10 minutes on and 10 minutes off from 08:00 to 21:59, otherwise 10 minutes on and 50 minutes off.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
XIAOWAN Smart Pet Water Dispensermiio:basicmmgg.pet_waterer.s4ExperimentalSmart mode runs the pump 10 minutes on and 10 minutes off from 08:00 to 21:59, otherwise 10 minutes on and 50 minutes off.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Pet Fountainmiio:basicmmgg.pet_waterer.wi11YesSmart mode runs the pump 10 minutes on and 10 minutes off from 08:00 to 21:59, otherwise 10 minutes on and 50 minutes off.
MR.BONDmiio:basicmrbond.airer.m0ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BONDmiio:basicmrbond.airer.m1proExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BONDmiio:basicmrbond.airer.m1sExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BONDmiio:basicmrbond.airer.m1superExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
NWT/Widetech Intelligent Dehumidifier 16Lmiio:basicnwt.derh.16lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
NWT/Widetech Internet Air Clean Dehumidifier 24Lmiio:basicnwt.derh.24wu1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
NWT/Widetech Internet Dehumidifier 12Lmiio:basicnwt.derh.312enExperimentalThe thing may need to communicate via the cloud, as reported for nwt.derh.330ef.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
NWT/Widetech Internet Dehumidifier 30Lmiio:basicnwt.derh.330efYesReported to work only when the thing is configured to communicate via the cloud.
Lumias 20L Dehumidifiermiio:basicnwt.derh.las20lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 12L Dehumidifiermiio:basicnwt.derh.lua12lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 30L Dehumidifiermiio:basicnwt.derh.lua30lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 12Lmiio:basicnwt.derh.lus12lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 20Lmiio:basicnwt.derh.lus20lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 26L Dehumidifiermiio:basicnwt.derh.lus24lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 30L Dehumidifiermiio:basicnwt.derh.lus30lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Lumias 60Lmiio:basicnwt.derh.lus60lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
NWT/Widetech Intelligent Dehumidifier 12Lmiio:basicnwt.derh.nwt12lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
NWT/Widetech Internet Dehumidifier 18Lmiio:basicnwt.derh.wdh318efw1Yes
Xiaomi Smart Sleep and Wake-up Lightmiio:basicphilips.light.aibedExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Living room 80Wmiio:basicphilips.light.bceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Bedroom 40Wmiio:basicphilips.light.bceil1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Bedroom 28Wmiio:basicphilips.light.bceil2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Bedroom 40Wmiio:basicphilips.light.bceiling1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Bedroom 28Wmiio:basicphilips.light.bceiling2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips BlueSky Lampmiio:basicphilips.light.blueExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Blue Sky G2miio:basicphilips.light.blue1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling lamp FL2 80Wmiio:basicphilips.light.boc1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling lamp FL2 40Wmiio:basicphilips.light.boc2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling lamp FL2 28Wmiio:basicphilips.light.boc3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiRui E27 bulbmiio:basicphilips.light.bulbYes
Philips ZhiRui E14 Candle Lamp Frosted versionmiio:basicphilips.light.candleYes
Philips ZhiRui E14 Candle Lamp Crystal versionmiio:basicphilips.light.candle2Yes
Mijia Philips Color Bulbmiio:basicphilips.light.cbulbYes
Philips Lightmiio:basicphilips.light.cbulbsYes
Philips PingYi Ceiling Light 130Wmiio:basicphilips.light.ce130cExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips YingLe Ceiling Light 130Wmiio:basicphilips.light.ce130xExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiBai Ceiling Light 130Wmiio:basicphilips.light.ce13zxExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips XingHuan Ceiling Light 36Wmiio:basicphilips.light.ce36cExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips YingLe Ceiling Light 36Wmiio:basicphilips.light.ce36xExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips XingHuan Ceiling Light 48Wmiio:basicphilips.light.ce48cExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiBai Ceiling Light 48Wmiio:basicphilips.light.ce48xExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips XingHuan Ceiling Light 80Wmiio:basicphilips.light.ce80cExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips YingLe Ceiling Light 80Wmiio:basicphilips.light.ce80ycExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi & Philips Ceiling Lamp Lamina 33Wmiio:basicphilips.light.ceil33ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Smart Lightmiio:basicphilips.light.ceilfiExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Connected Ceilingmiio:basicphilips.light.ceilingYes
Mi & Philips Ceiling Lamp Lamina 80Wmiio:basicphilips.light.ceilpExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom Smiio:basicphilips.light.ceilzExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom Lmiio:basicphilips.light.ceilz1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Jianyue G2 Living Room Smiio:basicphilips.light.ceilz2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Jianyue G2 Living Room Lmiio:basicphilips.light.ceilz3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Lightmiio:basicphilips.light.dcolorYes
ZhiRui Dimmable Downlightmiio:basicphilips.light.dlightExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiRui Downlightmiio:basicphilips.light.downlightYes
Philips C9 Ceiling Light 120Wmiio:basicphilips.light.eceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips C9 Ceiling Light 55Wmiio:basicphilips.light.ecl01ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips C9 Panel Light 24Wmiio:basicphilips.light.epanExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips F9 Lite Floor Lightmiio:basicphilips.light.flExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zeeray Fall Detection Panel Lightmiio:basicphilips.light.flatExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Wi-Fi bulb E27 Whitemiio:basicphilips.light.hbulbYes
Philips ZhiYi Ceiling Lamp FL 40Wmiio:basicphilips.light.lnblight1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling Lamp FL 28Wmiio:basicphilips.light.lnblight2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling Lamp FL 80Wmiio:basicphilips.light.lnlrlightExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Living room 80Wmiio:basicphilips.light.lrceilingExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Liuying G2 Living Room Lmiio:basicphilips.light.lying1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Liuying G2 Living Room Smiio:basicphilips.light.lying2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Liuying G2 Bedroom Lmiio:basicphilips.light.lying3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Liuying G2 Bedroom Smiio:basicphilips.light.lying4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 80Wmiio:basicphilips.light.mceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 40Wmiio:basicphilips.light.mceilmExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 28Wmiio:basicphilips.light.mceilsExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Shadow 80Wmiio:basicphilips.light.mm1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Shadow 40Wmiio:basicphilips.light.mm2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Shadow 28Wmiio:basicphilips.light.mm3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Smart Lampmiio:basicphilips.light.mono1Yes
Philips ZhiRui Bedside Lampmiio:basicphilips.light.moonlightYes
Zhirui Ceiling Lamp Black 80Wmiio:basicphilips.light.obceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Black 40Wmiio:basicphilips.light.obceimExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Black 28Wmiio:basicphilips.light.obceisExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart LED Ceiling Light Pro (Living Room)miio:basicphilips.light.pceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips sustainable pendent lightmiio:basicphilips.light.pceil1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart LED Ceiling Light Pro (Bedroom)miio:basicphilips.light.pceilbExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Piano Lightmiio:basicphilips.light.pianoExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Philips Study Desk Lampmiio:basicphilips.light.rwreadYes
Zhirui Ceiling Lamp Starry 80Wmiio:basicphilips.light.sceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Starry 40Wmiio:basicphilips.light.sceilmExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Starry 28Wmiio:basicphilips.light.sceilsExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips EyeCare Connected Desk Lamp gen2.miio:basicphilips.light.sread1Yes
Mijia Philips Desk Lamp 2Smiio:basicphilips.light.sread2Yes
Mijia Philips Desk Lamp 3miio:basicphilips.light.sread3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
ZhiRui read & write Desk Lamp Wi-Fimiio:basicphilips.light.sread4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Desk Lamp 2Smiio:basicphilips.light.sread6ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhixiu Desk Lampmiio:basicphilips.light.sread8ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart LED Desk Lamp Pro (Reading Version)miio:basicphilips.light.sread9ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips F9 Floor Lightmiio:basicphilips.light.streetExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
ZhiRui RGB stripmiio:basicphilips.light.strip2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Lightstrip Promiio:basicphilips.light.strip3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Lightstrip Promiio:basicphilips.light.strip5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Connected Lightsmiio:basicphilips.light.virtualYes
Zhirui Ceiling Lamp Gorgeous 80Wmiio:basicphilips.light.xzceilExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Gorgeous 40Wmiio:basicphilips.light.xzceimExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Gorgeous 28Wmiio:basicphilips.light.xzceisExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Halo 80Wmiio:basicphilips.light.yb1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Halo 40Wmiio:basicphilips.light.yb2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Halo 28Wmiio:basicphilips.light.yb3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling lampmiio:basicphilips.light.zyceilingYes
Philips ZhiYi Desk Lampmiio:basicphilips.light.zysreadYes
Philips ZhiYi Stripmiio:basicphilips.light.zystripYes
Xiaomi Smart Plug 2miio:basicqmi.plug.tw02ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
CHINGMI Smart Power Strip v1miio:basicqmi.powerstrip.v1Yes
Rockrobo Xiaowa Sweeper v2miio:unsupportedroborock.sweeper.e2v2No
Rockrobo Xiaowa Sweeper v3miio:unsupportedroborock.sweeper.e2v3No
Roborock E Seriesmiio:vacuumroborock.vacuum.a01Yes
Roborock S5 Maxmiio:vacuumroborock.vacuum.a05Yes
Roborock S6 Puremiio:vacuumroborock.vacuum.a08Yes
Roborock T7 Promiio:vacuumroborock.vacuum.a09Yes
Roborock S6 MaxVmiio:vacuumroborock.vacuum.a10Yes
Roborock T7miio:vacuumroborock.vacuum.a11Yes
Roborock T7Smiio:vacuumroborock.vacuum.a14Yes
Roborock S7miio:vacuumroborock.vacuum.a15Yes
Roborock S4 Maxmiio:vacuumroborock.vacuum.a19Yes
Roborock T7S Plusmiio:vacuumroborock.vacuum.a23Yes
Roborock T7S Plusmiio:vacuumroborock.vacuum.a24Yes
Roborock G10S Promiio:vacuumroborock.vacuum.a26Yes
Roborock S7 MaxVmiio:vacuumroborock.vacuum.a27Yes
Roborock G10miio:vacuumroborock.vacuum.a29Yes
Roborock G10miio:vacuumroborock.vacuum.a30Yes
Roborock Q5miio:vacuumroborock.vacuum.a33Yes
Roborock Q5miio:vacuumroborock.vacuum.a34Yes
Roborock T8miio:vacuumroborock.vacuum.a37Yes
Roborock Q7 Maxmiio:vacuumroborock.vacuum.a38Yes
Roborock Q7miio:vacuumroborock.vacuum.a39Yes
Roborock Q7miio:vacuumroborock.vacuum.a40Yes
Roborock G10Smiio:vacuumroborock.vacuum.a46Yes
Roborock G10Smiio:vacuumroborock.vacuum.a47Yes
Roborock S8miio:vacuumroborock.vacuum.a50Yes
Roborock S8miio:vacuumroborock.vacuum.a51Yes
Roborock T8 Plusmiio:vacuumroborock.vacuum.a52Yes
Roborock S7 Pro Ultramiio:vacuumroborock.vacuum.a62Yes
Roborock G10S Puremiio:vacuumroborock.vacuum.a64Yes
Roborock S7 Max Ultramiio:vacuumroborock.vacuum.a65Yes
Roborock G10 Plusmiio:vacuumroborock.vacuum.a66Yes
Roborock G20miio:vacuumroborock.vacuum.a68Yes
Roborock G20miio:vacuumroborock.vacuum.a69Yes
Roborock S8 Pro Ultramiio:vacuumroborock.vacuum.a70Yes
Roborock Q5 Promiio:vacuumroborock.vacuum.a72Yes
Roborock Q8 Maxmiio:vacuumroborock.vacuum.a73Yes
Roborock P10miio:vacuumroborock.vacuum.a74Yes
Roborock Qrevomiio:vacuumroborock.vacuum.a75Yes
Roborock G10S Automiio:vacuumroborock.vacuum.a76Yes
Roborock Q5 Promiio:vacuumroborock.vacuum.a84Yes
Roborock Q8 Maxmiio:vacuumroborock.vacuum.a85Yes
Xiaowa C1miio:vacuumroborock.vacuum.c1Yes
Roborock Xiaowa E Series Vacuum v2miio:unsupportedroborock.vacuum.e2No
Mi Robot Vacuum 1Smiio:vacuumroborock.vacuum.m1sYes
Roborock P5miio:vacuumroborock.vacuum.p5Yes
Roborock S5 Maxmiio:vacuumroborock.vacuum.p6Yes
Roborock S4miio:vacuumroborock.vacuum.s4Yes
Roborock Vacuum S4v2miio:vacuumroborock.vacuum.s4v2Yes
Roborock S5miio:vacuumroborock.vacuum.s5Yes
Roborock S5 Maxmiio:vacuumroborock.vacuum.s5eYes
Roborock S6miio:vacuumroborock.vacuum.s6Yes
Roborock T4miio:vacuumroborock.vacuum.t4Yes
Roborock Vacuum T4 v2miio:vacuumroborock.vacuum.t4v2Yes
Roborock Vacuum T4 v3miio:vacuumroborock.vacuum.t4v3Yes
Roborock T6miio:vacuumroborock.vacuum.t6Yes
Roborock Vacuum T6 v2miio:vacuumroborock.vacuum.t6v2Yes
Roborock Vacuum T6 v3miio:vacuumroborock.vacuum.t6v3Yes
Roborock Vacuum T7miio:vacuumroborock.vacuum.t7Yes
Roborock Vacuum T7pmiio:vacuumroborock.vacuum.t7pYes
Roborock Vacuum T7 v2miio:vacuumroborock.vacuum.t7pv2Yes
Roborock Vacuum T7 v3miio:vacuumroborock.vacuum.t7pv3Yes
Roborock Vacuum T7 v2miio:vacuumroborock.vacuum.t7v2Yes
Roborock Vacuum T7 v3miio:vacuumroborock.vacuum.t7v3Yes
Roborock Vacuum S6miio:vacuumrockrobo.vacuum.s6Yes
Mi Robot Vacuummiio:vacuumrockrobo.vacuum.v1Yes
ROIDMI EVEmiio:basicroidmi.vacuum.r1bYes
ROIDMI EVE MAXmiio:basicroidmi.vacuum.sdj60ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
ROIDMI EVE vacuummiio:basicroidmi.vacuum.v60Yes
ROIDMI EVE CCmiio:basicroidmi.vacuum.v62ExperimentalUse the clean_rooms channel with comma separated room ids to clean specific rooms. Resetting the map deletes the saved map with its rooms and zones, so it is not offered as an action; send action{"did":"actions","siid":10,"aiid":10,"in":[]} on the actions#commands channel to do it.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
ROIDMI VACUUM EVE ROOKmiio:basicroidmi.vacuum.v63ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
ROIDMI EVAmiio:basicroidmi.vacuum.v66ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
One Intelligent switch(WIFI)miio:basic090615.switch.switch01Yes
Two Intelligent Switch (WIFI)miio:basic090615.switch.switch02Yes
Three Intelligent switch(WIFI)miio:basic090615.switch.switch03Yes
PTX OneKey Switch (WIFI)miio:basic090615.switch.xswitch01Yes
PTX Twokey switch(wifi)miio:basic090615.switch.xswitch02Yes
PTX ThreeKey Switch (WIFI)miio:basic090615.switch.xswitch03Yes
SCISHARE Smart Capsule Coffee Machinemiio:basicscishare.coffee.s1102ExperimentalDrinks are made with the app's default recipe values. The machine must be on and ready (status Ready).
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Scishare Smart Capsule Coffee Machinemiio:basicscishare.coffee.s1301ExperimentalDrinks are made with the app's default recipe values. The machine must be on and ready (status Ready).
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Soocare Electric Toothbrushmiio:unsupportedsoocare.toothbrush.x3No
TINYMU Smart Toiletmiio:basictinymu.toiletlid.v1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Dishwasher (4 Dining Sets)miio:basicviomi.dishwasher.m02ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Internet Refrigerator iLive(French style 462L)miio:unsupportedviomi.fridge.v3No
Viomi sweeper PROmiio:basicviomi.vacuum.v3Yes
Viomi Cleaning Robot V-RVCLM21Bmiio:basicviomi.vacuum.v6Yes
Mi Robot Vacuum-Mop Pmiio:basicviomi.vacuum.v7Yes
Mi Robot Vacuum-Mop Pmiio:basicviomi.vacuum.v8Yes
Mi Robot Vacuum-Mop Pmiio:basicviomi.vacuum.v9Yes
Viomi Robot Vacuum (viomi.vacuum.v10)miio:basicviomi.vacuum.v10Yes
Viomi V-SLAM Robot Vacuummiio:basicviomi.vacuum.v11ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Cleaning Robot X2miio:basicviomi.vacuum.v12ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi V3miio:basicviomi.vacuum.v13ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Alpha 2 Promiio:basicviomi.vacuum.v15ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Robot Vacuum-Mop JCmiio:basicviomi.vacuum.v17ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi S9miio:basicviomi.vacuum.v18ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi SEmiio:basicviomi.vacuum.v19ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI FIERCE-UVmiio:basicviomi.vacuum.v20ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI ALPHA-UVmiio:basicviomi.vacuum.v21ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Alpha 2 Promiio:basicviomi.vacuum.v22ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI V3 Maxmiio:basicviomi.vacuum.v23ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI 5G IOT LingLi 2miio:basicviomi.vacuum.v24ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI X3miio:basicviomi.vacuum.v25ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Alpha 2 Plusmiio:basicviomi.vacuum.v27ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Eaglemiio:basicviomi.vacuum.v29ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi V2 Maxmiio:basicviomi.vacuum.v35ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi V5miio:basicviomi.vacuum.v36ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Alpha Litemiio:basicviomi.vacuum.v37ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi V5 Promiio:basicviomi.vacuum.v38ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Alpha 2 Pro(WH)miio:basicviomi.vacuum.v40ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Alpha 2 Maxmiio:basicviomi.vacuum.v41ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Auto Cleaning Alpha 3miio:basicviomi.vacuum.v45ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Alpha 3 Promiio:basicviomi.vacuum.v49ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Alpha 2 Litemiio:basicviomi.vacuum.v53ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi V3 Absolutmiio:basicviomi.vacuum.v56ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Viomi Master 10 Maxmiio:basicviomi.vacuum.v60ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Internet Electric Water Heater 1A (60L)miio:basicviomi.waterheater.e1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Internet electric water heater 50L(Premium Version)miio:basicviomi.waterheater.e4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Inverter Air Conditioner (1.5HP)miio:basicxiaomi.aircondition.ma1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1)miio:basicxiaomi.aircondition.ma2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Vertical Air Conditioner (2HP)miio:basicxiaomi.aircondition.ma4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1)miio:basicxiaomi.aircondition.ma5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3)miio:basicxiaomi.aircondition.ma6ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1)miio:basicxiaomi.aircondition.ma9ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1)miio:basicxiaomi.aircondition.mc1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1)miio:basicxiaomi.aircondition.mc2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1)miio:basicxiaomi.aircondition.mc4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1)miio:basicxiaomi.aircondition.mc5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1)miio:basicxiaomi.aircondition.mc6ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1)miio:basicxiaomi.aircondition.mc7ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3)miio:basicxiaomi.aircondition.mc8ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3)miio:basicxiaomi.aircondition.mc9ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1)miio:basicxiaomi.aircondition.c10ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1)miio:basicxiaomi.aircondition.c11ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mh1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mh2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3)miio:basicxiaomi.aircondition.mh3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt7ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1)miio:basicxiaomi.aircondition.mt8ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier 4 Compactmiio:basicxiaomi.airp.cpa4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Air Purifier MAXmiio:basicxiaomi.airp.mb6ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier Elitemiio:basicxiaomi.airp.meb1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Air Purifier Elitemiio:basicxiaomi.airp.meb2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Multifunctional Rice Cookermiio:basicxiaomi.cooker.cmk7ExperimentalCooking can only be started from the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Inverter Dehumidifiermiio:basicxiaomi.derh.30khExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Inverter Dehumidifier 30Lmiio:basicxiaomi.derh.30lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Inverter Purifying Dehumidifier Maxmiio:basicxiaomi.derh.60lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Standing Fan 2 Litemiio:basicxiaomi.fan.2liteExperimentalCreated from the MIoT spec; not checked against the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Standing Fan Promiio:basicxiaomi.fan.p43ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Tower Fan 2miio:basicxiaomi.fan.p45ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Desktop Air Circulation Fanmiio:basicxiaomi.fan.p69ExperimentalCreated from the MIoT spec; not checked against the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Desktop Air Circulation Fanmiio:basicxiaomi.fan.p70ExperimentalCreated from the MIoT spec; not checked against the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Standing Air Circulation Fanmiio:basicxiaomi.fan.p76ExperimentalCreated from the MIoT spec; not checked against the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Standing Fan Pro Slimmiio:basicxiaomi.fan.p85ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Air Circulation Fan Promiio:basicxiaomi.fan.p90ExperimentalThe Mi Home app sets the oscillation angles and the symmetrical flag in one command; here each is sent on its own.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Pet Food Feeder 2miio:basicxiaomi.feeder.iv2001ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Food Feeder 2miio:basicxiaomi.feeder.pi2001ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Dehumidifier 13Lmiio:basicxiaomi.derh.13lExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Dehumidifier Litemiio:basicxiaomi.derh.liteExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Evaporative Humidifiermiio:basicxiaomi.humidifier.3liteExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Mist-Free Humidifier 3 400mL/hmiio:basicxiaomi.humidifier.4liteExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Evaporative Humidifier Promiio:basicxiaomi.humidifier.600ekExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Anti-bacterial Humidifier 2miio:basicxiaomi.humidifier.jsq2gExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Humidifier 2miio:basicxiaomi.humidifier.jsq2wYes
Mijia Mist-Free Humidifier 3 (400)miio:basicxiaomi.humidifier.p3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Quiet Inverter Blender P1miio:basicxiaomi.juicer.dempp1ExperimentalPrograms can only be started from the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Quiet Inverter Blender P1miio:basicxiaomi.juicer.p1v2ExperimentalPrograms can only be started from the Mi Home app.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Electric Hot Water Dispenser 5Lmiio:basicxiaomi.kettle.mek02ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Kettle 2 Promiio:basicxiaomi.kettle.v20ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Kettle 2 Promiio:basicxiaomi.kettle.v21ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Fountain 2miio:basicxiaomi.pet_waterer.70m2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Pet Fountain 2miio:basicxiaomi.pet_waterer.iv02ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Wi-Fi Repeater 2miio:unsupportedxiaomi.repeater.v2No
Xiaomi Robot Vacuum T12miio:basicxiaomi.vacuum.b106bkYesExample command for room cleaning xiaomi_robot_execute.sendCommand('action{"siid":7,"aiid":3,"in":[{"piid":24,"value":"11,12,etc room ids"},{"piid":25,"value":0},{"piid":26,"value":1}]}')
Xiaomi Robot Vacuum S12miio:basicxiaomi.vacuum.b106euYesExample command for room cleaning xiaomi_robot_execute.sendCommand('action{"siid":7,"aiid":3,"in":[{"piid":24,"value":"11,12,etc room ids"},{"piid":25,"value":0},{"piid":26,"value":1}]}')
Xiaomi Robot Vacuum S20+miio:basicxiaomi.vacuum.b108glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum E10miio:basicxiaomi.vacuum.b112ExperimentalExample command for room cleaning xiaomi_robot_execute.sendCommand('action{"siid":7,"aiid":3,"in":[{"piid":24,"value":"11,12,etc room ids"},{"piid":25,"value":0},{"piid":26,"value":1}]}'), the cleaning mode (piid 25) is 0 for all areas, 2 for edge and 4 for spiral. The direction channel can only be written, the device does not report its state.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum E10Cmiio:basicxiaomi.vacuum.b112bkExperimentalExample command for room cleaning xiaomi_robot_execute.sendCommand('action{"siid":7,"aiid":3,"in":[{"piid":24,"value":"11,12,etc room ids"},{"piid":25,"value":0},{"piid":26,"value":1}]}'), the cleaning mode (piid 25) is 0 for all areas, 2 for edge and 4 for spiral. The direction channel can only be written, the device does not report its state.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum E12miio:basicxiaomi.vacuum.b112glExperimentalExample command for room cleaning xiaomi_robot_execute.sendCommand('action{"siid":7,"aiid":3,"in":[{"piid":24,"value":"11,12,etc room ids"},{"piid":25,"value":0},{"piid":26,"value":1}]}'), the cleaning mode (piid 25) is 0 for all areas, 2 for edge and 4 for spiral. The direction channel can only be written, the device does not report its state.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum X20+miio:basicxiaomi.vacuum.c102glYes
Mijia Robot Vacuum M30 Promiio:basicxiaomi.vacuum.c107ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum E5miio:basicxiaomi.vacuum.c108ExperimentalThe direction channel can only be written, the device does not report its state.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum X20 Promiio:basicxiaomi.vacuum.d102glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S20miio:basicxiaomi.vacuum.d106glExperimentalExample command for room cleaning xiaomi_robot_execute.sendCommand('action{"siid":7,"aiid":3,"in":[{"piid":24,"value":"11,12,etc room ids"},{"piid":25,"value":0},{"piid":26,"value":1}]}'). The direction, carpet avoidance, carpet display and map upload channels can only be written, the device does not report their state.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum X20 Maxmiio:basicxiaomi.vacuum.d109glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum M40miio:basicxiaomi.vacuum.d110chExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S40Cmiio:basicxiaomi.vacuum.e101gbExperimentalDust collection (the action and the auto dust collection settings) is only available on models with the dust collection base station, like the H40.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum 5 Promiio:basicxiaomi.vacuum.ov21cnExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum 5 Promiio:basicxiaomi.vacuum.ov21glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum 5miio:basicxiaomi.vacuum.ov31glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum H50 Promiio:basicxiaomi.vacuum.ov42glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum H50miio:basicxiaomi.vacuum.ov43gbExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum H40miio:basicxiaomi.vacuum.ov51glExperimentalDust collection (the action and the auto dust collection settings) is only available on models with the dust collection base station, like the H40.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S40 Promiio:basicxiaomi.vacuum.ov71glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S40miio:basicxiaomi.vacuum.ov81glExperimentalDust collection (the action and the auto dust collection settings) is only available on models with the dust collection base station, like the H40.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum 6 Maxmiio:basicxiaomi.vacuum.pv11cnExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum 6 Maxmiio:basicxiaomi.vacuum.pv11glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Robot Vacuum 6 Promiio:basicxiaomi.vacuum.pv21cnExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum 6 Promiio:basicxiaomi.vacuum.pv21glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum 6miio:basicxiaomi.vacuum.pv32glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S60+miio:basicxiaomi.vacuum.pv51glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Robot Vacuum S60miio:basicxiaomi.vacuum.pv81glExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Water Purifier N800Gmiio:basicxiaomi.waterpuri.cmn800ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Network Speakermiio:unsupportedxiaomi.wifispeaker.v1No
Uclean Smart Toilet Seatmiio:basicxjx.toilet.proExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Uclean Smart Toilet puremiio:basicxjx.toilet.pureExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Uclean Smart Toilet relaxmiio:basicxjx.toilet.relaxExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Whale Spout Smart Toilet Zeromiio:basicxjx.toilet.zeroExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Bath Heatermiio:unsupportedyeelight.bhf_light.v2No
Yeelight Smart Bath Heater Promiio:basicyeelink.bhf_light.v1Yes
Yeelight Smart Bath Heatermiio:basicyeelink.bhf_light.v2Yes
Mi Bedside Lampmiio:basicyeelink.light.bslamp1YesThe color temperature range is 2700-6500 K for lamp10. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi Bedside Lamp 2miio:basicyeelink.light.bslamp2YesThe color temperature range is 2700-6500 K for lamp10. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Smart Lamp D2miio:basicyeelink.light.bslamp3YesThe color temperature range is 2700-6500 K for lamp10. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Light Promiio:basicyeelink.light.ceilaYes
Yeelight Arwen Ceiling Lightmiio:basicyeelink.light.ceilbYes
Yeelight Ceiling Lightmiio:basicyeelink.light.ceiling1YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Light SEmiio:basicyeelink.light.ceiling2YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Lightmiio:basicyeelink.light.ceiling3YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Lightmiio:basicyeelink.light.ceiling4YesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Ambi Lampmiio:basicyeelink.light.ceiling4.ambiYesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi LED Ceiling Lightmiio:basicyeelink.light.ceiling5YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight HaoShi LED Ceiling Lamp Promiio:basicyeelink.light.ceiling6YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Haoshi Ceiling Lampmiio:basicyeelink.light.ceiling7YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
LED Ceiling Light Crystal Plusmiio:basicyeelink.light.ceiling8YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight HaoShi LED Ceiling Lamp Promiio:basicyeelink.light.ceiling9YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Crystal Pendant Lampmiio:basicyeelink.light.ceiling10YesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Ambi Lampmiio:basicyeelink.light.ceiling10.ambiYesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Light 320 1Smiio:basicyeelink.light.ceiling11YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Stylized Ceiling Light Promiio:basicyeelink.light.ceiling12YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Lightmiio:basicyeelink.light.ceiling13YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Light Minimiio:basicyeelink.light.ceiling14YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Light 480 1Smiio:basicyeelink.light.ceiling15YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Xingyu Ceiling Lightmiio:basicyeelink.light.ceiling16YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight ShaoHua Celing Lightmiio:basicyeelink.light.ceiling17YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Light Promiio:basicyeelink.light.ceiling18YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Light Promiio:basicyeelink.light.ceiling19YesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Ambi Lampmiio:basicyeelink.light.ceiling19.ambiYesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Ceiling Lightmiio:basicyeelink.light.ceiling20YesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Ceiling Ambi Lampmiio:basicyeelink.light.ceiling20.ambiYesOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi Smart LED Living Room Ceiling Lightmiio:basicyeelink.light.ceiling21YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi Smart LED Ceiling Lightmiio:basicyeelink.light.ceiling22YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi Smart LED Ceiling Light (350mm)miio:basicyeelink.light.ceiling23YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Jade Smart LED Ceiling Light C2001miio:basicyeelink.light.ceil26YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi Smart LED Ceiling Light (350mm)miio:basicyeelink.light.ceil34ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Ceiling Light Promiio:basicyeelink.light.ceil39YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Arwen Ceiling Light Dmiio:basicyeelink.light.ceil43ExperimentalOther scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Color Bulbmiio:basicyeelink.light.color1YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Bulb (Color)miio:basicyeelink.light.color2YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi LED Smart Bulb (White and Color)miio:basicyeelink.light.color3YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Bulb 1S(Color)miio:basicyeelink.light.color4YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Mi Smart LED Bulb Essential (White and Color)miio:basicyeelink.light.color5YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Smart LED Bulb 1SE (color)miio:basicyeelink.light.coloraYesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Smart LED Bulb W3 (color)miio:basicyeelink.light.colorbYesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight GU10 Smart Bulb W1 (Multicolor)miio:basicyeelink.light.colorcYesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Bulb (Tunable)miio:basicyeelink.light.ct2YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight LED Smart Bulb W3 (Tunable White)miio:basicyeelink.light.ctaYesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight Smart Ceiling Fan S2001miio:basicyeelink.light.fancl2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi LED Desk Lampmiio:basicyeelink.light.lamp1YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Mi Smart LED Desk Lamp Promiio:basicyeelink.light.lamp2YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight LED Lampmiio:basicyeelink.light.lamp3Yes
Mi LED Desk Lamp 1Smiio:basicyeelink.light.lamp4YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight Smart Desk Lamp Primemiio:basicyeelink.light.lamp5Yes
Yeelightmiio:basicyeelink.light.lamp6YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight LED Light Sensor Desk Lamp V1miio:basicyeelink.light.lamp7YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelightmiio:basicyeelink.light.lamp8YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight Star LED Table Lampmiio:basicyeelink.light.lamp9YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Star Floor Lampmiio:basicyeelink.light.lamp10YesThe color temperature range is 2700-6500 K for lamp10. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Screen Light Barmiio:basicyeelink.light.lamp15Yes
Yeelight Bulbmiio:basicyeelink.light.mono1Yes
Yeelight White Bulb v2miio:basicyeelink.light.mono2Yes
Yeelight LED Bulb 1S(Dimmable)miio:basicyeelink.light.mono4Yes
Yeelight LED Filament Bulbmiio:basicyeelink.light.mono5Yes
Mi Smart LED Bulbmiio:basicyeelink.light.mono6Yes
Yeelight LED smart bulb W3(dimmable)miio:basicyeelink.light.monoaYes
Yeelight GU10 Smart Bulb W1(dimmable)miio:basicyeelink.light.monobYes
Yeelight Whiteglow Panel Lightmiio:basicyeelink.light.panel1YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Lightstripmiio:basicyeelink.light.strip1YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Lightstrip Plusmiio:basicyeelink.light.strip2YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Willow LED Lightstripmiio:basicyeelink.light.strip4YesThe color temperature range differs per model: 2500-4800 K (lamp2), 2600-5000 K (lamp4), 3000-5000 K (lamp7), 2700-6500 K (others)
Yeelight LED Lightstrip 1Smiio:basicyeelink.light.strip6YesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight LED Lightstrip 1Smiio:basicyeelink.light.stripaYesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Xiaomi Smart Lightstripmiio:basicyeelink.light.stripbExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Light Group (Mi & Yeelight)miio:basicyeelink.light.virtualYesThe color temperature range is 2700-6500 K for color1, colorc, strip1, stripa and virtual. Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yeelight Smart Dual Control Modulemiio:basicyeelink.switch.sw1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Speakermiio:unsupportedyeelink.wifispeaker.v1No
Yilai Ceiling Light Aiyue 480miio:basicyilai.light.ceiling1YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yilai Ceiling Lamp Hefeng 430miio:basicyilai.light.ceiling2YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Yilai Ceiling Lamp Hefeng Promiio:basicyilai.light.ceiling3YesThe color temperature range differs per model: 2700-5700 K (ceiling5), 3000-5700 K (ceiling16, ceiling17), 2700-6300 K (ceiling21), 2700-6000 K (ceiling22, ceiling23), 2700-6500 K (others). Other scenes can be sent with the commands channel, for example set_scene["ct",3000,50] or set_scene["auto_delay_off",50,10] (brightness 50%, off after 10 minutes)
Xiaomi Smart Kettle 2 Promiio:basicyunmi.kettle.v19ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx2miio:basicyunmi.waterpuri.lx2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under Counter)miio:basicyunmi.waterpuri.lx3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx4miio:basicyunmi.waterpuri.lx4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 1A/400G Promiio:basicyunmi.waterpuri.lx5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under Counter)miio:basicyunmi.waterpuri.lx6ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 500G/500G Promiio:basicyunmi.waterpuri.lx7ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 600Gmiio:basicyunmi.waterpuri.lx8Yes
Mi Water Purifier D1miio:basicyunmi.waterpuri.lx9ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx10miio:basicyunmi.waterpuri.lx10ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier C1 (Triple Setting)miio:basicyunmi.waterpuri.lx11ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier S1miio:basicyunmi.waterpuri.lx12ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v1miio:basicyunmi.waterpurifier.v1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v2miio:basicyunmi.waterpurifier.v2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under sink) v3miio:basicyunmi.waterpurifier.v3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v4miio:basicyunmi.waterpurifier.v4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Ventilation Systemmiio:basiczhimi.airfresh.va2Yes
Smartmi Fresh Air System (Heating)miio:basiczhimi.airfresh.va4Yes
Mi Fresh Air Ventilator C1-80miio:basiczhimi.airfresh.ua1Yes
Mi PM2.5 Air Quality Monitormiio:basiczhimi.airmonitor.v1Yes
Xiaomi Smart Air Purifier 4 Compactmiio:basiczhimi.airp.cpa4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 3/3Hmiio:basiczhimi.airp.mb3aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 3Cmiio:basiczhimi.airp.mb4aYes
Xiaomi Smart Air Purifier 4miio:basiczhimi.airp.mb5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier 4miio:basiczhimi.airp.mb5aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier Elitemiio:basiczhimi.airp.meb1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier 4 Litemiio:basiczhimi.airp.rmb1YesThis device may not work with direct connection hence require cloud connection
Xiaomi Smart Air Purifier 4 Promiio:basiczhimi.airp.va2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier 4 Promiio:basiczhimi.airp.va2aExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Smart Air Purifier 4 Promiio:basiczhimi.airp.vb4Yes
Mi Air Purifier 2 (mini)miio:basiczhimi.airpurifier.m1Yes
Mi Air Purifier 2miio:basiczhimi.airpurifier.m2Yes
Mi Air Purifier 2Smiio:basiczhimi.airpurifier.ma1Yes
Mi Air Purifier 2Smiio:basiczhimi.airpurifier.ma2Yes
Mi Air Purifier 3miio:basiczhimi.airpurifier.ma4ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 2Smiio:basiczhimi.airpurifier.mb1Yes
Mi Air Purifier 3/3Hmiio:basiczhimi.airpurifier.mb3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 3Cmiio:basiczhimi.airpurifier.mb4Yes
Mi Air Purifier 2Smiio:basiczhimi.airpurifier.mc1Yes
Mi Air Purifier 2Hmiio:basiczhimi.airpurifier.mc2Yes
Xiaomi Smart Air Purifier 4 Litemiio:basiczhimi.airpurifier.rma1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier Supermiio:basiczhimi.airpurifier.sa1Yes
Mi Air Purifier MAX / MAX Promiio:basiczhimi.airpurifier.sa2Yes
Mi Air Purifier v1miio:basiczhimi.airpurifier.v1Yes
Mi Air Purifier v2miio:basiczhimi.airpurifier.v2Yes
Mi Air Purifier v3miio:basiczhimi.airpurifier.v3Yes
Mi Air Purifier v5miio:basiczhimi.airpurifier.v5Yes
Mi Air Purifier Pro v6miio:basiczhimi.airpurifier.v6Yes
Mi Air Purifier Pro v7miio:basiczhimi.airpurifier.v7Yes
Mi Air Purifier Pro Hmiio:basiczhimi.airpurifier.va1Yes
Mi Air Purifier Pro Hmiio:basiczhimi.airpurifier.vb2Yes
Mi Air Purifier virtualmiio:unsupportedzhimi.airpurifier.virtualNo
Mi Air Purifier 2(Virtual)miio:unsupportedzhimi.airpurifier.vtl_m1No
Smartmi Air Purifiermiio:basiczhimi.airpurifier.za1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Standing Fanmiio:basiczhimi.fan.sa1Yes
Mi Smart Fanmiio:basiczhimi.fan.v1Yes
Smartmi DC Pedestal Fanmiio:basiczhimi.fan.v2Yes
Smartmi DC Pedestal Fanmiio:basiczhimi.fan.v3Yes
Smartmi Inverter Pedestal Fanmiio:basiczhimi.fan.za1Yes
Smartmi Standing Fan 2miio:basiczhimi.fan.za3Yes
Smartmi Standing Fan 2Smiio:basiczhimi.fan.za4Yes
Smartmi Standing Fan 3miio:basiczhimi.fan.za5ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Space Heater Smiio:basiczhimi.heater.ma2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Baseboard Heater Emiio:basiczhimi.heater.ma3ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Space Heater Smiio:basiczhimi.heater.mc2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Fanmiio:basiczhimi.heater.na1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Fan Heatermiio:basiczhimi.heater.nb1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Radiant Heater Smart Versionmiio:basiczhimi.heater.za1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Convector Heater 1Smiio:basiczhimi.heater.za2ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Convector Heater 1Smiio:basiczhimi.heater.zb1ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Evaporative Humidifiermiio:basiczhimi.humidifier.ca1Yes
Smartmi Evaporative Humidifer 2miio:basiczhimi.humidifier.ca4Yes
Smartmi Evaporative Humidifier 3miio:basiczhimi.humidifier.ca6ExperimentalExperimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Evaporative Humidifiermiio:basiczhimi.humidifier.cb1Yes
Smartmi Evaporative Humidifiermiio:basiczhimi.humidifier.cb2Yes
Smartmi Humidifiermiio:basiczhimi.humidifier.v1Yes
Mi AI Alarmmiio:unsupportedzimi.clock.myk01No
Mi Smart Power Stripmiio:basiczimi.powerstrip.v2Yes

note: Supported means we received feedback from users this device is working with the binding. For devices with experimental support, we did not yet confirmation that channels are correctly working. Please feedback your findings for these devices (e.g. Are all channels working, do they contain the right information, is controlling the devices working etc.)

Channels ​

Depending on the device, different channels are available.

All devices have available the following channels (marked as advanced) besides the device specific channels

ChannelTypeDescription
network#ssidStringNetwork SSID
network#bssidStringNetwork BSSID
network#rssiNumberNetwork RSSI
network#lifeNumberNetwork Life
actions#commandsStringsend commands direct. see below
actions#rpcStringsend commands via cloud. see below

note: the ADVANCED actions#commands and actions#rpc channels can be used to send commands that are not automated via the binding. This is available for all devices e.g. openhab:send actionCommand 'upd_timer["1498595904821", "on"]' would enable a pre-configured timer. See https://github.com/marcelrv/XiaomiRobotVacuumProtocol for all known available commands.

Roborock Vacuum Channels ​

TypeChannelDescription
Numberstatus#segment_statusSegment Status
Numberstatus#map_statusMap Box Status
Numberstatus#led_statusLed Box Status
Stringinfo#carpet_modeCarpet Mode details
Stringinfo#fw_featuresFirmware Features
Stringinfo#room_mappingRoom Mapping details
Stringinfo#multi_maps_listMaps Listing details

Additionally depending on the capabilities of your robot vacuum other channels may be enabled at runtime

TypeChannelDescription
Switchstatus#water_box_statusWater Box Status
Switchstatus#lock_statusLock Status
Numberstatus#water_box_modeWater Box Mode
Numberstatus#mop_modeMop Mode
Switchstatus#water_box_carriage_statusWater Box Carriage Status
Switchstatus#mop_forbidden_enableMop Forbidden
Switchstatus#is_locatingRobot is locating
Numberactions#segmentRoom Clean (enter room #)
Numberactions#current_mapCurrent map, select to load a map. Only when multi-floor maps are enabled in the app
Switchactions#collect_dustStart collecting dust
Switchactions#clean_mop_startStart mop wash
Switchactions#clean_mop_stopStop mop wash
Numberstatus#mop_drying_timeMop drying Time
Switchstatus#is_mop_dryingMop cleaning active
Numberstatus#dock_state_idDock status id
Stringstatus#dock_stateDock status message

Note: cleaning map is only available with cloud access.

There are several advanced channels, which may be useful in rules (e.g. for individual room cleaning etc) In case your vacuum does not support one of these commands, it will show "unsupported_method" for string channels or no value for numeric channels.

Advanced: Vacuum Map Customization ​

In case the default rendering of the vacuum map is not meeting your integration needs, the rendering can be tailored. The way to customize this is to create a file with the name mapConfig.json in the userdata/miio folder. If the binding finds this file it will read the map rendering preferences from there. If the file is available but invalid json, it will create a new file with all the default values for you to customize. This allows you to control the colors, if logo is displayed, if and what text is rendered etc. To (re-)read the file either restart openHAB, restart the binding or alternatively edit the Thing and make (any) minor change. Note, cropping is disabled (hence showing like the maps in OH3.1 and earlier) for any cropBorder value < 0. Note, not all the values need to be in the json file, e.g. a subset of the parameters also works, the parameters not in the mapConfig.json will take the default values.

Basic, Gateway and Lumi Things Channels ​

Mi Air Frying Pan (careli.fryer.maf01) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-cook"="Custom Start Cook","custom-resume-cook"="Custom Resume Cook"]
statusNumberAir Fryer - StatusValue mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
faultNumberAir Fryer - Device FaultValue mapping ["0"="No Faults","1"="E1","2"="E2"]
target_timeNumber:TimeAir Fryer - Target Time
target_temperatureNumber:TemperatureAir Fryer - Target Temperature
left_timeNumber:TimeAir Fryer - Left Time
recipe_idStringCustom - Recipe Id
recipe_nameStringCustom - Recipe Name
work_timeNumber:TimeCustom - Work Time
work_tempNumber:TemperatureCustom - Work Temp
appoint_timeNumber:TimeCustom - Appoint Time
food_quantityNumberCustom - Food QuantityValue mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switchNumberCustom - Preheat SwitchValue mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_leftNumber:TimeCustom - Appoint Time Left
recipe_syncStringCustom - Recipe Sync
turn_potNumberCustom - Turn PotValue mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

Mi Smart Air Fryer (3.5L) (careli.fryer.maf02) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-fryer-start-cook"="Start Cooking","air-fryer-cancel-cooking"="Cancel Cooking","air-fryer-pause"="Pause Cooking","custom-resume-cooking"="Resume Cooking"]
start_cookStringStart Cooking With SettingsStarts cooking with a JSON list of 6 values: recipe id, time (minutes), temperature (degrees Celsius), scheduled start time (minutes, 0 starts now), food quantity (0-4), preheat (1 off, 2 on). The recipe id is M0 for manual cooking, M1 to M8 for the device presets or A plus the recipeID of a cloud recipe. Example manual cooking 15 minutes at 180 degrees: ["M0",15,180,0,0,1].
statusNumberAir Fryer - StatusValue mapping ["0"="Off","1"="Standby","2"="Paused","3"="Scheduled","4"="Cooking","5"="Preheating","6"="Cooking Completed","7"="Preheat Completed","8"="Preheat Paused","9"="Paused (Basket Removed)"]
faultNumberAir Fryer - Device FaultValue mapping ["0"="No Faults","1"="E1","2"="E2"]
target_timeNumber:TimeAir Fryer - Target Time
target_temperatureNumber:TemperatureAir Fryer - Target Temperature
left_timeNumber:TimeAir Fryer - Left Time
recipe_idStringCustom - Recipe Id
work_timeNumber:TimeCustom - Cooking Time
work_tempNumber:TemperatureCustom - Cooking Temperature
appoint_timeNumber:TimeCustom - Scheduled Start Time
food_quantityNumberCustom - Food QuantityValue mapping ["0"="None","1"="Single Layer","2"="Double Layer","3"="Half Pot","4"="Full Pot"]
preheat_switchNumberCustom - Preheat SwitchValue mapping ["0"="Not Set","1"="Off","2"="On"]
appoint_time_leftNumber:TimeCustom - Scheduled Start Time Left
turn_potNumberCustom - Turn Food ReminderValue mapping ["0"="Reminder On","1"="Reminder Off","2"="Turn Food Now"]
recipesStringRecipesList of the Mi Home cloud recipes as JSON, with for each recipe the recipeID, recipeName, time (minutes), temperature (degrees Celsius), preHeat and capacity. Requires the cloud server to be set. The list is read once, send a refresh command to read it again.

Mi Air Frying Pan (careli.fryer.maf03) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-cook"="Custom Start Cook","custom-resume-cook"="Custom Resume Cook"]
statusNumberAir Fryer - StatusValue mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
faultNumberAir Fryer - Device FaultValue mapping ["0"="No Faults","1"="E1","2"="E2"]
target_timeNumber:TimeAir Fryer - Target Time
target_temperatureNumber:TemperatureAir Fryer - Target Temperature
left_timeNumber:TimeAir Fryer - Left Time
recipe_idStringCustom - Recipe Id
recipe_nameStringCustom - Recipe Name
work_timeNumber:TimeCustom - Work Time
work_tempNumber:TemperatureCustom - Work Temp
appoint_timeNumber:TimeCustom - Appoint Time
food_quantityNumberCustom - Food QuantityValue mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switchNumberCustom - Preheat SwitchValue mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_leftNumber:TimeCustom - Appoint Time Left
recipe_syncStringCustom - Recipe Sync
turn_potNumberCustom - Turn PotValue mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

Xiaomi Smart Air Fryer Pro 4L (careli.fryer.maf05a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-fryer-start-cook"="Start Cooking","air-fryer-cancel-cooking"="Cancel Cooking","air-fryer-pause"="Pause Cooking","custom-resume-cook"="Resume Cooking"]
start_cookStringStart Cooking With SettingsStarts cooking with a JSON list of 7 values: recipe id, recipe name, time (minutes), temperature (degrees Celsius), scheduled start time (minutes, 0 starts now), food quantity (0-4), preheat (1 off, 2 on). The recipe id is M0 for manual cooking, M1 to M10 for the device presets or C plus the recipeID of a cloud recipe. The recipe name is sent as given, it is not encoded by the binding. Example manual cooking 15 minutes at 180 degrees: ["M0","u0064u0065u006du006f",15,180,0,0,1].
statusNumberAir Fryer - StatusValue mapping ["0"="Off","1"="Standby","2"="Paused","3"="Scheduled","4"="Cooking","5"="Preheating","6"="Cooking Completed","7"="Preheat Completed","8"="Preheat Paused","9"="Paused (Basket Removed)"]
faultNumberAir Fryer - Device FaultValue mapping ["0"="No Faults","1"="E1","2"="E2"]
target_timeNumber:TimeAir Fryer - Target Time
target_temperatureNumber:TemperatureAir Fryer - Target Temperature
left_timeNumber:TimeAir Fryer - Left Time
recipe_idStringCustom - Recipe Id
recipe_nameStringCustom - Recipe Name
work_timeNumber:TimeCustom - Cooking Time
work_tempNumber:TemperatureCustom - Cooking Temperature
appoint_timeNumber:TimeCustom - Scheduled Start Time
food_quantityNumberCustom - Food QuantityValue mapping ["0"="None","1"="Single Layer","2"="Double Layer","3"="Half Pot","4"="Full Pot"]
preheat_switchNumberCustom - Preheat SwitchValue mapping ["1"="Off","2"="On"]
appoint_time_leftNumber:TimeCustom - Scheduled Start Time Left
recipe_syncStringCustom - Recipe Sync
turn_potNumberCustom - Turn FoodValue mapping ["0"="No Action","2"="Turn Food Now"]
turn_pot_cfgNumberCustom - Turn Food ReminderValue mapping ["0"="Off","1"="On"]
recipesStringRecipesList of the Mi Home cloud recipes as JSON, with for each recipe the recipeID, recipeName, time (minutes), temperature (degrees Celsius), preHeat and capacity. Requires the cloud server to be set. The list is read once, send a refresh command to read it again.

Xiaomi Smart Air Fryer 6.5L (careli.fryer.maf10a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-fryer-start-cook"="Start Cooking","air-fryer-cancel-cooking"="Cancel Cooking","air-fryer-pause"="Pause","air-fryer-resume-cook"="Resume Cooking"]
statusNumberAir Fryer - StatusValue mapping ["0"="Off","1"="Idle","2"="Paused","3"="Scheduled","4"="Cooking","5"="Preheat","6"="Cooking Completed","7"="Preheat Completed","8"="Preheat Paused","9"="Paused To Turn Over Food","10"="Keep Warm","11"="Keep Warm Paused","12"="Keep Warm Completed","13"="Crispy Roast","14"="Degrease"]
faultNumberAir Fryer - Device FaultValue mapping ["0"="No Faults","1"="E1","2"="E2","3"="E3"]
target_timeNumber:TimeAir Fryer - Target Time
target_temperatureNumber:TemperatureAir Fryer - Target Temperature
left_timeNumber:TimeAir Fryer - Left Time
auto_keep_warmSwitchAir Fryer - Auto Keep Warm
current_keep_warmSwitchAir Fryer - Keep Warm
modeNumberAir Fryer - ModeValue mapping ["1"="French Fries","2"="Chicken Wing","3"="Steak","4"="Lamb Chops","5"="Fish","6"="Shrimp","7"="Vegetables","8"="Cake","9"="Pizza","10"="Defrost","11"="Dried Fruit","12"="Yogurt","0"="Manual"]
preheatSwitchAir Fryer - Preheat
recipe_idStringAir Fryer - Recipe Id
recipe_nameStringAir Fryer - Recipe Name
target_cooking_measureNumberAir Fryer - Food QuantityValue mapping ["0"="None","1"="One Layer","2"="Double Layer","3"="Half Pot","4"="Full Pot"]
turn_potNumberAir Fryer - Turn Over FoodValue mapping ["1"="No Need To Turn Over","2"="Turn Over Food"]
turn_pot_configSwitchAir Fryer - Turn Over Reminder
textureNumberAir Fryer - TextureValue mapping ["0"="None","1"="Crispy Roast","2"="Tender Roast","3"="Degrease"]
reservation_left_timeNumber:TimeAir Fryer - Scheduled Start Left Time
cooking_weightNumberAir Fryer - Cooking Weight

Qingping Air Monitor Lite (cgllc.airm.cgd1st) Channels ​

ChannelTypeDescriptionComment
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
pm10_densityNumber:DensityPM10 Density
temperatureNumber:TemperatureTemperature
co2_densityNumber:DimensionlessCO2 Density
tvoc_densityNumberTVOC DensityRead by the Mi Home app, not in the released MIoT spec.
battery_levelNumber:DimensionlessBattery Level
charging_stateNumberCharging StateValue mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
start_timeNumberScreen Off Start TimeMinutes after midnight (480 is 08:00). The screen is switched off between the start and end time; a start time of 0 disables it.
end_timeNumberScreen Off End TimeMinutes after midnight (480 is 08:00). The screen is switched off between the start and end time; a start time of 0 disables it.
monitoring_frequencyNumberPM2.5 and PM10 Detection FrequencyValue mapping ["1"="Every second","60"="Every minute","300"="Every 5 minutes","600"="Every 10 minutes"]
screen_offNumberScreen Off AfterValue mapping ["0"="Never","15"="15 seconds","30"="30 seconds","60"="1 minute","300"="5 minutes","600"="10 minutes"]
tempature_unitStringTemperature UnitValue mapping ["c"="Celsius","f"="Fahrenheit"]
screensaver_startNumberScreen Saver StartValue mapping ["60"="After 1 minute","120"="After 2 minutes","300"="After 5 minutes","600"="After 10 minutes"]
screensaver_styleNumberScreen Saver StyleValue mapping ["1"="Current reading","0"="All readings, rotating","3"="Clock with current reading","2"="Clock with rotating readings"]
auto_power_offNumberAuto Power Off (on Battery)Value mapping ["0"="Never","300"="After 5 minutes","600"="After 10 minutes","1800"="After 30 minutes","3600"="After 1 hour"]
time_formatNumberScreen Time FormatValue mapping ["1"="12-hour","0"="24-hour"]
grading_standardNumberGrading StandardValue mapping ["0"="China","1"="US"]
actionsStringActionsCO2 calibration takes 90 seconds; place the device next to an open window. Value mapping ["calibrate-co2"="Calibrate CO2 Sensor"]

Qingping Air Monitor Lite (cgllc.airm.cgdn1) Channels ​

ChannelTypeDescriptionComment
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
pm10_densityNumber:DensityPM10 Density
temperatureNumber:TemperatureTemperature
co2_densityNumber:DimensionlessCO2 Density
battery_levelNumber:DimensionlessBattery Level
charging_stateNumberCharging StateValue mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
voltageNumber:ElectricPotentialBattery VoltageNot shown in the Mi Home app; the spec gives no unit, millivolt is assumed.
macStringMAC Address
start_timeNumberScreen Off Start TimeMinutes after midnight (480 is 08:00). The screen is switched off between the start and end time; a start time of 0 disables it.
end_timeNumberScreen Off End TimeMinutes after midnight (480 is 08:00). The screen is switched off between the start and end time; a start time of 0 disables it.
monitoring_frequencyNumberPM2.5 and PM10 Detection FrequencyValue mapping ["1"="Every second","60"="Every minute","300"="Every 5 minutes","600"="Every 10 minutes"]
screen_offNumberScreen Off AfterValue mapping ["15"="15 seconds","30"="30 seconds","60"="1 minute","300"="5 minutes"]
device_offNumberPower Off After (on Battery, Old Setting)Used by older versions of the app; the current app sets Auto Power Off (auto_power_off). Value mapping ["15"="15 minutes","30"="30 minutes","60"="60 minutes","0"="Never"]
tempature_unitStringTemperature UnitValue mapping ["c"="Celsius","f"="Fahrenheit"]
screensaver_startNumberScreen Saver StartScreen saver; needs a firmware with screen saver support (the app hides it for older firmware). Value mapping ["60"="After 1 minute","120"="After 2 minutes","300"="After 5 minutes","600"="After 10 minutes"]
screensaver_styleNumberScreen Saver StyleScreen saver; needs a firmware with screen saver support (the app hides it for older firmware). Value mapping ["1"="Current reading","0"="All readings, rotating","3"="Clock with current reading","2"="Clock with rotating readings"]
auto_power_offNumberAuto Power Off (on Battery)Value mapping ["0"="Never","300"="After 5 minutes","600"="After 10 minutes","1800"="After 30 minutes","3600"="After 1 hour"]
actionsStringActionsCO2 calibration takes 90 seconds; place the device next to an open window. Value mapping ["calibrate-co2"="Calibrate CO2 Sensor"]

Qingping Air Monitor 2 (cgllc.airm.cgs2) Channels ​

ChannelTypeDescriptionComment
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
pm10_densityNumber:DensityPM10 Density
temperatureNumber:TemperatureTemperature
co2_densityNumber:DimensionlessCO2 Density
tvoc_densityNumberTVOC DensityThe unit is given by the TVOC Unit channel.
battery_levelNumber:DimensionlessBattery Level
charging_stateNumberCharging StateValue mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
noise_decibelNumberNoise Level
temperature_unitNumberTemperature UnitValue mapping ["12289"="Celsius","12290"="Fahrenheit"]
tvoc_unitNumberTVOC UnitValue mapping ["12296"="VOC index","12293"="ppb","12292"="mg/m3"]
time_modeSwitch24-Hour ClockON when the screen clock uses the 24-hour format.
standardNumberAir Quality Grading StandardValue mapping ["16384"="China","16385"="US"]
sensor_statesStringSensor StatesJSON text with the state of each sensor, for example InitializingState, DisableState, NotInstallState or AbnormalState.

Mi Multifunction Air Monitor (cgllc.airmonitor.b1) Channels ​

ChannelTypeDescriptionComment
batteryNumberBattery
pm25Number:DensityPM2.5
co2Number:DimensionlessCO2e
tvocNumbertVOCThe unit (ppb or mg/m3) is set in the Mi Home app.
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature

Qingping Air Monitor (cgllc.airmonitor.s1) Channels ​

ChannelTypeDescriptionComment
batteryNumberBatteryThe device with firmware "4.1.8_9999" stops recognizing parameter "battery" in "get_value" command. The "battery" value request was extracted to separate command in order to keep backward compatibility to the devices with older firmware.
pm25Number:DensityPM2.5
co2Number:DimensionlessCO2
tvocNumbertVOCThe unit (ppb or mg/m3) is set in the Mi Home app.
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
aqiNumberAir Quality Index
tvoc_unitStringtVOC UnitValue mapping ["ppb"="ppb","mg_m3"="mg/m3"]
temperature_unitStringTemperature UnitValue mapping ["c"="Celsius","f"="Fahrenheit"]

Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) (chuangmi.plug.212a01) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
temperatureNumber:TemperatureTemperature
working_timeNumber:TimeWorking Time
ledSwitchIndicator Light
power_consumptionNumber:EnergyEnergy Consumption
electric_currentNumber:ElectricCurrentCurrent
voltageNumber:ElectricPotentialVoltage
electric_powerNumber:PowerActive Power
on_durationNumber:TimeLoop On Duration
off_durationNumber:TimeLoop Off Duration
countdownNumber:TimeCountdown
loop_taskSwitchLoop TaskWhen on, the plug switches itself on and off by the set durations. Set Loop On Duration and Loop Off Duration first.
countdown_activeSwitchCountdown Active
max_power_limitSwitchMax Power LimitWhen on, the plug switches itself off when the power is greater than Max Power. Firmware 2.1.8_0028 or newer.
max_powerNumber:PowerMax PowerFirmware 2.1.8_0036 or newer.
bt-gwStringBT GatewayValue mapping ["disable"="Disable","enable"="Enable"]
bt-gw-devicesStringConnected BT Gateway DevicesNote, refreshes every 2nd refresh. Channel requires cloud connectivity to function. Sample widget to visualise the (json) output available from the widget market

Mi Smart Plug WiFi (chuangmi.plug.hmi205) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light

Mi Smart Plug (WiFi) (chuangmi.plug.hmi206) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light

Mi Smart Wi-Fi Plug (Bluetooth Gateway) (chuangmi.plug.hmi208) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
usbSwitchUSB
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light

Mi Plug Mini (chuangmi.plug.m1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light

Mi Smart Plug (Wi-Fi) Basic (chuangmi.plug.m3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light

Mi Smart Power Plug (chuangmi.plug.v1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
usbSwitchUSB
temperatureNumber:TemperatureTemperature

Mi Smart Power Plug v2 (chuangmi.plug.v2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
usbSwitchUSB

MIJIA Smart Plug Enhanced (chuangmi.plug.v3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPowerIf this channel does not respond to on/off upgrade firmware
usbSwitchUSB
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light
electric_powerNumber:PowerActive Power

Mijia Rice cooker (chunmi.cooker.eh1) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["1"="Idle","2"="Cooking","3"="Keep Warm","4"="Scheduled","5"="Setting (Code 5)","6"="Setting (Code 6)","7"="Setting (Code 7)","8"="Error","9"="Finished"]
errorNumberErrorValue mapping ["0"="None","9"="Top Sensor Damaged","10"="Base Sensor Damaged","11"="Communication Fault"]
temperatureNumber:TemperatureTemperature
remaining_timeNumber:TimeRemaining Time
cook_timeNumber:TimeCooking Time
controlStringControlValue mapping ["cancel"="Cancel Cooking"]

Xiaomi Smart Blender (chunmi.juicer.twa1) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["1"="Idle","2"="Working","3"="Paused","4"="Scheduled","5"="Shut Down","6"="Keeping Warm","7"="Finished","8"="Keep Warm Finished","11"="Fault"]
errorNumberErrorValue mapping ["0"="No Error","1"="Motor Overload","2"="No Cup","3"="High Voltage","4"="Low Voltage","5"="High Temperature","10"="Temperature Sensor Failure","11"="Communication Failure"]
remaining_timeNumber:TimeRemaining Time
schedule_timeNumber:TimeScheduled Time
keep_warm_remaining_timeNumber:TimeKeep Warm Remaining Time
cooking_timeNumber:TimeCooking Time
temperatureNumber:TemperatureTemperature
cupNumberCupValue mapping ["0"="No Cup","1"="OK"]
lid_openSwitchLid Open
controlStringControlValue mapping ["pause"="Pause","resume"="Resume","cancel"="Cancel"]

Xiaomi Smart Blender (chunmi.juicer.uka1) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["1"="Idle","2"="Working","3"="Paused","4"="Scheduled","5"="Shut Down","6"="Keeping Warm","7"="Finished","8"="Keep Warm Finished","11"="Fault"]
errorNumberErrorValue mapping ["0"="No Error","1"="Motor Overload","2"="No Cup","3"="High Voltage","4"="Low Voltage","5"="High Temperature","10"="Temperature Sensor Failure","11"="Communication Failure"]
remaining_timeNumber:TimeRemaining Time
schedule_timeNumber:TimeScheduled Time
keep_warm_remaining_timeNumber:TimeKeep Warm Remaining Time
cooking_timeNumber:TimeCooking Time
temperatureNumber:TemperatureTemperature
cupNumberCupValue mapping ["0"="No Cup","1"="OK"]
lid_openSwitchLid Open
controlStringControlValue mapping ["pause"="Pause","resume"="Resume","cancel"="Cancel"]

Gosund Smart Plug (cuco.plug.cp1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
ledSwitchIndicator Light
physical_controls_lockedSwitchChild Lock
default_power_on_stateNumberPower-On StateValue mapping ["0"="On","1"="Off","2"="Memory"]
electric_powerNumber:PowerActive Power
voltageNumber:ElectricPotentialVoltage
electric_currentNumber:ElectricCurrentCurrent

Gosund Smart Plug CP1 (cuco.plug.cp1d) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["switch-toggle"="Toggle"]
powerSwitchPower
ledSwitchIndicator Light

Xiaomi Smart Plug 2 (Wi-Fi) (cuco.plug.v2eur) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["switch-toggle"="Toggle"]
powerSwitchPower
default_power_on_stateNumberPower-On StateValue mapping ["0"="Memory","1"="On","2"="Off"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Over Temperature","2"="Overload"]
physical_controls_lockedSwitchChild Lock
power_consumptionNumber:EnergyEnergy Consumption
electric_powerNumber:PowerActive Power
ledSwitchIndicator Light
delaySwitchDouble-Press Countdown
delay_timeNumber:TimeCountdown Time
delay_remain_timeNumber:TimeCountdown Remaining Time
charging_protectionSwitchCharging ProtectionWhen on, the plug switches itself off when the power stays below Charging Protection Threshold for Charging Protection Duration.
charging_protection_powerNumber:PowerCharging Protection Threshold
charging_protection_timeNumber:TimeCharging Protection Duration
loop_taskSwitchLoop TaskWhen on, the plug runs the loop task set in the Mi Home app (switches itself on and off).
max_power_limitSwitchMax Power LimitWhen on, the plug switches itself off when the power is greater than Max Power.
max_powerNumber:PowerMax Power

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Low","2"="Medium","3"="High","4"="Constant Humidity"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light
buzzerSwitchNotification Sound
water_statusNumberWaterValue mapping ["0"="No Water","1"="Normal"]
water_tankNumberWater TankValue mapping ["0"="Removed","1"="Installed"]

Mi Smart Humidifier S (deerma.humidifier.jsq1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Low","2"="Medium","3"="High","4"="Constant Humidity"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light
buzzerSwitchNotification Sound
water_statusNumberWaterValue mapping ["0"="No Water","1"="Normal"]
water_tankNumberWater TankValue mapping ["0"="Removed","1"="Installed"]
overwet_protectionSwitchOver-Humidity ProtectionChanges to low when the humidity stays above 70% for 1 hour

Mijia Smart Anti-bacterial Humidifier 2 (deerma.humidifier.jsq2g) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Tank Removed"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Constant Humidity"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_removedSwitchWater Tank Removed
water_shortageSwitchInsufficient Water
humidity_sensor_faultSwitchHumidity Sensor Fault
temperature_sensor_faultSwitchTemperature Sensor Fault
overwet_protection_activeSwitchOver-Humidity Protection Active
overwet_protectionSwitchOver-Humidity ProtectionSwitches to level 1 at 85% humidity and turns off after 30 minutes at or above 85%
constant_protection_activeSwitchAuto Turn-Off Active
constant_protectionSwitchAuto Turn-OffTurns off when the target humidity is reached

Xiaomi Smart Humidifier 2 (deerma.humidifier.jsq2w) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Tank Removed"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Constant Humidity"]
target_humidityNumber:DimensionlessTarget Humidity
statusNumberStatusValue mapping ["1"="Idle","2"="Busy"]
modeNumberModeValue mapping ["0"="None","1"="Constant Humidity"]
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_removedSwitchWater Tank Removed
water_shortageSwitchInsufficient Water
humidity_sensor_faultSwitchHumidity Sensor Fault
temperature_sensor_faultSwitchTemperature Sensor Fault
overwet_protection_activeSwitchOver-Humidity Protection Active
overwet_protectionSwitchOver-Humidity Protection
high_humiditySwitchHigh Humidity

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq5) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Tank Removed"]
fan_levelNumberFan LevelValue mapping ["1"="Low","2"="Medium","3"="High","4"="Constant Humidity"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_shortageSwitchInsufficient Water
water_tank_removedSwitchWater Tank Removed

Mi Smart Humidifer S (deerma.humidifier.jsqs) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Tank Removed"]
fan_levelNumberFan LevelValue mapping ["1"="Low","2"="Medium","3"="High","4"="Constant Humidity"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_shortageSwitchInsufficient Water
water_tank_removedSwitchWater Tank Removed
overwet_protectionSwitchOver-Humidity ProtectionChanges to low when the humidity stays above 70% for 1 hour
humidity_sensor_sourceNumberHumidity Sensor SourceValue mapping ["0"="This Device","1"="Other Device"]
filter_life_levelNumber:DimensionlessFilter Life
filter_left_timeNumber:TimeFilter Time Left
filter_used_timeNumber:TimeFilter Used Time

Mi Smart Humidifier (deerma.humidifier.mjjsq) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Low","2"="Medium","3"="High","4"="Constant Humidity"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light
buzzerSwitchNotification Sound
water_statusNumberWaterValue mapping ["0"="No Water","1"="Normal"]
water_tankNumberWater TankValue mapping ["0"="Removed","1"="Installed"]

Mi Fresh Air Ventilator A1-150 (dmaker.airfresh.a1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","sleep"="Sleep","favourite"="Favorite"]
heaterSwitchHeater
ptc_statusSwitchPTC Status
displaySwitchDisplay
child_lockSwitchChild Lock
alarmSwitchNotification Sound
pm25Number:DensityPM2.5
co2Number:DimensionlessCO2
control_speedNumberCurrent Speed
favourite_speedNumberFavorite Speed
temperature_outsideNumber:TemperatureTemperature Outside
filter_percentsNumber:DimensionlessFilter Remaining
filter_daysNumber:TimeFilter Days Remaining
reset_filterStringReset FilterValue mapping ["reset"="Reset Filter"]

Mi Fresh Air Ventilator (dmaker.airfresh.t2017) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","sleep"="Sleep","favourite"="Favorite"]
heaterSwitchHeater
ptc_levelStringPTC LevelValue mapping ["low"="Low","medium"="Medium","high"="High"]
ptc_statusSwitchPTC Status
screen_directionStringScreen DirectionValue mapping ["forward"="Normal","left"="Left","right"="Right"]
displaySwitchDisplay
child_lockSwitchChild Lock
alarmSwitchNotification Sound
pm25Number:DensityPM2.5
co2Number:DimensionlessCO2
control_speedNumberCurrent Speed
favourite_speedNumberFavorite Speed
temperature_outsideNumber:TemperatureTemperature Outside
filter_percentsNumber:DimensionlessFilter Remaining
filter_daysNumber:TimeFilter Days Remaining
filter_pro_percentsNumber:DimensionlessFilter Pro Remaining
filter_pro_daysNumber:TimeFilter Pro Days Remaining
reset_filterStringReset FilterValue mapping ["intermediate"="Filter","efficient"="Filter Pro"]

Mi Smart Standing Fan 2 Lite (dmaker.fan.1c) Channels ​

ChannelTypeDescriptionComment
OnSwitchPower
FanLevelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
ModeNumberModeValue mapping ["0"="Standard","1"="Sleep"]
HorizontalSwingSwitchOscillation
OffDelayTimeNumber:TimePower-Off Timer
AlarmSwitchNotification Sound
BrightnessSwitchIndicator Light
PhysicalControlsLockedSwitchChild Lock

Mi Smart Standing Fan 1X (dmaker.fan.p5) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedDimmerFan Speed
modeStringModeValue mapping ["normal"="Standard","nature"="Natural"]
rollSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
moveStringMove DirectionWrite only. Turns the fan head a step
timerNumber:TimePower-Off Timer
beepSwitchNotification Sound
lightSwitchIndicator Light
child_lockSwitchChild Lock

Mi Smart Standing Fan 1C (dmaker.fan.p8) Channels ​

ChannelTypeDescriptionComment
OnSwitchPower
FanLevelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
ModeNumberModeValue mapping ["0"="Standard","1"="Sleep"]
HorizontalSwingSwitchOscillation
OffDelayTimeNumber:TimePower-Off Timer
AlarmSwitchNotification Sound
BrightnessSwitchIndicator Light
PhysicalControlsLockedSwitchChild Lock

Mi Smart Tower Fan (dmaker.fan.p9) Channels ​

ChannelTypeDescriptionComment
OnSwitchPower
SpeedLevelDimmerFan Speed
FanLevelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
ModeNumberModeValue mapping ["0"="Standard","1"="Natural","2"="Sleep"]
HorizontalSwingSwitchOscillation
HorizontalAngleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
MotorControlStringMove DirectionWrite only. Turns the fan head a step; sends 2 for left and 1 for right, as the Mi Home app does
OffDelayTimeNumber:TimePower-Off Timer
AlarmSwitchNotification Sound
BrightnessSwitchIndicator Light
PhysicalControlsLockedSwitchChild Lock

Mi Smart Standing Fan 2 (dmaker.fan.p10) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
motor_controlStringMove DirectionWrite only. Turns the fan head a step
off_delay_timeNumber:TimePower-Off Timer
alarmSwitchNotification Sound
brightnessSwitchIndicator Light
physical_controls_lockedSwitchChild Lock

Mi Smart Standing Fan Pro (dmaker.fan.p11) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
statusDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delay_timeNumber:TimePower-Off Timer
alarmSwitchNotification Sound
on1SwitchIndicator Light
physical_controls_lockedSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults"]

Mi Smart Standing Fan Pro (dmaker.fan.p15) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
statusDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delay_timeNumber:TimePower-Off Timer
alarmSwitchNotification Sound
on1SwitchIndicator Light
physical_controls_lockedSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults"]

Mi Smart Standing Fan 2 (dmaker.fan.p18) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
motor_controlStringMove DirectionWrite only. Turns the fan head a step
off_delay_timeNumber:TimePower-Off Timer
alarmSwitchNotification Sound
brightnessSwitchIndicator Light
physical_controls_lockedSwitchChild Lock

Mijia Smart Standing Air Circulation Fan (dmaker.fan.p28) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural","2"="Smart","3"="Sleep"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
moveStringMove DirectionWrite only. Turns the fan head a step
vertical_swingSwitchVertical Oscillation
vertical_angleNumber:AngleVertical Oscillation AngleValue mapping ["30"="30","60"="60","90"="90"]
move_verticalStringMove Direction VerticalWrite only. Turns the fan head a step
swing_allSwitchLoop Oscillation
back_to_centerSwitchBack to CenterWrite only. ON turns the fan head back to the center
off_to_centerSwitchBack to Center at Power-Off
off_delay_timeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
temperatureNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity

Xiaomi Smart Standing Fan 2 Pro (dmaker.fan.p33) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
statusDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delay_timeNumber:TimePower-Off Timer
alarmSwitchNotification Sound
on1SwitchIndicator Light
physical_controls_lockedSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults"]

Xiaomi Smart Tower Fan (dmaker.fan.p39) Channels ​

ChannelTypeDescriptionComment
OnSwitchPower
SpeedLevelDimmerFan Speed
FanLevelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
ModeNumberModeValue mapping ["0"="Standard","1"="Natural","2"="Sleep"]
HorizontalSwingSwitchOscillation
HorizontalAngleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
MotorControlStringMove DirectionWrite only. Turns the fan head a step; sends 2 for left and 1 for right, as the Mi Home app does
OffDelayTimeNumber:TimePower-Off Timer
AlarmSwitchNotification Sound
BrightnessSwitchIndicator Light
PhysicalControlsLockedSwitchChild Lock

Mijia Smart Tower Fan 2 (dmaker.fan.p45) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan SpeedUsed in standard mode
fan_levelNumberFan LevelIn natural mode the Mi Home app uses it to select one of the four natural wind presets
modeNumberModeValue mapping ["0"="Standard","1"="Natural","2"="Sleep"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delay_timeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock

Mi Robot Vacuum-Mop (dreame.vacuum.ma1808) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringVacuum ActionValue mapping ["sweep"="Start Cleaning","stopsweep"="Pause Cleaning","stop"="Stop Cleaning","dock"="Return To Dock","find"="Find Robot","play-sound"="Play Test Sound","reset-main-brush"="Reset Main Brush Life","reset-filter"="Reset Filter Life","reset-side-brush"="Reset Side Brush Life"]
BatteryLevelNumber:DimensionlessBattery - Battery Level
ChargingStateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","4"="Charging Completed","5"="Go Charging"]
water-modeNumberClean - Mop Water LevelThe Mi Home app offers it from robot firmware 1097 (mc1808), 1605 (ma1808) and 1806 (mb1808)
FaultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
StatusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
BrushLeftTimeNumber:TimeMain Cleaning Brush - Brush Left Time
BrushLifeLevelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
FilterLifeLevelNumber:DimensionlessFilter - Filter Life Level
FilterLeftTimeNumber:TimeFilter - Filter Left Time
BrushLeftTime1Number:TimeSide Cleaning Brush - Brush Left Time
BrushLifeLevel1Number:DimensionlessSide Cleaning Brush - Brush Life Level
WorkModeNumberClean - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean"]
AreaStringClean - AreaNot used by the Mi Home app
TimerStringClean - TimerScheduled cleaning timers. Read-only: creating a timer needs the ids that the Mi Home app supplies
ModeNumberClean - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
TotalCleanTimeNumber:TimeClean - Total Clean Time
TotalCleanTimesNumberClean - Total Clean Times
TotalCleanAreaNumber:AreaClean - Total Clean Area
CleanLogStartTimeNumberClean - First Clean TimeUnix timestamp in seconds
ButtonLedNumberClean - Button LedNot used by the Mi Home app
TaskDoneNumberClean - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning"]
SaveMapStatusSwitchClean - Map SavingRead-only: switching it off clears the saved map and its settings
LifeSieveStringConsumable - Life SieveNot used by the Mi Home app
LifeBrushSideStringConsumable - Life Brush SideNot used by the Mi Home app
LifeBrushMainStringConsumable - Life Brush MainNot used by the Mi Home app
EnableSwitchDo Not Disturb - Enable
StartTimeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
StopTimeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
VolumeNumber:DimensionlessAudio - Volume
VoicePacketsStringAudio - Voice Packet Id
TimeZoneStringTime - Time Zone

Mi Robot Vacuum-Mop (dreame.vacuum.mb1808) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringVacuum ActionValue mapping ["sweep"="Start Cleaning","stopsweep"="Pause Cleaning","stop"="Stop Cleaning","dock"="Return To Dock","find"="Find Robot","play-sound"="Play Test Sound","reset-main-brush"="Reset Main Brush Life","reset-filter"="Reset Filter Life","reset-side-brush"="Reset Side Brush Life"]
BatteryLevelNumber:DimensionlessBattery - Battery Level
ChargingStateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","4"="Charging Completed","5"="Go Charging"]
water-modeNumberClean - Mop Water LevelThe Mi Home app offers it from robot firmware 1097 (mc1808), 1605 (ma1808) and 1806 (mb1808)
FaultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
StatusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
BrushLeftTimeNumber:TimeMain Cleaning Brush - Brush Left Time
BrushLifeLevelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
FilterLifeLevelNumber:DimensionlessFilter - Filter Life Level
FilterLeftTimeNumber:TimeFilter - Filter Left Time
BrushLeftTime1Number:TimeSide Cleaning Brush - Brush Left Time
BrushLifeLevel1Number:DimensionlessSide Cleaning Brush - Brush Life Level
WorkModeNumberClean - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean"]
AreaStringClean - AreaNot used by the Mi Home app
TimerStringClean - TimerScheduled cleaning timers. Read-only: creating a timer needs the ids that the Mi Home app supplies
ModeNumberClean - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
TotalCleanTimeNumber:TimeClean - Total Clean Time
TotalCleanTimesNumberClean - Total Clean Times
TotalCleanAreaNumber:AreaClean - Total Clean Area
CleanLogStartTimeNumberClean - First Clean TimeUnix timestamp in seconds
ButtonLedNumberClean - Button LedNot used by the Mi Home app
TaskDoneNumberClean - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning"]
SaveMapStatusSwitchClean - Map SavingRead-only: switching it off clears the saved map and its settings
LifeSieveStringConsumable - Life SieveNot used by the Mi Home app
LifeBrushSideStringConsumable - Life Brush SideNot used by the Mi Home app
LifeBrushMainStringConsumable - Life Brush MainNot used by the Mi Home app
EnableSwitchDo Not Disturb - Enable
StartTimeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
StopTimeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
VolumeNumber:DimensionlessAudio - Volume
VoicePacketsStringAudio - Voice Packet Id
TimeZoneStringTime - Time Zone

Mi Robot Vacuum Mop 1C STYTJ01ZHM (dreame.vacuum.mc1808) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringVacuum ActionValue mapping ["sweep"="Start Cleaning","stopsweep"="Pause Cleaning","stop"="Stop Cleaning","dock"="Return To Dock","find"="Find Robot","play-sound"="Play Test Sound","reset-main-brush"="Reset Main Brush Life","reset-filter"="Reset Filter Life","reset-side-brush"="Reset Side Brush Life"]
BatteryLevelNumber:DimensionlessBattery - Battery Level
ChargingStateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","4"="Charging Completed","5"="Go Charging"]
water-modeNumberClean - Mop Water LevelThe Mi Home app offers it from robot firmware 1097 (mc1808), 1605 (ma1808) and 1806 (mb1808)
FaultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
StatusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
BrushLeftTimeNumber:TimeMain Cleaning Brush - Brush Left Time
BrushLifeLevelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
FilterLifeLevelNumber:DimensionlessFilter - Filter Life Level
FilterLeftTimeNumber:TimeFilter - Filter Left Time
BrushLeftTime1Number:TimeSide Cleaning Brush - Brush Left Time
BrushLifeLevel1Number:DimensionlessSide Cleaning Brush - Brush Life Level
WorkModeNumberClean - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean"]
AreaStringClean - AreaNot used by the Mi Home app
TimerStringClean - TimerScheduled cleaning timers. Read-only: creating a timer needs the ids that the Mi Home app supplies
ModeNumberClean - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
TotalCleanTimeNumber:TimeClean - Total Clean Time
TotalCleanTimesNumberClean - Total Clean Times
TotalCleanAreaNumber:AreaClean - Total Clean Area
CleanLogStartTimeNumberClean - First Clean TimeUnix timestamp in seconds
ButtonLedNumberClean - Button LedNot used by the Mi Home app
TaskDoneNumberClean - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning"]
SaveMapStatusSwitchClean - Map SavingRead-only: switching it off clears the saved map and its settings
LifeSieveStringConsumable - Life SieveNot used by the Mi Home app
LifeBrushSideStringConsumable - Life Brush SideNot used by the Mi Home app
LifeBrushMainStringConsumable - Life Brush MainNot used by the Mi Home app
EnableSwitchDo Not Disturb - Enable
StartTimeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
StopTimeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
VolumeNumber:DimensionlessAudio - Volume
VoicePacketsStringAudio - Voice Packet Id
TimeZoneStringTime - Time Zone

Xiaomi Robot Vacuum-Mop 2C (dreame.vacuum.md1808) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringVacuum ActionValue mapping ["sweep"="Start Cleaning","stopsweep"="Pause Cleaning","stop"="Stop Cleaning","dock"="Return To Dock","find"="Find Robot","play-sound"="Play Test Sound","reset-main-brush"="Reset Main Brush Life","reset-filter"="Reset Filter Life","reset-side-brush"="Reset Side Brush Life"]
BatteryLevelNumber:DimensionlessBattery - Battery Level
ChargingStateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","4"="Charging Completed","5"="Go Charging"]
water-modeNumberClean - Mop Water LevelThe Mi Home app offers it from robot firmware 1097 (mc1808), 1605 (ma1808) and 1806 (mb1808)
FaultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
StatusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
BrushLeftTimeNumber:TimeMain Cleaning Brush - Brush Left Time
BrushLifeLevelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
FilterLifeLevelNumber:DimensionlessFilter - Filter Life Level
FilterLeftTimeNumber:TimeFilter - Filter Left Time
BrushLeftTime1Number:TimeSide Cleaning Brush - Brush Left Time
BrushLifeLevel1Number:DimensionlessSide Cleaning Brush - Brush Life Level
WorkModeNumberClean - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean"]
AreaStringClean - AreaNot used by the Mi Home app
TimerStringClean - TimerScheduled cleaning timers. Read-only: creating a timer needs the ids that the Mi Home app supplies
ModeNumberClean - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
TotalCleanTimeNumber:TimeClean - Total Clean Time
TotalCleanTimesNumberClean - Total Clean Times
TotalCleanAreaNumber:AreaClean - Total Clean Area
CleanLogStartTimeNumberClean - First Clean TimeUnix timestamp in seconds
ButtonLedNumberClean - Button LedNot used by the Mi Home app
TaskDoneNumberClean - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning"]
SaveMapStatusSwitchClean - Map SavingRead-only: switching it off clears the saved map and its settings
LifeSieveStringConsumable - Life SieveNot used by the Mi Home app
LifeBrushSideStringConsumable - Life Brush SideNot used by the Mi Home app
LifeBrushMainStringConsumable - Life Brush MainNot used by the Mi Home app
EnableSwitchDo Not Disturb - Enable
StartTimeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
StopTimeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
VolumeNumber:DimensionlessAudio - Volume
VoicePacketsStringAudio - Voice Packet Id
TimeZoneStringTime - Time Zone

Dreame Robot Vacuum-Mop F9 (dreame.vacuum.p2008) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultThe Mi Home app uses it with robot firmware older than 1039, newer firmware reports the faults in faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery-levelNumber:DimensionlessBattery - Battery Level
charging-stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush-left-timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush-life-levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush-left-time1Number:TimeSide Cleaning Brush - Brush Left Time
brush-life-level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter-life-levelNumber:DimensionlessFilter - Filter Life Level
filter-left-timeNumber:TimeFilter - Filter Left Time
work-modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean"]
cleaning-timeNumber:TimeVacuum Extend - Cleaning Time
cleaning-areaNumber:AreaVacuum Extend - Cleaning Area
cleaning-modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop-modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox-statusSwitchVacuum Extend - Water Tank Installed
task-statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning"]
break-point-restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet-pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it from robot firmware 1039
serial-numberStringVacuum Extend - Serial Number
keep-sweeper-timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start-timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end-timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice-packet-idStringAudio - Voice Packet Id
time-zoneStringTime - Time Zone
timer-cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first-clean-timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total-clean-timeNumber:TimeClean Logs - Total Clean Time
total-clean-timesNumberClean Logs - Total Clean Times
total-clean-areaNumber:AreaClean Logs - Total Clean Area
save-map-statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Dreame Robot Vacuum D9 (dreame.vacuum.p2009) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringVacuum ActionValue mapping ["sweep"="Start Cleaning","stopsweep"="Pause Cleaning","stop"="Stop Cleaning","dock"="Return To Dock","findme"="Find Robot","testsound"="Play Test Sound"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultShown by the Mi Home app of the p2036; the app of the p2009 shows the codes of faults
battery-levelNumber:DimensionlessBattery - Battery Level
charging-stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumableStringReset ConsumableValue mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush Life","sidebrush-cleaner-reset-brush-life"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life"]
brush-left-timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush-life-levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush-left-time1Number:TimeSide Cleaning Brush - Brush Left Time
brush-life-level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter-life-levelNumber:DimensionlessFilter - Filter Life Level
filter-left-timeNumber:TimeFilter - Filter Left Time
work-modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning-timeNumber:TimeVacuum Extend - Cleaning Time
cleaning-areaNumber:AreaVacuum Extend - Cleaning Area
cleaning-modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop-modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox-statusSwitchVacuum Extend - Water Tank Installed
task-statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break-point-restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet-pressSwitchVacuum Extend - Carpet Boost
serial-number1StringVacuum Extend - Serial Number
clean-rags-tipNumber:TimeVacuum Extend - Mop Pad Cleaning ReminderMinutes of mopping after which the robot reminds to clean the mop pad, 0 switches the reminder off. Offered by the Mi Home app of the p2036 with 15, 30 and 45 minutes
keep-sweeper-timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation-matchedStringVacuum Extend - Nation Matched
relocation-statusNumberVacuum Extend - Relocation Status
laser-switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of these models
clean-settingNumberVacuum Extend - Cleaning TypeSweeping only works without the water tank. Not offered by the Mi Home app of the p2036
sensitivityNumberVacuum Extend - Carpet Boost SensitivityNot shown by the Mi Home app of these models
mop-wayNumberVacuum Extend - Mopping PatternDeep mopping mops in a dense Z-shaped pattern. Not offered by the Mi Home app of the p2036
enableSwitchDo Not Disturb - Enable
start-timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end-timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult-map-stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice-packet-idStringAudio - Voice Packet Id
time-zoneStringTime - Time Zone
timer-cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first-clean-timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total-clean-timeNumber:TimeClean Logs - Total Clean Time
total-clean-timesNumberClean Logs - Total Clean Times
total-clean-areaNumber:AreaClean Logs - Total Clean Area
sensor-life-levelNumber:DimensionlessSensor - Sensor Life Level
sensor-left-timeNumber:TimeSensor - Sensor Left Time

Dreame Bot W10 (dreame.vacuum.p2027) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bit 0 (0 vacuuming and mopping, 1 mopping only), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, the app offers 5, 10 and 15) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused"]
child_lockSwitchVacuum Extend - Child LockNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionOffered by the Mi Home app from firmware 1045. The app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

Dreame Bot Z10 Pro (dreame.vacuum.p2028) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle Avoidance
clean_settingNumberVacuum Extend - Cleaning TypeSweeping only works without the water tank
sensitivityNumberVacuum Extend - Carpet Boost SensitivityCarpet recognition sensitivity, offered by the Mi Home app while carpet_press is on
mop_wayNumberVacuum Extend - Mopping PatternDeep mopping mops in a dense Z-shaped pattern
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time

DreameBot L10 Plus (dreame.vacuum.p2028a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle Avoidance
clean_settingNumberVacuum Extend - Cleaning TypeSweeping only works without the water tank
sensitivityNumberVacuum Extend - Carpet Boost SensitivityCarpet recognition sensitivity, offered by the Mi Home app while carpet_press is on
mop_wayNumberVacuum Extend - Mopping PatternDeep mopping mops in a dense Z-shaped pattern
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time

Dreame Bot L10 Pro (dreame.vacuum.p2029) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
laser_switchSwitchVacuum Extend - 3D Obstacle Avoidance
clean_settingNumberVacuum Extend - Cleaning TypeSweeping only works without the water tank
sensitivityNumberVacuum Extend - Carpet Boost SensitivityCarpet recognition sensitivity, offered by the Mi Home app while carpet_press is on
mop_wayNumberVacuum Extend - Mopping PatternDeep mopping mops in a dense Z-shaped pattern
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time

Trouver Robot LDS Vacuum-Mop Finder (dreame.vacuum.p2036) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringVacuum ActionValue mapping ["sweep"="Start Cleaning","stopsweep"="Pause Cleaning","stop"="Stop Cleaning","dock"="Return To Dock","findme"="Find Robot","testsound"="Play Test Sound"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultShown by the Mi Home app of the p2036; the app of the p2009 shows the codes of faults
battery-levelNumber:DimensionlessBattery - Battery Level
charging-stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumableStringReset ConsumableValue mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush Life","sidebrush-cleaner-reset-brush-life"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life"]
brush-left-timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush-life-levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush-left-time1Number:TimeSide Cleaning Brush - Brush Left Time
brush-life-level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter-life-levelNumber:DimensionlessFilter - Filter Life Level
filter-left-timeNumber:TimeFilter - Filter Left Time
work-modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning-timeNumber:TimeVacuum Extend - Cleaning Time
cleaning-areaNumber:AreaVacuum Extend - Cleaning Area
cleaning-modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop-modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox-statusSwitchVacuum Extend - Water Tank Installed
task-statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break-point-restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet-pressSwitchVacuum Extend - Carpet Boost
serial-number1StringVacuum Extend - Serial Number
clean-rags-tipNumber:TimeVacuum Extend - Mop Pad Cleaning ReminderMinutes of mopping after which the robot reminds to clean the mop pad, 0 switches the reminder off. Offered by the Mi Home app of the p2036 with 15, 30 and 45 minutes
keep-sweeper-timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation-matchedStringVacuum Extend - Nation Matched
relocation-statusNumberVacuum Extend - Relocation Status
laser-switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of these models
clean-settingNumberVacuum Extend - Cleaning TypeSweeping only works without the water tank. Not offered by the Mi Home app of the p2036
sensitivityNumberVacuum Extend - Carpet Boost SensitivityNot shown by the Mi Home app of these models
mop-wayNumberVacuum Extend - Mopping PatternDeep mopping mops in a dense Z-shaped pattern. Not offered by the Mi Home app of the p2036
enableSwitchDo Not Disturb - Enable
start-timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end-timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult-map-stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice-packet-idStringAudio - Voice Packet Id
time-zoneStringTime - Time Zone
timer-cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first-clean-timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total-clean-timeNumber:TimeClean Logs - Total Clean Time
total-clean-timesNumberClean Logs - Total Clean Times
total-clean-areaNumber:AreaClean Logs - Total Clean Area
sensor-life-levelNumber:DimensionlessSensor - Sensor Life Level
sensor-left-timeNumber:TimeSensor - Sensor Left Time

Mi Robot Vacuum-Mop 1T (dreame.vacuum.p2041) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error","55"="Please start the robot in non-carpet area","56"="The 3D obstacle avoidance sensor is malfunctioning","58"="The ultrasonic sensor is malfunctioning","59"="No-Go zone or virtual wall detected"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Mi Robot Vacuum-Mop 2 Pro+ (dreame.vacuum.p2041o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error","55"="Please start the robot in non-carpet area","56"="The 3D obstacle avoidance sensor is malfunctioning","58"="The ultrasonic sensor is malfunctioning","59"="No-Go zone or virtual wall detected"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Xiaomi Robot Vacuum X10+ (dreame.vacuum.p2114a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Pad Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, the app offers 20) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionValues 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time

Mijia Omni Robot Vacuum-Mop (dreame.vacuum.p2114o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Pad Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, the app offers 20) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionValues 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time

Mijia Robot Vacuum-Mop 2C (dreame.vacuum.p2140) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it for the p2140 and p2140a only
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Mi Robot Vacuum-Mop 2C (dreame.vacuum.p2140a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it for the p2140 and p2140a only
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Mi Robot Vacuum-Mop 2 (dreame.vacuum.p2140o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it for the p2140 and p2140a only
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Mi Robot Vacuum-Mop 2 (dreame.vacuum.p2140p) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it for the p2140 and p2140a only
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Mi Robot Vacuum-Mop 2 (dreame.vacuum.p2140q) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it for the p2140 and p2140a only
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

Mijia Robot Vacuum-Mop Ultra Slim (dreame.vacuum.p2148o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Dust Bin Filter Life","diad-filter-reset-filter-life"="Reset Water Tank Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessDust Bin Filter - Filter Life Level
filter_left_timeNumber:TimeDust Bin Filter - Filter Left Time
diad_filter_life_levelNumber:DimensionlessWater Tank Filter - Filter Life LevelFilter of the 2-in-1 water tank as shown by the Mi Home app; not in the MIoT spec
diad_filter_left_timeNumber:TimeWater Tank Filter - Filter Left TimeFilter of the 2-in-1 water tank as shown by the Mi Home app; not in the MIoT spec
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot offered by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

Mijia Self-Cleaning Robot Vacuum-Mop Pro (dreame.vacuum.p2149o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (the app offers 5, 10 and 15 from robot firmware 1071) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningNot offered by the Mi Home app of this model
child_lockSwitchVacuum Extend - Child LockNot offered by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
electrolytic_waterSwitchVacuum Extend - Electrolyzed WaterOffered by the Mi Home app from robot firmware 1059; not in the MIoT spec
warn_statusNumberVacuum Extend - Warn Status
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time

Mi Robot Vacuum-Mop 2 Ultra (dreame.vacuum.p2150a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app offers it from robot firmware 1161 and only with a saved map
child_lockSwitchVacuum Extend - Child LockOffered by the Mi Home app from robot firmware 1083
clean_cancelNumberVacuum Extend - Clean Cancel
warn_statusNumberVacuum Extend - Warn Status
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]

Mi Robot Vacuum-Mop 2 Ultra Set (dreame.vacuum.p2150b) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app offers it from robot firmware 1161 and only with a saved map
child_lockSwitchVacuum Extend - Child LockOffered by the Mi Home app from robot firmware 1083
clean_cancelNumberVacuum Extend - Clean Cancel
warn_statusNumberVacuum Extend - Warn Status
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]

Mijia Robot Vacuum-Mop Dirt Disposal (dreame.vacuum.p2150o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app offers it from robot firmware 1161 and only with a saved map
child_lockSwitchVacuum Extend - Child LockOffered by the Mi Home app from robot firmware 1083
clean_cancelNumberVacuum Extend - Clean Cancel
warn_statusNumberVacuum Extend - Warn Status
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]

MOVA Z500 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2156o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Obstacle sensor error","3"="Collision sensor is stuck (Code 3)","4"="Vacuum is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal error (Code 7)","8"="Dust compartment has not been installed","11"="The filter may not be dry or may be blocked (Code 11)","12"="Some object may be wrapped around the main brush","13"="Some object may be wrapped around the side brush","14"="The filter may not be dry or may be blocked (Code 14)","15"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 15)","16"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 16)","17"="The vacuum-mop is stuck (Code 17)","18"="The vacuum-mop is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal error (Code 23)","24"="Visual positioning sensor error","25"="Internal error (Code 25)","26"="Optical sensor error","28"="Charging dock is not plugged in to a power outlet","29"="Battery error","30"="Internal error (Code 30)","31"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 31)","32"="The vacuum-mop is stuck, or its wheels may be blocked by an object (Code 32)","33"="Internal error (Code 33)","34"="Internal error (Code 34)","35"="Internal error (Code 35)","36"="Internal error (Code 36)","37"="Internal error (Code 37)","38"="Internal error (Code 38)","39"="Internal error (Code 39)","40"="Internal error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter may not be dry or may be blocked (Code 51)","54"="Wall sensor error","55"="Please start the robot in non-carpet area","56"="The 3D obstacle avoidance sensor is malfunctioning","58"="The ultrasonic sensor is malfunctioning","59"="No-Go zone or virtual wall detected"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
save_map_statusSwitchVslam Extend - Map SavingRead-only: switching it off clears the saved map and its settings

MOVA L600 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2157) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Cliff sensor error","3"="Collision sensor is stuck (Code 3)","4"="Robot is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal Error (Code 7)","8"="Dust bin not installed","11"="The filter not dry or blocked (Code 11)","12"="The main brush wrapped","13"="The side brush wrapped","14"="The filter not dry or blocked (Code 14)","15"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 15)","16"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 16)","17"="The robot is stuck (Code 17)","18"="The robot is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal Error (Code 23)","24"="Visual positioning sensor error","25"="Internal Error (Code 25)","26"="Optical sensor error","28"="The charging dock is not powered on","29"="Battery error","30"="Internal Error (Code 30)","31"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 31)","32"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 32)","33"="Internal Error (Code 33)","34"="Internal Error (Code 34)","35"="Internal Error (Code 35)","36"="Internal Error (Code 36)","37"="Internal Error (Code 37)","38"="Internal Error (Code 38)","39"="Internal Error (Code 39)","40"="Internal Error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter not dry or blocked (Code 51)","54"="Edge sensor error","55"="Please start the robot in non-carpet area","56"="The 3D obstacle avoidance sensor is malfunctioning","58"="The ultrasonic sensor is malfunctioning","59"="No-Go zone or virtual wall detected","101"="The dust collection bag is full, or the air duct is blocked (Code 101)","102"="The upper cover of auto-empty base is not closed, or the dust collection bag is not installed (Code 102)","103"="The upper cover of auto-empty base is not closed, or the dust collection bag is not installed (Code 103)","104"="The dust collection bag is full, or the air duct is blocked (Code 104)"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode; not in the MIoT spec of the dreame.vacuum.p2187
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Mop Pad Cleaning ReminderMinutes of mopping after which the robot reminds to clean the mop pad, 0 switches the reminder off. The Mi Home app offers 15, 30 and 45 minutes
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

DreameBot D9 Pro (dreame.vacuum.p2187) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Cliff sensor error","3"="Collision sensor is stuck (Code 3)","4"="Robot is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal Error (Code 7)","8"="Dust bin not installed","11"="The filter not dry or blocked (Code 11)","12"="The main brush wrapped","13"="The side brush wrapped","14"="The filter not dry or blocked (Code 14)","15"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 15)","16"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 16)","17"="The robot is stuck (Code 17)","18"="The robot is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal Error (Code 23)","24"="Visual positioning sensor error","25"="Internal Error (Code 25)","26"="Optical sensor error","28"="The charging dock is not powered on","29"="Battery error","30"="Internal Error (Code 30)","31"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 31)","32"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 32)","33"="Internal Error (Code 33)","34"="Internal Error (Code 34)","35"="Internal Error (Code 35)","36"="Internal Error (Code 36)","37"="Internal Error (Code 37)","38"="Internal Error (Code 38)","39"="Internal Error (Code 39)","40"="Internal Error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter not dry or blocked (Code 51)","54"="Edge sensor error","55"="Please start the robot in non-carpet area","56"="The 3D obstacle avoidance sensor is malfunctioning","58"="The ultrasonic sensor is malfunctioning","59"="No-Go zone or virtual wall detected","101"="The dust collection bag is full, or the air duct is blocked (Code 101)","102"="The upper cover of auto-empty base is not closed, or the dust collection bag is not installed (Code 102)","103"="The upper cover of auto-empty base is not closed, or the dust collection bag is not installed (Code 103)","104"="The dust collection bag is full, or the air duct is blocked (Code 104)"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode; not in the MIoT spec of the dreame.vacuum.p2187
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Mop Pad Cleaning ReminderMinutes of mopping after which the robot reminds to clean the mop pad, 0 switches the reminder off. The Mi Home app offers 15, 30 and 45 minutes
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

Dreame Bot D9 Max (dreame.vacuum.p2259) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels are suspended (Code 1)","2"="Cliff sensor error","3"="Collision sensor is stuck (Code 3)","4"="Robot is tilted","5"="Collision sensor is stuck (Code 5)","6"="Wheels are suspended (Code 6)","7"="Internal Error (Code 7)","8"="Dust bin not installed","11"="The filter not dry or blocked (Code 11)","12"="The main brush wrapped","13"="The side brush wrapped","14"="The filter not dry or blocked (Code 14)","15"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 15)","16"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 16)","17"="The robot is stuck (Code 17)","18"="The robot is stuck (Code 18)","20"="Low battery","21"="Charging error","23"="Internal Error (Code 23)","24"="Visual positioning sensor error","25"="Internal Error (Code 25)","26"="Optical sensor error","28"="The charging dock is not powered on","29"="Battery error","30"="Internal Error (Code 30)","31"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 31)","32"="The robot is stuck, or its main wheels may be blocked by foreign objects (Code 32)","33"="Internal Error (Code 33)","34"="Internal Error (Code 34)","35"="Internal Error (Code 35)","36"="Internal Error (Code 36)","37"="Internal Error (Code 37)","38"="Internal Error (Code 38)","39"="Internal Error (Code 39)","40"="Internal Error (Code 40)","41"="Strong magnetic field detected","47"="Route notification","48"="Laser distance sensor error","49"="Laser distance sensor bumper error","51"="The filter not dry or blocked (Code 51)","54"="Edge sensor error","55"="Please start the robot in non-carpet area","56"="The 3D obstacle avoidance sensor is malfunctioning","58"="The ultrasonic sensor is malfunctioning","59"="No-Go zone or virtual wall detected","101"="The dust collection bag is full, or the air duct is blocked (Code 101)","102"="The upper cover of auto-empty base is not closed, or the dust collection bag is not installed (Code 102)","103"="The upper cover of auto-empty base is not closed, or the dust collection bag is not installed (Code 103)","104"="The dust collection bag is full, or the air duct is blocked (Code 104)"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode; not in the MIoT spec of the dreame.vacuum.p2187
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Mop Pad Cleaning ReminderMinutes of mopping after which the robot reminds to clean the mop pad, 0 switches the reminder off. The Mi Home app offers 15, 30 and 45 minutes
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

DreameBot W10 Pro Self-Cleaning Robot Vacuum and Mop (dreame.vacuum.r2104) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it while carpet_distinguish is on
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for robots sold in China only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for robots sold in China only

DreameBot D10 Plus (dreame.vacuum.r2205) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
clean_settingNumberVacuum Extend - Cleaning TypeSweeping only works without the water tank
sensitivityNumberVacuum Extend - Carpet Boost SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mopping PatternDeep mopping mops in a dense Z-shaped pattern
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life LevelNot shown by the Mi Home app of this model
sensor_left_timeNumber:TimeSensor - Sensor Left TimeNot shown by the Mi Home app of this model

Xiaomi Robot Vacuum X10 (dreame.vacuum.r2209) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Water Tank Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
clean_settingNumberVacuum Extend - Clean SettingPacked setting in which the Mi Home app writes the cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming) and keeps the higher bits unchanged. To change the cleaning type, send the complete value with the higher bits unchanged. The app offers the cleaning type from robot firmware 1147
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
warn_statusNumberVacuum Extend - Warn Status
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time

Mijia Self-Cleaning Robot Vacuum-Mop 2 Pro (dreame.vacuum.r2210) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","detergent-reset-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summon Clean"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, the app offers 20) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionValues 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Using DetergentCleans the mop pads with detergent. Only 0 (off) and 1 (on) are sent, like the Mi Home app; the other values are only reported by the robot
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
auto_waterNumberVacuum Extend - Auto Water Refilling And DrainageValue mapping ["0"="Not Installed","1"="Installed"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

Xiaomi Robot Vacuum S10+ (dreame.vacuum.r2211o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Pad Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusNumberVacuum Extend - Water Tank and Mop StatusValue mapping ["0"="No Water Tank, No Mop","1"="Water Tank, No Mop","2"="No Water Tank, Mop","3"="Water Tank and Mop"]
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionAvoids carpets when on. Offered by the Mi Home app for robot firmware 1032 to 1053 and from 1060. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error; only 0 and 1 are sent, like the Mi Home app
warn_statusNumberVacuum Extend - Warn Status
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time

DreameBot X10 Pro (dreame.vacuum.r2215) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 10 to 35 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice Assistant
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for robots sold in China only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for robots sold in China only
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot L10s Pro (dreame.vacuum.r2216o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelValue mapping ["1"="Slightly Dry","2"="Moist","3"="Wet"]
waterbox_statusNumberVacuum Extend - Water Tank and Mop StatusValue mapping ["0"="No Water Tank, No Mop","1"="Water Tank, No Mop","2"="No Water Tank, Mop","3"="Water Tank and Mop"]
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostThe Mi Home app offers it while carpet_distinguish is on
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
clean_settingNumberVacuum Extend - Clean SettingPacked setting of which the Mi Home app writes the cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming). To change it, send the complete value with the other bits unchanged
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
nowater_tipsNumberVacuum Extend - No Water Warning
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time

DreameBot S10 (dreame.vacuum.r2228) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot L10s Ultra (dreame.vacuum.r2228o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot L10s Ultra (dreame.vacuum.r2228z) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot W10s Pro (dreame.vacuum.r2232a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsNot offered by the Mi Home app for the DreameBot W10s. Bit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 5 to 15 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice AssistantNot offered by the Mi Home app for the DreameBot W10s
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for the DreameBot L10s Prime sold in China or Taiwan only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for the DreameBot L10s Prime sold in China or Taiwan only

DreameBot L10s Prime (dreame.vacuum.r2232c) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsNot offered by the Mi Home app for the DreameBot W10s. Bit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 5 to 15 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice AssistantNot offered by the Mi Home app for the DreameBot W10s
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for the DreameBot L10s Prime sold in China or Taiwan only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for the DreameBot L10s Prime sold in China or Taiwan only

DreameBot S10 Pro (dreame.vacuum.r2233) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot X10 (dreame.vacuum.r2235) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 10 to 35 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice Assistant
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for robots sold in China only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for robots sold in China only
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot S10 Plus (dreame.vacuum.r2246) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 10 to 35 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice Assistant
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for robots sold in China only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for robots sold in China only
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot S10 Pro Plus (dreame.vacuum.r2247) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 10 to 35 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice Assistant
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for robots sold in China only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for robots sold in China only
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

DreameBot W10s (dreame.vacuum.r2251o) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsNot offered by the Mi Home app for the DreameBot W10s. Bit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged. The Mi Home app offers 5 to 15 square meters
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice AssistantNot offered by the Mi Home app for the DreameBot W10s
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left TimeShown by the Mi Home app for the DreameBot L10s Prime sold in China or Taiwan only
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life LevelShown by the Mi Home app for the DreameBot L10s Prime sold in China or Taiwan only

Mijia Infinite Robot Vacuum-Mop 1S (dreame.vacuum.r2254) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Pad Life","detergent-reset-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summon Clean"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet BoostNot shown by the Mi Home app of this model
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
relocation_statusNumberVacuum Extend - Relocation Status
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, the app offers 20) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionValues 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Using DetergentCleans the mop pads with detergent. Only 0 (off) and 1 (on) are sent, like the Mi Home app; the other values are only reported by the robot
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_assistantSwitchAudio - Voice AssistantOffered by the Mi Home app from firmware version 1038
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

Dreame L10s Pro Ultra Heat (dreame.vacuum.r2338) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

Dreame L10s Pro Ultra Heat (dreame.vacuum.r2338a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

Dreame L10s Pro Ultra Heat (dreame.vacuum.r2338h) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Pause Cleaning","vacuum-extend-stop-clean"="Stop Cleaning","battery-start-charge"="Return To Dock","collect-dust-start-collect"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-pause-mop-wash"="Pause Mop Washing","vacuum-resume-mop-wash"="Resume Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-station-clean"="Start Base Station Cleaning","vacuum-start-tank-drainage"="Drain Robot Water Tank","audio-position"="Find Robot","audio-play-sound"="Play Test Sound","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","sensor-reset-sensor-life"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Pad Life","silver-ion-reset-silverion-life"="Reset Silver Ion Life","detergent-reset-detergent-life"="Reset Detergent Life"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading"]
faultNumberRobot Cleaner - Device FaultNot used by the Mi Home app, which shows the codes of faults
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","24"="Summoned Clean Paused"]
break_point_restartSwitchVacuum Extend - Resume After ChargingReturns to the dock to charge when the battery is low and continues the cleaning afterwards
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot shown by the Mi Home app of this model
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - FaultsComma separated list of the active fault codes, 0 when there is none; a single code is shown with its label from the Mi Home app
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
laser_switchSwitchVacuum Extend - 3D Obstacle AvoidanceNot shown by the Mi Home app of this model
ai_switchNumberVacuum Extend - AI SettingsBit field of the AI settings: 1 furniture detection, 2 obstacle detection, 4 obstacle images in the map, 8 fluid detection, 16 pets at home, 32 upload of obstacle images, 64 obstacle image cleaning, 128 pet detection. The value is the sum of the enabled settings. To change one setting, send the complete value with the other bits unchanged
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Refilling Water"]
custom_enableSwitchVacuum Extend - Customized Room CleaningUses the cleaning settings per room of the saved map; the Mi Home app only allows it with a saved map
child_lockSwitchVacuum Extend - Child Lock
sensitivityNumberVacuum Extend - SensitivityNot shown by the Mi Home app of this model
mop_wayNumberVacuum Extend - Mop WayNot shown by the Mi Home app of this model
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_distinguishNumberVacuum Extend - Carpet RecognitionThe Mi Home app writes 3 instead of 0 to switch it off while carpet_press is on. Values 2, 4, 5 and 6 are reported while the carpet sensor has an error
autowash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pad during a cleaning task
warn_statusNumberVacuum Extend - Warn Status
carpet_cleanNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_distinguish is on
auto_add_detergentNumberVacuum Extend - Auto Add DetergentValue 2 is reported when the detergent bottle is missing, 4 when the detergent and the auto-adding module are missing and 5 when the module is missing
dry_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
nowater_tipsNumberVacuum Extend - No Water Warning
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeValue mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
mult_map_stateSwitchMap - Multi-floor MapsRead-only: switching it off makes the robot keep only the map in use
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area
auto_collectSwitchCollect Dust - Auto Dust Collection
clean_timesNumberCollect Dust - Dust Collection FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings"]
dust_enableNumberCollect Dust - Dust EnableValue mapping ["0"="Disable","1"="Enable"]
dust_statusNumberCollect Dust - Dust StatusValue mapping ["0"="Idle","1"="Collecting","2"="Paused By Do Not Disturb"]
sensor_life_levelNumber:DimensionlessSensor - Sensor Life Level
sensor_left_timeNumber:TimeSensor - Sensor Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
silverion_life_timeNumber:TimeSilver Ion - Silver Ion Left Time
silverion_life_levelNumber:DimensionlessSilver Ion - Silver Ion Life Level
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life Level

HUIZUO ARIES For Bedroom (huayi.light.ari013) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO ARIES For Living Room (huayi.light.aries) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO Fan Light (huayi.light.fanwy) Channels ​

ChannelTypeDescriptionComment
onSwitchLight - Power
brightnessDimmerLight - Brightness
color_temperatureNumber:TemperatureLight - Color Temperature
on1SwitchFan - Power
fan_levelNumberFan - Speed
fan_reverseSwitchFan - Reverse
modeNumberFan - ModeValue mapping ["1"="Normal Wind","2"="Natural Wind"]

HUIZUO Fan Light(2020) (huayi.light.fanwy2) Channels ​

ChannelTypeDescriptionComment
onSwitchLight - Power
brightnessDimmerLight - Brightness
color_temperatureNumber:TemperatureLight - Color Temperature
on1SwitchFan - Power
fan_levelNumberFan - Speed
modeNumberFan - ModeValue mapping ["0"="Normal Wind","1"="Natural Wind"]
preset_color_temperatureNumber:TemperaturePreset - Color Temperature
preset_brightnessNumber:DimensionlessPreset - Brightness
preset_fan_levelNumberPreset - Fan Speed
fan_directionNumberFan - DirectionValue mapping ["0"="Forward","1"="Reverse"]
presetSwitchPreset
swingSwitchFan - Swing

HUIZUO PEGASUS For Living Room (huayi.light.peg091) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO PEGASUS For Bedroom (huayi.light.peg093) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO PISCES For Bedroom (huayi.light.pis123) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO PISCES For Living Room (huayi.light.pisces) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO TAURUS For Bedroom (huayi.light.tau023) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO TAURUS For Living Room (huayi.light.taurus) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO VIRGO For Bedroom (huayi.light.vir063) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO VIRGO For Living Room (huayi.light.virgo) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO Ceiling Light (huayi.light.wy) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUAYI LIGHTING COMMON CEILING LIGHT (huayi.light.wy002) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO LIANGCHEN(BLE Mesh) (huayi.light.wy200) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO SAG Downlight (BLE Mesh) (huayi.light.wy201) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO Bulb (BLE Mesh) (huayi.light.wy202) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO YONG Downlight (BLE Mesh) (huayi.light.wy203) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

huayi.light.wy204 (huayi.light.wy204) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

HUIZUO Heating Lamp (huayi.light.wyheat) Channels ​

ChannelTypeDescriptionComment
onSwitchLight - Power
brightnessDimmerLight - Brightness
color_temperatureNumber:TemperatureLight - Color Temperature
on1SwitchHeater - PowerThe heater has no time limit of its own; it runs until it is switched off.
heat_levelNumberHeater - LevelValue mapping ["1"="Low","2"="Middle","3"="High"]
screen_lightSwitchDevice Screen Light

HUIZUO ZIWEI Ceiling Lamp (huayi.light.zw131) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature

Mi Robot Vacuum-Mop Pro (ijai.vacuum.v1) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Stain Identification
pet_recognizeSwitchSweep - Pet Recognition
ai_recognizeSwitchSweep - AI Recognition
carpet_boosterSwitchSweep - Carpet Boost
carpet_avoidSwitchSweep - Carpet Avoidance
multi_prop_vacuumStringSweep - Status Data
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapNumberMap - New Map To SaveValue mapping ["0"="No New Map","1"="New Map To Save"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Mi Robot Vacuum-Mop 2 (ijai.vacuum.v2) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","uk_UK"="Ukrainian"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
multi_prop_vacuumStringSweep - Status Data
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapNumberMap - New Map To SaveValue mapping ["0"="No New Map","1"="New Map To Save"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Mi Robot Vacuum-Mop 2 Pro (ijai.vacuum.v3) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","uk_UK"="Ukrainian"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
multi_prop_vacuumStringSweep - Status Data
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapNumberMap - New Map To SaveValue mapping ["0"="No New Map","1"="New Map To Save"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Mi Robot Vacuum-Mop 2 Lite (ijai.vacuum.v10) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
multi_prop_vacuumStringSweep - Status Data
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapNumberMap - New Map To SaveValue mapping ["0"="No New Map","1"="New Map To Save"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Mijia Robot Vacuum-Mop 2Pro (ijai.vacuum.v13) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Stain Identification
pet_recognizeSwitchSweep - Pet Recognition
ai_recognizeSwitchSweep - AI Recognition
carpet_boosterSwitchSweep - Carpet Boost
carpet_avoidSwitchSweep - Carpet Avoidance
multi_prop_vacuumStringSweep - Status Data
tank_shakeSwitchSweep - Mop Vibration
electrolysisSwitchSweep - Water Electrolysis
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapNumberMap - New Map To SaveValue mapping ["0"="No New Map","1"="New Map To Save"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Mijia Self-Cleaning Robot Vacuum-Mop (ijai.vacuum.v14) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)","vacuum-start-mop-wash"="Start Mop Washing","vacuum-start-mop-dry"="Start Mop Drying","vacuum-stop-mop-wash-dry"="Stop Mop Washing or Drying"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating","9"="Mop Washing","10"="Mop Drying"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageThe app sends zh_JP (not ja_JP) for Japanese. Value mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","th_TH"="Thai","zh_JP"="Japanese"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Stain Identification
pet_recognizeSwitchSweep - Pet Recognition
ai_recognizeSwitchSweep - AI Recognition
carpet_boosterSwitchSweep - Carpet Boost
carpet_avoidSwitchSweep - Carpet Avoidance
carpet_showSwitchSweep - Carpet Display
multi_prop_vacuumStringSweep - Status Data
tank_shakeSwitchSweep - Mop Vibration
electrolysisSwitchSweep - Water Electrolysis
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
pause_drying_dndSwitchSweep - Pause Drying During Do Not Disturb
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapNumberMap - New Map To SaveValue mapping ["0"="No New Map","1"="New Map To Save"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Xiaomi Robot Vacuum S10 (ijai.vacuum.v17) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","ar_SA"="Arabic","he_IL"="Hebrew","th_TH"="Thai","ja_JP"="Japanese","uk_UA"="Ukrainian"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Stain Identification
pet_recognizeSwitchSweep - Pet Recognition
ai_recognizeSwitchSweep - AI Recognition
carpet_boosterSwitchSweep - Carpet Boost
multi_prop_vacuumStringSweep - Status Data
carpet_avoidSwitchSweep - Carpet Avoidance
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapSwitchMap - New Map To Save
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Mijia Robot Vacuum-Mop 3C (ijai.vacuum.v18) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","ar_SA"="Arabic","he_IL"="Hebrew","th_TH"="Thai","ja_JP"="Japanese","uk_UA"="Ukrainian"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Stain Identification
pet_recognizeSwitchSweep - Pet Recognition
ai_recognizeSwitchSweep - AI Recognition
carpet_boosterSwitchSweep - Carpet Boost
multi_prop_vacuumStringSweep - Status Data
carpet_avoidSwitchSweep - Carpet Avoidance
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapSwitchMap - New Map To Save
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

Xiaomi Robot Vacuum-Mop 2S (ijai.vacuum.v19) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-stop-edge-sweeping"="Stop Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","vacuum-reset-main-brush"="Reset Main Brush Life","vacuum-reset-side-brush"="Reset Side Brush Life","vacuum-reset-filter"="Reset Filter Life","vacuum-reset-mop"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-stop-sweeping"="Stop (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","ar_SA"="Arabic","he_IL"="Hebrew","th_TH"="Thai","ja_JP"="Japanese","uk_UA"="Ukrainian"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Stain Identification
pet_recognizeSwitchSweep - Pet Recognition
ai_recognizeSwitchSweep - AI Recognition
carpet_boosterSwitchSweep - Carpet Boost
multi_prop_vacuumStringSweep - Status Data
carpet_avoidSwitchSweep - Carpet Avoidance
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
all_enable_countStringSchedule - Schedule Count
target_pointStringPoint Zone - Target Point
remember_stateSwitchMap - Remember Map
cur_map_idNumberMap - Current Map Id
map_numNumberMap - Number of Maps
cur_cleaning_pathStringMap - Current Cleaning Path
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
has_new_mapSwitchMap - New Map To Save
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

IKEA E27 white spectrum opal (ikea.light.led1545g12) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

IKEA E27 white spectrum clear (ikea.light.led1546g12) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

IKEA E14 white spectrum (ikea.light.led1536g5) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

IKEA GU10 white spectrum (ikea.light.led1537r6) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

IKEA E27 warm white (ikea.light.led1623g12) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

IKEA GU10 warm white (ikea.light.led1650r5) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

IKEA E14 warm white (ikea.light.led1649c5) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

leshow fan (leshow.fan.ss4) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan Speed
modeNumberModeValue mapping ["0"="Standard","1"="Sleep"]
swing_modeNumberOscillationValue mapping ["0"="Off","1"="Horizontal","2"="Vertical","3"="Horizontal and Vertical"]
off_delay_timeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
ledSwitchLightWrite only, the state is not reported by the device
faultNumberDevice Fault

Xiaomiyoupin Curtain Controller (Wi-Fi) (lumi.curtain.hagl05) Channels ​

ChannelTypeDescriptionComment
faultNumberCurtain - Device FaultValue mapping ["0"="No faults"]
motor_controlNumberCurtain - Motor ControlValue mapping ["0"="Pause","1"="Open","2"="Close","3"="auto"]
current-positionNumber:DimensionlessCurtain - Current Position
statusNumberCurtain - StatusValue mapping ["0"="Stopped","1"="Opening","2"="Closing"]
target-positionNumber:DimensionlessCurtain - Target Position
manual-enabledNumbercurtain_cfg - Manual EnabledValue mapping ["0"="Disable","1"="Enable"]
polarityNumberCurtain_cfg - PolarityValue mapping ["0"="Positive","1"="Reverse"]
pos-limitNumbercurtain_cfg - Position LimitValue mapping ["0"="Unlimit","1"="Limit"]
en_night_tip_lightNumberCurtain_cfg - En_night_tip_lightValue mapping ["0"="Disable","1"="Enable"]
run-timeNumberCurtain_cfg - Run-time
adjust_valueNumberMotor_controller - Adjust_value

Aqara Curtain Controller A1 (lumi.curtain.hagl08) Channels ​

ChannelTypeDescriptionComment
faultNumberCurtain - Device FaultValue mapping ["0"="No Faults"]
motor_controlNumberCurtain - Motor ControlValue mapping ["0"="Pause","1"="Open","2"="Close","3"="Toggle"]
current_positionNumber:DimensionlessCurtain - Current Position
statusNumberCurtain - StatusValue mapping ["0"="Stopped","1"="Opening","2"="Closing"]
target_positionNumber:DimensionlessCurtain - Target Position
manual_enabledNumberCurtain Config - Manual Pull To StartValue mapping ["0"="Disable","1"="Enable"]
polarityNumberCurtain Config - Motor DirectionValue mapping ["0"="Normal","1"="Reversed"]
pos_limitNumberCurtain Config - Position LimitValue mapping ["0"="Unlimited","1"="Limit"]
en_night_tip_lightNumberCurtain Config - Night Indicator LightValue mapping ["0"="Disable","1"="Enable"]
run_timeNumberCurtain Config - Run Time
f_one_positionNumber:DimensionlessRemote Button - F1 Preset Position
f_two_positionNumber:DimensionlessRemote Button - F2 Preset Position
f_three_positionNumber:DimensionlessRemote Button - F3 Preset Position

Mi Smart Home Hub (lumi.gateway.mgl03) Channels ​

ChannelTypeDescriptionComment
telnetEnableSwitchEnable TelnetAccess the device with telnet to further unlock developer mode. See forum
doorbellVolNumberDoorbell Volume
gatewayVolNumberGateway Volume
alarmingVolNumberAlarming Volume
doorbellPushStringDoorbell Push

Mi smart Home Gateway Hub (lumi.gateway.mieu01) Channels ​

ChannelTypeDescriptionComment
guardSwitchGuard
corridorSwitchAutomatic Night Light
nightlightColorNight Light
rgbColorColored Light
doorbell_volumeNumberDoorbell Volume
alarming_volumeNumberAlarming Volume
gateway_volumeNumberGateway Volume
arming_timeNumber:TimeArming Time
corridor_on_timeNumber:TimeCorridor on time
languageStringVoice prompt Language
zigbee_channelStringZigbee Channel
lumi_bindStringLumi_bind info
doorbell_pushStringDoorbell Push
fm_powerSwitchFM Radio PowerStarts or stops the FM (internet) radio. Experimental, please provide feedback on the community forum.
fm_volumeDimmerFM Radio VolumeExperimental, please provide feedback on the community forum.
fm_statusStringFM Radio StatusExperimental, please provide feedback on the community forum.
fm_programNumberFM Radio ProgramId of the current radio program. Experimental, please provide feedback on the community forum.

Mi smart Home Gateway Hub v1 (lumi.gateway.v1) Channels ​

ChannelTypeDescriptionComment
telnetEnableSwitchEnable TelnetAccess the device with telnet to further unlock developer mode. See forum
doorbellVolNumberDoorbell Volume
gatewayVolNumberGateway Volume
alarmingVolNumberAlarming Volume
doorbellPushStringDoorbell Push
fmPowerSwitchFM Radio PowerStarts or stops the FM (internet) radio. Experimental, please provide feedback on the community forum.
fmVolumeDimmerFM Radio VolumeExperimental, please provide feedback on the community forum.
fmStatusStringFM Radio StatusExperimental, please provide feedback on the community forum.
fmProgramNumberFM Radio ProgramId of the current radio program. Experimental, please provide feedback on the community forum.

Mi smart Home GatewayHub v2 (lumi.gateway.v2) Channels ​

ChannelTypeDescriptionComment
telnetEnableSwitchEnable TelnetAccess the device with telnet to further unlock developer mode. See forum
doorbellVolNumberDoorbell Volume
gatewayVolNumberGateway Volume
alarmingVolNumberAlarming Volume
doorbellPushStringDoorbell Push
fmPowerSwitchFM Radio PowerStarts or stops the FM (internet) radio. Experimental, please provide feedback on the community forum.
fmVolumeDimmerFM Radio VolumeExperimental, please provide feedback on the community forum.
fmStatusStringFM Radio StatusExperimental, please provide feedback on the community forum.
fmProgramNumberFM Radio ProgramId of the current radio program. Experimental, please provide feedback on the community forum.

Mi smart Home Gateway Hub v3 (lumi.gateway.v3) Channels ​

ChannelTypeDescriptionComment
telnetEnableSwitchEnable TelnetAccess the device with telnet to further unlock developer mode. See forum
doorbellVolNumberDoorbell Volume
gatewayVolNumberGateway Volume
alarmingVolNumberAlarming Volume
doorbellPushStringDoorbell Push
fmPowerSwitchFM Radio PowerStarts or stops the FM (internet) radio. Experimental, please provide feedback on the community forum.
fmVolumeDimmerFM Radio VolumeExperimental, please provide feedback on the community forum.
fmStatusStringFM Radio StatusExperimental, please provide feedback on the community forum.
fmProgramNumberFM Radio ProgramId of the current radio program. Experimental, please provide feedback on the community forum.

Aqara LED Light Bulb (Tunable White) (lumi.light.aqcn02) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
colour_temperatureNumberColor Temperature

Door lock (lumi.lock.v1) Channels ​

ChannelTypeDescriptionComment
statusStringStatus
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Door Lock (lumi.lock.aq1) Channels ​

ChannelTypeDescriptionComment
statusStringStatus
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Door Lock S2 (lumi.lock.acn02) Channels ​

ChannelTypeDescriptionComment
statusStringStatus
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Door lock S2 Pro (lumi.lock.acn03) Channels ​

ChannelTypeDescriptionComment
statusStringStatus
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Mi Smart Plug (Zigbee) (lumi.plug.mmeu01) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
load_powerNumberLoad Power
en_night_tip_lightSwitchLed Light
poweroff_memorySwitchPoweroff Memory
max_powerNumberMax Power
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data.

Mi Window and Door Sensor (lumi.sensor_magnet.v2) Channels ​

ChannelTypeDescriptionComment
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data.

Aqara Motion Sensor (lumi.sensor_motion.aq2) Channels ​

ChannelTypeDescriptionComment
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Mi Motion Sensor (lumi.sensor_motion.v2) Channels ​

ChannelTypeDescriptionComment
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Mi Temperature and Humidity Sensor (lumi.sensor_ht.v1) Channels ​

ChannelTypeDescriptionComment
temperatureNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity

Water Leak Sensor (lumi.sensor_wleak.aq1) Channels ​

ChannelTypeDescriptionComment
leakSwitchLeaking
logStringDevice LogThis channel uses cloud to get data. See widget market place for suitable widget to display the data

Aqara Temperature and Humidity Sensor (lumi.weather.v1) Channels ​

ChannelTypeDescriptionComment
temperatureNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
pressureNumber:Pressurepressure

Mi Robot Vacuum-Mop Essential (mijia.vacuum.v2) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["start"="Start Cleaning","stop"="Pause Cleaning","dock"="Return To Dock","stopdock"="Stop Returning To Dock","findme"="Find Robot"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Cleaning","3"="Paused","4"="Error","5"="Charging","6"="Go Charging"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Left Wheel Error","2"="Right Wheel Error","3"="Cliff Sensor Error","4"="Low Battery","5"="Collision Sensor Error","6"="Main Brush Error","7"="Side Brush Error","8"="Fan Error","9"="Dust Compartment Or Water Tank Missing","10"="Charging Error","11"="Insufficient Water","12"="Robot Off The Floor"]
modeNumberRobot Cleaner - ModeValue mapping ["1"="Auto Clean","2"="Spot Clean","3"="Edge Clean"]
target_water_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
fan_levelNumberRobot Cleaner - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["0"="Not Charging","1"="Charging","2"="Charging Complete"]
alarmSwitchAlarm - Voice Prompts
volumeNumber:DimensionlessAlarm - Volume
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
clean_areaNumber:AreaClean Record - Clean Area
clean_timeNumber:TimeClean Record - Clean Time
total_clean_areaNumber:AreaClean Record - Total Clean Area
total_clean_timeNumber:TimeClean Record - Total Clean Time
total_clean_countNumberClean Record - Total Clean Count
languageNumberVoice - LanguageValue mapping ["0"="English","1"="Chinese","2"="Spanish","3"="Russian","4"="Italian","5"="French","6"="German","7"="Korean","8"="Polish"]
not_disturb_switchSwitchVoice - Do Not Disturb
mop_statusSwitchOther Status - Mop Installed

Xiaomi Smart Pet Food Feeder (mmgg.feeder.fi1) Channels ​

ChannelTypeDescriptionComment
food_levelNumberFood LevelValue mapping ["0"="Normal","1"="Low","2"="Empty"]
dispense_foodNumberDispense FoodDispenses the given number of portions
indicator_lightSwitchIndicator Light
cover_openSwitchFood Compartment Cover Open
feeder_blockedSwitchFeeder BlockedOn when the food outlet is blocked; dispensing then fails
feeding_scheduleSwitchFeeding ScheduleTurns the feeding schedule set in the app on or off
child_lockSwitchChild LockDisables the buttons of the feeder
remain_clean_timeNumber:TimeTime Until Cleaning
desiccant_left_timeNumber:TimeDesiccant Left Time
resetStringResetResets the remaining days after replacing the desiccant

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s1) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults"]
powerSwitchPowerOff stops the water flow
modeNumberModeValue mapping ["1"="Normal","2"="Smart"]
filter_left_timeNumber:TimeFilter Left Time
indicator_lightSwitchIndicator Light
cotton_left_timeNumber:TimeCotton Filter Left Time
remain_clean_timeNumber:TimeTime Until Cleaning
no_water_flagSwitchWater PresentOff when the water tank is empty
no_water_timeNumber:TimeNo Water Duration
pump_block_flagSwitchPump BlockedOn when the pump is jammed and needs cleaning
lid_up_flagSwitchLid Lifted
resetStringResetResets the remaining days after replacing the filter or cotton filter, or after cleaning

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s2) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults"]
powerSwitchPowerOff stops the water flow
modeNumberModeValue mapping ["1"="Normal","2"="Smart"]
filter_left_timeNumber:TimeFilter Left Time
indicator_lightSwitchIndicator Light
cotton_left_timeNumber:TimeCotton Filter Left Time
remain_clean_timeNumber:TimeTime Until Cleaning
no_water_flagSwitchWater PresentOff when the water tank is empty
no_water_timeNumber:TimeNo Water Duration
pump_block_flagSwitchPump BlockedOn when the pump is jammed and needs cleaning
resetStringResetResets the remaining days after replacing the filter or cotton filter, or after cleaning

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s3) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults"]
powerSwitchPowerOff stops the water flow
modeNumberModeValue mapping ["1"="Normal","2"="Smart"]
filter_left_timeNumber:TimeFilter Left Time
indicator_lightSwitchIndicator Light
cotton_left_timeNumber:TimeCotton Filter Left Time
remain_clean_timeNumber:TimeTime Until Cleaning
no_water_flagSwitchWater PresentOff when the water tank is empty
no_water_timeNumber:TimeNo Water Duration
pump_block_flagSwitchPump BlockedOn when the pump is jammed and needs cleaning
resetStringResetResets the remaining days after replacing the filter or cotton filter, or after cleaning

XIAOWAN Smart Pet Water Dispenser (mmgg.pet_waterer.s4) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults"]
powerSwitchPowerOff stops the water flow
modeNumberModeValue mapping ["1"="Normal","2"="Smart"]
filter_left_timeNumber:TimeFilter Left Time
indicator_lightSwitchIndicator Light
cotton_left_timeNumber:TimeCotton Filter Left Time
remain_clean_timeNumber:TimeTime Until Cleaning
no_water_flagSwitchWater PresentOff when the water tank is empty
no_water_timeNumber:TimeNo Water Duration
pump_block_flagSwitchPump BlockedOn when the pump is jammed and needs cleaning
resetStringResetResets the remaining days after replacing the filter or cotton filter, or after cleaning

Xiaomi Smart Pet Fountain (mmgg.pet_waterer.wi11) Channels ​

ChannelTypeDescriptionComment
powerSwitchPowerOff stops the water flow
faultNumberFaultValue mapping ["0"="No Faults"]
modeNumberModeValue mapping ["1"="Normal","2"="Smart"]
filter_left_timeNumber:TimeFilter Left Time
indicator_lightSwitchIndicator Light
cotton_left_timeNumber:TimeCotton Filter Left Time
remain_clean_timeNumber:TimeTime Until Cleaning
no_water_flagSwitchWater PresentOff when the water tank is empty
no_water_timeNumber:TimeNo Water Duration
pump_block_flagSwitchPump BlockedOn when the pump is jammed and needs cleaning
lid_up_flagSwitchLid Lifted
resetStringResetResets the remaining days after replacing the filter or cotton filter, or after cleaning

MR.BOND (mrbond.airer.m0) Channels ​

ChannelTypeDescriptionComment
ledSwitchLED
motorNumberMotorValue mapping ["0"="Stop","1"="Rise","2"="Down"]
airer_locationNumberAirer LocationValue mapping ["0"="Normal","1"="Highest","2"="Lowest"]

MR.BOND (mrbond.airer.m1pro) Channels ​

ChannelTypeDescriptionComment
drySwitchDryOnly available when the airer is at its highest position. ON starts the shortest drying cycle (30 minutes), use the drymode channel to select the drying time. The channel is ON for any running drying cycle.
drymodeNumberDry ModeOnly available when the airer is at its highest position. Write only, the current drying state is shown by the dry channel. Value mapping ["0"="Off","1"="30 minutes","2"="60 minutes","3"="90 minutes","4"="120 minutes"]. Mode 4 is sent with set_dryswitch, like the Mi Home app does.
ledSwitchLED
motorNumberMotorValue mapping ["0"="Stop","1"="Rise","2"="Down"]
drytimeNumber:TimeDry Time
airer_locationNumberAirer LocationValue mapping ["0"="Normal","1"="Highest","2"="Lowest"]

MR.BOND (mrbond.airer.m1s) Channels ​

ChannelTypeDescriptionComment
ledSwitchLED
motorNumberMotorValue mapping ["0"="Stop","1"="Rise","2"="Down"]
airer_locationNumberAirer LocationValue mapping ["0"="Normal","1"="Highest","2"="Lowest"]

MR.BOND (mrbond.airer.m1super) Channels ​

ChannelTypeDescriptionComment
drySwitchDryOnly available when the airer is at its highest position. ON starts the shortest drying cycle (30 minutes), use the drymode channel to select the drying time. The channel is ON for any running drying cycle.
drymodeNumberDry ModeOnly available when the airer is at its highest position. Write only, the current drying state is shown by the dry channel. Value mapping ["0"="Off","1"="30 minutes","2"="60 minutes","3"="90 minutes","4"="120 minutes"]. Mode 4 is sent with set_dryswitch, like the Mi Home app does.
ledSwitchLED
motorNumberMotorValue mapping ["0"="Stop","1"="Rise","2"="Down"]
drytimeNumber:TimeDry Time
airer_locationNumberAirer LocationValue mapping ["0"="Normal","1"="Highest","2"="Lowest"]
disinfectSwitchDisinfectOnly available when the airer is at its highest position.
distimeNumber:TimeDisinfect Time

NWT/Widetech Intelligent Dehumidifier 16L (nwt.derh.16l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="E1: Temperature Sensor Fault","2"="E2: Copper Pipe Sensor Fault","3"="E4: Motor Fault"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
modeNumberModeValue mapping ["1"="Dehumidify","2"="Dry"]
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder

NWT/Widetech Internet Air Clean Dehumidifier 24L (nwt.derh.24wu1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","2"="E2: Copper Pipe Sensor Fault","3"="E4: Motor Fault","4"="E5: MCU Communication Fault","5"="E9: Dust Sensor Fault"]
modeNumberModeValue mapping ["0"="Auto","1"="Dehumidify","2"="Continuous","3"="Off"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
fan_levelNumberFan LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
dry_clothesNumberDry ClothesValue mapping ["0"="Auto","1"="Low","2"="High","3"="Off"]
swing_windNumberSwingValue mapping ["0"="Auto","1"="Horizontal","2"="Vertical","3"="Off"]
uvNumberUV-CValue mapping ["0"="Auto","1"="Low","2"="High","3"="Off"]
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting

NWT/Widetech Internet Dehumidifier 12L (nwt.derh.312en) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults"]
modeNumberModeValue mapping ["1"="Target Humidity","2"="Dry Clothes"]
target_humidityNumber:DimensionlessTarget HumidityValue mapping ["30"="30%","40"="40%","50"="50%","60"="60%","70"="70%"]
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
coil_temperatureNumber:TemperatureCoil Temperature
compressorSwitchCompressor
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
timerNumber:TimeTimer Remaining
timer_settingNumberOff TimerValue mapping ["0"="Off","1"="1 Hour","2"="2 Hours","4"="4 Hours","8"="8 Hours","12"="12 Hours"]

NWT/Widetech Internet Dehumidifier 30L (nwt.derh.330ef) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults"]
modeNumberModeValue mapping ["1"="Target Humidity","2"="Continuous","3"="Dry Clothes"]
target_humidityNumber:DimensionlessTarget HumidityValue mapping ["30"="30%","40"="40%","50"="50%","60"="60%","70"="70%"]
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
coil_temperatureNumber:TemperatureCoil Temperature
compressorSwitchCompressor
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
fallen_overSwitchFallen Over
pumpSwitchDrain PumpRead only: the app only allows switching the drain pump when the drain pipe is connected
pump_pipe_installedSwitchDrain Pipe Connected
timerNumber:TimeTimer Remaining
timer_settingNumberOff TimerValue mapping ["0"="Off","1"="1 Hour","2"="2 Hours","4"="4 Hours","8"="8 Hours","12"="12 Hours"]

Lumias 20L Dehumidifier (nwt.derh.las20l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="E1: Temperature Sensor Fault","2"="E2: Copper Pipe Sensor Fault"]
target_humidityNumber:DimensionlessTarget Humidity
fan_levelNumberFan LevelValue mapping ["0"="Low","1"="High"]
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder
swingSwitchSwing

Lumias 12L Dehumidifier (nwt.derh.lua12l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="E1: Temperature Sensor Fault","2"="E2: Copper Pipe Sensor Fault"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify; Value mapping ["40"="40%","50"="50%","60"="60%"]
modeNumberModeValue mapping ["0"="Dehumidify","1"="Continuous"]
humidityNumber:DimensionlessHumidity
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting

Lumias 30L Dehumidifier (nwt.derh.lua30l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="E1: Temperature Sensor Fault","2"="E2: Copper Pipe Sensor Fault"]
modeNumberModeValue mapping ["0"="Dehumidify","1"="Continuous"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
fan_levelNumberFan LevelValue mapping ["0"="Low","1"="High"]
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder

Lumias 12L (nwt.derh.lus12l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Copper Pipe Sensor Fault","2"="MCU Communication Fault"]
modeNumberModeValue mapping ["0"="Dehumidify","1"="Dry","2"="Continuous"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
ledSwitchIndicator Light
humidityNumber:DimensionlessHumidity

Lumias 20L (nwt.derh.lus20l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Temperature Sensor Fault","2"="Copper Pipe Sensor Fault"]
fan_levelNumberFan LevelUsed in the mode Dehumidify; Value mapping ["0"="Low","1"="High"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
modeNumberModeValue mapping ["0"="Dehumidify","1"="Dry"]
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder
humidityNumber:DimensionlessHumidity

Lumias 26L Dehumidifier (nwt.derh.lus24l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","2"="Copper Pipe Sensor Fault","3"="Motor Fault","4"="MCU Communication Fault"]
modeNumberModeOff while dry clothes or UV is active; Value mapping ["0"="Auto","1"="Dehumidify","2"="Continuous","3"="Off"]
fan_levelNumberFan LevelValue mapping ["0"="Silent","1"="Low","2"="High"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
ledSwitchIndicator Light
dry_clothesNumberDry ClothesValue mapping ["0"="Auto","1"="Low","2"="High","3"="Off"]
swing_windNumberSwingValue mapping ["0"="Auto","1"="Horizontal","2"="Vertical","3"="Off"]
uvNumberUVValue mapping ["0"="Silent","1"="Low","2"="High","3"="Off"]
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
humidityNumber:DimensionlessHumidity

Lumias 30L Dehumidifier (nwt.derh.lus30l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Copper Pipe Sensor Fault","2"="Motor Fault"]
modeNumberModeValue mapping ["0"="Auto","1"="Dry","2"="Dehumidify","3"="Sleep"]
fan_levelNumberFan LevelUsed in the mode Dehumidify; Value mapping ["0"="Low","1"="Medium","2"="High"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder
swingSwitchSwing

Lumias 60L (nwt.derh.lus60l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Copper Pipe Sensor Fault"]
modeNumberModeValue mapping ["0"="Dehumidify","1"="Dry"]
fan_levelNumberFan LevelUsed in the mode Dehumidify; Value mapping ["0"="Low","1"="High"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder

NWT/Widetech Intelligent Dehumidifier 12L (nwt.derh.nwt12l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="E1: Temperature Sensor Fault","2"="E2: Copper Pipe Sensor Fault","3"="E4: Motor Fault"]
target_humidityNumber:DimensionlessTarget HumidityUsed in the mode Dehumidify
modeNumberModeValue mapping ["1"="Dehumidify","2"="Dry"]
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_fullSwitchWater Tank Full
defrostSwitchDefrosting
filter_cleaningSwitchFilter Cleaning Reminder

NWT/Widetech Internet Dehumidifier 18L (nwt.derh.wdh318efw1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Target Humidity","on"="Continuous","dry_cloth"="Dry Clothes"]
target_humidityNumber:DimensionlessTarget HumidityValue mapping ["40"="40%","50"="50%","60"="60%"]
fan_levelNumberFan LevelOnly in the modes target humidity and continuous; Value mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
fan_speedNumberFan Speed
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
water_tank_fullSwitchWater Tank Full
compressorSwitchCompressor
defrostSwitchDefrosting
alarmStringAlarm

Xiaomi Smart Sleep and Wake-up Light (philips.light.aibed) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
colorColorColor
colorModeNumberColor ModeValue mapping ["0"="Color Temperature","1"="Color"]
modeMainNumberModeValue mapping ["0"="Light Mode","1"="Sleep Mode","2"="Scene Mode"]
modeLightNumberLight Mode PresetIndex of the light mode preset; the presets are configured in the Mi Home app.
modeSleepNumberSleep Mode PresetValue mapping ["0"="Sunset","1"="Cozy Bonfire","2"="Wonderful Journey","3"="Hill Rain"]
modeSceneNumberScene Mode PresetValue mapping ["0"="Wonderful Journey","1"="Cozy Bonfire","2"="Breathing and Meditation","3"="Hill Rain","4"="Northern European Aurora","5"="Beach Walk","6"="Early Spring","7"="Midsummer Lime","8"="Late Fall","9"="Winter Sunshine"]
dvNumber:TimeDelayed Turn-off
sleepDurationNumber:TimeSleep Mode DurationIn sleep mode the brightness decreases progressively until the light turns off after this time.
sleepRemainTimeNumber:TimeSleep Mode Remaining Time
sleepStartBrightnessNumber:DimensionlessSleep Mode Starting Brightness
sleepVolumeDimmerSleep Mode Volume
sceneVolumeDimmerScene Mode Volume
nightLightSwitchNight Light ModeThe lamp switches to night light mode (2200 K, 1%) when turned on between the start and end time.
nightStartHourNumberNight Light Start Hour
nightStartMinuteNumberNight Light Start Minute
nightEndHourNumberNight Light End Hour
nightEndMinuteNumberNight Light End Minute
wakeupAlarm1SwitchWake-up Alarm 1The alarms themselves are set in the Mi Home app.
wakeupAlarm2SwitchWake-up Alarm 2
wakeupAlarm3SwitchWake-up Alarm 3
sleepStateNumberSleep StateValue mapping ["-1"="Sleep Break","0"="Sleep End","1"="Sleep Start"]
wakeupStateNumberWake-up StateValue mapping ["-1"="Wake-up Break","0"="Wake-up End","1"="Wake-up Start"]
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down","cct-up"="Color Temperature Up","cct-down"="Color Temperature Down"]

Philips Zhirui Ceiling Lamp Living room 80W (philips.light.bceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceil1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceil2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceiling1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceiling2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips BlueSky Lamp (philips.light.blue) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["1"="Morning","2"="Noon","3"="Afternoon","4"="Sunset","5"="Evening","6"="Rainy"]
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch ScenesChanges the scene when the lamp is turned on again with the wall switch within 3 seconds after turning it off.
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as a JSON array of 3 scene numbers. The app writes them as 1,2,3.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips Blue Sky G2 (philips.light.blue1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["1"="Sunrise","2"="Noon","3"="Sunset","4"="Mid-night","5"="Custom"]
WallSceneEnSwitchWall Switch ScenesSwitches between the scenes Sunrise, Noon and Sunset when the wall switch is turned off and on within 3 seconds.
upLightModeSwitchUplight RGB ModeOn selects the RGB color (color set in the Mi Home app), Off selects white light.
upLightColorBrightnessDimmerUplight RGB Brightness
upLightCctNumber:TemperatureUplight Color Temperature
upLightWhiteBrightnessDimmerUplight White Brightness
downLightModeSwitchDownlight RGB ModeOn selects the RGB color (color set in the Mi Home app), Off selects white light.
downLightColorBrightnessDimmerDownlight RGB Brightness
downLightCctNumber:TemperatureDownlight Color Temperature
downLightWhiteBrightnessDimmerDownlight White Brightness
skyBrightnessDimmerSky Brightness
sunCctNumber:TemperatureSunlight Color Temperature
sunBrightnessDimmerSunlight Brightness
circadianRhythmSwitchCircadian RhythmSwitches the preset modes automatically during the day.
circadianRhythmTimesStringCircadian Rhythm TimesStart times of the circadian rhythm periods. Set them in the Mi Home app.
circadianAutoSwitchCircadian Rhythm Auto AdjustmentAdjusts the circadian rhythm times based on the location; the Mi Home app sends the phone location to the lamp.
sleepModeSwitchSleep ModeThe light dims down and turns off after the sleep mode time.
sleepTimeNumber:TimeSleep Mode Time
sleepRemainTimeNumber:TimeSleep Mode Remaining Time
sleepUnavailableSwitchSleep Mode Unavailable
nightLightSwitchNight LightThe lamp switches to the Mid-night mode when turned on between the start and end time.
nightStartTimeNumber:TimeNight Light Start TimeTime of day in minutes after midnight.
nightEndTimeNumber:TimeNight Light End TimeTime of day in minutes after midnight.
sunriseAlarm1SwitchSunrise Alarm 1The alarms themselves are set in the Mi Home app.
sunriseAlarm2SwitchSunrise Alarm 2
sunriseAlarm3SwitchSunrise Alarm 3
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips ZhiYi Ceiling lamp FL2 80W (philips.light.boc1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiYi Ceiling lamp FL2 40W (philips.light.boc2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiYi Ceiling lamp FL2 28W (philips.light.boc3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiRui E27 bulb (philips.light.bulb) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiRui E14 Candle Lamp Frosted version (philips.light.candle) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiRui E14 Candle Lamp Crystal version (philips.light.candle2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Mijia Philips Color Bulb (philips.light.cbulb) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
sceneNumberSceneValue mapping ["1"="Reading","2"="Warm","3"="Midnight","4"="Ambilight"]
cidNumberHue
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch

Philips Light (philips.light.cbulbs) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
sceneNumberSceneValue mapping ["1"="Reading","2"="Warm","3"="Midnight","4"="Ambilight"]
cidNumberHue
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch

Philips PingYi Ceiling Light 130W (philips.light.ce130c) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips YingLe Ceiling Light 130W (philips.light.ce130x) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips ZhiBai Ceiling Light 130W (philips.light.ce13zx) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips XingHuan Ceiling Light 36W (philips.light.ce36c) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips YingLe Ceiling Light 36W (philips.light.ce36x) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips XingHuan Ceiling Light 48W (philips.light.ce48c) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips ZhiBai Ceiling Light 48W (philips.light.ce48x) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips XingHuan Ceiling Light 80W (philips.light.ce80c) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips YingLe Ceiling Light 80W (philips.light.ce80yc) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Mi & Philips Ceiling Lamp Lamina 33W (philips.light.ceil33) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
flexSwitchSwitchFlex SwitchEnable only when the light is used with a Flex Switch (momentary wall switch).
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
mibandSleepSwitchMi Band Sleep Turn-offTurns the light off when the paired Mi Band detects sleep. Pair the band in the Mi Home app.
MibandStatusStringMi Band Status
nightLightSwitchSmart Midnight LightTurning the light on between 23:00 and 6:00 starts the Midnight scene.
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Smart Light (philips.light.ceilfi) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="Reading","2"="Leisure","3"="Night Light"]
defaultPowerOnStateNumberDefault Power On StateValue mapping ["0"="Default","1"="On"]
nightLightSwitchSwitchSmart Night LightDuring the set time period, turning the light on with the app starts the Night Light scene.
nightLightPeriodStringSmart Night Light Time PeriodFormat HH:MM:SS-HH:MM:SS, e.g. 22:00:00-06:00:00.
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips Connected Ceiling (philips.light.ceiling) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Mi & Philips Ceiling Lamp Lamina 80W (philips.light.ceilp) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
flexSwitchSwitchFlex SwitchEnable only when the light is used with a Flex Switch (momentary wall switch).
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
mibandSleepSwitchMi Band Sleep Turn-offTurns the light off when the paired Mi Band detects sleep. Pair the band in the Mi Home app.
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom S (philips.light.ceilz) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom L (philips.light.ceilz1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Jianyue G2 Living Room S (philips.light.ceilz2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Jianyue G2 Living Room L (philips.light.ceilz3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Light (philips.light.dcolor) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
sceneNumberSceneValue mapping ["1"="Reading","2"="Warm","3"="Midnight","4"="Ambilight"]
cidNumberHue
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch

ZhiRui Dimmable Downlight (philips.light.dlight) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiRui Downlight (philips.light.downlight) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips C9 Ceiling Light 120W (philips.light.eceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="TV","2"="Leisure","3"="Reading","4"="Energetic"]
flexSwitchSwitchMomentary Contact SwitchEnable only when the light is used with a momentary contact wall switch.
detectionSensitivityNumberFall Detection SensitivityValue mapping ["1"="Low","2"="High"]
fallConditionNumberFall StatusWhile a fall is reported the app blocks light control; reset it with the elderly-care-stop-alert action. Value mapping ["0"="Normal","1"="Fall"]
delayCallNumber:TimeFall Alert DelayNo alert is raised when the person gets up within this time.
fallAlertSwitchFall AlertCalls the emergency contact set in the Mi Home app when a fall is detected.
sensorStatusNumberSensor StatusValue mapping ["0"="Normal","1"="Polluted or Blocked"]
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene4StringWall Switch Scene 4Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
nightModeNumberSmart Night Light ModeIn Auto mode the night light turns on in the dark when a person is detected. Value mapping ["0"="Constant Off","1"="Constant On","2"="Auto"]
nightBrightnessNumber:DimensionlessNight Light BrightnessThe app uses 20, 40, 60, 80 and 100.
nightOnSwitchNight Light
changeSpeedEnableSwitchGradual Brightness Adjustment
changeSpeedNumberGradual Brightness Adjustment SpeedValue mapping ["0"="Slow","1"="Medium","2"="Fast"]
bedMonitoringSwitchBedtime MonitoringRaises an alert when a person stays in bed too long during the monitoring period.
bedMonitoringPeriodStringBedtime Monitoring PeriodFormat HH:MM-HH:MM, e.g. 22:00-07:00.
bedMonitoringAlertSwitchAbnormal Behavior AlertSends a Mi Home push notification on abnormal behavior.
bedDurationNumber:TimeBedtime Duration
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","elderly-care-stop-alert"="Reset Fall Alert"]

Philips C9 Ceiling Light 55W (philips.light.ecl01) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Manual","1"="TV","2"="Leisure","3"="Reading","4"="Energetic"]
flexSwitchSwitchMomentary Contact SwitchEnable only when the light is used with a momentary contact wall switch.
detectionSensitivityNumberFall Detection SensitivityValue mapping ["1"="Low","2"="High"]
fallConditionNumberFall StatusWhile a fall is reported the app blocks light control; reset it with the elderly-care-stop-alert action. Value mapping ["0"="Normal","1"="Fall"]
delayCallNumber:TimeFall Alert DelayNo alert is raised when the person gets up within this time.
fallAlertSwitchFall AlertCalls the emergency contact set in the Mi Home app when a fall is detected.
sensorStatusNumberSensor StatusValue mapping ["0"="Normal","1"="Polluted or Blocked"]
WallSceneEnSwitchWall Switch Scenes
wallScene1StringWall Switch Scene 1Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene2StringWall Switch Scene 2Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene3StringWall Switch Scene 3Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
wallScene4StringWall Switch Scene 4Format mode-brightness-colortemperature, e.g. 1-100-4000; mode 0 uses the given brightness and color temperature.
nightModeNumberSmart Night Light ModeIn Auto mode the night light turns on in the dark when a person is detected. Value mapping ["0"="Constant Off","1"="Constant On","2"="Auto"]
nightBrightnessNumber:DimensionlessNight Light BrightnessThe app uses 20, 40, 60, 80 and 100.
nightOnSwitchNight Light
changeSpeedEnableSwitchGradual Brightness Adjustment
changeSpeedNumberGradual Brightness Adjustment SpeedValue mapping ["0"="Slow","1"="Medium","2"="Fast"]
bedMonitoringSwitchBedtime MonitoringRaises an alert when a person stays in bed too long during the monitoring period.
bedMonitoringPeriodStringBedtime Monitoring PeriodFormat HH:MM-HH:MM, e.g. 22:00-07:00.
bedMonitoringAlertSwitchAbnormal Behavior AlertSends a Mi Home push notification on abnormal behavior.
bedDurationNumber:TimeBedtime Duration
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","elderly-care-stop-alert"="Reset Fall Alert"]

Philips C9 Panel Light 24W (philips.light.epan) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
modeNumberSceneValue mapping ["0"="Day Mode","1"="Night Mode"]
flexSwitchSwitchMomentary Contact SwitchEnable when the light is installed with a momentary contact (push button) wall switch.
fallAlertSwitchFall AlertCalls the emergency contact set in the Mi Home app when a fall is detected.
fallStatusNumberFall StatusValue mapping ["0"="Normal","1"="Fall Detected"]
fallAlertDelayNumber:TimeFall Alert DelayNo alert is sent when the person gets up within this time.
detectionSensitivityNumberFall Detection SensitivityValue mapping ["1"="Low","2"="High"]
sensorStatusNumberSensor StatusValue mapping ["0"="Normal","1"="Polluted or Obstructed"]
WallSceneEnSwitchWall Switch Scenes
WallScene1StringWall Switch Scene 1Set it in the Mi Home app. Format scene-brightness-color temperature.
WallScene2StringWall Switch Scene 2
autoOnOffSwitchAuto On/OffTurns the light on when someone is detected and off when nobody is detected.
autoOffDelayNumber:TimeAuto Off DelayTurns off after nobody is detected for this time.
autoOnDistanceNumberAuto On DistanceDistance in cm within which a person turns the light on.
autoOnAmbientBrightnessNumberAuto On Ambient BrightnessTurns on only when the ambient light is below this level. Value mapping ["0"="None","1"="Dark","2"="Dim","3"="Bright"]
nightLightSwitchAutomatic Night LightWithin the set time the light turns on when someone is detected and off when nobody is detected.
nightLightTimeStringAutomatic Night Light TimeTime period as HH:MM-HH:MM.
gradualAdjustSwitchGradual Brightness Adjustment
gradualSpeedNumberGradual Brightness SpeedValue mapping ["0"="Slow","1"="Fast"]
toiletMonitorSwitchToilet MonitoringAlerts when the bathroom is visited too often within the monitoring period.
toiletMonitorTimeStringToilet Monitoring TimeTime period as HH:MM-HH:MM.
toiletMonitorUsersNumberToilet Monitoring Users
toiletMonitorAlertSwitchToilet Monitoring Alert
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","stop-alert"="Reset Fall Alert"]

Philips F9 Lite Floor Light (philips.light.fl) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Desk Reading","2"="Screen Reading","3"="Focus Enhancement","4"="Creation and Invention","5"="Picture Books Reading"]
upOnSwitchUplight
upBrightnessDimmerUplight Brightness
downOnSwitchDownlight
downBrightnessDimmerDownlight Brightness
cctNumber:TemperatureColor Temperature
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
autoEnSwitchAuto Dimming
nightLightSwitchSmart Night LightThe lamp switches to night light mode when turned on between the start and end time.
nightStartTimeNumber:TimeNight Light Start TimeTime of day in minutes after midnight.
nightEndTimeNumber:TimeNight Light End TimeTime of day in minutes after midnight.
isNightSwitchNight Light Active
syncSunlightSwitchSync with SunlightFollows the color temperature of the sunlight. The Mi Home app sends the phone location to the lamp when this is enabled.
sunriseAlarmSwitchSunrise Alarm
sunriseAlarmSettingStringSunrise Alarm SettingRaw alarm setting as stored on the lamp. Set the alarm in the Mi Home app.
luxNumber:IlluminanceIlluminance
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips Zeeray Fall Detection Panel Light (philips.light.flat) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Bright","2"="Warm","3"="Night Light","4"="Custom"]
brightnessDimmerBrightness
customBrightnessDimmerCustom Scene BrightnessBrightness of the custom scene, setting it activates the custom scene.
nightLightSwitchNight Light PeriodThe light turns on in night light mode within the set time.
nightStartNumberNight Light StartMinutes after midnight.
nightEndNumberNight Light EndMinutes after midnight.
guardStatusNumberRoom StatusValue mapping ["0"="Room Free","1"="Room Occupied","2"="Prolonged Stay","3"="Someone Falls","4"="Device Error"]
activeEventNumberLast EventValue mapping ["0"="Enter","1"="Left","2"="Someone Falls","3"="Stand Up","4"="Device Error","5"="Device Back to Normal","6"="Prolonged Stay","7"="Prolonged Stay Cleared"]
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down","reset-guard-status"="Clear the Alert"]

Philips Wi-Fi bulb E27 White (philips.light.hbulb) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiYi Ceiling Lamp FL 40W (philips.light.lnblight1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiYi Ceiling Lamp FL 28W (philips.light.lnblight2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiYi Ceiling Lamp FL 80W (philips.light.lnlrlight) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips Zhirui Ceiling Lamp Living room 80W (philips.light.lrceiling) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips Zhirui Ceiling Lamp Liuying G2 Living Room L (philips.light.lying1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Liuying G2 Living Room S (philips.light.lying2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Liuying G2 Bedroom L (philips.light.lying3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Philips Zhirui Ceiling Lamp Liuying G2 Bedroom S (philips.light.lying4) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delayOffStringDelayed Turn-offSend the delay in seconds (0 cancels). The state shows start-seconds, the start as Unix timestamp and the delay in seconds.
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle","light-temperature-down"="Light Color Temperature Down","light-temperature-up"="Light Color Temperature Up"]

Zhirui Ceiling Lamp Nordic 80W (philips.light.mceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Nordic 40W (philips.light.mceilm) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Nordic 28W (philips.light.mceils) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Shadow 80W (philips.light.mm1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Shadow 40W (philips.light.mm2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Shadow 28W (philips.light.mm3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Smart Lamp (philips.light.mono1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
sceneNumberScene

Philips ZhiRui Bedside Lamp (philips.light.moonlight) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Forest Bathing","2"="Pink Romance","3"="Sunset Glow","4"="Ocean and Sky","5"="Screen Reading"]
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
mbSwitchAuto On/Off when Mi Band is Nearby
gonightSwitchMidnight Mode

Zhirui Ceiling Lamp Black 80W (philips.light.obceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Black 40W (philips.light.obceim) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Black 28W (philips.light.obceis) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Mijia Smart LED Ceiling Light Pro (Living Room) (philips.light.pceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Bright","2"="TV","3"="Warm","4"="Night Light"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
powerOnStateNumberPower-on StateValue mapping ["1"="Default","2"="On"]
workModeNumberLight Work ModeValue mapping ["1"="Multi Lighting","2"="Atmosphere"]
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
WallScene1StringWall Switch Scene 1Set it in the Mi Home app. Format work mode-brightness-color temperature, a brightness of 0 means the preset scene in the last field.
WallScene2StringWall Switch Scene 2
WallScene3StringWall Switch Scene 3
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down","cct-up"="Color Temperature Up","cct-down"="Color Temperature Down"]

Philips sustainable pendent light (philips.light.pceil1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
modeNumberSceneValue mapping ["0"="Custom","1"="Reading","2"="Lighting","3"="Leisure"]
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch ScenesOff: the wall switch only turns the light on and off.
WallScene1StringWall Switch Scene 1Set it in the Mi Home app. Format scene-brightness-color temperature, scene 0 is a custom brightness and color temperature.
WallScene2StringWall Switch Scene 2
WallScene3StringWall Switch Scene 3
autoCctSwitchCircadian LightAdjusts the color temperature to the time and season. The location is set by the Mi Home app when it is enabled there.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","toggle-light-mode"="Next Scene"]

Mijia Smart LED Ceiling Light Pro (Bedroom) (philips.light.pceilb) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Bright","2"="TV","3"="Warm","4"="Night Light"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
powerOnStateNumberPower-on StateValue mapping ["1"="Default","2"="On"]
workModeNumberLight Work ModeValue mapping ["1"="Multi Lighting","2"="Atmosphere"]
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
WallSceneEnSwitchWall Switch Scenes
WallScene1StringWall Switch Scene 1Set it in the Mi Home app. Format work mode-brightness-color temperature, a brightness of 0 means the preset scene in the last field.
WallScene2StringWall Switch Scene 2
WallScene3StringWall Switch Scene 3
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down","cct-up"="Color Temperature Up","cct-down"="Color Temperature Down"]

Mijia Smart Piano Light (philips.light.piano) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Focus","2"="Eye Protection"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delaySwitchDelayed Turn-offTurns off the light and the metronome after the delay time.
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
metronomeSwitchMetronome
metronomeBeatNumberMetronome Time SignatureValue mapping ["0"="-/4","1"="1/4","2"="2/4","3"="3/4","4"="4/4","5"="3/8","6"="6/8"]
metronomeBpmNumberMetronome Tempo
metronomeVolumeDimmerMetronome Volume
remoteLowBatterySwitchRemote Control Low Battery
seatAutoOnSwitchSit to Turn On Light
seatAutoOffSwitchLeave to Turn OffThe light and the metronome turn off when the seat has been left for the set time.
seatAwayTimeNumber:TimeTime After Leaving Seat
autoSensitivityNumberSeat Detection SensitivityValue mapping ["0"="High","1"="Medium","2"="Low"]
tuningReminderSwitchTuning ReminderThe Mi Home app sends a tuning reminder six months after the last tuning date.
lastTuningDateStringLast Tuning Date
tuningReminderExpiredSwitchTuning Reminder Expired
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down","cct-up"="Color Temperature Up","cct-down"="Color Temperature Down"]

Mijia Philips Study Desk Lamp (philips.light.rwread) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
sceneNumberSceneValue mapping ["1"="Teens Study","2"="Screen Reading","3"="Concentration","4"="AA Grade Illuminance"]
flmSwitchFollow MeTurns the lamp on automatically based on ambient light and desk vibration
flmvNumberFollow Me SensitivityValue mapping ["2"="Low","3"="High"]
chlSwitchChild Lock
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Zhirui Ceiling Lamp Starry 80W (philips.light.sceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Starry 40W (philips.light.sceilm) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Starry 28W (philips.light.sceils) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips EyeCare Connected Desk Lamp gen2. (philips.light.sread1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
sceneNumberSceneValue mapping ["1"="Teens Study","2"="Adults Reading","3"="Phone / Computer"]
ambientPowerSwitchAmbient Power
ambientBrightnessNumberAmbient Brightness
eyecareSwitchEyecare
notifyuserSwitchEye Fatigue Reminder
blSwitchNight Light
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Mijia Philips Desk Lamp 2S (philips.light.sread2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
sceneNumberSceneValue mapping ["1"="Teens Study","2"="Adults Reading","3"="Phone / Computer"]
ambientPowerSwitchAmbient Power
ambientBrightnessNumberAmbient Brightness
eyecareSwitchEyecare
notifyuserSwitchEye Fatigue Reminder
blSwitchNight Light
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Mijia Philips Desk Lamp 3 (philips.light.sread3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Custom","1"="Child Mode","2"="Adult Reading","3"="Mobile Phone/Computer"]
brightnessDimmerBrightness
dvNumber:TimeDelayed Turn-off
eyecareSwitchEye Protection ModeEye protection mode; the scene (mode) is only applied while eye protection is on.
notifyUserSwitchEye Strain Notification
notifyTimeNumber:TimeEye Strain Notification Interval
lastDvNumber:TimeLast Delayed Turn-off TimeLast delayed turn-off time set on the lamp; the Mi Home app uses it as default in its delay picker.
nightLightSwitchNight Light
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

ZhiRui read & write Desk Lamp Wi-Fi (philips.light.sread4) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Custom","1"="AA Level","2"="Adult Reading","3"="Child Mode","4"="Mobile Phone/Computer"]
brightnessDimmerBrightness
dvNumber:TimeDelayed Turn-off
notifyUserSwitchEye Strain Notification
notifyTimeNumber:TimeEye Strain Notification Interval
lastDvNumber:TimeLast Delayed Turn-off TimeLast delayed turn-off time set on the lamp; the Mi Home app uses it as default in its delay picker.
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Desk Lamp 2S (philips.light.sread6) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Custom","1"="Child Mode","2"="Adult Reading","3"="Mobile Phone/Computer"]
brightnessDimmerBrightness
dvNumber:TimeDelayed Turn-off
nightLightSwitchNight Light
notifyUserSwitchEye Strain NotificationBlinks the lamp every 40 minutes as a reminder to rest the eyes.
eyecareSwitchEye Protection ModeEye protection mode; the scene (mode) is only applied while eye protection is on.
ambientPowerSwitchAmbient Light
ambientBrightnessDimmerAmbient Light BrightnessContrast between the main light and the ambient light.
lastDvNumber:TimeLast Delayed Turn-off TimeLast delayed turn-off time set on the lamp; the Mi Home app uses it as default in its delay picker.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Philips Zhixiu Desk Lamp (philips.light.sread8) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Custom","1"="Child Mode","2"="Adult Reading","3"="Mobile Phone/Computer"]
brightnessDimmerBrightness
dvNumber:TimeDelayed Turn-off
nightLightSwitchNight Light
notifyUserSwitchEye Strain NotificationBlinks the lamp every 40 minutes as a reminder to rest the eyes.
eyecareSwitchEye Protection ModeEye protection mode; the scene (mode) is only applied while eye protection is on.
ambientPowerSwitchAmbient Light
ambientBrightnessDimmerAmbient Light BrightnessContrast between the main light and the ambient light.
lastDvNumber:TimeLast Delayed Turn-off TimeLast delayed turn-off time set on the lamp; the Mi Home app uses it as default in its delay picker.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

Mijia Smart LED Desk Lamp Pro (Reading Version) (philips.light.sread9) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Office","2"="Reading","3"="Baby","4"="Warmth"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
notifyUserSwitchEye Strain Notification
notifyTimeNumber:TimeEye Strain Notification Interval
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down","cct-up"="Color Temperature Up","cct-down"="Color Temperature Down"]

Philips F9 Floor Light (philips.light.street) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="None","1"="Desk Reading","2"="Screen Reading","3"="Focus Enhancement","4"="Creation and Invention","5"="Picture Books Reading"]
upOnSwitchUplight
upBrightnessDimmerUplight Brightness
downOnSwitchDownlight
downBrightnessDimmerDownlight Brightness
cctNumber:TemperatureColor Temperature
delaySwitchDelayed Turn-off
delayTimeNumber:TimeDelayed Turn-off Time
delayRemainTimeNumber:TimeDelayed Turn-off Remaining Time
autoEnSwitchAuto Detection
nightLightSwitchSmart Night LightThe lamp switches to night light mode when turned on between the start and end time.
nightStartTimeNumber:TimeNight Light Start TimeTime of day in minutes after midnight.
nightEndTimeNumber:TimeNight Light End TimeTime of day in minutes after midnight.
isNightSwitchNight Light Active
syncSunlightSwitchSync with SunlightFollows the color temperature of the sunlight. The Mi Home app sends the phone location to the lamp when this is enabled.
sunriseAlarmSwitchSunrise Alarm
sunriseAlarmSettingStringSunrise Alarm SettingRaw alarm setting as stored on the lamp. Set the alarm in the Mi Home app.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle"]

ZhiRui RGB strip (philips.light.strip2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Passion Party","2"="Romantic Time","3"="Bright","4"="Warm"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
colorColorColorRGB color of the light. The brightness part of a color command scales the RGB value, use the brightness channel to dim the light.
colorModeNumberColor ModeValue mapping ["0"="White","1"="Color"]
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [3,scene,color mode,brightness,color temperature or RGB,...]: a fixed scene is scene,0,0,0, a custom scene is 0,color mode,brightness,color temperature or RGB.
actionsStringActionsValue mapping ["brightness-down"="Brightness Down","brightness-up"="Brightness Up","toggle"="Toggle","temperature-down"="Color Temperature Down","temperature-up"="Color Temperature Up"]

Xiaomi Smart Lightstrip Pro (philips.light.strip3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberScene0 is the color set with the color channel or a custom mode selected with the custom mode channel. Value mapping ["0"="Custom","1"="Feeling of Love","2"="Cozy Bonfire","3"="Northern European Aurora","4"="Beach Walk","5"="Dreamlike Colors","6"="Midsummer","7"="Rapid Changes","8"="Seasons"]
brightnessDimmerBrightness
colorColorColorRGB color of the light. The brightness part of a color command scales the RGB value, use the brightness channel to dim the light.
musicSyncSwitchMusic SyncInteraction of light and sound.
tvSyncSwitchTV SyncThe color follows the picture of a connected Xiaomi TV. The Mi Home app of the strip5 and of strip3 with firmware up to 2.1.8_0026 does not offer to switch it.
tvConnectedSwitchTV Connected
dvNumber:TimeDelayed Turn-off
rhythmColorStringMusic Sync ColorsCustom colors are shown as a #RRGGBB value. Value mapping ["A"="Rainbow","B"="Passion","C"="Freshness","D"="Sunshine","E"="Romance"]
rhythmSensitivityNumberMusic Sync SensitivityValue mapping ["0"="Gentle","1"="Lyric","2"="Dynamic"]
rhythmAnimationNumberMusic Sync EffectValue mapping ["0"="Breathing","1"="Flashing","2"="Random","3"="Blooming"]
diyIdNumberCustom ModeNumber of a custom mode created in the Mi Home app, 0 when no custom mode is active.
stripLengthNumberStrip Length
controlSceneStringControl Box ModesThe 3 modes the mode button of the control box cycles through, as a JSON array, e.g. [1,2,3]. 1-8 are the scenes of the scene channel, 100 + n is custom mode n.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down"]

Xiaomi Smart Lightstrip Pro (philips.light.strip5) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberScene0 is the color set with the color channel or a custom mode selected with the custom mode channel. Value mapping ["0"="Custom","1"="Feeling of Love","2"="Cozy Bonfire","3"="Northern European Aurora","4"="Beach Walk","5"="Dreamlike Colors","6"="Midsummer","7"="Rapid Changes","8"="Seasons"]
brightnessDimmerBrightness
colorColorColorRGB color of the light. The brightness part of a color command scales the RGB value, use the brightness channel to dim the light.
musicSyncSwitchMusic SyncInteraction of light and sound.
tvSyncSwitchTV SyncThe color follows the picture of a connected Xiaomi TV. The Mi Home app of the strip5 and of strip3 with firmware up to 2.1.8_0026 does not offer to switch it.
tvConnectedSwitchTV Connected
dvNumber:TimeDelayed Turn-off
rhythmColorStringMusic Sync ColorsCustom colors are shown as a #RRGGBB value. Value mapping ["A"="Rainbow","B"="Passion","C"="Freshness","D"="Sunshine","E"="Romance"]
rhythmSensitivityNumberMusic Sync SensitivityValue mapping ["0"="Gentle","1"="Lyric","2"="Dynamic"]
rhythmAnimationNumberMusic Sync EffectValue mapping ["0"="Breathing","1"="Flashing","2"="Random","3"="Blooming"]
diyIdNumberCustom ModeNumber of a custom mode created in the Mi Home app, 0 when no custom mode is active.
stripLengthNumberStrip Length
controlSceneStringControl Box ModesThe 3 modes the mode button of the control box cycles through, as a JSON array, e.g. [1,2,3]. 1-8 are the scenes of the scene channel, 100 + n is custom mode n.
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","brightness-up"="Brightness Up","brightness-down"="Brightness Down"]

Philips Connected Lights (philips.light.virtual) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Zhirui Ceiling Lamp Gorgeous 80W (philips.light.xzceil) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Gorgeous 40W (philips.light.xzceim) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Zhirui Ceiling Lamp Gorgeous 28W (philips.light.xzceis) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Halo 80W (philips.light.yb1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Halo 40W (philips.light.yb2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips Zhirui Ceiling Lamp Halo 28W (philips.light.yb3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberSceneValue mapping ["0"="Manual","1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
brightnessDimmerBrightness
cctNumber:TemperatureColor Temperature
dvNumber:TimeDelayed Turn-off
WallSceneEnSwitchWall Switch Scenes
WallSceneStringWall Switch Scene ListThe 3 scenes the wall switch cycles through, as [[0,scene],[brightness,color temperature],...].
dimmingPeriodNumberDimming Period
autoCctStringAutomatic Color TemperatureFollows the time of day. Value mapping ["true"="On","false"="Off"]
MibandStatusStringMi Band Status
actionsStringActionsValue mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

Philips ZhiYi Ceiling lamp (philips.light.zyceiling) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiYi Desk Lamp (philips.light.zysread) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
sceneNumberSceneValue mapping ["1"="Teens Study","2"="Adults Reading","3"="Phone / Computer"]
ambientPowerSwitchAmbient Power
ambientBrightnessNumberAmbient Brightness
eyecareSwitchEyecare
notifyuserSwitchEye Fatigue Reminder
blSwitchNight Light
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Philips ZhiYi Strip (philips.light.zystrip) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
cctDimmerCorrelated Color Temperature
sceneNumberSceneValue mapping ["1"="Bright","2"="TV","3"="Warm","4"="Midnight"]
dvNumber:TimeDelay Off Countdown
blSwitchSmart Midnight Light
msSwitchAuto Power Off when Asleep (Mi Band)
acSwitchAuto Color Temperature
mbSwitchAuto On/Off when Mi Band is Nearby
switch_enSwitchWall Switch ScenesEnables switching between scenes with the wall switch
delayoffNumber:TimeDelay OffTurns the light off after the set time, 0 cancels the timer

Xiaomi Smart Plug 2 (qmi.plug.tw02) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["switch-toggle"="Toggle"]
powerSwitchPower
ledSwitchIndicator Light
power_consumptionNumber:EnergyEnergy Consumption
electric_powerNumber:PowerActive Power
physical_controls_lockedSwitchChild Lock
loop_taskSwitchLoop TaskWhen on, the plug switches itself on and off by the set durations. Set Loop On Duration and Loop Off Duration first.
on_durationNumber:TimeLoop On Duration
off_durationNumber:TimeLoop Off Duration
countdown_enableSwitchCountdown
countdown_timeNumber:TimeCountdown Time
countdown_remaining_timeNumber:TimeCountdown Remaining Time
countdown_end_stateSwitchCountdown End StatePower state set when the countdown ends.
charging_protectionSwitchCharging ProtectionWhen on, the plug switches itself off when the power stays below Charging Protection Threshold for Charging Protection Duration.
charging_protection_powerNumber:PowerCharging Protection Threshold
charging_protection_timeNumber:TimeCharging Protection Duration

CHINGMI Smart Power Strip v1 (qmi.powerstrip.v1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["normal"="Normal","green"="Power Saving"]
electric_powerNumber:PowerActive Power
voltageNumber:ElectricPotentialVoltage
power_factorNumber:DimensionlessPower Factor
electric_currentNumber:ElectricCurrentCurrent
leakage_currentNumber:ElectricCurrentLeakage Current
temperatureNumber:TemperatureTemperature

ROIDMI EVE (roidmi.vacuum.r1b) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["sweep-start-sweep"="Start Cleaning","custom-pause"="Pause","custom-continue-sweep"="Resume Cleaning","vacuum-stop-sweeping"="Stop Cleaning","battery-start-charge"="Return to Dock","custom-pause-find-charge"="Pause Returning to Dock","custom-continue-find-charge"="Resume Returning to Dock","custom-stop-find-charge"="Stop Returning to Dock","custom-start-dust"="Empty Dust Box","custom-find-robot"="Locate Robot","filter-reset-filter-life"="Reset Filter Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","brush-cleaner-reset-brush-life2"="Reset Sensor Life","vacuum-start-sweep"="Start Cleaning (Direct Command)"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sleeping","2"="Standby","3"="Paused","4"="Cleaning","5"="Returning to Dock","6"="Charging","7"="Error","8"="Remote Control","9"="Fully Charged","10"="Shut Down","11"="Returning to Dock Paused"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Low Battery, Returning to Dock","2"="Low Battery, Shutting Down","3"="Main Wheel Stuck","4"="Bumper Jammed","5"="Robot Tilted","6"="Lidar Blocked or Jammed","7"="Front Collision Sensor Error","8"="Right Wall Sensor Error","9"="Main Brush Entangled or Jammed","10"="Side Brush Entangled or Jammed","11"="Fan Error","12"="Lidar Cover Jammed","13"="Dust Box and Filter Dirty or Missing","14"="Dust Box Removed","15"="Clean Dust Box and Filter","16"="Robot Trapped","17"="Robot Lifted","18"="Water Tank Removed","19"="Water Tank Low","20"="Target Area Unreachable","21"="Started in Restricted Area","22"="Started near Cliff","23"="Water Pump Current Error","24"="Dock Not Found","25"="Lidar Speed Error","27"="Lidar Jammed","30"="Lidar Open Circuit","31"="Battery Error","32"="Main Brush Error","33"="Main Wheel Error","34"="Side Brush Error","35"="Fan Error (Code 35)","36"="Water Pump Error","37"="Firmware Update Failed"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["0"="Off (Mop Only)","1"="Quiet","2"="Standard","3"="Power","4"="Max"]
sweep_typeNumberRobot Cleaner - Cleaning TypeNot offered by the Mi Home app for this model. Value mapping ["0"="Vacuum","1"="Mop","2"="Vacuum and Mop"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
volumeNumber:DimensionlessSpeaker - Volume
muteSwitchSpeaker - Mute
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
brush_left_timeNumber:TimeMain Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
brush_left_time1Number:TimeSide Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Brush - Brush Life Level
brush_left_time2Number:TimeSensor - Sensor Left Time
brush_life_level2Number:DimensionlessSensor - Sensor Life Level
mopSwitchCustom - Mop Installed
work_station_freqNumberCustom - Dust Collection FrequencyValue mapping ["0"="Never","1"="After Every Cleaning","2"="After 2 Cleanings","3"="After 3 Cleanings"]
timingStringCustom - Scheduled Cleaning
clean_areaNumber:AreaCustom - Cleaning Area
auto_boostSwitchCustom - Carpet Boost
forbid_modeStringCustom - Do Not DisturbJSON text as used by the app: {"time":[start,end,enabled],"tz":offset,"tzs":offset}, start and end in seconds after midnight, enabled 1 or 0
water_levelNumberCustom - Mop Water LevelValue mapping ["0"="Off (Vacuum Only)","1"="Small","2"="Medium","3"="Max"]
total_clean_timeNumber:TimeCustom - Total Cleaning Time
total_clean_areasNumber:AreaCustom - Total Cleaning Area
clean_countsNumberCustom - Total Cleaning Count
clean_timeNumber:TimeCustom - Cleaning Time
double_cleanSwitchCustom - Clean Twice
edge_sweepSwitchCustom - Edge CleaningNot offered by the Mi Home app
led_switchSwitchCustom - Indicator Light Always On
lidar_collisionSwitchCustom - Lidar Priority
station_keySwitchCustom - Dust Station Touch Control
station_ledSwitchCustom - Dust Station Display
current_audioStringCustom - Voice Pack
station_typeNumberCustom - Dock TypeValue mapping ["101"="Charging Dock","102"="Dust Collection Station"]
map_memorySwitchMap - Map SavingRead only: not offered by the Mi Home app; turning it off may discard the saved map
use_auto_areaSwitchMap - Custom Room Settings
path_typeNumberMap - Mop RouteValue mapping ["0"="Standard","1"="Y-Path"]
sweep_modeNumberSweep - Cleaning TaskValue mapping ["0"="Idle","1"="Whole Map","2"="Zone","3"="Current Spot","4"="Spot","7"="Smart","8"="Smart Zone","9"="Deep Whole Map","10"="Along the Wall"]

ROIDMI EVE MAX (roidmi.vacuum.sdj60) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["sweep-start-sweep"="Start Cleaning","custom-pause"="Pause","custom-continue-sweep"="Resume Cleaning","vacuum-stop-sweeping"="Stop Cleaning","battery-start-charge"="Return to Dock","custom-pause-find-charge"="Pause Returning to Dock","custom-continue-find-charge"="Resume Returning to Dock","custom-start-dust"="Empty Dust Box","custom-find-robot"="Locate Robot","filter-reset-filter-life"="Reset Filter Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life2"="Reset Parts Cleaning Reminder","vacuum-start-sweep"="Start Cleaning (Direct Command)","vacuum-pause-sweeping"="Pause (Direct Command)","vacuum-start-dust-arrest"="Empty Dust Box (Direct Command)"]
statusNumberRobot Cleaner - StatusValue mapping ["0"="Standby","1"="Cleaning","2"="Returning to Dock","3"="Remote Control","4"="Error","5"="Building Map","8"="Sleeping","9"="Shut Down","10"="Paused","20"="Returning to Dock Paused","21"="Charging","22"="Fully Charged"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Replace the Dust Box","2"="Water Tank Low","3"="Main Brush Stuck","4"="Side Brush Stuck","5"="Main Wheel Stuck","6"="Bumper Stuck","7"="Lidar Cover Pressure Sensor Error","8"="Lidar Error","9"="Clean Right Wall Sensor","10"="Clean Front Collision Sensor","11"="Clean Cliff Sensors","12"="Robot Trapped","13"="Started near Cliff","14"="Robot Lifted","15"="Target Area Unreachable","16"="Robot Trapped (Code 16)","17"="Battery Error","18"="Fan Error","19"="Main Brush Error","20"="Side Brush Error","21"="Main Wheel Error","22"="Water Pump Error","23"="Water Pump Current Error","24"="Lidar Error (Code 24)","25"="Mop Motor Error","26"="Ultrasonic Sensor Error","27"="Dust Bag Not in Place","28"="Dust Station Fan Error","29"="Dust Station Not Found","30"="Mop Module Error","31"="Robot Stuck","33"="Left Wheel Overcurrent","34"="Right Wheel Overcurrent","35"="Both Wheels Overcurrent","36"="Left Front Bumper Stuck","37"="Right Front Bumper Stuck","38"="Motion Sensor Error","39"="Robot Tilted","40"="Communication Error","41"="Mop Not in Place","42"="Returning to Dock Failed","43"="Dust Bag Full"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["0"="Off (Mop Only)","1"="Quiet","2"="Standard","3"="Power","4"="Max"]
battery_levelNumber:DimensionlessBattery - Battery Level
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_life_timeNumber:TimeMop - Mop Left Time
volumeNumberSpeaker - Volume
brush_left_timeNumber:TimeMain Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
brush_left_time1Number:TimeSide Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
component_left_timeNumber:TimeParts Cleaning - Left Time
component_life_levelNumber:DimensionlessParts Cleaning - Life Level
sweep_modeNumberSweep - Cleaning TaskValue mapping ["0"="Idle","1"="Whole Map","2"="Room","3"="Zone","4"="Spot","5"="Custom"]
mopSwitchCustom - Mop Installed
work_station_freqNumberCustom - Dust Collection FrequencyValue mapping ["0"="Never","1"="After Every Cleaning","2"="After 2 Cleanings","3"="After 3 Cleanings"]
timingStringCustom - Scheduled Cleaning
clean_areaNumber:AreaCustom - Cleaning Area
rug_avoidNumberCustom - Carpet CleaningValue mapping ["0"="Ignore Carpet","1"="Avoid Carpet","2"="Adaptive Short-Pile Carpet"]
lidar_collisionSwitchCustom - Active Obstacle Avoidance
auto_boostSwitchCustom - Carpet Boost
forbid_modeStringCustom - Do Not DisturbJSON text as used by the app: [start,end,enabled], start and end in seconds after midnight, enabled 1 or 0
water_levelNumberCustom - Mop Water LevelValue mapping ["0"="Off (Vacuum Only)","5"="Small","7"="Medium","10"="Max"]
clean_countsNumberCustom - Total Cleaning Count
total_clean_timeNumber:TimeCustom - Total Cleaning Time
total_clean_areasNumber:AreaCustom - Total Cleaning Area
clean_timeNumber:TimeCustom - Cleaning Time
double_cleanSwitchCustom - Clean Twice
station_keySwitchCustom - Dust Station Touch Control
station_ledSwitchCustom - Dust Station Display
led_switchSwitchCustom - Indicator Light Always On
current_audioStringCustom - Voice Pack
child_lockSwitchCustom - Child Lock
path_typeNumberCustom - Mop RouteNot offered by the Mi Home app for this model. Value mapping ["0"="Standard","1"="Y-Path"]
wifi_rssiNumberCustom - WiFi Signal Strength
forbid_stateSwitchCustom - Do Not Disturb Active
bump_stateSwitchCustom - Black Carpet BoostRead only: the Mi Home app warns not to enable it in homes with steps or stairs

ROIDMI EVE vacuum (roidmi.vacuum.v60) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["sweep-start-sweep"="Start Cleaning","custom-pause"="Pause","custom-continue-sweep"="Resume Cleaning","vacuum-stop-sweeping"="Stop Cleaning","battery-start-charge"="Return to Dock","custom-pause-find-charge"="Pause Returning to Dock","custom-continue-find-charge"="Resume Returning to Dock","custom-stop-find-charge"="Stop Returning to Dock","custom-start-dust"="Empty Dust Box","custom-find-robot"="Locate Robot","filter-reset-filter-life"="Reset Filter Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","brush-cleaner-reset-brush-life2"="Reset Sensor Life","vacuum-start-sweep"="Start Cleaning (Direct Command)"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sleeping","2"="Standby","3"="Paused","4"="Cleaning","5"="Returning to Dock","6"="Charging","7"="Error","8"="Remote Control","9"="Fully Charged","10"="Shut Down","11"="Returning to Dock Paused"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Low Battery, Returning to Dock","2"="Low Battery, Shutting Down","3"="Main Wheel Stuck","4"="Bumper Jammed","5"="Robot Tilted","6"="Lidar Blocked or Jammed","7"="Front Collision Sensor Error","8"="Right Wall Sensor Error","9"="Main Brush Entangled or Jammed","10"="Side Brush Entangled or Jammed","11"="Fan Error","12"="Lidar Cover Jammed","13"="Dust Box and Filter Dirty or Missing","14"="Dust Box Removed","15"="Clean Dust Box and Filter","16"="Robot Trapped","17"="Robot Lifted","18"="Water Tank Removed","19"="Water Tank Low","20"="Target Area Unreachable","21"="Started in Restricted Area","22"="Started near Cliff","23"="Water Pump Current Error","24"="Dock Not Found","25"="Lidar Speed Error","27"="Lidar Jammed","30"="Lidar Open Circuit","31"="Battery Error","32"="Main Brush Error","33"="Main Wheel Error","34"="Side Brush Error","35"="Fan Error (Code 35)","36"="Water Pump Error","37"="Firmware Update Failed"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["0"="Off (Mop Only)","1"="Quiet","2"="Standard","3"="Power","4"="Max"]
sweep_typeNumberRobot Cleaner - Cleaning TypeNot offered by the Mi Home app for this model. Value mapping ["0"="Vacuum","1"="Mop","2"="Vacuum and Mop"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
volumeNumber:DimensionlessSpeaker - Volume
muteSwitchSpeaker - Mute
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
brush_left_timeNumber:TimeMain Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
brush_left_time1Number:TimeSide Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Brush - Brush Life Level
brush_left_time2Number:TimeSensor - Sensor Left Time
brush_life_level2Number:DimensionlessSensor - Sensor Life Level
mopSwitchCustom - Mop Installed
work_station_freqNumberCustom - Dust Collection FrequencyValue mapping ["0"="Never","1"="After Every Cleaning","2"="After 2 Cleanings","3"="After 3 Cleanings"]
timingStringCustom - Scheduled Cleaning
clean_areaNumber:AreaCustom - Cleaning Area
auto_boostSwitchCustom - Carpet Boost
forbid_modeStringCustom - Do Not DisturbJSON text as used by the app: {"time":[start,end,enabled],"tz":offset,"tzs":offset}, start and end in seconds after midnight, enabled 1 or 0
water_levelNumberCustom - Mop Water LevelValue mapping ["0"="Off (Vacuum Only)","1"="Small","2"="Medium","3"="Max"]
total_clean_timeNumber:TimeCustom - Total Cleaning Time
total_clean_areasNumber:AreaCustom - Total Cleaning Area
clean_countsNumberCustom - Total Cleaning Count
clean_timeNumber:TimeCustom - Cleaning Time
double_cleanSwitchCustom - Clean Twice
edge_sweepSwitchCustom - Edge CleaningNot offered by the Mi Home app
led_switchSwitchCustom - Indicator Light Always On
lidar_collisionSwitchCustom - Lidar Priority
station_keySwitchCustom - Dust Station Touch Control
station_ledSwitchCustom - Dust Station Display
current_audioStringCustom - Voice Pack
station_typeNumberCustom - Dock TypeValue mapping ["101"="Charging Dock","102"="Dust Collection Station"]
map_memorySwitchMap - Map SavingRead only: not offered by the Mi Home app; turning it off may discard the saved map
use_auto_areaSwitchMap - Custom Room Settings
path_typeNumberMap - Mop RouteValue mapping ["0"="Standard","1"="Y-Path"]
sweep_modeNumberSweep - Cleaning TaskValue mapping ["0"="Idle","1"="Whole Map","2"="Zone","3"="Current Spot","4"="Spot","7"="Smart","8"="Smart Zone","9"="Deep Whole Map","10"="Along the Wall"]

ROIDMI EVE CC (roidmi.vacuum.v62) Channels ​

ChannelTypeDescriptionComment
actionsStringRobot Cleaner - ActionsValue mapping ["vacuum-start-sweep"="Start","vacuum-pause-sweeping"="Pause","vacuum-direct-stop-sweeping"="Stop","vacuum-start-edge-sweep"="Start Edge Cleaning","vacuum-pause-edge-sweeping"="Pause Edge Cleaning","vacuum-dock"="Return to Dock","vacuum-stop-charging"="Stop Returning to Dock","filter-reset-filter-life"="Reset Filter Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","mop-reset-mop-life"="Reset Mop Life","vacuum-set-calibration"="Calibrate","vacuum-direct-start-sweep"="Start (Direct Command)","vacuum-direct-start-only-sweep"="Start Vacuum Only (Direct Command)","vacuum-direct-start-sweep-mop"="Start Vacuum and Mop (Direct Command)","vacuum-direct-start-only-mop"="Start Mop Only (Direct Command)","battery-direct-start-charge"="Return to Dock (Direct Command)"]
clean_roomsStringRobot Cleaner - Clean RoomsStarts cleaning the rooms with the given comma separated room ids, for example 10,11.
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to Dock","4"="Charging","5"="Cleaning","6"="Vacuuming and Mopping","7"="Mopping","8"="Updating","9"="Washing Mop","10"="Drying Mop","11"="Collecting Dust","12"="Building Map"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Dust box removed","2"="Insufficient water, please add water","3"="Please check if the main brush is stuck","4"="Please check if the side brush is stuck","5"="Please check if the main wheel is stuck","6"="Please check if the bumper is stuck","7"="Please check if the top radar cover is stuck","8"="Please check if the radar is blocked or stuck","9"="Please wipe the right side wall sensor","10"="Please wipe the front collision sensor","11"="Please wipe the cliff sensor and activate away from the danger zone","12"="The machine is trapped, please move the location and start it","13"="Start after moving away from the cliff","14"="Off the ground, please put it back on the ground to start","15"="The specified area cannot be reached","16"="Please move out of the restricted area before restarting","17"="Battery error","18"="Fan error","19"="Main brush exception","20"="Side brush exception","21"="Main wheel exception","22"="Pump open abnormal","23"="Abnormal pump current","24"="Radar open circuit exception","25"="Mopping Motor Abnormal","26"="Ultrasonic Sensor Abnormal","27"="Dust bag not in place","28"="Dust station fan is abnormal","29"="Failed to recharge, no charging point found","30"="Please check if the mop component is stuck","31"="Please remove the carpet before restarting","38"="IMU data exception","39"="Please place the machine on the ground to start","40"="Abnormal machine (program and chassis) communication","41"="The mop is not in place","500"="Radar Timeout","501"="Robot Wheels Up","502"="Battery is too low","503"="Please confirm the dust box is installed","507"="Relocation failed","508"="Please place the host on a level ground to start","509"="Please wipe the cliff sensor and move to a new location to start","510"="Please check and remove foreign objects from the collision sensor","511"="Recharge failed","512"="Breakpoint recharge failed","513"="Navigation failed","514"="Failed to escape","517"="Device upgrade","518"="Low battery","521"="The battery is low, please make sure the water tank is installed","522"="Please confirm that the mop is installed","525"="The water tank is empty","527"="Please remove the mop","528"="Please remove the water tank and mop","529"="Please make sure the water tank and mop are installed","530"="Please confirm that the two-in-one water tank and mop have been installed","531"="Please confirm that the water tank is installed","532"="Charging, please remove the mop and water tank","533"="Host standby time is too long, shut down","534"="Host battery is low, shut down","535"="Start Charging","536"="Start Charging (Code 536)","540"="Please confirm that the two-in-one water tank has been installed","541"="Start charging (Code 541)","542"="Start charging (Code 542)","550"="The battery temperature is abnormal","551"="Battery temperature returned to normal","559"="Failed to build a map","560"="The side brush is abnormal","561"="Please confirm that the visual recognition sensor is not blocked","562"="The edge infrared sensor is abnormal","563"="The dust box fell off","564"="The two-in-one water tank has fallen off","565"="Radar Obstruction","566"="The water tank has fallen off","567"="Please move the sweeper out of the restricted area and start it again","568"="The left wheel is abnormal","569"="The right wheel is abnormal","570"="The main brush is abnormal","571"="The cutting blade is abnormal","572"="Please move the sweeper out of the restricted area and start it again (Code 572)","573"="Fan Abnormal","574"="Radar is tangled or stuck","580"="There is no water in the map building mode","581"="Detected that there is no water in the clean water tank","582"="Sewage tank full detected","583"="Clear water tank not installed","584"="No sewage tank installed","585"="Sewage network not installed","586"="The sinkhole is full","587"="The connection between the host and the cleaning station is abnormal","588"="The robot may be on the carpet","589"="Machine positioning failed exception","590"="Please confirm that the top cover of the dust collection seat is closed and the dust bag is installed","591"="The dust bag is full","592"="Dust Collection Abnormal","593"="Dust Collection Abnormal (Code 593)","594"="Dust Collection Abnormal (Code 594)","595"="Dust Collection Abnormal (Code 595)","596"="Dust Collection Abnormal (Code 596)","597"="Air channel switching timed out","598"="Charging Overcurrent","599"="Failed to collect dust","600"="HEPA dust collection failed","601"="Dust Collection Abnormal (Code 601)","602"="Dust Collection Abnormal (Code 602)","603"="Dust Box Abnormal","604"="Dust Collection Abnormal (Code 604)","605"="There is less water in the water tank","611"="Location failed","612"="The map has changed, positioning failed","613"="The base station is powered off, and the sewage collection has not been completed","614"="The base station is powered off and has not finished drying","615"="The base station is powered off and the water change has not been completed","616"="The base station is powered off and the dust collection has not been completed","617"="The sewage tank and clean water tank of the base station are both full, please pour out part of the clean water tank","618"="Please confirm that the cleaning fluid box is installed","619"="The cleaning fluid box has been removed","620"="Please confirm that the cleaning solution is not empty","621"="The communication between the robot and the base station is abnormal, please power off and restart the base station and try again","622"="The communication between the robot and the base station is abnormal, please power off and restart the base station","623"="The communication between the robot and the base station is abnormal. The scheduled task failed to start. Please power off and restart the base station","624"="The stirring motor of the sewage tank is running abnormally, please contact customer service to solve it","625"="Washing bracket not installed","626"="Waiting for the sewage to be converted into clean water","627"="Please move the host back to the base station and try again","628"="The base station has been powered off","629"="The mop fell off","630"="The left and right mops are entangled or stuck","2000"="Dust full reminder","2001"="Left swipe stuck","2002"="Right swipe stuck","2003"="Low battery reservation failed","2004"="No reference","2005"="There is no zone box to start zone cleaning","2006"="Enter Do Not Disturb mode during cleaning","2007"="The target area cannot be reached","2008"="Cleaning complete","2009"="Scheduled cleaning completed","2010"="Sensor Dirty","2011"="Area unreachable","2012"="Some areas are unreachable","2015"="Cleaning","2016"="Child lock protection on","2017"="Failed to build a map (Code 2017)","2018"="Network connection error, upgrade failed","2019"="The base station has been powered off (Code 2019)","2020"="The upgrade failed due to a power failure of the base station","2100"="Insufficient battery","2101"="Start charging (Code 2101)","2102"="Cleaning complete (Code 2102)","2103"="Start Charging (Code 2103)","2104"="Start recharging","2105"="Host charging complete","2106"="Please wait for breakpoint charging to complete","2107"="Scheduled cleaning starts","2108"="Relocating","2109"="Secondary cleaning","2110"="Host self-testing","2111"="Map is being generated","2112"="Building","2113"="Static Object Cleaning","2114"="The host has been cleaning continuously for 15 hours, please clean the dust box in time","2115"="Breakpoint charging","2116"="Building (Code 2116)","2117"="Map is being generated (Code 2117)"]
modeNumberRobot Cleaner - Cleaning ModeValue mapping ["0"="Vacuum","1"="Vacuum and Mop","2"="Mop","3"="Vacuum then Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeOnly 0 (All Areas) and 2 (Along the Edges) are sent, like the Mi Home app. Value mapping ["0"="All Areas","1"="Mop","2"="Along the Edges","3"="Area","4"="Spot","5"="Remote Control","6"="Create Map","7"="Room","8"="Floor Type"]
onStringRobot Cleaner - Device Configuration
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeVolume from 0 to 10; the app shows this value multiplied by 10.
repeat_stateSwitchSweep - Clean Twice
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
time_zoneNumberSweep - Time Zone
cur_langStringSweep - LanguageValue mapping ["en_US"="English","zh_CN"="Chinese (Simplified)","zh_HK"="Chinese (Hong Kong)","zh_TW"="Chinese (Traditional)","es_ES"="Spanish","de_DE"="German","fr_FR"="French","pl_PL"="Polish","ru_RU"="Russian","tr_TR"="Turkish","it_IT"="Italian","pt_BR"="Portuguese (Brazil)","ko_KR"="Korean","id_ID"="Indonesian","vi_VN"="Vietnamese","nl_NL"="Dutch","ar_SA"="Arabic","he_IL"="Hebrew","th_TH"="Thai","ja_JP"="Japanese","uk_UA"="Ukrainian"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
main_brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
main_brush_left_timeNumber:TimeMain Brush - Brush Left Time
side_brush_life_levelNumber:DimensionlessSide Brush - Brush Life Level
side_brush_left_timeNumber:TimeSide Brush - Brush Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
multi_prop_vacuumStringSweep - Status Data
cur_map_idNumberMap - Current Map Id
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute
multi_prop_dndStringDo Not Disturb - Status Data

ROIDMI VACUUM EVE ROOK (roidmi.vacuum.v63) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["sweep-start-sweep"="Start Cleaning","custom-pause"="Pause","custom-continue-sweep"="Resume Cleaning","vacuum-stop-sweeping"="Stop Cleaning","battery-start-charge"="Return to Dock","custom-pause-find-charge"="Pause Returning to Dock","custom-continue-find-charge"="Resume Returning to Dock","custom-stop-find-charge"="Stop Returning to Dock","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","custom-start-dust"="Empty Dust Box","custom-find-robot"="Locate Robot","filter-reset-filter-life"="Reset Filter Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","brush-cleaner-reset-brush-life2"="Reset Mop Life","brush-cleaner-reset-brush-life3"="Reset Main Brush Scraper Life","vacuum-start-sweep"="Start Cleaning (Direct Command)"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sleeping","2"="Standby","3"="Paused","4"="Cleaning","5"="Returning to Dock","6"="Charging","7"="Error","8"="Remote Control","9"="Fully Charged","10"="Shut Down","11"="Returning to Dock Paused","12"="Collecting Dust","13"="Building Map","14"="Building Map Paused"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Low Battery, Returning to Dock","2"="Low Battery, Shutting Down","3"="Main Wheel Stuck","4"="Firmware Update Not Possible","5"="Bumper Stuck","6"="Dust Station Full","7"="Robot Tilted","8"="Lidar Stuck","9"="Lidar Cover Stuck","10"="Lidar Point Error","11"="Front Collision Sensor Error","12"="Right Wall Sensor Error","13"="Main Brush Stuck","14"="Side Brush Stuck","15"="Fan Speed Error","16"="Dust Box Removed","17"="Dust Box Full","18"="No Dust Box","19"="Dust Box Full or Removed","20"="Robot Trapped","21"="Robot Lifted","22"="No Dust Box or Water Tank","23"="Water Tank Empty","24"="Started in Restricted Area","25"="Floor Check Error","26"="Returning to Dock Failed","27"="Battery Error","28"="Wheel Error","29"="Lidar Error","30"="Water Pump Error","32"="Main Brush Error","33"="Side Brush Error","34"="Fan Error","35"="Vibration Module Error","36"="Vibration Module Stuck","37"="No Mop","39"="Started on Carpet"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["0"="Off (Mop Only)","1"="Quiet","2"="Standard","3"="Power","4"="Max"]
sweep_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["0"="Vacuum","1"="Mop","2"="Vacuum and Mop"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
volumeNumber:DimensionlessSpeaker - Volume
muteSwitchSpeaker - Mute
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
brush_left_timeNumber:TimeMain Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
brush_left_time1Number:TimeSide Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Brush - Brush Life Level
mop_life_timeNumber:TimeMop - Mop Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
scraper_left_timeNumber:TimeMain Brush Scraper - Scraper Left Time
scraper_life_levelNumber:DimensionlessMain Brush Scraper - Scraper Life Level
mopSwitchCustom - Mop Installed
work_station_freqNumberCustom - Dust Collection FrequencyValue mapping ["0"="Never","1"="After Every Cleaning","2"="After 2 Cleanings","3"="After 3 Cleanings"]
timingStringCustom - Scheduled Cleaning
clean_areaNumber:AreaCustom - Cleaning Area
auto_boostSwitchCustom - Carpet Boost
forbid_modeStringCustom - Do Not DisturbJSON text as used by the app: {"time":[start,end,enabled],"tz":offset,"tzs":offset}, start and end in seconds after midnight, enabled 1 or 0
water_levelNumberCustom - Mop Water LevelValue mapping ["0"="Off (Vacuum Only)","1"="Small","2"="Medium","3"="Max"]
total_clean_timeNumber:TimeCustom - Total Cleaning Time
total_clean_areasNumber:AreaCustom - Total Cleaning Area
clean_countsNumberCustom - Total Cleaning Count
clean_timeNumber:TimeCustom - Cleaning Time
double_cleanSwitchCustom - Clean Twice
edge_sweepSwitchCustom - Edge CleaningNot offered by the Mi Home app
led_switchSwitchCustom - Indicator Light Always On
current_audioStringCustom - Voice Pack
station_typeNumberCustom - Dock TypeValue mapping ["101"="Charging Dock","102"="Dust Collection Station"]
use_auto_areaSwitchMap - Custom Room Settings
path_typeNumberMap - Mop RouteValue mapping ["0"="Standard","1"="Y-Path"]
sweep_modeNumberSweep - Cleaning TaskValue mapping ["0"="Idle","1"="Whole Map","2"="Zone","3"="Current Spot","4"="Spot","7"="Smart","8"="Smart Zone","9"="Deep Whole Map","10"="Along the Wall"]

ROIDMI EVA (roidmi.vacuum.v66) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["sweep-start-sweep"="Start Cleaning","custom-pause"="Pause","custom-continue-sweep"="Resume Cleaning","vacuum-stop-sweeping"="Stop Cleaning","battery-start-charge"="Return to Dock","custom-pause-find-charge"="Pause Returning to Dock","custom-continue-find-charge"="Resume Returning to Dock","custom-stop-find-charge"="Stop Returning to Dock","custom-start-dust"="Collect Dust","custom-find-robot"="Locate Robot","filter-reset-filter-life"="Reset Filter Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","brush-cleaner-reset-brush-life2"="Reset Sensor Life","mop-reset-mop-life"="Reset Mop Life","vacuum-start-sweep"="Start Cleaning (Direct Command)"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sleeping","2"="Standby","3"="Paused","4"="Cleaning","5"="Returning to Dock","6"="Charging","7"="Error","8"="Remote Control","9"="Fully Charged","10"="Shut Down","11"="Returning to Dock Paused","12"="Base Station Working","13"="Washing Mop"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Low Battery, Returning to Dock","2"="Battery Needs Charging","3"="Base Station Tray Removed","4"="Firmware Update Failed","5"="Bumper Stuck","6"="Target Area Unreachable","7"="Robot Tilted","8"="Lidar Stuck or Blocked","9"="Clean Base Station Cleaning Slot","10"="Base Station Communication Error","11"="Clean Front Collision Sensor","12"="Clean Right Wall Sensor","13"="Main Brush Stuck","14"="Side Brush Stuck","15"="Fan Error","16"="Dust Box Missing","17"="Clean Dust Box and Filter","18"="Dust Box Missing (Code 18)","19"="Clean Dust Box and Filter (Code 19)","20"="Robot Trapped","21"="Robot Lifted","22"="Robot Not on the Floor","23"="Water Shortage","24"="Started in Restricted Area","25"="Clean Cliff Sensors","26"="Returning to Dock Failed","27"="Battery Error","28"="Main Wheel Error","29"="Lidar Open Circuit","30"="Mop Motor Error","31"="Mop Detached, Cleaning Ended"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["0"="Off (Mop Only)","1"="Quiet","2"="Standard","3"="Power","4"="Max"]
sweep_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["0"="Vacuum","1"="Mop","2"="Vacuum and Mop"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
volumeNumber:DimensionlessSpeaker - Volume
muteSwitchSpeaker - Mute
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
brush_left_timeNumber:TimeMain Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
brush_left_time1Number:TimeSide Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Brush - Brush Life Level
brush_left_time2Number:TimeSensor - Sensor Left Time
brush_life_level2Number:DimensionlessSensor - Sensor Life Level
mopSwitchCustom - Mop Installed
work_station_freqNumberCustom - Dust Collection FrequencyValue mapping ["0"="Never","1"="After Every Cleaning","2"="After 2 Cleanings","3"="After 3 Cleanings"]
timingStringCustom - Scheduled Cleaning
clean_areaNumber:AreaCustom - Cleaning Area
auto_boostSwitchCustom - Carpet Boost
forbid_modeStringCustom - Do Not DisturbJSON text as used by the app: {"time":[start,end,enabled],"tz":offset,"tzs":offset}, start and end in seconds after midnight, enabled 1 or 0
water_levelNumberCustom - Mop Water LevelValue mapping ["0"="Off (Vacuum Only)","1"="Small","2"="Medium","3"="Max"]
total_clean_timeNumber:TimeCustom - Total Cleaning Time
total_clean_areasNumber:AreaCustom - Total Cleaning Area
clean_countsNumberCustom - Total Cleaning Count
clean_timeNumber:TimeCustom - Cleaning Time
double_cleanSwitchCustom - Clean Twice
edge_sweepSwitchCustom - Edge CleaningNot offered by the Mi Home app
led_switchSwitchCustom - Indicator Light Always On
lidar_collisionSwitchCustom - Lidar Priority
current_audioStringCustom - Voice Pack
station_typeNumberCustom - Dock TypeValue mapping ["101"="Charging Dock","102"="Dust Collection Station"]
explore_build_mapSwitchCustom - Building Map
rug_avoidStringCustom - Carpet AvoidanceValue mapping ["false"="On","true"="Off"]
map_memorySwitchMap - Map SavingRead only: not offered by the Mi Home app; turning it off may discard the saved map
use_auto_areaSwitchMap - Custom Room Settings
path_typeNumberMap - Mop RouteNot offered by the Mi Home app for this model. Value mapping ["0"="Standard","1"="Y-Path"]
sweep_modeNumberSweep - Cleaning TaskValue mapping ["0"="Idle","1"="Whole Map","2"="Zone","3"="Current Spot","4"="Spot","7"="Smart","8"="Smart Zone","9"="Deep Whole Map","10"="Along the Wall"]
mop_life_timeNumber:TimeMop - Mop Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
signalNumberBase Station - ConnectionValue mapping ["0"="Disconnected","1"="Connecting","2"="Weak Signal"]
clear_tank_statusSwitchBase Station - Clean Water Tank OKOFF: the clean water tank is empty or not in place
sewage_tank_statusSwitchBase Station - Dirty Water Tank OKOFF: the dirty water tank is full or not in place
work_statusNumberBase Station - StatusValue mapping ["0"="Idle","1"="Collecting Dust","2"="Washing Mop"]
versionStringBase Station - Firmware Version
ap_nameStringBase Station - Network Name
back_clean_freqNumber:TimeBase Station - Mop Washing IntervalValue mapping ["360"="6 Minutes","540"="9 Minutes","720"="12 Minutes"]
spin_dry_modeStringBase Station - Mop Spin DryingValue mapping ["true"="Dry","false"="Standard"]
air_time_modeNumberBase Station - Mop Drying TimeBase station firmware before 1.6.0. Value mapping ["1"="6 Hours","2"="9 Hours","3"="12 Hours"]
air_time_mode_sliderNumberBase Station - Mop Drying Time LevelBase station firmware 1.6.0 and later: drying time in steps of 2 hours (0-12 = 0-24 hours)

One Intelligent switch(WIFI) (090615.switch.switch01) Channels ​

ChannelTypeDescriptionComment
switch1stateSwitchSwitch 1
switch1nameStringSwitch Name 1Non-ASCII characters of names set in the Mi Home app are shown as u codes.
backlightSwitchBacklightWrite only: the device reports the backlight only in an unnamed status list.

Two Intelligent Switch (WIFI) (090615.switch.switch02) Channels ​

ChannelTypeDescriptionComment
switch1stateSwitchSwitch 1
switch2stateSwitchSwitch 2
switch1nameStringSwitch Name 1Non-ASCII characters of names set in the Mi Home app are shown as u codes.
switch2nameStringSwitch Name 2Non-ASCII characters of names set in the Mi Home app are shown as u codes.
allSwitchAll SwitchesSwitches all gangs on or off. Write only.
backlightSwitchBacklightWrite only: the device reports the backlight only in an unnamed status list.

Three Intelligent switch(WIFI) (090615.switch.switch03) Channels ​

ChannelTypeDescriptionComment
switch1stateSwitchSwitch 1
switch2stateSwitchSwitch 2
switch3stateSwitchSwitch 3
switch1nameStringSwitch Name 1Non-ASCII characters of names set in the Mi Home app are shown as u codes.
switch2nameStringSwitch Name 2Non-ASCII characters of names set in the Mi Home app are shown as u codes.
switch3nameStringSwitch Name 3Non-ASCII characters of names set in the Mi Home app are shown as u codes.
allSwitchAll SwitchesSwitches all gangs on or off. Write only.
backlightSwitchBacklightWrite only: the device reports the backlight only in an unnamed status list.

PTX OneKey Switch (WIFI) (090615.switch.xswitch01) Channels ​

ChannelTypeDescriptionComment
switch1stateSwitchSwitch 1
switch1nameStringSwitch Name 1Non-ASCII characters of names set in the Mi Home app are shown as u codes.
backlightSwitchBacklightWrite only: the device reports the backlight only in an unnamed status list.

PTX Twokey switch(wifi) (090615.switch.xswitch02) Channels ​

ChannelTypeDescriptionComment
switch1stateSwitchSwitch 1
switch2stateSwitchSwitch 2
switch1nameStringSwitch Name 1Non-ASCII characters of names set in the Mi Home app are shown as u codes.
switch2nameStringSwitch Name 2Non-ASCII characters of names set in the Mi Home app are shown as u codes.
allSwitchAll SwitchesSwitches all gangs on or off. Write only.
backlightSwitchBacklightWrite only: the device reports the backlight only in an unnamed status list.

PTX ThreeKey Switch (WIFI) (090615.switch.xswitch03) Channels ​

ChannelTypeDescriptionComment
switch1stateSwitchSwitch 1
switch2stateSwitchSwitch 2
switch3stateSwitchSwitch 3
switch1nameStringSwitch Name 1Non-ASCII characters of names set in the Mi Home app are shown as u codes.
switch2nameStringSwitch Name 2Non-ASCII characters of names set in the Mi Home app are shown as u codes.
switch3nameStringSwitch Name 3Non-ASCII characters of names set in the Mi Home app are shown as u codes.
allSwitchAll SwitchesSwitches all gangs on or off. Write only.
backlightSwitchBacklightWrite only: the device reports the backlight only in an unnamed status list.

SCISHARE Smart Capsule Coffee Machine (scishare.coffee.s1102) Channels ​

ChannelTypeDescriptionComment
powerSwitchPowerWrite only, the machine does not report its power state; see the status channel.
statusNumberStatusValue mapping ["1"="Off","2"="On","3"="Self-Checking","4"="Preheating","5"="Ready","6"="Descaling","7"="Standby","8"="Boiler Preheat Set","10"="Work Cancelled or Alarm","51"="Making Coffee (Code 51)","52"="Making Coffee (Code 52)","55"="Making Coffee (Code 55)","60"="Making Coffee (Code 60)","61"="Making Coffee (Code 61)","150"="Recipes Restored","151"="Espresso Recipe Restored","152"="Americano Recipe Restored","160"="Hot Water Recipe Restored","195"="Factory Settings Restored","201"="Making Coffee (Code 201)","202"="NTC Fault Alarm","203"="Water Tank Empty"]
make_espressoNumberMake EspressoMakes an espresso with the given amount of coffee (ml) at 85 degrees Celsius.
make_americanoNumberMake AmericanoMakes an americano with the given amount of water (ml) at 90 degrees Celsius and 40 ml coffee.
make_hot_waterNumberMake Hot WaterDispenses the given amount of water (ml) at 55 degrees Celsius.
controlStringControlStop ends making a drink, descaling or an alarm. Continue resumes after the water tank was refilled.
preheat_modeNumberBoiler Preheat ModeWrite only. Boiler preheat temperature in degrees Celsius as in the app settings; only accepted while the machine is on.

Xiaomi Scishare Smart Capsule Coffee Machine (scishare.coffee.s1301) Channels ​

ChannelTypeDescriptionComment
powerSwitchPowerWrite only, the machine does not report its power state; see the status channel.
statusNumberStatusValue mapping ["1"="Off","2"="On","3"="Self-Checking","4"="Preheating","5"="Ready","6"="Descaling","7"="Standby","8"="Boiler Preheat Set","10"="Work Cancelled or Alarm","51"="Making Coffee (Code 51)","52"="Making Coffee (Code 52)","55"="Making Coffee (Code 55)","60"="Making Coffee (Code 60)","61"="Making Coffee (Code 61)","150"="Recipes Restored","151"="Espresso Recipe Restored","152"="Americano Recipe Restored","160"="Hot Water Recipe Restored","195"="Factory Settings Restored","201"="Making Coffee (Code 201)","202"="NTC Fault Alarm","203"="Water Tank Empty"]
make_espressoNumberMake EspressoMakes an espresso with the given amount of coffee (ml) at 85 degrees Celsius.
make_americanoNumberMake AmericanoMakes an americano with the given amount of water (ml) at 90 degrees Celsius and 40 ml coffee.
make_hot_waterNumberMake Hot WaterDispenses the given amount of water (ml) at 55 degrees Celsius.
controlStringControlStop ends making a drink, descaling or an alarm. Continue resumes after the water tank was refilled.
preheat_modeNumberBoiler Preheat ModeWrite only. Boiler preheat temperature in degrees Celsius as in the app settings; only accepted while the machine is on.

TINYMU Smart Toilet (tinymu.toiletlid.v1) Channels ​

ChannelTypeDescriptionComment
statusNumberStatus1 is Idle, any other value means the toilet is in use.
filter_days_leftNumber:TimeFilter Days Left
filter_lifeNumber:DimensionlessFilter Remaining
deodorizationSwitchDeodorizationWrite only.

Mi Smart Dishwasher (4 Dining Sets) (viomi.dishwasher.m02) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
statusNumberStatusValue mapping ["0"="Off","1"="Standby","2"="Washing","3"="Paused","4"="Finished","5"="Scheduled","6"="Drying"]
programNumberProgramSelecting a program starts washing, as in the app.
wash_processNumberWash StepValue mapping ["0"="Not Running","1"="Prewash","2"="Wash","3"="Rinse","4"="Dry"]
remaining_timeNumber:TimeRemaining Time
water_temperatureNumber:TemperatureWater Temperature
child_lockSwitchChild Lock
controlStringControlValue mapping ["pause"="Pause","resume"="Resume","cancel"="Cancel"]

Viomi sweeper PRO (viomi.vacuum.v3) Channels ​

ChannelTypeDescriptionComment
vacuumactionNumberVacuum actionStart, Pause and Stop are sent as set_mode_withroom like the Mi Home app does (cleaning type, action, number of rooms). Start uses cleaning type 0 (vacuum); the app derives the type from the is_mop channel, use Start vacuum and mop or Start mop for those types. The app pauses with action 2 from its main button (3 in some other flows; python-miio documents 2). Dock sends set_charge 1, Cancel return to dock sends set_charge 0, Find robot sends set_resetpos 1 (the app Find function). Not exposed: room, zone and spot cleaning, virtual walls and map editing (need several values). Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock","4"="Cancel return to dock","5"="Start vacuum and mop","6"="Start mop","7"="Find robot"]
stateNumberStateLabels as shown by the Mi Home app (python-miio: 0 idle not docked, 1 idle). Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
modeNumberCleaning modeRead only: the Mi Home app selects the mode with the start command (edge, zone and spot cleaning need more values). Value mapping ["0"="Whole home","1"="Whole home (mop mode)","2"="Along edges","3"="Zone","4"="Spot"]
err_stateNumberErrorLabels from the Mi Home app error table (500 to 537) and state texts (507, 517, 518, 2108 to 2110). 2100 is only used internally by the app; 2103 and 2104 are not used by the app (earlier community lists). Value mapping ["0"="No error","500"="Radar timed out","501"="Wheels suspended","502"="Low battery","503"="Dust bin or 2-in-1 bin not installed","507"="Could not reposition","508"="Not on level surface","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Could not return to dock","512"="Could not return to dock (512)","513"="Could not navigate","514"="Vacuum stuck","515"="Charging error","516"="Temperature error","517"="Updating system","518"="Battery too low to start","521"="Water tank not installed","522"="Mop not installed","525"="Insufficient water","527"="Remove mop","528"="Dust bin or 2-in-1 bin not installed (528)","529"="Mop and 550 ml water tank not installed","530"="2-in-1 bin and mop not installed","531"="2-in-1 bin not installed","537"="Do not disturb active, no cleaning","2100"="Cleaning finished","2101"="Low battery, charging before continuing","2103"="Charging","2104"="Fully charged","2108"="Repositioning","2109"="Cleaning again","2110"="Self-inspecting"]
battery_lifeNumber:DimensionlessBattery
box_typeNumberBin / tank typeValue mapping ["0"="None","1"="Dust bin","2"="Water tank","3"="Dust bin and water tank"]
mop_typeNumberMop installedValue mapping ["0"="No","1"="Yes"]
mop_routeNumberMop patternNot offered by the app plugin of the oldest v3 and v6 firmware. Value mapping ["0"="S-pattern","1"="Y-pattern"]
clean_timeNumber:TimeClean timeMinutes, as shown by the Mi Home app (rounded there).
clean_areaNumber:AreaClean areaSquare meter, as shown by the Mi Home app (rounded there).
suction_gradeNumberSuction powerValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_gradeNumberWater levelSuction power and water level are both set with set_suction; the app uses 11 to 13 for the water level. Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_mapSwitchMap remembered
has_mapNumberHas mapValue mapping ["0"="No","1"="Yes"]
has_newmapNumberNew map availableValue mapping ["0"="No","1"="Yes"]
cleaning_typeNumberCleaning typeSelects what the next cleaning does, as in the app. python-miio also lists 3 and 4 (zone, spot) which the app does not use here. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
repeat_cleaningSwitchRepeat cleaningRepeats the cleaning once (app: Secondary cleanup, takes effect once).
volumeNumberVolumeLevel 0 (voice off) to 10. The app switches the voice with set_voice [on, level] and sets the level with set_voice [1, level].
side_brush_hoursNumber:TimeSide brush remaining timeExpected remaining hours, as shown by the Mi Home app.
main_brush_hoursNumber:TimeMain brush remaining timeExpected remaining hours, as shown by the Mi Home app.
hypa_hoursNumber:TimeDust compartment filter remaining timeExpected remaining hours, as shown by the Mi Home app.
mop_hoursNumber:TimeMop remaining timeExpected remaining hours, as shown by the Mi Home app.
side_brush_lifeNumber:DimensionlessSide brush lifeRemaining life in percent, as shown by the Mi Home app.
main_brush_lifeNumber:DimensionlessMain brush lifeRemaining life in percent, as shown by the Mi Home app.
hypa_lifeNumber:DimensionlessDust compartment filter lifeRemaining life in percent, as shown by the Mi Home app.
mop_lifeNumber:DimensionlessMop lifeRemaining life in percent, as shown by the Mi Home app.

Viomi Cleaning Robot V-RVCLM21B (viomi.vacuum.v6) Channels ​

ChannelTypeDescriptionComment
vacuumactionNumberVacuum actionStart, Pause and Stop are sent as set_mode_withroom like the Mi Home app does (cleaning type, action, number of rooms). Start uses cleaning type 0 (vacuum); the app derives the type from the is_mop channel, use Start vacuum and mop or Start mop for those types. The app pauses with action 2 from its main button (3 in some other flows; python-miio documents 2). Dock sends set_charge 1, Cancel return to dock sends set_charge 0, Find robot sends set_resetpos 1 (the app Find function). Not exposed: room, zone and spot cleaning, virtual walls and map editing (need several values). Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock","4"="Cancel return to dock","5"="Start vacuum and mop","6"="Start mop","7"="Find robot"]
stateNumberStateLabels as shown by the Mi Home app (python-miio: 0 idle not docked, 1 idle). Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
modeNumberCleaning modeRead only: the Mi Home app selects the mode with the start command (edge, zone and spot cleaning need more values). Value mapping ["0"="Whole home","1"="Whole home (mop mode)","2"="Along edges","3"="Zone","4"="Spot"]
err_stateNumberErrorLabels from the Mi Home app error table (500 to 537) and state texts (507, 517, 518, 2108 to 2110). 2100 is only used internally by the app; 2103 and 2104 are not used by the app (earlier community lists). Value mapping ["0"="No error","500"="Radar timed out","501"="Wheels suspended","502"="Low battery","503"="Dust bin or 2-in-1 bin not installed","507"="Could not reposition","508"="Not on level surface","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Could not return to dock","512"="Could not return to dock (512)","513"="Could not navigate","514"="Vacuum stuck","515"="Charging error","516"="Temperature error","517"="Updating system","518"="Battery too low to start","521"="Water tank not installed","522"="Mop not installed","525"="Insufficient water","527"="Remove mop","528"="Dust bin or 2-in-1 bin not installed (528)","529"="Mop and 550 ml water tank not installed","530"="2-in-1 bin and mop not installed","531"="2-in-1 bin not installed","537"="Do not disturb active, no cleaning","2100"="Cleaning finished","2101"="Low battery, charging before continuing","2103"="Charging","2104"="Fully charged","2108"="Repositioning","2109"="Cleaning again","2110"="Self-inspecting"]
battery_lifeNumber:DimensionlessBattery
box_typeNumberBin / tank typeValue mapping ["0"="None","1"="Dust bin","2"="Water tank","3"="Dust bin and water tank"]
mop_typeNumberMop installedValue mapping ["0"="No","1"="Yes"]
mop_routeNumberMop patternNot offered by the app plugin of the oldest v3 and v6 firmware. Value mapping ["0"="S-pattern","1"="Y-pattern"]
clean_timeNumber:TimeClean timeMinutes, as shown by the Mi Home app (rounded there).
clean_areaNumber:AreaClean areaSquare meter, as shown by the Mi Home app (rounded there).
suction_gradeNumberSuction powerValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_gradeNumberWater levelSuction power and water level are both set with set_suction; the app uses 11 to 13 for the water level. Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_mapSwitchMap remembered
has_mapNumberHas mapValue mapping ["0"="No","1"="Yes"]
has_newmapNumberNew map availableValue mapping ["0"="No","1"="Yes"]
cleaning_typeNumberCleaning typeSelects what the next cleaning does, as in the app. python-miio also lists 3 and 4 (zone, spot) which the app does not use here. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
repeat_cleaningSwitchRepeat cleaningRepeats the cleaning once (app: Secondary cleanup, takes effect once).
volumeNumberVolumeLevel 0 (voice off) to 10. The app switches the voice with set_voice [on, level] and sets the level with set_voice [1, level].
side_brush_hoursNumber:TimeSide brush remaining timeExpected remaining hours, as shown by the Mi Home app.
main_brush_hoursNumber:TimeMain brush remaining timeExpected remaining hours, as shown by the Mi Home app.
hypa_hoursNumber:TimeDust compartment filter remaining timeExpected remaining hours, as shown by the Mi Home app.
mop_hoursNumber:TimeMop remaining timeExpected remaining hours, as shown by the Mi Home app.
side_brush_lifeNumber:DimensionlessSide brush lifeRemaining life in percent, as shown by the Mi Home app.
main_brush_lifeNumber:DimensionlessMain brush lifeRemaining life in percent, as shown by the Mi Home app.
hypa_lifeNumber:DimensionlessDust compartment filter lifeRemaining life in percent, as shown by the Mi Home app.
mop_lifeNumber:DimensionlessMop lifeRemaining life in percent, as shown by the Mi Home app.

Mi Robot Vacuum-Mop P (viomi.vacuum.v7) Channels ​

ChannelTypeDescriptionComment
vacuumactionNumberVacuum actionStart, Pause and Stop are sent as set_mode_withroom like the Mi Home app does (cleaning type, action, number of rooms). Start uses cleaning type 0 (vacuum); the app derives the type from the is_mop channel, use Start vacuum and mop or Start mop for those types. The app pauses with action 2 from its main button (3 in some other flows; python-miio documents 2). Dock sends set_charge 1, Cancel return to dock sends set_charge 0, Find robot sends set_resetpos 1 (the app Find function). Not exposed: room, zone and spot cleaning, virtual walls and map editing (need several values). Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock","4"="Cancel return to dock","5"="Start vacuum and mop","6"="Start mop","7"="Find robot"]
stateNumberStateLabels as shown by the Mi Home app (python-miio: 0 idle not docked, 1 idle). Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
modeNumberCleaning modeRead only: the Mi Home app selects the mode with the start command (edge, zone and spot cleaning need more values). Value mapping ["0"="Whole home","1"="Whole home (mop mode)","2"="Along edges","3"="Zone","4"="Spot"]
err_stateNumberErrorLabels from the Mi Home app error table (500 to 537) and state texts (507, 517, 518, 2108 to 2110). 2100 is only used internally by the app; 2103 and 2104 are not used by the app (earlier community lists). Value mapping ["0"="No error","500"="Radar timed out","501"="Wheels suspended","502"="Low battery","503"="Dust bin or 2-in-1 bin not installed","507"="Could not reposition","508"="Not on level surface","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Could not return to dock","512"="Could not return to dock (512)","513"="Could not navigate","514"="Vacuum stuck","515"="Charging error","516"="Temperature error","517"="Updating system","518"="Battery too low to start","521"="Water tank not installed","522"="Mop not installed","525"="Insufficient water","527"="Remove mop","528"="Dust bin or 2-in-1 bin not installed (528)","529"="Mop and 550 ml water tank not installed","530"="2-in-1 bin and mop not installed","531"="2-in-1 bin not installed","537"="Do not disturb active, no cleaning","2100"="Cleaning finished","2101"="Low battery, charging before continuing","2103"="Charging","2104"="Fully charged","2108"="Repositioning","2109"="Cleaning again","2110"="Self-inspecting"]
battery_lifeNumber:DimensionlessBattery
box_typeNumberBin / tank typeValue mapping ["0"="None","1"="Dust bin","2"="Water tank","3"="Dust bin and water tank"]
mop_typeNumberMop installedValue mapping ["0"="No","1"="Yes"]
mop_routeNumberMop patternNot offered by the app plugin of the oldest v3 and v6 firmware. Value mapping ["0"="S-pattern","1"="Y-pattern"]
clean_timeNumber:TimeClean timeMinutes, as shown by the Mi Home app (rounded there).
clean_areaNumber:AreaClean areaSquare meter, as shown by the Mi Home app (rounded there).
suction_gradeNumberSuction powerValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_gradeNumberWater levelSuction power and water level are both set with set_suction; the app uses 11 to 13 for the water level. Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_mapSwitchMap remembered
has_mapNumberHas mapValue mapping ["0"="No","1"="Yes"]
has_newmapNumberNew map availableValue mapping ["0"="No","1"="Yes"]
cleaning_typeNumberCleaning typeSelects what the next cleaning does, as in the app. python-miio also lists 3 and 4 (zone, spot) which the app does not use here. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
repeat_cleaningSwitchRepeat cleaningRepeats the cleaning once (app: Secondary cleanup, takes effect once).
volumeNumberVolumeLevel 0 (voice off) to 10. The app switches the voice with set_voice [on, level] and sets the level with set_voice [1, level].
side_brush_hoursNumber:TimeSide brush remaining timeExpected remaining hours, as shown by the Mi Home app.
main_brush_hoursNumber:TimeMain brush remaining timeExpected remaining hours, as shown by the Mi Home app.
hypa_hoursNumber:TimeDust compartment filter remaining timeExpected remaining hours, as shown by the Mi Home app.
mop_hoursNumber:TimeMop remaining timeExpected remaining hours, as shown by the Mi Home app.
side_brush_lifeNumber:DimensionlessSide brush lifeRemaining life in percent, as shown by the Mi Home app.
main_brush_lifeNumber:DimensionlessMain brush lifeRemaining life in percent, as shown by the Mi Home app.
hypa_lifeNumber:DimensionlessDust compartment filter lifeRemaining life in percent, as shown by the Mi Home app.
mop_lifeNumber:DimensionlessMop lifeRemaining life in percent, as shown by the Mi Home app.

Mi Robot Vacuum-Mop P (viomi.vacuum.v8) Channels ​

ChannelTypeDescriptionComment
vacuumactionNumberVacuum actionStart, Pause and Stop are sent as set_mode_withroom like the Mi Home app does (cleaning type, action, number of rooms). Start uses cleaning type 0 (vacuum); the app derives the type from the is_mop channel, use Start vacuum and mop or Start mop for those types. The app pauses with action 2 from its main button (3 in some other flows; python-miio documents 2). Dock sends set_charge 1, Cancel return to dock sends set_charge 0, Find robot sends set_resetpos 1 (the app Find function). Not exposed: room, zone and spot cleaning, virtual walls and map editing (need several values). Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock","4"="Cancel return to dock","5"="Start vacuum and mop","6"="Start mop","7"="Find robot"]
stateNumberStateLabels as shown by the Mi Home app (python-miio: 0 idle not docked, 1 idle). Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
modeNumberCleaning modeRead only: the Mi Home app selects the mode with the start command (edge, zone and spot cleaning need more values). Value mapping ["0"="Whole home","1"="Whole home (mop mode)","2"="Along edges","3"="Zone","4"="Spot"]
err_stateNumberErrorLabels from the Mi Home app error table (500 to 537) and state texts (507, 517, 518, 2108 to 2110). 2100 is only used internally by the app; 2103 and 2104 are not used by the app (earlier community lists). Value mapping ["0"="No error","500"="Radar timed out","501"="Wheels suspended","502"="Low battery","503"="Dust bin or 2-in-1 bin not installed","507"="Could not reposition","508"="Not on level surface","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Could not return to dock","512"="Could not return to dock (512)","513"="Could not navigate","514"="Vacuum stuck","515"="Charging error","516"="Temperature error","517"="Updating system","518"="Battery too low to start","521"="Water tank not installed","522"="Mop not installed","525"="Insufficient water","527"="Remove mop","528"="Dust bin or 2-in-1 bin not installed (528)","529"="Mop and 550 ml water tank not installed","530"="2-in-1 bin and mop not installed","531"="2-in-1 bin not installed","537"="Do not disturb active, no cleaning","2100"="Cleaning finished","2101"="Low battery, charging before continuing","2103"="Charging","2104"="Fully charged","2108"="Repositioning","2109"="Cleaning again","2110"="Self-inspecting"]
battery_lifeNumber:DimensionlessBattery
box_typeNumberBin / tank typeValue mapping ["0"="None","1"="Dust bin","2"="Water tank","3"="Dust bin and water tank"]
mop_typeNumberMop installedValue mapping ["0"="No","1"="Yes"]
mop_routeNumberMop patternNot offered by the app plugin of the oldest v3 and v6 firmware. Value mapping ["0"="S-pattern","1"="Y-pattern"]
clean_timeNumber:TimeClean timeMinutes, as shown by the Mi Home app (rounded there).
clean_areaNumber:AreaClean areaSquare meter, as shown by the Mi Home app (rounded there).
suction_gradeNumberSuction powerValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_gradeNumberWater levelSuction power and water level are both set with set_suction; the app uses 11 to 13 for the water level. Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_mapSwitchMap remembered
has_mapNumberHas mapValue mapping ["0"="No","1"="Yes"]
has_newmapNumberNew map availableValue mapping ["0"="No","1"="Yes"]
cleaning_typeNumberCleaning typeSelects what the next cleaning does, as in the app. python-miio also lists 3 and 4 (zone, spot) which the app does not use here. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
repeat_cleaningSwitchRepeat cleaningRepeats the cleaning once (app: Secondary cleanup, takes effect once).
volumeNumberVolumeLevel 0 (voice off) to 10. The app switches the voice with set_voice [on, level] and sets the level with set_voice [1, level].
side_brush_hoursNumber:TimeSide brush remaining timeExpected remaining hours, as shown by the Mi Home app.
main_brush_hoursNumber:TimeMain brush remaining timeExpected remaining hours, as shown by the Mi Home app.
hypa_hoursNumber:TimeDust compartment filter remaining timeExpected remaining hours, as shown by the Mi Home app.
mop_hoursNumber:TimeMop remaining timeExpected remaining hours, as shown by the Mi Home app.
side_brush_lifeNumber:DimensionlessSide brush lifeRemaining life in percent, as shown by the Mi Home app.
main_brush_lifeNumber:DimensionlessMain brush lifeRemaining life in percent, as shown by the Mi Home app.
hypa_lifeNumber:DimensionlessDust compartment filter lifeRemaining life in percent, as shown by the Mi Home app.
mop_lifeNumber:DimensionlessMop lifeRemaining life in percent, as shown by the Mi Home app.

Mi Robot Vacuum-Mop P (viomi.vacuum.v9) Channels ​

ChannelTypeDescriptionComment
vacuumactionNumberVacuum actionStart, Pause and Stop are sent as set_mode_withroom like the Mi Home app does (cleaning type, action, number of rooms). Start uses cleaning type 0 (vacuum); the app derives the type from the is_mop channel, use Start vacuum and mop or Start mop for those types. The app pauses with action 2 from its main button (3 in some other flows; python-miio documents 2). Dock sends set_charge 1, Cancel return to dock sends set_charge 0, Find robot sends set_resetpos 1 (the app Find function). Not exposed: room, zone and spot cleaning, virtual walls and map editing (need several values). Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock","4"="Cancel return to dock","5"="Start vacuum and mop","6"="Start mop","7"="Find robot"]
stateNumberStateLabels as shown by the Mi Home app (python-miio: 0 idle not docked, 1 idle). Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
modeNumberCleaning modeRead only: the Mi Home app selects the mode with the start command (edge, zone and spot cleaning need more values). Value mapping ["0"="Whole home","1"="Whole home (mop mode)","2"="Along edges","3"="Zone","4"="Spot"]
err_stateNumberErrorLabels from the Mi Home app error table (500 to 537) and state texts (507, 517, 518, 2108 to 2110). 2100 is only used internally by the app; 2103 and 2104 are not used by the app (earlier community lists). Value mapping ["0"="No error","500"="Radar timed out","501"="Wheels suspended","502"="Low battery","503"="Dust bin or 2-in-1 bin not installed","507"="Could not reposition","508"="Not on level surface","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Could not return to dock","512"="Could not return to dock (512)","513"="Could not navigate","514"="Vacuum stuck","515"="Charging error","516"="Temperature error","517"="Updating system","518"="Battery too low to start","521"="Water tank not installed","522"="Mop not installed","525"="Insufficient water","527"="Remove mop","528"="Dust bin or 2-in-1 bin not installed (528)","529"="Mop and 550 ml water tank not installed","530"="2-in-1 bin and mop not installed","531"="2-in-1 bin not installed","537"="Do not disturb active, no cleaning","2100"="Cleaning finished","2101"="Low battery, charging before continuing","2103"="Charging","2104"="Fully charged","2108"="Repositioning","2109"="Cleaning again","2110"="Self-inspecting"]
battery_lifeNumber:DimensionlessBattery
box_typeNumberBin / tank typeValue mapping ["0"="None","1"="Dust bin","2"="Water tank","3"="Dust bin and water tank"]
mop_typeNumberMop installedValue mapping ["0"="No","1"="Yes"]
mop_routeNumberMop patternNot offered by the app plugin of the oldest v3 and v6 firmware. Value mapping ["0"="S-pattern","1"="Y-pattern"]
clean_timeNumber:TimeClean timeMinutes, as shown by the Mi Home app (rounded there).
clean_areaNumber:AreaClean areaSquare meter, as shown by the Mi Home app (rounded there).
suction_gradeNumberSuction powerValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_gradeNumberWater levelSuction power and water level are both set with set_suction; the app uses 11 to 13 for the water level. Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_mapSwitchMap remembered
has_mapNumberHas mapValue mapping ["0"="No","1"="Yes"]
has_newmapNumberNew map availableValue mapping ["0"="No","1"="Yes"]
cleaning_typeNumberCleaning typeSelects what the next cleaning does, as in the app. python-miio also lists 3 and 4 (zone, spot) which the app does not use here. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
repeat_cleaningSwitchRepeat cleaningRepeats the cleaning once (app: Secondary cleanup, takes effect once).
volumeNumberVolumeLevel 0 (voice off) to 10. The app switches the voice with set_voice [on, level] and sets the level with set_voice [1, level].
side_brush_hoursNumber:TimeSide brush remaining timeExpected remaining hours, as shown by the Mi Home app.
main_brush_hoursNumber:TimeMain brush remaining timeExpected remaining hours, as shown by the Mi Home app.
hypa_hoursNumber:TimeDust compartment filter remaining timeExpected remaining hours, as shown by the Mi Home app.
mop_hoursNumber:TimeMop remaining timeExpected remaining hours, as shown by the Mi Home app.
side_brush_lifeNumber:DimensionlessSide brush lifeRemaining life in percent, as shown by the Mi Home app.
main_brush_lifeNumber:DimensionlessMain brush lifeRemaining life in percent, as shown by the Mi Home app.
hypa_lifeNumber:DimensionlessDust compartment filter lifeRemaining life in percent, as shown by the Mi Home app.
mop_lifeNumber:DimensionlessMop lifeRemaining life in percent, as shown by the Mi Home app.

Viomi Robot Vacuum (viomi.vacuum.v10) (viomi.vacuum.v10) Channels ​

ChannelTypeDescriptionComment
vacuumactionNumberVacuum actionStart, Pause and Stop are sent as set_mode_withroom like the Mi Home app does (cleaning type, action, number of rooms). Start uses cleaning type 0 (vacuum); the app derives the type from the is_mop channel, use Start vacuum and mop or Start mop for those types. The app pauses with action 2 from its main button (3 in some other flows; python-miio documents 2). Dock sends set_charge 1, Cancel return to dock sends set_charge 0, Find robot sends set_resetpos 1 (the app Find function). Not exposed: room, zone and spot cleaning, virtual walls and map editing (need several values). Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock","4"="Cancel return to dock","5"="Start vacuum and mop","6"="Start mop","7"="Find robot"]
stateNumberStateLabels as shown by the Mi Home app (python-miio: 0 idle not docked, 1 idle). Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
modeNumberCleaning modeRead only: the Mi Home app selects the mode with the start command (edge, zone and spot cleaning need more values). Value mapping ["0"="Whole home","1"="Whole home (mop mode)","2"="Along edges","3"="Zone","4"="Spot"]
err_stateNumberErrorLabels from the Mi Home app error table (500 to 537) and state texts (507, 517, 518, 2108 to 2110). 2100 is only used internally by the app; 2103 and 2104 are not used by the app (earlier community lists). Value mapping ["0"="No error","500"="Radar timed out","501"="Wheels suspended","502"="Low battery","503"="Dust bin or 2-in-1 bin not installed","507"="Could not reposition","508"="Not on level surface","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Could not return to dock","512"="Could not return to dock (512)","513"="Could not navigate","514"="Vacuum stuck","515"="Charging error","516"="Temperature error","517"="Updating system","518"="Battery too low to start","521"="Water tank not installed","522"="Mop not installed","525"="Insufficient water","527"="Remove mop","528"="Dust bin or 2-in-1 bin not installed (528)","529"="Mop and 550 ml water tank not installed","530"="2-in-1 bin and mop not installed","531"="2-in-1 bin not installed","537"="Do not disturb active, no cleaning","2100"="Cleaning finished","2101"="Low battery, charging before continuing","2103"="Charging","2104"="Fully charged","2108"="Repositioning","2109"="Cleaning again","2110"="Self-inspecting"]
battery_lifeNumber:DimensionlessBattery
box_typeNumberBin / tank typeValue mapping ["0"="None","1"="Dust bin","2"="Water tank","3"="Dust bin and water tank"]
mop_typeNumberMop installedValue mapping ["0"="No","1"="Yes"]
mop_routeNumberMop patternNot offered by the app plugin of the oldest v3 and v6 firmware. Value mapping ["0"="S-pattern","1"="Y-pattern"]
clean_timeNumber:TimeClean timeMinutes, as shown by the Mi Home app (rounded there).
clean_areaNumber:AreaClean areaSquare meter, as shown by the Mi Home app (rounded there).
suction_gradeNumberSuction powerValue mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Turbo"]
water_gradeNumberWater levelSuction power and water level are both set with set_suction; the app uses 11 to 13 for the water level. Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_mapSwitchMap remembered
has_mapNumberHas mapValue mapping ["0"="No","1"="Yes"]
has_newmapNumberNew map availableValue mapping ["0"="No","1"="Yes"]
cleaning_typeNumberCleaning typeSelects what the next cleaning does, as in the app. python-miio also lists 3 and 4 (zone, spot) which the app does not use here. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
repeat_cleaningSwitchRepeat cleaningRepeats the cleaning once (app: Secondary cleanup, takes effect once).
volumeNumberVolumeLevel 0 (voice off) to 10. The app switches the voice with set_voice [on, level] and sets the level with set_voice [1, level].
side_brush_hoursNumber:TimeSide brush remaining timeExpected remaining hours, as shown by the Mi Home app.
main_brush_hoursNumber:TimeMain brush remaining timeExpected remaining hours, as shown by the Mi Home app.
hypa_hoursNumber:TimeDust compartment filter remaining timeExpected remaining hours, as shown by the Mi Home app.
mop_hoursNumber:TimeMop remaining timeExpected remaining hours, as shown by the Mi Home app.
side_brush_lifeNumber:DimensionlessSide brush lifeRemaining life in percent, as shown by the Mi Home app.
main_brush_lifeNumber:DimensionlessMain brush lifeRemaining life in percent, as shown by the Mi Home app.
hypa_lifeNumber:DimensionlessDust compartment filter lifeRemaining life in percent, as shown by the Mi Home app.
mop_lifeNumber:DimensionlessMop lifeRemaining life in percent, as shown by the Mi Home app.

Viomi V-SLAM Robot Vacuum (viomi.vacuum.v11) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsThe start actions send the start command of the Mi Home app with the cleaning type and mode as constants; starting again after a pause resumes the run. Point cleaning: write point-x and point-y first; zone cleaning: write zone-points first; then send the start action. Map editing (virtual walls, restricted areas) and schedules need several inputs and are not available. Value mapping ["start-vacuum"="Start vacuuming","start-vacuum-walls"="Start vacuuming along walls","start-vacuum-mop"="Start vacuuming and mopping","start-vacuum-mop-walls"="Start vacuuming and mopping along walls","start-mop"="Start mopping","start-mop-walls"="Start mopping along walls","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
statusNumberStatusThe order differs from the newer viomi.vacuum models (vacuuming is 3). Value mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Vacuuming","4"="Returning to dock","5"="Charging","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError and status texts of the Mi Home app; codes without text are shown as number. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery level too low","503"="Dust box or 2-in-1 tank not installed","507"="Relocation failed","508"="Started on a slope","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","515"="Charging error, clean the charging contacts","516"="Temperature error","517"="System updating","518"="Battery level insufficient","521"="Water tank not installed","522"="Mop not installed","527"="Remove the mop","528"="Paused, dust box or 2-in-1 tank missing","529"="Paused, install mop and water tank","530"="Paused, install 2-in-1 tank and mop","531"="Paused, install 2-in-1 tank","2101"="Low battery, charging before continuing","2108"="Relocating","2109"="Repeat cleaning in progress","2110"="Self-checking"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot when zone, point or manual control cleaning is started. Value mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
suction-gradeNumberSuction powerThe spec calls this property mode, the Mi Home app uses it as suction power. Value mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelThe spec calls this property target-water-level. Value mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeThe spec calls this property rinsh-time; the Mi Home app shows it as the cleaning time in minutes of the current or last run.
clean-areaNumber:AreaCleaned areaThe spec calls this property target-distance; the Mi Home app shows it as the cleaned area in square meters of the current or last run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
repeat-stateSwitchRepeat cleaningThe spec calls this property recording-mode, the Mi Home app uses it as repeat cleaning (switches off after one run).
remember-stateSwitchRemember mapThe spec calls this property massage-part, the Mi Home app uses it as memory map switch.
has-mapSwitchMap availableThe spec calls this property current-step-count, the Mi Home app uses it as has_map (on when a map is saved).
manual-controlNumberManual controlWrite only. The Mi Home app sends 1 to 4 while a direction key is pressed, 5 when it is released and 10 when the remote control page is opened or closed. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
point-xNumberPoint cleaning target XMap x coordinate; write point-y too, then send the action start-point-clean.
point-yNumberPoint cleaning target YMap y coordinate; write point-x too, then send the action start-point-clean.
zone-pointsStringZone cleaning cornersEight coordinates (four corner points) as JSON list of numbers, as sent by the Mi Home app; send the action start-zone-clean afterwards.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]

Viomi Cleaning Robot X2 (viomi.vacuum.v12) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsStart cleaning sends the room cleaning command of the Mi Home app without rooms (whole area); it also resumes a paused run. Point and zone cleaning: write target-point or zone-points first, then send the start action. Save, replace or discard the new map is the answer to the new map question of the app (see has-newmap). Create a new map, Clean rooms in order and the voice pack download exist on newer models and firmware only. Map editing (rooms, virtual walls, restricted areas), saved map selection, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","start-sweep-walls"="Start cleaning along walls","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","save-new-map"="Save the new map","replace-saved-map"="Replace the saved map with the new map","discard-new-map"="Discard the new map","create-new-map"="Create a new map","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
room-clean-queueStringClean rooms in orderCleans the rooms in the given order, ids separated by a comma (for example 3,1,2), as the room customization of the Mi Home app. Only on newer models and firmware.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError and status texts of the Mi Home app; codes without text are shown as number. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery level too low","503"="Dust box or 2-in-1 tank not installed","507"="Relocation failed","508"="Started on a slope","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","515"="Charging error, clean the charging contacts","516"="Temperature error","517"="System updating","518"="Battery level insufficient","521"="Water tank not installed","522"="Mop not installed","527"="Remove the mop","528"="Paused, dust box or 2-in-1 tank missing","529"="Paused, install mop and water tank","530"="Paused, install 2-in-1 tank and mop","531"="Paused, install 2-in-1 tank","2101"="Low battery, charging before continuing","2108"="Relocating","2109"="Repeat cleaning in progress","2110"="Self-checking"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot when zone, point or manual control cleaning is started. Value mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember mapMemory map switch of the Mi Home app.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot read by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot read by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. The Mi Home app sends 1 to 4 while a direction key is pressed, 5 when it is released and 10 when the remote control page is opened or closed. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap availableOn when the robot has a saved (remembered) map.
has-newmapSwitchNew mapOn when the robot found a new map; the Mi Home app then asks to save, replace or discard it (see the actions).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi V3 (viomi.vacuum.v13) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsStart cleaning sends the room cleaning command of the Mi Home app without rooms (whole area); it also resumes a paused run. Point and zone cleaning: write target-point or zone-points first, then send the start action. Save, replace or discard the new map is the answer to the new map question of the app (see has-newmap). Create a new map, Clean rooms in order and the voice pack download exist on newer models and firmware only. Map editing (rooms, virtual walls, restricted areas), saved map selection, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","start-sweep-walls"="Start cleaning along walls","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","save-new-map"="Save the new map","replace-saved-map"="Replace the saved map with the new map","discard-new-map"="Discard the new map","create-new-map"="Create a new map","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
room-clean-queueStringClean rooms in orderCleans the rooms in the given order, ids separated by a comma (for example 3,1,2), as the room customization of the Mi Home app. Only on newer models and firmware.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError and status texts of the Mi Home app; codes without text are shown as number. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery level too low","503"="Dust box or 2-in-1 tank not installed","507"="Relocation failed","508"="Started on a slope","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","515"="Charging error, clean the charging contacts","516"="Temperature error","517"="System updating","518"="Battery level insufficient","521"="Water tank not installed","522"="Mop not installed","527"="Remove the mop","528"="Paused, dust box or 2-in-1 tank missing","529"="Paused, install mop and water tank","530"="Paused, install 2-in-1 tank and mop","531"="Paused, install 2-in-1 tank","2101"="Low battery, charging before continuing","2108"="Relocating","2109"="Repeat cleaning in progress","2110"="Self-checking"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot when zone, point or manual control cleaning is started. Value mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember mapMemory map switch of the Mi Home app.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot read by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot read by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. The Mi Home app sends 1 to 4 while a direction key is pressed, 5 when it is released and 10 when the remote control page is opened or closed. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap availableOn when the robot has a saved (remembered) map.
has-newmapSwitchNew mapOn when the robot found a new map; the Mi Home app then asks to save, replace or discard it (see the actions).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI Alpha 2 Pro (viomi.vacuum.v15) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi Robot Vacuum-Mop JC (viomi.vacuum.v17) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi S9 (viomi.vacuum.v18) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi SE (viomi.vacuum.v19) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsStart cleaning sends the room cleaning command of the Mi Home app without rooms (whole area); it also resumes a paused run. Point and zone cleaning: write target-point or zone-points first, then send the start action. Save, replace or discard the new map is the answer to the new map question of the app (see has-newmap). Create a new map, Clean rooms in order and the voice pack download exist on newer models and firmware only. Map editing (rooms, virtual walls, restricted areas), saved map selection, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","start-sweep-walls"="Start cleaning along walls","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","save-new-map"="Save the new map","replace-saved-map"="Replace the saved map with the new map","discard-new-map"="Discard the new map","create-new-map"="Create a new map","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
room-clean-queueStringClean rooms in orderCleans the rooms in the given order, ids separated by a comma (for example 3,1,2), as the room customization of the Mi Home app. Only on newer models and firmware.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError and status texts of the Mi Home app; codes without text are shown as number. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery level too low","503"="Dust box or 2-in-1 tank not installed","507"="Relocation failed","508"="Started on a slope","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","515"="Charging error, clean the charging contacts","516"="Temperature error","517"="System updating","518"="Battery level insufficient","521"="Water tank not installed","522"="Mop not installed","527"="Remove the mop","528"="Paused, dust box or 2-in-1 tank missing","529"="Paused, install mop and water tank","530"="Paused, install 2-in-1 tank and mop","531"="Paused, install 2-in-1 tank","2101"="Low battery, charging before continuing","2108"="Relocating","2109"="Repeat cleaning in progress","2110"="Self-checking"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot when zone, point or manual control cleaning is started. Value mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember mapMemory map switch of the Mi Home app.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot read by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot read by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. The Mi Home app sends 1 to 4 while a direction key is pressed, 5 when it is released and 10 when the remote control page is opened or closed. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap availableOn when the robot has a saved (remembered) map.
has-newmapSwitchNew mapOn when the robot found a new map; the Mi Home app then asks to save, replace or discard it (see the actions).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI FIERCE-UV (viomi.vacuum.v20) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI ALPHA-UV (viomi.vacuum.v21) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI Alpha 2 Pro (viomi.vacuum.v22) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI V3 Max (viomi.vacuum.v23) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI 5G IOT LingLi 2 (viomi.vacuum.v24) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI X3 (viomi.vacuum.v25) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsStart cleaning sends the room cleaning command of the Mi Home app without rooms (whole area); it also resumes a paused run. Point and zone cleaning: write target-point or zone-points first, then send the start action. Save, replace or discard the new map is the answer to the new map question of the app (see has-newmap). Create a new map, Clean rooms in order and the voice pack download exist on newer models and firmware only. Map editing (rooms, virtual walls, restricted areas), saved map selection, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","start-sweep-walls"="Start cleaning along walls","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","save-new-map"="Save the new map","replace-saved-map"="Replace the saved map with the new map","discard-new-map"="Discard the new map","create-new-map"="Create a new map","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
room-clean-queueStringClean rooms in orderCleans the rooms in the given order, ids separated by a comma (for example 3,1,2), as the room customization of the Mi Home app. Only on newer models and firmware.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError and status texts of the Mi Home app; codes without text are shown as number. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery level too low","503"="Dust box or 2-in-1 tank not installed","507"="Relocation failed","508"="Started on a slope","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","515"="Charging error, clean the charging contacts","516"="Temperature error","517"="System updating","518"="Battery level insufficient","521"="Water tank not installed","522"="Mop not installed","527"="Remove the mop","528"="Paused, dust box or 2-in-1 tank missing","529"="Paused, install mop and water tank","530"="Paused, install 2-in-1 tank and mop","531"="Paused, install 2-in-1 tank","2101"="Low battery, charging before continuing","2108"="Relocating","2109"="Repeat cleaning in progress","2110"="Self-checking"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot when zone, point or manual control cleaning is started. Value mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember mapMemory map switch of the Mi Home app.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot read by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot read by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. The Mi Home app sends 1 to 4 while a direction key is pressed, 5 when it is released and 10 when the remote control page is opened or closed. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap availableOn when the robot has a saved (remembered) map.
has-newmapSwitchNew mapOn when the robot found a new map; the Mi Home app then asks to save, replace or discard it (see the actions).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI Alpha 2 Plus (viomi.vacuum.v27) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI Eagle (viomi.vacuum.v29) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi V2 Max (viomi.vacuum.v35) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsStart cleaning sends the room cleaning command of the Mi Home app without rooms (whole area); it also resumes a paused run. Point and zone cleaning: write target-point or zone-points first, then send the start action. Save, replace or discard the new map is the answer to the new map question of the app (see has-newmap). Create a new map, Clean rooms in order and the voice pack download exist on newer models and firmware only. Map editing (rooms, virtual walls, restricted areas), saved map selection, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","start-sweep-walls"="Start cleaning along walls","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","save-new-map"="Save the new map","replace-saved-map"="Replace the saved map with the new map","discard-new-map"="Discard the new map","create-new-map"="Create a new map","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
room-clean-queueStringClean rooms in orderCleans the rooms in the given order, ids separated by a comma (for example 3,1,2), as the room customization of the Mi Home app. Only on newer models and firmware.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError and status texts of the Mi Home app; codes without text are shown as number. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery level too low","503"="Dust box or 2-in-1 tank not installed","507"="Relocation failed","508"="Started on a slope","509"="Cliff sensor error","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","515"="Charging error, clean the charging contacts","516"="Temperature error","517"="System updating","518"="Battery level insufficient","521"="Water tank not installed","522"="Mop not installed","527"="Remove the mop","528"="Paused, dust box or 2-in-1 tank missing","529"="Paused, install mop and water tank","530"="Paused, install 2-in-1 tank and mop","531"="Paused, install 2-in-1 tank","2101"="Low battery, charging before continuing","2108"="Relocating","2109"="Repeat cleaning in progress","2110"="Self-checking"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot when zone, point or manual control cleaning is started. Value mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember mapMemory map switch of the Mi Home app.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot read by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot read by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. The Mi Home app sends 1 to 4 while a direction key is pressed, 5 when it is released and 10 when the remote control page is opened or closed. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap availableOn when the robot has a saved (remembered) map.
has-newmapSwitchNew mapOn when the robot found a new map; the Mi Home app then asks to save, replace or discard it (see the actions).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Whole area (mopping)","2"="Along walls","3"="Zone","4"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi V5 (viomi.vacuum.v36) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Zone cleaning (start-zone-clean) and map saving are used by the Mi Home app but are not in the published spec. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start or resume cleaning","pause"="Pause cleaning","stop-sweeping"="Stop cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","start-all-clean"="Start cleaning all rooms","start-all-clean-walls"="Start cleaning all rooms along walls","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","find-device"="Locate the robot","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Start level calibration","set-new-map"="Create a new map","save-map-to-cloud"="Save the new map"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Repeat cleaning","9"="Error","10"="Relocating"]
faultNumberErrorError texts of the Mi Home app; 201, 202 and 207 are only in the spec. Value mapping ["0"="No error","20"="No error (code 20)","201"="Left wheel hanging","202"="Right wheel hanging","203"="Left wheel stuck","204"="Right wheel stuck","205"="Main brush stuck","206"="Side brush stuck","207"="Charging error","208"="Started at a cliff","209"="Collision sensor stuck","210"="Vacuum fan error","211"="Two-in-one water tank not installed","212"="Mop not mounted","213"="Robot lifted up","214"="Robot trapped","215"="Laser cover blocked","216"="Laser sensor blocked","217"="Wall sensor error","218"="Started in restricted area","219"="Target area unreachable","220"="Laser head error","221"="Recharge failed","222"="Water pump not working","223"="Robot tilted","224"="Dust bag full","225"="Dust bag not installed","226"="Dust station fan error"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Custom uses the per room settings made in the app. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop","3"="Custom"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot. Value mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Remote control"]
cleaning-scopeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning. Value mapping ["0"="Selected rooms","1"="All rooms","2"="Selected areas"]
box-typeNumberInstalled boxThe spec calls this property door-state, the Mi Home app code calls it box_type but does not poll it for this model. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Two-in-one box"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app code calls it mop_type (1 = mop cloth) but does not poll it for this model.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run (s_time in the Mi Home app).
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run (s_area in the Mi Home app).
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10). The spec calls it mute.
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
carpet-pressSwitchCarpet boostIncreased suction on carpets.
cleantimesNumberCleaning passesWrite only; the Mi Home app sets it before starting a cleaning.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Remote control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC). Not polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-timeNumber:TimeLast clean durationNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-areaNumber:AreaLast clean areaNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-modeNumberLast clean modeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-map-idNumberCurrent map id
has-mapSwitchMap availableThe robot has a saved (remembered) map.
has-newmapNumberNew mapA new map was created and the Mi Home app asks whether to keep it. Value mapping ["0"="None","1"="New map","2"="Overwrite map"]
clean-map-stateSwitchMap ready to saveON when a finished cleaning map can be saved (the Mi Home app then asks to save it).
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en, de), sent as typed.
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersWrite only. JSON list of zones, each text holding eight comma separated map coordinates (four corners), for example ["x1,y1,x2,y2,x3,y3,x4,y4"]; send the action start-zone-clean afterwards.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as comma separated text; schedules can not be changed from here.

Viomi Alpha Lite (viomi.vacuum.v37) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

Viomi V5 Pro (viomi.vacuum.v38) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Custom cleaning uses the room settings saved with the Mi Home app. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start or resume cleaning","pause"="Pause cleaning","stop-sweeping"="Stop cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","start-all-clean"="Start cleaning all rooms","start-all-clean-walls"="Start cleaning all rooms along walls","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","start-custom-clean"="Start custom cleaning","find-device"="Locate the robot","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Start level calibration","set-new-map"="Create a new map"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Repeat cleaning"]
faultNumberErrorError texts of the Mi Home app. Code 20 is an error for the v40 app; the v38 app treats it as no error. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning","32"="Left wheel stuck","33"="Right wheel stuck","34"="Air duct blocked"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Custom uses the per room settings made in the app. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop","3"="Custom"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot. Value mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Remote control"]
cleaning-scopeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning. Value mapping ["0"="Selected rooms","1"="All rooms","2"="Selected areas"]
box-typeNumberInstalled boxThe spec calls this property door-state, the Mi Home app code calls it box_type but does not poll it for this model. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Two-in-one box"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app code calls it mop_type (1 = mop cloth) but does not poll it for this model.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run (s_time in the Mi Home app).
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run (s_area in the Mi Home app).
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10). The spec calls it mute.
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run. The Mi Home app of this model does not show the switch but still reads the value.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station; the Mi Home app shows the switch for the v40 only.
cleantimesNumberCleaning passesWrite only; the Mi Home app sets it (1 or 2) before starting a cleaning.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Remote control. The Mi Home app sends 10 when it opens and closes its remote control page (not in the spec), repeats the direction every 1.3 s while a key is pressed and sends 5 on release. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC). Not polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-timeNumber:TimeLast clean durationNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-areaNumber:AreaLast clean areaNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-modeNumberLast clean modeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-map-idNumberCurrent map id
has-mapSwitchMap availableThe robot has a saved (remembered) map.
has-newmapNumberNew mapA new map was created and the Mi Home app asks whether to keep it. Value mapping ["0"="None","1"="New map","2"="Overwrite map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
cur-voiceStringVoice packKey of the installed voice pack as reported by the robot (the Mi Home app compares it with the packs it offers). Voice pack download needs several inputs and is not available.
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en, de), sent as typed.
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset); the app corrects the value when it differs from the phone.
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersWrite only. JSON list of zones, each text holding eight comma separated map coordinates (four corners), for example ["x1,y1,x2,y2,x3,y3,x4,y4"]; send the action start-zone-clean afterwards.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as comma separated text; schedules can not be changed from here.

Viomi Alpha 2 Pro(WH) (viomi.vacuum.v40) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Custom cleaning uses the room settings saved with the Mi Home app. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start or resume cleaning","pause"="Pause cleaning","stop-sweeping"="Stop cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","start-all-clean"="Start cleaning all rooms","start-all-clean-walls"="Start cleaning all rooms along walls","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","start-custom-clean"="Start custom cleaning","find-device"="Locate the robot","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Start level calibration","set-new-map"="Create a new map"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Repeat cleaning"]
faultNumberErrorError texts of the Mi Home app. Code 20 is an error for the v40 app; the v38 app treats it as no error. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning","32"="Left wheel stuck","33"="Right wheel stuck","34"="Air duct blocked"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Custom uses the per room settings made in the app. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop","3"="Custom"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area and Along walls; the other values are set by the robot. Value mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Remote control"]
cleaning-scopeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning. Value mapping ["0"="Selected rooms","1"="All rooms","2"="Selected areas"]
box-typeNumberInstalled boxThe spec calls this property door-state, the Mi Home app code calls it box_type but does not poll it for this model. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Two-in-one box"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app code calls it mop_type (1 = mop cloth) but does not poll it for this model.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run (s_time in the Mi Home app).
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run (s_area in the Mi Home app).
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10). The spec calls it mute.
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run. The Mi Home app of this model does not show the switch but still reads the value.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station; the Mi Home app shows the switch for the v40 only.
cleantimesNumberCleaning passesWrite only; the Mi Home app sets it (1 or 2) before starting a cleaning.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Remote control. The Mi Home app sends 10 when it opens and closes its remote control page (not in the spec), repeats the direction every 1.3 s while a key is pressed and sends 5 on release. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC). Not polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-timeNumber:TimeLast clean durationNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-areaNumber:AreaLast clean areaNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-modeNumberLast clean modeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-map-idNumberCurrent map id
has-mapSwitchMap availableThe robot has a saved (remembered) map.
has-newmapNumberNew mapA new map was created and the Mi Home app asks whether to keep it. Value mapping ["0"="None","1"="New map","2"="Overwrite map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
cur-voiceStringVoice packKey of the installed voice pack as reported by the robot (the Mi Home app compares it with the packs it offers). Voice pack download needs several inputs and is not available.
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en, de), sent as typed.
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset); the app corrects the value when it differs from the phone.
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersWrite only. JSON list of zones, each text holding eight comma separated map coordinates (four corners), for example ["x1,y1,x2,y2,x3,y3,x4,y4"]; send the action start-zone-clean afterwards.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as comma separated text; schedules can not be changed from here.

Viomi Alpha 2 Max (viomi.vacuum.v41) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start cleaning","stop-sweeping"="Stop cleaning","pause"="Pause cleaning","start-charge"="Go to dock","stop-charge"="Stop charging","find-device"="Locate the robot","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Calibrate"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeValue mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Manual control"]
swept-area-typeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning; only used by newer firmware. Value mapping ["0"="Selected rooms","1"="Whole area","2"="Partial area"]
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app uses it as mop type (1 = mop cloth installed).
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (off) to 10; the Mi Home app shows it as percent (level x 10).
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="S pattern","1"="Y pattern"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run.
remember-stateSwitchRemember map
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Manual control. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersEight comma separated map coordinates (four corner points); send the action start-zone-clean afterwards.
map-numNumberSaved maps
cur-map-idNumberCurrent map id
has-mapSwitchMap available
has-newmapNumberNew mapThe Mi Home app asks to save the new map when this is above 0. Value mapping ["0"="No new map","1"="New map, not saved yet","2"="New map replaces the saved map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC).
last-clean-timeNumber:TimeLast clean duration
last-clean-areaNumber:AreaLast clean area
last-clean-modeNumberLast clean modeValue mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-langStringVoice languageLanguage code as used by the Mi Home app, sent as typed.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as JSON text; schedules can not be changed from here.

VIOMI Auto Cleaning Alpha 3 (viomi.vacuum.v45) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsThe Mi Home app has no separate stop: pause the cleaning and send the robot to the dock. Start sends the room cleaning command of the app without rooms (whole area). Zone cleaning: set the zone with the channel set-zone, then start it here. Point cleaning: start it with the channel spot-clean. The options here pause or resume zone and point cleaning. Not available (several values or structured data needed): saved map selection, map rename or delete, room split, merge and rename, virtual walls, room settings, schedules and voice pack download. Value mapping ["start-sweep"="Start or resume cleaning","start-sweep-walls"="Start cleaning along walls","pause"="Pause cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start or resume zone cleaning","pause-zone-clean"="Pause zone cleaning","wash-mop"="Wash the mop","dry-mop"="Start drying the mop","stop-wash-dry"="Stop mop washing or drying","reset-main-brush"="Reset main brush life","reset-side-brush"="Reset side brush life","reset-dust-filter"="Reset dust box filter life","reset-mop"="Reset mop life","build-map"="Start quick mapping","reset-map"="Reset the saved map","set-calibration"="Level the robot"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
spot-cleanStringClean spotStarts point cleaning at the map coordinates x,y (as sent by the Mi Home app).
set-zoneStringSet cleaning zoneSets the zone to clean as eight comma separated map coordinates (four corner points) x1,y1,x2,y2,x3,y3,x4,y4, as sent by the Mi Home app. Start the cleaning with start-zone-clean of the vacuumaction channel.
cleaning-planNumberCleaning planWrite only. Selects the room or floor type customization made in the Mi Home app for the next cleaning; the settings themselves can not be changed here. Value mapping ["0"="Regular cleaning","1"="Custom by room","2"="Custom by floor type"]
statusNumberStatusThe Mi Home app shows status 5 to 7 as working. Value mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Upgrading","9"="Washing the mop","10"="Drying the mop"]
faultNumberErrorError and status texts of the Mi Home app; codes without text in the app (for example 529, 530, 550, 559, 561, 564, 566, 612) are shown as number. Codes from 2100 are progress messages. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery too low","503"="Dust box not installed","508"="Started on a slope","509"="Cliff sensor dirty","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","518"="Battery too low to start, wait for charging","521"="Water tank not installed","522"="Mop not installed","533"="Standby too long, switching off","534"="Battery low, switching off","560"="Side brush stuck","563"="Dust box not installed properly","572"="Restricted zone or virtual wall detected","581"="Clean water tank empty","582"="Dirty water tank full","583"="Clean water tank not installed","584"="Dirty water tank not installed","585"="Dirty water filter not installed","586"="Cleaning trough full","587"="Base station communication error","588"="Robot may be on a carpet","589"="Relocation failed, move the robot to the dock and rebuild the map","611"="Relocation failed","2007"="Target area unreachable","2012"="Some areas unreachable","2013"="Not started from the dock, return to the dock to wash the mop","2015"="Mop washing in progress, try again later","2017"="Map building failed","2100"="Resuming cleaning after charging","2101"="Charging, cleaning will resume","2105"="Battery full","2108"="Relocating","2109"="Second cleaning pass","2110"="Self-checking","2111"="Generating map","2112"="Building map","2114"="Cleaned for 15 hours, empty the dust box"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area, Along walls and Remote control; the other values are set by the robot when zone, point cleaning or mapping is started. Value mapping ["0"="Whole area","1"="Mopping","2"="Along walls","3"="Zone","4"="Point","5"="Remote control","6"="Mapping"]
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="Standard (S pattern)","1"="Professional (Y pattern)"]
repeat-stateSwitchRepeat cleaningCleans a second time; the Mi Home app switches it off again after one run.
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property cloth-state; ON when the mop cloth is installed.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (voice off) to 10; the Mi Home app shows it as percent (level x 10).
manual-controlNumberManual controlWrite only. Set the cleaning mode to Remote control first. The Mi Home app repeats the direction while the key is pressed and does not offer backward outside China. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
carpet-boosterSwitchCarpet boostIncreased suction when a carpet is recognized.
carpet-avoidSwitchCarpet avoidanceWrite only (the Mi Home app reads it from the multi-prop-vacuum list, index 12). Avoids carpets instead of cleaning them.
carpet-showSwitchShow carpets on mapWrite only (index 22 of multi-prop-vacuum).
vibration-mopSwitchVibration moppingVibrating mop mode of the Mi Home app.
vibration-levelNumberVibration levelValue mapping ["1"="Low","2"="Medium","3"="High"]
dnd-pause-dryingSwitchPause mop drying in Do not disturbON suspends the mop drying during the do not disturb period (the spec labels the values Pause and Start; the Mi Home app uses 1 for suspend).
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth life
mop-hoursNumber:TimeMop cloth time left
map-numNumberSaved maps
cur-map-idNumberCurrent map id
build-mapNumberMapping stateThe spec lists 0, 1 and 3; the Mi Home app uses 0, 1 and 2 (mapping, mapping and cleaning). Value mapping ["0"="Not mapping","1"="Mapping","2"="Mapping and cleaning","3"="Cleaning"]
has-newmapSwitchNew mapON when a new map waits to be saved or renamed in the Mi Home app.
target-pointStringPoint cleaning targetMap coordinates of the point cleaning target. To start point cleaning use spot-clean.
stop-map-uploadSwitchStop map uploadWrite only (index 18 of multi-prop-vacuum). ON stops the upload of map data and, as the Mi Home app warns, deactivates the map functions and clears the map data. Shown by the Mi Home app for accounts outside China only.
order-countStringCleaning schedulesJSON list with the number of schedules and the number of enabled schedules, for example [3,2]. Schedules can not be changed from here.
dnd-enableSwitchDo not disturbRead only: the Mi Home app writes enable, start, end and time zone together with one action that needs all six values.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset, for example -3600 for UTC+1).
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en_US, de_DE, zh_CN), sent as typed.
ai-recognizeSwitchAI recognitionAI object recognition switch of the Mi Home app.
multi-prop-vacuumStringSettings listJSON list of the settings the Mi Home app polls, by index: 0 repeat cleaning, 1 box type, 2 mop installed, 3 suction, 4 water level, 5 mop pattern, 6 time zone, 7 cleaning time, 8 cleaning area, 9 carpet boost, 10 cleaning plan, 11 language, 12 carpet avoidance, 18 stop map upload, 19 vibration mopping, 20 vibration level, 21 electrolysis, 22 show carpets, 23 station action, 27 pause drying in do not disturb, 29 mop wash interval area. Use it to read the write only settings.

Viomi Alpha 3 Pro (viomi.vacuum.v49) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsThe Mi Home app has no separate stop: pause the cleaning and send the robot to the dock. Start sends the room cleaning command of the app without rooms (whole area). Zone cleaning: set the zone with the channel set-zone, then start it here. Point cleaning: start it with the channel spot-clean. The options here pause or resume zone and point cleaning. Not available (several values or structured data needed): saved map selection, map rename or delete, room split, merge and rename, virtual walls, room settings, schedules and voice pack download. Value mapping ["start-sweep"="Start or resume cleaning","start-sweep-walls"="Start cleaning along walls","pause"="Pause cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start or resume zone cleaning","pause-zone-clean"="Pause zone cleaning","wash-mop"="Wash the mop","dry-mop"="Start drying the mop","stop-wash-dry"="Stop mop washing or drying","dust-collection"="Empty the dust box","reset-main-brush"="Reset main brush life","reset-side-brush"="Reset side brush life","reset-dust-filter"="Reset dust box filter life","reset-mop"="Reset mop life","build-map"="Start quick mapping","reset-map"="Reset the saved map","set-calibration"="Level the robot"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
spot-cleanStringClean spotStarts point cleaning at the map coordinates x,y (as sent by the Mi Home app).
set-zoneStringSet cleaning zoneSets the zone to clean as eight comma separated map coordinates (four corner points) x1,y1,x2,y2,x3,y3,x4,y4, as sent by the Mi Home app. Start the cleaning with start-zone-clean of the vacuumaction channel.
cleaning-planNumberCleaning planWrite only. Selects the room or floor type customization made in the Mi Home app for the next cleaning; the settings themselves can not be changed here. Value mapping ["0"="Regular cleaning","1"="Custom by room","2"="Custom by floor type"]
statusNumberStatusThe Mi Home app shows status 5 to 7 as working. Value mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Upgrading","9"="Washing the mop","10"="Drying the mop","11"="Collecting dust","12"="Returning to dock to resume cleaning","13"="Charging to resume cleaning"]
faultNumberErrorError and status texts of the Mi Home app; codes without text in the app (for example 529, 530, 550, 559, 561, 564, 566, 612) are shown as number. Codes from 2100 are progress messages. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery too low","503"="Dust box not installed","508"="Started on a slope","509"="Cliff sensor dirty","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","518"="Battery too low to start, wait for charging","521"="Water tank not installed","522"="Mop not installed","533"="Standby too long, switching off","534"="Battery low, switching off","560"="Side brush stuck","563"="Dust box not installed properly","572"="Restricted zone or virtual wall detected","581"="Clean water tank empty","582"="Dirty water tank full","583"="Clean water tank not installed","584"="Dirty water tank not installed","585"="Dirty water filter not installed","586"="Cleaning trough full","587"="Base station communication error","588"="Robot may be on a carpet","589"="Relocation failed, move the robot to the dock and rebuild the map","594"="Dust bag not installed","611"="Relocation failed","625"="Cleaning bracket not installed","2007"="Target area unreachable","2012"="Some areas unreachable","2013"="Not started from the dock, return to the dock to wash the mop","2015"="Mop washing in progress, try again later","2017"="Map building failed","2100"="Resuming cleaning after charging","2101"="Charging, cleaning will resume","2105"="Battery full","2108"="Relocating","2109"="Second cleaning pass","2110"="Self-checking","2111"="Generating map","2112"="Building map","2114"="Cleaned for 15 hours, empty the dust box"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeValue mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area, Along walls and Remote control; the other values are set by the robot when zone, point cleaning or mapping is started. Value mapping ["0"="Whole area","1"="Mopping","2"="Along walls","3"="Zone","4"="Point","5"="Remote control","6"="Mapping"]
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
mop-routeNumberMopping patternValue mapping ["0"="Standard (S pattern)","1"="Professional (Y pattern)"]
repeat-stateSwitchRepeat cleaningCleans a second time; the Mi Home app switches it off again after one run.
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property cloth-state; ON when the mop cloth is installed.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (voice off) to 10; the Mi Home app shows it as percent (level x 10).
manual-controlNumberManual controlWrite only. Set the cleaning mode to Remote control first. The Mi Home app repeats the direction while the key is pressed and does not offer backward outside China. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
carpet-boosterSwitchCarpet boostIncreased suction when a carpet is recognized.
carpet-avoidSwitchCarpet avoidanceWrite only (the Mi Home app reads it from the multi-prop-vacuum list, index 12). Avoids carpets instead of cleaning them.
carpet-showSwitchShow carpets on mapWrite only (index 22 of multi-prop-vacuum).
sweep-avoidSwitchCarpet avoidance when vacuumingWrite only (index 30 of multi-prop-vacuum). Used by the Mi Home app on firmware with separate carpet avoidance for vacuuming and mopping.
mop-avoidSwitchCarpet avoidance when moppingWrite only (index 31 of multi-prop-vacuum).
vibration-mopSwitchVibration moppingVibrating mop mode of the Mi Home app.
vibration-levelNumberVibration levelValue mapping ["1"="Low","2"="Medium","3"="High"]
electrolysisSwitchWater electrolysisElectrolyzed water for mopping. The Mi Home app only enables it with the 2-in-1 box installed and tells not to add detergent.
dnd-pause-dryingSwitchPause mop drying in Do not disturbON suspends the mop drying during the do not disturb period (the spec labels the values Pause and Start; the Mi Home app uses 1 for suspend).
auto-dust-collectionSwitchAuto dust collectionEmpties the dust box into the station automatically.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth life
mop-hoursNumber:TimeMop cloth time left
map-numNumberSaved maps
cur-map-idNumberCurrent map id
build-mapNumberMapping stateThe spec lists 0, 1 and 3; the Mi Home app uses 0, 1 and 2 (mapping, mapping and cleaning). Value mapping ["0"="Not mapping","1"="Mapping","2"="Mapping and cleaning","3"="Cleaning"]
has-newmapSwitchNew mapON when a new map waits to be saved or renamed in the Mi Home app.
target-pointStringPoint cleaning targetMap coordinates of the point cleaning target. To start point cleaning use spot-clean.
order-countStringCleaning schedulesJSON list with the number of schedules and the number of enabled schedules, for example [3,2]. Schedules can not be changed from here.
dnd-enableSwitchDo not disturbRead only: the Mi Home app writes enable, start, end and time zone together with one action that needs all six values.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset, for example -3600 for UTC+1).
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en_US, de_DE, zh_CN), sent as typed.
ai-recognizeSwitchAI recognitionAI object recognition switch of the Mi Home app.
multi-prop-vacuumStringSettings listJSON list of the settings the Mi Home app polls, by index: 0 repeat cleaning, 1 box type, 2 mop installed, 3 suction, 4 water level, 5 mop pattern, 6 time zone, 7 cleaning time, 8 cleaning area, 9 carpet boost, 10 cleaning plan, 11 language, 12 carpet avoidance, 19 vibration mopping, 20 vibration level, 21 electrolysis, 22 show carpets, 23 station action, 27 pause drying in do not disturb, 29 mop wash interval area, 30 and 31 carpet avoidance when vacuuming and mopping, 32 auto dust collection. Use it to read the write only settings.

Viomi Alpha 2 Lite (viomi.vacuum.v53) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Custom cleaning uses the room settings saved with the Mi Home app. start-fast-mapping overwrites the saved map and needs the robot on the dock. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start or resume cleaning","pause"="Pause cleaning","stop-sweeping"="Stop cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","start-all-clean"="Start cleaning all rooms","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","start-custom-clean"="Start custom cleaning","find-device"="Locate the robot","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-calibration"="Start level calibration","set-new-map"="Create a new map","start-fast-mapping"="Start quick mapping"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValue mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Repeat cleaning"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning","32"="Left wheel stuck","33"="Right wheel stuck","34"="Air duct blocked","35"="Mop not installed, switched to vacuum only","36"="Dust station fan error, check for leaks"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Custom uses the per room settings made in the app. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop","3"="Custom"]
cleaning-modeNumberCleaning modeThe Mi Home app of this model has no along walls switch and only reads the value; it is set by the robot. Value mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Remote control"]
cleaning-scopeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning. Value mapping ["0"="Selected rooms","1"="All rooms","2"="Selected areas"]
box-typeNumberInstalled boxThe spec calls this property door-state, the Mi Home app code calls it box_type but does not poll it for this model. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Two-in-one box"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app code calls it mop_type (1 = mop cloth) but does not poll it for this model.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run (s_time in the Mi Home app).
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run (s_area in the Mi Home app).
muteSwitchMuteON silences the robot voice. The spec calls this property mute and the Mi Home app v_state; it writes true to mute and false to unmute.
volumeNumberVolumeVolume level 1 to 10; the Mi Home app shows it as percent (level x 10) and writes it as mute_num.
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Medium","3"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run. The Mi Home app of this model does not show the switch but still reads the value.
remember-stateSwitchRemember map
carpet-pressSwitchCarpet boostIncreased suction on carpets.
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station; the Mi Home app shows the switch for the v53.
fast-mapping-buttonSwitchQuick mappingQuick mapping switch of the Mi Home main page: when ON the next whole house cleaning only explores and maps the rooms. The app refuses it when the maximum number of maps is stored.
fast-mapping-statusNumberQuick mapping statusPolled by the Mi Home app; the labels come from the spec, the meaning of the two finished values is not confirmed. Value mapping ["0"="Off","1"="Mapping","2"="Finished, main page","3"="Finished, settings page"]
cleantimesNumberCleaning passesWrite only; the Mi Home app sets it (1 or 2) before starting a cleaning.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Remote control. The Mi Home app sends 10 when it opens and closes its remote control page (not in the spec), repeats the direction every 1.3 s while a key is pressed and sends 5 on release. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC). Not polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-timeNumber:TimeLast clean durationNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-areaNumber:AreaLast clean areaNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-modeNumberLast clean modeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point"]
last-clean-typeNumberLast clean typeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-map-idNumberCurrent map id
has-mapSwitchMap availableThe robot has a saved (remembered) map.
has-newmapNumberNew mapA new map was created and the Mi Home app asks whether to keep it. Value mapping ["0"="None","1"="New map","2"="Overwrite map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
map-numNumberSaved mapsNumber of maps stored in the robot; the Mi Home app uses it to limit quick mapping and new maps.
cur-voiceStringVoice packKey of the installed voice pack as reported by the robot (the Mi Home app compares it with the packs it offers). Voice pack download needs several inputs and is not available.
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en, de), sent as typed.
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset); the app corrects the value when it differs from the phone.
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersWrite only. JSON list of zones, each text holding eight comma separated map coordinates (four corners), for example ["x1,y1,x2,y2,x3,y3,x4,y4"]; send the action start-zone-clean afterwards.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as comma separated text; schedules can not be changed from here.

Viomi V3 Absolut (viomi.vacuum.v56) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsPoint and zone cleaning: write target-point or zone-points first, then send the start action. Custom cleaning uses the room settings saved with the Mi Home app. start-fast-mapping overwrites the saved map and needs the robot on the dock. Map editing, saved map selection, room split / merge / rename, schedules and voice pack download need several inputs and are not available. Value mapping ["start-sweep"="Start or resume cleaning","pause"="Pause cleaning","stop-sweeping"="Stop cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","start-all-clean"="Start cleaning all rooms","start-point-clean"="Start point cleaning","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start zone cleaning","pause-zone-clean"="Pause zone cleaning","start-custom-clean"="Start custom cleaning","find-device"="Locate the robot","reset-side-brush"="Reset side brush life","reset-main-brush"="Reset main brush life","reset-dust-filter"="Reset dust box filter life","reset-map"="Clear the saved map","set-new-map"="Create a new map","start-fast-mapping"="Start quick mapping"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
statusNumberStatusValues 9 and 10 are only listed by the spec; the Mi Home app does not know them. Value mapping ["0"="Sleeping","1"="Standby","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Repeat cleaning","9"="Returning to dock (status 9)","10"="Charging (status 10)"]
faultNumberErrorError texts of the Mi Home app. Value mapping ["0"="No error","1"="Low battery, searching dock","2"="Low battery, shutting down","3"="Main wheel stuck","4"="Collision sensor stuck","5"="Machine tilted","6"="Lidar blocked","7"="Front collision sensor error","8"="Wall sensor error","9"="Main brush stuck","10"="Side brush stuck","11"="Fan error","12"="Lidar cover stuck","13"="Dust box needs cleaning","14"="Two-in-one water tank not installed","15"="Dust box full, please empty it","16"="Robot trapped","17"="Robot picked up","18"="Water tank not installed","19"="Water tank empty, please add water","20"="Destination unreachable","21"="Start from restricted zone","22"="Cliff detected","23"="Water pump error","24"="Recharge failed","25"="Mop not installed","26"="Battery too low to start cleaning","27"="Dust bag not in place","28"="Dust collector fan failure","29"="Dust bag full","30"="Dust collection in progress, wait before cleaning","32"="Left wheel stuck","33"="Right wheel stuck","34"="Air duct blocked","35"="Mop not installed, switched to vacuum only","36"="Dust station fan error, check for leaks","37"="Lidar stuck"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property wdr-mode, the Mi Home app uses it as cleaning type (is_mop). Custom uses the per room settings made in the app. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop","3"="Custom"]
cleaning-modeNumberCleaning modeThe Mi Home app of this model has no along walls switch and only reads the value; it is set by the robot. Value mapping ["0"="Whole area","2"="Along walls","3"="Zone","4"="Point","5"="Remote control"]
cleaning-scopeNumberCleaning scopeScope the Mi Home app remembers for the next cleaning. Value mapping ["0"="Selected rooms","1"="All rooms","2"="Selected areas"]
box-typeNumberInstalled boxThe spec calls this property door-state, the Mi Home app code calls it box_type but does not poll it for this model. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="Two-in-one box"]
mop-installedSwitchMop installedThe spec calls this property contact-state, the Mi Home app code calls it mop_type (1 = mop cloth) but does not poll it for this model.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run (s_time in the Mi Home app).
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run (s_area in the Mi Home app).
muteSwitchMuteON silences the robot voice. The spec calls this property mute and the Mi Home app v_state; it writes true to mute and false to unmute.
volumeNumberVolumeVolume level 1 to 10; the Mi Home app shows it as percent (level x 10) and writes it as mute_num.
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Standard","2"="Strong"]
water-gradeNumberWater levelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
repeat-stateSwitchRepeat cleaningRepeat the cleaning once; switches off after one run. The Mi Home app of this model does not show the switch but still reads the value.
remember-stateSwitchRemember map
carpet-pressSwitchCarpet boostIncreased suction on carpets.
dust-collectionSwitchAuto dust collectionOnly for models with a dust collection station; the Mi Home app of the v56 does not show the switch.
fast-mapping-buttonSwitchQuick mappingQuick mapping switch of the Mi Home main page: when ON the next whole house cleaning only explores and maps the rooms. The app refuses it when the maximum number of maps is stored.
fast-mapping-statusNumberQuick mapping statusPolled by the Mi Home app; the labels come from the spec, the meaning of the two finished values is not confirmed. Value mapping ["0"="Off","1"="Mapping","2"="Finished, main page","3"="Finished, settings page"]
cleantimesNumberCleaning passesWrite only; the Mi Home app sets it (1 or 2) before starting a cleaning.
manual-controlNumberManual controlWrite only. Use with the cleaning mode Remote control. The Mi Home app sends 10 when it opens and closes its remote control page (not in the spec), repeats the direction every 1.3 s while a key is pressed and sends 5 on release. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop","10"="Start or end remote control"]
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth lifeNot shown by the Mi Home app; the mop cloth has no reset action.
mop-hoursNumber:TimeMop cloth time leftNot shown by the Mi Home app; the mop cloth has no reset action.
last-clean-startNumberLast clean startSeconds since 1970-01-01 (UTC). Not polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-timeNumber:TimeLast clean durationNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-areaNumber:AreaLast clean areaNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot.
last-clean-modeNumberLast clean modeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Whole area","1"="Along walls","2"="Zone","3"="Point","4"="Custom"]
last-clean-typeNumberLast clean typeNot polled by the Mi Home app, which uses the cloud event clean_end; value as published by the robot. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop"]
cur-map-idNumberCurrent map id
has-mapSwitchMap availableThe robot has a saved (remembered) map.
has-newmapNumberNew mapA new map was created and the Mi Home app asks whether to keep it. Value mapping ["0"="None","1"="New map","2"="Overwrite map"]
last-update-timeNumberMap updatedSeconds since 1970-01-01 (UTC).
map-numNumberSaved mapsNumber of maps stored in the robot; the Mi Home app uses it to limit quick mapping and new maps.
cur-voiceStringVoice packKey of the installed voice pack as reported by the robot (the Mi Home app compares it with the packs it offers). Voice pack download needs several inputs and is not available.
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en, de), sent as typed.
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset); the app corrects the value when it differs from the phone.
target-pointStringPoint cleaning targetMap coordinates x,y; send the action start-point-clean afterwards.
zone-pointsStringZone cleaning cornersWrite only. JSON list of zones, each text holding eight comma separated map coordinates (four corners), for example ["x1,y1,x2,y2,x3,y3,x4,y4"]; send the action start-zone-clean afterwards.
dnd-enableSwitchDo not disturbThe Mi Home app writes the enable, start, end and time zone values together.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
dnd-timezoneNumber:TimeDo not disturb time zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset).
orderdataStringCleaning scheduleSchedule list as comma separated text; schedules can not be changed from here.

Viomi Master 10 Max (viomi.vacuum.v60) Channels ​

ChannelTypeDescriptionComment
vacuumactionStringActionsThe Mi Home app has no separate stop: pause the cleaning and send the robot to the dock. Start sends the room cleaning command of the app without rooms (whole area). Zone cleaning: set the zone with the channel set-zone, then start it here. Point cleaning: start it with the channel spot-clean. The options here pause or resume zone and point cleaning. Not available (several values or structured data needed): saved map selection, map rename or delete, room split, merge and rename, virtual walls, room settings, schedules and voice pack download. Value mapping ["start-sweep"="Start or resume cleaning","start-sweep-walls"="Start cleaning along walls","pause"="Pause cleaning","start-charge"="Return to dock","stop-charge"="Stop returning to dock","find-device"="Locate the robot","pause-point-clean"="Pause point cleaning","start-zone-clean"="Start or resume zone cleaning","pause-zone-clean"="Pause zone cleaning","wash-mop"="Wash the mop","dry-mop"="Start drying the mop","stop-dry-mop"="Stop drying the mop","dust-collection"="Empty the dust box","reset-main-brush"="Reset main brush life","reset-side-brush"="Reset side brush life","reset-dust-filter"="Reset dust box filter life","reset-mop"="Reset mop life","build-map"="Start quick mapping","reset-map"="Reset the saved map"]
room-cleanStringClean roomsStarts cleaning of the rooms with the given ids, separated by a comma (for example 1,2), as the Mi Home app does. The room ids are the ones of the saved map.
spot-cleanStringClean spotStarts point cleaning at the map coordinates x,y (as sent by the Mi Home app).
set-zoneStringSet cleaning zoneSets the zone to clean as eight comma separated map coordinates (four corner points) x1,y1,x2,y2,x3,y3,x4,y4, as sent by the Mi Home app. Start the cleaning with start-zone-clean of the vacuumaction channel.
cleaning-planNumberCleaning planWrite only. Selects the room or floor type customization made in the Mi Home app for the next cleaning; the settings themselves can not be changed here. Value mapping ["0"="Regular cleaning","1"="Custom by room","2"="Custom by floor type"]
statusNumberStatusThe Mi Home app shows status 5 to 7 as working. Status 12 and 13 are cleaning interrupted for charging. Value mapping ["0"="Sleeping","1"="Idle","2"="Paused","3"="Returning to dock","4"="Charging","5"="Vacuuming","6"="Vacuuming and mopping","7"="Mopping","8"="Upgrading","9"="Washing the mop","10"="Drying the mop","11"="Collecting dust","12"="Returning to dock to resume cleaning","13"="Charging to resume cleaning","14"="Vacuuming after mopping","15"="Building map"]
faultNumberErrorError and status texts of the Mi Home app; codes without text in the app (for example 529, 530, 550, 559, 561, 564, 566, 612) are shown as number. Codes from 2100 are progress messages. Value mapping ["0"="No error","500"="Lidar timeout","501"="Wheels lifted","502"="Battery too low","503"="Dust box not installed","508"="Started on a slope","509"="Cliff sensor dirty","510"="Collision sensor stuck","511"="Return to dock failed, clear obstacles around the dock","512"="Return to dock failed, place the robot on the dock","513"="Navigation failed","514"="Stuck, could not get free","518"="Battery too low to start, wait for charging","521"="Water tank not installed","522"="Mop not installed","533"="Standby too long, switching off","534"="Battery low, switching off","560"="Side brush stuck","563"="Dust box not installed properly","567"="Main brush stuck (code 567)","568"="Left wheel stuck","569"="Right wheel stuck","570"="Main brush stuck","572"="Restricted zone or virtual wall detected","581"="Clean water tank empty or not installed","582"="Dirty water tank full or not installed","583"="Clean water tank not installed","584"="Dirty water tank not installed","585"="Dirty water filter not installed","586"="Cleaning trough full","587"="Base station communication error","589"="Relocation failed, move the robot to the dock and rebuild the map","591"="Dust bag may be full","594"="Dust bag not installed","597"="Dust collection too frequent","604"="Dust collection too frequent (code 604)","611"="Relocation failed","625"="Base station sewage filter not installed","630"="Mop bracket stuck","637"="Robot may be on a carpet","711"="Clean water tank empty or not installed (code 711)","712"="Dirty water tank full or not installed (code 712)","2003"="Battery too low, scheduled cleaning can not start","2007"="Target area unreachable","2012"="Some areas unreachable","2013"="Not started from the dock, return to the dock to wash the mop","2015"="Mop washing in progress, try again later","2017"="Map building failed","2100"="Resuming cleaning after charging","2101"="Charging, cleaning will resume","2105"="Battery full","2108"="Relocating","2109"="Second cleaning pass","2110"="Self-checking","2111"="Generating map","2112"="Building map","2114"="Cleaned for 15 hours, empty the dust box"]
battery-levelNumber:DimensionlessBattery
cleaning-typeNumberCleaning typeThe spec calls this property mode. Mop after vacuum cleans the floor first and mops afterwards. Value mapping ["0"="Vacuum","1"="Vacuum and mop","2"="Mop","3"="Mop after vacuum"]
cleaning-modeNumberCleaning modeThe Mi Home app only writes Whole area, Along walls and Remote control; the other values are set by the robot when zone, point cleaning or mapping is started. Value mapping ["0"="Whole area","1"="Mopping","2"="Along walls","3"="Zone","4"="Point","5"="Remote control","6"="Mapping"]
suction-gradeNumberSuction powerValue mapping ["0"="Quiet","1"="Balanced","2"="Strong","3"="Max"]
water-gradeNumberWater levelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop-routeNumberMopping patternValue mapping ["0"="Standard (S pattern)","1"="Professional (Y pattern)"]
repeat-stateSwitchRepeat cleaningCleans a second time (value 1 = clean twice).
box-typeNumberInstalled modulesThe spec calls this property door-state, the Mi Home app uses it as box type. Value mapping ["0"="None","1"="Dust box","2"="Water tank","3"="2-in-1 dust box and water tank"]
mop-installedSwitchMop installedThe spec calls this property cloth-state; ON when the mop cloth is installed.
clean-timeNumber:TimeCleaning timeDuration of the current or last cleaning run.
clean-areaNumber:AreaCleaned areaArea of the current or last cleaning run.
volumeNumberVolumeVolume level 0 (voice off) to 10; the Mi Home app shows it as percent (level x 10).
manual-controlNumberManual controlWrite only. Set the cleaning mode to Remote control first. The Mi Home app repeats the direction while the key is pressed and does not offer backward outside China. Value mapping ["1"="Forward","2"="Left","3"="Right","4"="Backward","5"="Stop"]
carpet-boosterSwitchCarpet boostIncreased suction when a carpet is recognized.
carpet-avoidSwitchCarpet avoidanceWrite only (the Mi Home app reads it from the multi-prop-vacuum list, index 12). Avoids carpets instead of cleaning them.
carpet-showSwitchShow carpets on mapWrite only (index 22 of multi-prop-vacuum).
sweep-avoidSwitchCarpet avoidance when vacuumingWrite only (index 30 of multi-prop-vacuum). Used by the Mi Home app on firmware with separate carpet avoidance for vacuuming and mopping.
mop-avoidSwitchCarpet avoidance when moppingWrite only (index 31 of multi-prop-vacuum).
vibration-mopSwitchVibration moppingVibrating mop mode of the Mi Home app.
vibration-levelNumberVibration levelValue mapping ["1"="Low","2"="Medium","3"="High"]
dnd-pause-dryingSwitchPause mop drying in Do not disturbON suspends the mop drying during the do not disturb period (the spec labels the values Pause and Start; the Mi Home app uses 1 for suspend).
auto-dust-collectionSwitchAuto dust collectionEmpties the dust box into the station automatically.
back-washSwitchReturn to wash the mop by areaThe robot returns to the station to wash the mop after the area of back-wash-area.
back-wash-areaNumberMop wash interval areaWrite only (index 29 of multi-prop-vacuum). Value mapping ["5"="5 square meters","8"="8 square meters","10"="10 square meters"]
auto-dry-mopSwitchAutomatic mop dryingDries the mop automatically after washing it at the end of cleaning.
dry-timeNumberMop drying timeWrite only (index 39 of multi-prop-vacuum). The spec allows 4 to 12 hours, the Mi Home app offers 4, 6 and 8. Value mapping ["4"="4 hours","6"="6 hours","8"="8 hours"]
dust-frequencyNumberDust collection frequencyValue mapping ["1"="After every cleaning","2"="After every 2 cleanings","3"="After every 3 cleanings"]
mop-edgeSwitchAutomatic mop extendExtends the mop outward to reach edges.
mop-edge-frequencyNumberMop extend frequencyValue mapping ["1"="Every 7th task","2"="Every 2nd task","3"="Every task"]
clean-brushSwitchBrush self-cleaningThe robot returns to the station to clean the roller brush after cleaning.
clean-brush-frequencyNumberBrush self-cleaning frequencyValue mapping ["1"="After every cleaning","2"="After every 2 cleanings","3"="After every 3 cleanings"]
child-lockSwitchChild lockLocks the keys of the robot when it is not working.
side-brush-lifeNumber:DimensionlessSide brush life
side-brush-hoursNumber:TimeSide brush time left
main-brush-lifeNumber:DimensionlessMain brush life
main-brush-hoursNumber:TimeMain brush time left
hypa-lifeNumber:DimensionlessDust box filter life
hypa-hoursNumber:TimeDust box filter time left
mop-lifeNumber:DimensionlessMop cloth life
mop-hoursNumber:TimeMop cloth time left
map-numNumberSaved maps
cur-map-idNumberCurrent map id
build-mapNumberMapping stateThe spec lists 0, 1 and 3; the Mi Home app uses 0, 1 and 2 (mapping, mapping and cleaning). Value mapping ["0"="Not mapping","1"="Mapping","2"="Mapping and cleaning","3"="Cleaning"]
has-newmapSwitchNew mapON when a new map waits to be saved or renamed in the Mi Home app.
target-pointStringPoint cleaning targetMap coordinates of the point cleaning target. To start point cleaning use spot-clean.
order-countStringCleaning schedulesJSON list with the number of schedules and the number of enabled schedules, for example [3,2]. Schedules can not be changed from here.
dnd-enableSwitchDo not disturbRead only: the Mi Home app writes enable, start, end and time zone together with one action that needs all six values.
dnd-start-hourNumber:TimeDo not disturb start hour
dnd-start-minuteNumber:TimeDo not disturb start minute
dnd-end-hourNumber:TimeDo not disturb end hour
dnd-end-minuteNumber:TimeDo not disturb end minute
time-zoneNumber:TimeTime zone offsetOffset of the local time zone in seconds as written by the Mi Home app (minus the UTC offset, for example -3600 for UTC+1).
cur-langStringVoice languageLanguage code as used by the Mi Home app (for example en_US, de_DE, zh_CN), sent as typed.
ai-recognizeSwitchAI recognitionAI object recognition switch of the Mi Home app.
multi-prop-vacuumStringSettings listJSON list of the settings the Mi Home app polls, by index: 0 repeat cleaning, 1 box type, 2 mop installed, 3 suction, 4 water level, 5 mop pattern, 6 time zone, 7 cleaning time, 8 cleaning area, 9 carpet boost, 10 cleaning plan, 11 language, 12 carpet avoidance, 19 vibration mopping, 20 vibration level, 21 electrolysis, 22 show carpets, 23 station action, 27 pause drying in do not disturb, 29 mop wash interval area, 30 and 31 carpet avoidance when vacuuming and mopping, 32 auto dust collection, 33 child lock, 34 and 35 mop extend, 36 and 37 brush self-cleaning, 38 automatic mop drying, 39 mop drying time, 40 dust collection frequency, 41 return to wash the mop. Use it to read the write only settings.

VIOMI Internet Electric Water Heater 1A (60L) (viomi.waterheater.e1) Channels ​

ChannelTypeDescriptionComment
washStatusSwitchPower
velocityNumberWater FlowAbove 0 while hot water is used
waterTempNumber:TemperatureWater Temperature
targetTempNumber:TemperatureTarget Temperature
errStatusNumberError CodeBit field: 2 sensor open or short circuit, 3 inner tank over-temperature, 4 inner tank dry heating, 5 and 6 sensor fault, 7 dry heating fault, 9 over-temperature fault
hotWaterNumber:DimensionlessHot WaterRemaining hot water
needCleanSwitchCleaning NeededOn after 180 days of use
cleanResetStringReset Cleaning ReminderSend after cleaning the inner tank
modeTypeNumberModeValue mapping ["0"="Thermostatic","1"="Heating","2"="Booking"]
appointStartNumberBooking Start HourBooking mode heats between the start and end hour; setting it switches to booking mode
appointEndNumberBooking End HourBooking mode heats between the start and end hour; setting it switches to booking mode

VIOMI Internet electric water heater 50L(Premium Version) (viomi.waterheater.e4) Channels ​

ChannelTypeDescriptionComment
washStatusSwitchPower
velocityNumberWater FlowAbove 0 while hot water is used
waterTempNumber:TemperatureWater Temperature
targetTempNumber:TemperatureTarget Temperature
errStatusNumberError CodeBit field: 2 sensor open or short circuit, 3 inner tank over-temperature, 4 inner tank dry heating, 5 and 6 sensor fault, 7 dry heating fault, 9 over-temperature fault
hotWaterNumber:DimensionlessHot WaterRemaining hot water
needCleanSwitchCleaning NeededOn after 180 days of use
cleanResetStringReset Cleaning ReminderSend after cleaning the inner tank
modeTypeNumberModeValue mapping ["0"="Thermostatic","1"="Heating","2"="Booking"]
appointStartNumberBooking Start HourBooking mode heats between the start and end hour; setting it switches to booking mode
appointEndNumberBooking End HourBooking mode heats between the start and end hour; setting it switches to booking mode

Mi Inverter Air Conditioner (1.5HP) (xiaomi.aircondition.ma1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
sleep-modeSwitchAir Conditioner - Sleep Mode
dryerSwitchAir Conditioner - Dryer
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status

Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) (xiaomi.aircondition.ma2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
sleep-modeSwitchAir Conditioner - Sleep Mode
dryerSwitchAir Conditioner - Dryer
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status

Mi Vertical Air Conditioner (2HP) (xiaomi.aircondition.ma4) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
sleep-modeSwitchAir Conditioner - Sleep Mode
dryerSwitchAir Conditioner - Dryer
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status

Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma5) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
sleep-modeSwitchAir Conditioner - Sleep Mode
dryerSwitchAir Conditioner - Dryer
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status

Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) (xiaomi.aircondition.ma6) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
sleep-modeSwitchAir Conditioner - Sleep Mode
dryerSwitchAir Conditioner - Dryer
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status

Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma9) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
sleep-modeSwitchAir Conditioner - Sleep Mode
dryerSwitchAir Conditioner - Dryer
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc4) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc5) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc6) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc7) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc8) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc9) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c10) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c11) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mh3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt2) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt3) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt4) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt5) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt7) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt8) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
modeNumberAir Conditioner - ModeValue mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperatureNumber:TemperatureAir Conditioner - Target Temperature
ecoSwitchAir Conditioner - Eco
heaterSwitchAir Conditioner - Heater
dryerSwitchAir Conditioner - Dryer
sleep-modeSwitchAir Conditioner - Sleep Mode
fan-levelNumberFan Control - Fan LevelValue mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swingSwitchFan Control - Vertical Swing
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
on1SwitchIndicator Light - Switch Status
electricityNumber:EnergyPower consumption accumulation in kWh
elec-countNumberElectricity - Count
cleanStringMaintenance - Clean
examineStringMaintenance - Examine
running-durationNumber:TimeMaintenance - Running Duration
fan-percentNumber:DimensionlessFan Speed %
timerStringEnhance - Timer

Xiaomi Smart Air Purifier 4 Compact (xiaomi.airp.cpa4) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode"]
onSwitchPower
faultNumberAir Purifier - Device FaultValue mapping ["0"="No Faults","1"="Motor Speed Error","2"="Motor Blocked","3"="Particle Sensor Error"]
modeNumberAir Purifier - ModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_densityNumber:DensityEnvironment - PM2 5 Density
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_used_timeNumber:TimeFilter - Filter Used Time
filter_left_timeNumber:TimeFilter - Filter Left Time
alarmSwitchAlarm - Alarm
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
brightnessNumberScreen - BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
motor_speed_rpmNumberCustom Service - Motor Speed Rpm
country_codeNumberCustom Service - Country CodeValue mapping ["17230"="CN","17749"="EU","21843"="US","21576"="TH","19024"="JP","19282"="KR","21591"="TW","18766"="IN"]
favorite_levelNumberCustom Service - Favorite LevelFavorite mode speed level 0-14; the Mi Home app shows the recommended room coverage from 2-3 m2 (level 0) to 16-27 m2 (level 14)

Mijia Smart Air Purifier MAX (xiaomi.airp.mb6) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature/Humidity Sensor Error","3"="Formaldehyde Sensor Error","5"="Motor Stuck"]
modeNumberModeValue mapping ["0"="Auto","3"="Sleep","5"="Favorite","6"="Level"]
fan_levelNumberFan LevelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
uvSwitchUV Light
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
air_qualityNumberAir QualityValue mapping ["0"="Excellent","1"="Good","2"="Moderate","3"="Poor","4"="Heavy Pollution","5"="Hazardous"]
pm2_5_densityNumber:DensityPM2.5 Density
pm10_densityNumber:DensityPM10 Density
hcho_densityNumberFormaldehyde Density
pm1Number:DensityPM1 Density
filter_life_levelNumber:DimensionlessFilter Life Level
filter_left_timeNumber:TimeFilter Remaining Time
filter_used_timeNumber:TimeFilter Used Time
screen_onSwitchScreen
brightnessNumberScreen BrightnessValue mapping ["0"="Dim","1"="On","2"="Medium"]
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
favorite_levelNumberFavorite Mode Level
reboot_causeNumberReboot CauseValue mapping ["1"="Power","2"="External Pin","3"="Software","4"="Watchdog","5"="Unknown"]
motor_set_speedNumberMotor Target Speed
motor_speed_rpmNumberMotor Speed
country_codeNumberCountry CodeValue mapping ["2"="EU","1"="US","82"="KR","886"="TW","66"="TH","44"="UK","91"="IN","86"="CN","81"="JP"]

Xiaomi Smart Air Purifier Elite (xiaomi.airp.meb1) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature/Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
plasmaSwitchPlasma Ionizer
uvSwitchUV Light
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
pm10_densityNumber:DensityPM10 Density
air_qualityNumberAir QualityValue mapping ["0"="Excellent","1"="Good","2"="Moderate","3"="Poor","4"="Heavy Pollution","5"="Hazardous"]
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
favorite_levelNumberFavorite Mode Level
temperature_display_unitNumberTemperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberMotor Speed
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
iic_error_countNumberI2C Error Count
country_codeNumberCountry CodeValue mapping ["17230"="CN","17749"="EU","21843"="US","21591"="TW","19282"="KR","21835"="UK"]

Mijia Smart Air Purifier Elite (xiaomi.airp.meb2) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature/Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
plasmaSwitchPlasma Ionizer
uvSwitchUV Light
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
pm10_densityNumber:DensityPM10 Density
air_qualityNumberAir QualityValue mapping ["0"="Excellent","1"="Good","2"="Moderate","3"="Poor","4"="Heavy Pollution","5"="Hazardous"]
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
favorite_levelNumberFavorite Mode Level
temperature_display_unitNumberTemperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberMotor Speed
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
iic_error_countNumberI2C Error Count
country_codeNumberCountry CodeValue mapping ["17230"="CN","17749"="EU","21843"="US","21591"="TW","19282"="KR","21835"="UK"]

Xiaomi Smart Multifunctional Rice Cooker (xiaomi.cooker.cmk7) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["1"="Idle","2"="Cooking","3"="Scheduled","4"="Keep Warm","5"="Error","6"="Updating","7"="Finished"]
faultNumberFaultValue mapping ["0"="No Faults","9"="Top Sensor Fault","10"="Bottom Sensor Fault","11"="Communication Error"]
cook_modeNumberCook ModeValue mapping ["1"="Fine Cook","2"="Rough Rice","3"="Cook Congee","4"="Soup","5"="Steam Rice","6"="Heat Rice","7"="Keep Warm"]
remaining_timeNumber:TimeRemaining Time
cook_timeNumber:TimeCooking Time
schedule_remaining_timeNumber:TimeSchedule Remaining Time
keep_warm_timeNumber:TimeKeep Warm Time
textureNumberTextureValue mapping ["0"="Soft","1"="Medium","2"="Hard"]
controlStringControlValue mapping ["cancel"="Cancel Cooking"]

Xiaomi Smart Inverter Dehumidifier (xiaomi.derh.30kh) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Water Tank Full or Removed","2"="Temperature/Humidity Sensor Fault","3"="Copper Pipe Sensor Fault","4"="Communication Fault","5"="Clean the Filter","6"="Defrosting","7"="Fan Motor Fault","8"="Overload Protection","9"="Lack of Refrigerant","10"="Overheating"]
modeNumberModeValue mapping ["0"="Smart","1"="Sleep","2"="Clothes Drying","3"="Favourite"]
target_humidityNumber:DimensionlessTarget HumidityNot used in the mode Clothes Drying
fan_levelNumberFan LevelUsed in the mode Favourite; Value mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4","4"="Level 5","5"="Level 6","6"="Level 7"]
dry_after_offSwitchDry & Turn-OffDries the evaporator before the dehumidifier turns off
dry_left_timeNumber:TimeDrying Time Left
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["1"="Dim","2"="Bright"]
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
defrostSwitchDefrosting
plasmaSwitchPlasma
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter"="Reset Filter"]

Xiaomi Smart Inverter Dehumidifier 30L (xiaomi.derh.30l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Water Tank Full or Removed","2"="Temperature/Humidity Sensor Fault","3"="Copper Pipe Sensor Fault","4"="Communication Fault","5"="Clean the Filter","6"="Defrosting","7"="Fan Motor Fault","8"="Overload Protection","9"="Lack of Refrigerant","10"="Overheating"]
modeNumberModeValue mapping ["0"="Smart","1"="Sleep","2"="Clothes Drying","3"="Favourite"]
target_humidityNumber:DimensionlessTarget HumidityNot used in the mode Clothes Drying
fan_levelNumberFan LevelUsed in the mode Favourite; Value mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4","4"="Level 5","5"="Level 6","6"="Level 7"]
dry_after_offSwitchDry & Turn-OffDries the evaporator before the dehumidifier turns off
dry_left_timeNumber:TimeDrying Time Left
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["1"="Dim","2"="Bright"]
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
defrostSwitchDefrosting
plasmaSwitchPlasma
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter"="Reset Filter"]

Mijia Smart Inverter Purifying Dehumidifier Max (xiaomi.derh.60l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Water Tank Full","2"="Temperature/Humidity Sensor Fault","3"="Evaporator Temperature Sensor Fault","4"="Communication Fault","5"="Fan Fault","6"="Lack of Refrigerant","7"="Overheating Protection","8"="Tip-Over Protection","9"="Drive Fault","10"="Exhaust Temperature Sensor Fault","11"="Condenser Temperature Sensor Fault","12"="Back Cover Open","13"="Overload Protection","14"="Exhaust Temperature Too High","15"="Driver Fault","16"="Drainage Fault","17"="Valve Fault","18"="Target Water Level Reached","19"="Water Tank Removed"]
modeNumberModeValue mapping ["0"="Smart","1"="Sleep","2"="Clothes Drying","3"="Favourite","4"="Purify"]
fan_levelNumberFan LevelUsed in the modes Favourite and Purify; Value mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4"]
dry_after_offSwitchDry & Turn-OffDries the evaporator before the dehumidifier turns off
dry_left_timeNumber:TimeDrying Time Left
target_humidityNumber:DimensionlessTarget HumidityNot used in the modes Clothes Drying and Purify
horizontal_swingSwitchOscillation
plasmaSwitchPlasma
uvSwitchUV-C Sterilization
statusNumberStatusValue mapping ["1"="Idle","2"="Defrosting","3"="Clean the Filter","4"="Clean the Pump Pre-Filter","5"="Auxiliary Tank Full"]
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
pm25Number:DensityPM2.5
pm10Number:DensityPM10
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["1"="Dim","2"="Normal"]
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
filter_life_levelNumber:DimensionlessFilter Life
filter_left_timeNumber:TimeFilter Time Left
defrostSwitchDefrosting
drainageNumberContinuous DrainageValue mapping ["0"="Off","1"="Draining"]
water_targetNumber:DimensionlessFull Water LevelDehumidifying stops when this water level is reached; Value mapping ["50"="50%","70"="70%","100"="100%"]
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter"="Reset Filter","reset-pre-filter"="Reset Pre-Filter"]

Mi Smart Standing Fan 2 Lite (xiaomi.fan.2lite) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
fan_levelNumberFan LevelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
modeNumberModeValue mapping ["0"="Standard","1"="Sleep"]
horizontal_swingSwitchOscillation
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults"]

Mijia Smart Standing Fan Pro (xiaomi.fan.p43) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan SpeedUsed in standard mode
fan_levelNumberFan LevelIn natural mode the Mi Home app uses it to select one of the four natural wind presets
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
power_supplyNumberPower SupplyValue mapping ["0"="12 V","1"="9 V, insufficient power","2"="5 V, insufficient power"]

Xiaomi Smart Tower Fan 2 (xiaomi.fan.p45) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan SpeedUsed in standard mode
fan_levelNumberFan LevelIn natural mode the Mi Home app uses it to select one of the four natural wind presets
modeNumberModeValue mapping ["0"="Standard","1"="Natural","2"="Sleep"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults"]

Mijia Smart Desktop Air Circulation Fan (xiaomi.fan.p69) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step
vertical_swingSwitchVertical Oscillation
vertical_angleNumber:AngleVertical Oscillation AngleValue mapping ["30"="30","60"="60","90"="90","100"="100"]
move_verticalStringMove Direction VerticalWrite only. Turns the fan head a step
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Motor Stuck","2"="Insufficient Power"]

Xiaomi Smart Desktop Air Circulation Fan (xiaomi.fan.p70) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step
vertical_swingSwitchVertical Oscillation
vertical_angleNumber:AngleVertical Oscillation AngleValue mapping ["30"="30","60"="60","90"="90","100"="100"]
move_verticalStringMove Direction VerticalWrite only. Turns the fan head a step
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Motor Stuck","2"="Insufficient Power"]

Xiaomi Smart Standing Air Circulation Fan (xiaomi.fan.p76) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4"]
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step
vertical_swingSwitchVertical Oscillation
vertical_angleNumber:AngleVertical Oscillation AngleValue mapping ["30"="30","60"="60","90"="90","100"="100"]
move_verticalStringMove Direction VerticalWrite only. Turns the fan head a step
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Motor Stuck","2"="Insufficient Power"]

Mijia Smart Standing Fan Pro Slim (xiaomi.fan.p85) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan SpeedUsed in standard mode
fan_levelNumberFan LevelIn natural mode the Mi Home app uses it to select one of the four natural wind presets
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90"]
moveStringMove DirectionWrite only. Turns the fan head a step
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchIndicator Light
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Power (9 V)","2"="Insufficient Power (5 V)"]

Mijia Smart Air Circulation Fan Pro (xiaomi.fan.p90) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speed_levelDimmerFan SpeedUsed in standard mode
fan_levelNumberNatural Wind PresetUsed in natural mode
modeNumberModeValue mapping ["0"="Standard","1"="Natural"]
horizontal_swingSwitchOscillation
horizontal_symmetricalSwitchSymmetrical Oscillation
horizontal_left_angleNumber:AngleOscillation Left Angle
horizontal_right_angleNumber:AngleOscillation Right Angle
vertical_swingSwitchVertical Oscillation
vertical_symmetricalSwitchSymmetrical Vertical Oscillation
vertical_up_angleNumber:AngleOscillation Up Angle
vertical_down_angleNumber:AngleOscillation Down Angle
off_to_centerSwitchBack to Center at Power-Off
off_delaySwitchPower-Off Timer Enabled
off_delay_timeNumber:TimePower-Off Timer
off_delay_remainingNumber:TimePower-Off Timer Remaining
buzzerSwitchNotification Sound
ledSwitchScreen
child_lockSwitchChild Lock
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Motor Stuck","2"="Insufficient Power"]

Xiaomi Smart Pet Food Feeder 2 (xiaomi.feeder.iv2001) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults","1"="Fault"]
food_levelNumberFood LevelValue mapping ["0"="Normal","1"="Low"]
dispense_foodNumberDispense FoodDispenses the given number of portions of about 10 g (pi2001 with older firmware: grams)
food_jammedSwitchFood Jammed
bowl_errorSwitchFood Bowl ErrorOn when the food bowl was removed or is not placed correctly
bowl_emptySwitchFood Bowl EmptyRefill reminder: on when the food bowl was empty for the set time
bowl_fullSwitchFood Bowl Full
food_eaten_todayNumberFood Eaten Today
dispensingNumberDispensingValue mapping ["0"="Idle","1"="Busy"]
child_lockSwitchChild LockDisables the dispense buttons of the feeder
auto_screen_offSwitchAuto Screen Off
scheduleStringFeeding ScheduleFormat [A,HHMMPPEE,...]: A 1 when automatic feeding is on, then per meal the time, the portions (two digits) and 01 when enabled or 00 when disabled
schedule_progress_displaySwitchDisplay Schedule ProgressShows the progress of the feeding schedule as a percentage on the feeder
dispensing_correctionSwitchDispensing Error CorrectionDispenses extra food to keep the error within 5 g
spillage_preventionSwitchFood Bowl Spillage PreventionStops automatic dispensing when the food bowl is full
schedule_progressNumber:DimensionlessSchedule Progress
screen_displayNumberScreen DisplayValue mapping ["0"="Food Left (g)","1"="Food Eaten (g)","2"="Percentage"]
desiccant_left_levelNumber:DimensionlessDesiccant Left Level

Mijia Smart Pet Food Feeder 2 (xiaomi.feeder.pi2001) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults","1"="Fault"]
food_levelNumberFood LevelValue mapping ["0"="Normal","1"="Low"]
dispense_foodNumberDispense FoodDispenses the given number of portions of about 10 g (pi2001 with older firmware: grams)
food_jammedSwitchFood Jammed
bowl_errorSwitchFood Bowl ErrorOn when the food bowl was removed or is not placed correctly
bowl_emptySwitchFood Bowl EmptyRefill reminder: on when the food bowl was empty for the set time
bowl_fullSwitchFood Bowl Full
food_eaten_todayNumberFood Eaten Today
dispensingNumberDispensingValue mapping ["0"="Idle","1"="Busy"]
child_lockSwitchChild LockDisables the dispense buttons of the feeder
auto_screen_offSwitchAuto Screen Off
scheduleStringFeeding ScheduleFormat [A,HHMMPPEE,...]: A 1 when automatic feeding is on, then per meal the time, the portions (two digits) and 01 when enabled or 00 when disabled
schedule_progress_displaySwitchDisplay Schedule ProgressShows the progress of the feeding schedule as a percentage on the feeder
dispensing_correctionSwitchDispensing Error CorrectionDispenses extra food to keep the error within 5 g
spillage_preventionSwitchFood Bowl Spillage PreventionStops automatic dispensing when the food bowl is full
schedule_progressNumber:DimensionlessSchedule Progress
screen_displayNumberScreen DisplayValue mapping ["0"="Food Left (g)","1"="Food Eaten (g)","2"="Percentage"]
desiccant_left_levelNumber:DimensionlessDesiccant Left Level

Mijia Smart Dehumidifier 13L (xiaomi.derh.13l) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Water Tank Full or Removed","2"="Temperature/Humidity Sensor Fault","3"="Copper Pipe Sensor Fault","4"="Communication Fault","5"="Clean the Filter","6"="Defrosting","7"="Fan Motor Fault","8"="Overload Protection","9"="Lack of Refrigerant"]
modeNumberModeValue mapping ["0"="Smart","1"="Sleep","2"="Clothes Drying"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["1"="Dim","2"="Bright"]
child_lockSwitchChild Lock
dry_after_offSwitchDry & Turn-OffDries the evaporator before the dehumidifier turns off
dry_left_timeNumber:TimeDrying Time Left
defrostSwitchDefrosting
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter"="Reset Filter"]

Xiaomi Smart Dehumidifier Lite (xiaomi.derh.lite) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Water Tank Full or Removed","2"="Temperature/Humidity Sensor Fault","3"="Copper Pipe Sensor Fault","4"="Communication Fault","5"="Clean the Filter","6"="Defrosting","7"="Fan Motor Fault","8"="Overload Protection","9"="Lack of Refrigerant"]
modeNumberModeValue mapping ["0"="Smart","1"="Sleep","2"="Clothes Drying"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["1"="Dim","2"="Bright"]
child_lockSwitchChild Lock
dry_after_offSwitchDry & Turn-OffDries the evaporator before the dehumidifier turns off
dry_left_timeNumber:TimeDrying Time Left
defrostSwitchDefrosting
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter"="Reset Filter"]

Xiaomi Smart Evaporative Humidifier (xiaomi.humidifier.3lite) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Fan Motor Fault","2"="Clean the Water Level Sensor","3"="Water Pump Fault","4"="Paused","5"="Lack of Water"]
modeNumberModeValue mapping ["0"="Constant Humidity","1"="Sleep","2"="High Power"]
target_humidityNumber:DimensionlessTarget Humidity
drySwitchDry & Turn-OffDries the filter before the humidifier turns off
dry_left_timeNumber:TimeDrying Time Left
overwet_protectionSwitchOver-Humidity ProtectionSwitches to a lower level when the ambient humidity is too high
humidityNumber:DimensionlessHumidity
filter_life_levelNumber:DimensionlessFilter Life
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["0"="Dim","1"="Bright"]
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
cleanSwitchStart CleaningStarts the 30 minute cleaning cycle while the humidifier is off; the cleaning time left shows the progress. Switch the humidifier off to stop
clean_time_leftNumber:TimeCleaning Time Left
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter-life"="Reset Filter Life"]

Mijia Mist-Free Humidifier 3 400mL/h (xiaomi.humidifier.4lite) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Fan Motor Fault","2"="Water Pump Fault","3"="Water Pump Failure","4"="Lack of Water"]
modeNumberModeValue mapping ["0"="Constant Humidity","1"="Sleep","2"="High Power","3"="Air Dry"]
target_humidityNumber:DimensionlessTarget Humidity
dry_left_timeNumber:TimeDrying Time Left
overwet_protectionSwitchOver-Humidity ProtectionSwitches to a lower level when the ambient humidity is too high
humidityNumber:DimensionlessHumidity
filter_life_levelNumber:DimensionlessFilter Life
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["0"="Dim","1"="Bright"]
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
self_cleanNumberSelf-CleaningValue mapping ["1"="Ready","2"="In Progress","3"="Finished"]
clean_time_leftNumber:TimeSelf-Cleaning Time Left
filter_cleanNumberFilter CleaningValue mapping ["0"="Not Needed","1"="Clean the Filter"]
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter-life"="Reset Filter Life","start-self-clean"="Start Self-Cleaning","stop-self-clean"="Stop Self-Cleaning"]

Mijia Smart Evaporative Humidifier Pro (xiaomi.humidifier.600ek) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Fan Motor Fault","2"="Water Pump Fault","3"="Water Pump Failure","4"="Lack of Water"]
modeNumberModeValue mapping ["0"="Constant Humidity","1"="Sleep","2"="High Power","3"="Air Dry"]
target_humidityNumber:DimensionlessTarget Humidity
dry_left_timeNumber:TimeDrying Time Left
overwet_protectionSwitchOver-Humidity ProtectionSwitches to a lower level when the ambient humidity is too high
humidityNumber:DimensionlessHumidity
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["0"="Dim","1"="Bright"]
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
delaySwitchTurn-Off Delay
delay_timeNumber:TimeTurn-Off Delay Time
delay_remain_timeNumber:TimeTurn-Off Delay Remaining
self_cleanNumberSelf-CleaningValue mapping ["1"="Ready","2"="In Progress","3"="Finished"]
clean_time_leftNumber:TimeSelf-Cleaning Time Left
filter_cleanNumberFilter CleaningValue mapping ["0"="Not Needed","1"="Clean the Filter"]
actionsStringActionsValue mapping ["start-self-clean"="Start Self-Cleaning","stop-self-clean"="Stop Self-Cleaning"]

Mijia Smart Anti-bacterial Humidifier 2 (xiaomi.humidifier.jsq2g) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Tank Removed"]
modeNumberModeValue mapping ["0"="Constant Humidity","3"="Level"]
fan_levelNumberFan LevelUsed in the mode Level; Value mapping ["0"="Level 1","1"="Level 2","2"="Level 3"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
ledSwitchIndicator Light
buzzerSwitchNotification Sound
water_tank_removedSwitchWater Tank Removed
water_shortageSwitchInsufficient Water
humidity_sensor_faultSwitchHumidity Sensor Fault
temperature_sensor_faultSwitchTemperature Sensor Fault
overwet_protection_activeSwitchOver-Humidity Protection Active
overwet_protectionSwitchOver-Humidity ProtectionSwitches to level 1 at 85% humidity and turns off after 30 minutes at or above 85%
constant_protection_activeSwitchAuto Turn-Off Active
constant_protectionSwitchAuto Turn-OffTurns off when the target humidity is reached

Xiaomi Smart Humidifier 2 (xiaomi.humidifier.jsq2w) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Tank Removed"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Constant Humidity"]
target_humidityNumber:DimensionlessTarget Humidity
statusNumberStatusValue mapping ["1"="Idle","2"="Busy"]
modeNumberModeValue mapping ["0"="None","1"="Constant Humidity"]
humidityNumber:DimensionlessHumidity
temperatureNumber:TemperatureTemperature
buzzerSwitchNotification Sound
ledSwitchIndicator Light
water_tank_removedSwitchWater Tank Removed
water_shortageSwitchInsufficient Water
humidity_sensor_faultSwitchHumidity Sensor Fault
temperature_sensor_faultSwitchTemperature Sensor Fault
overwet_protection_activeSwitchOver-Humidity Protection Active
overwet_protectionSwitchOver-Humidity Protection
high_humiditySwitchHigh Humidity

Mijia Mist-Free Humidifier 3 (400) (xiaomi.humidifier.p3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice FaultValue mapping ["0"="No Faults","1"="Fan Motor Fault","2"="Clean the Water Level Sensor","3"="Water Pump Fault","4"="Paused","5"="Lack of Water"]
modeNumberModeValue mapping ["0"="Constant Humidity","1"="Sleep","2"="High Power"]
target_humidityNumber:DimensionlessTarget Humidity
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
child_lockSwitchChild Lock
delay_timeNumber:TimeTurn-Off Delay Time0 switches the turn-off delay off
water_statusNumberWaterValue mapping ["0"="Normal","1"="Low Water"]
overwet_protectionSwitchOver-Humidity ProtectionSwitches to a lower level when the ambient humidity is too high
dry_left_timeNumber:TimeDrying Time Left
cleanSwitchStart CleaningStarts the 30 minute cleaning cycle while the humidifier is off; the cleaning time left shows the progress. Switch the humidifier off to stop
clean_time_leftNumber:TimeCleaning Time Left
ledSwitchDisplay
led_brightnessNumberDisplay BrightnessValue mapping ["0"="Dim","1"="Bright"]
filter_life_levelNumber:DimensionlessFilter Life
actionsStringActionsThe filter reset is not yet confirmed on a device; Value mapping ["reset-filter-life"="Reset Filter Life"]

Mijia Smart Quiet Inverter Blender P1 (xiaomi.juicer.dempp1) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="None","1"="Idle","2"="Scheduled","3"="Keep Warm","4"="Cooking","5"="Cleaning","6"="Paused","7"="Disinfecting"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Temperature Control Abnormal","2"="Dry Burning Protection","3"="Jug Lifted","4"="Motor Fault","5"="Lid Off"]
cook_modeNumberCook ModeValue mapping ["1"="Fast Pulp","2"="Soy Milk","3"="Corn Juice","4"="Rice Paste","5"="Congee","6"="Thick Soup","7"="Manual","8"="Juice","9"="Custom","10"="Clean"]
schedule_remaining_timeNumber:TimeSchedule Remaining Time
remaining_timeNumber:TimeRemaining Time
target_temperatureNumber:TemperatureTarget Temperature
pot_lift_memorySwitchResume After Lifting the Jug
alarmSwitchSound
auto_screen_onSwitchScreen Always On
auto_screen_on_timeNumber:TimeScreen On Time
controlStringControlValue mapping ["pause"="Pause","resume"="Resume","cancel"="Cancel"]

Mijia Smart Quiet Inverter Blender P1 (xiaomi.juicer.p1v2) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="None","1"="Idle","2"="Scheduled","3"="Keep Warm","4"="Cooking","5"="Cleaning","6"="Paused","7"="Disinfecting"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Temperature Control Abnormal","2"="Dry Burning Protection","3"="Jug Lifted","4"="Motor Fault","5"="Lid Off"]
cook_modeNumberCook ModeValue mapping ["1"="Fast Pulp","2"="Soy Milk","3"="Corn Juice","4"="Rice Paste","5"="Congee","6"="Thick Soup","7"="Manual","8"="Juice","9"="Custom","10"="Clean"]
schedule_remaining_timeNumber:TimeSchedule Remaining Time
remaining_timeNumber:TimeRemaining Time
target_temperatureNumber:TemperatureTarget Temperature
pot_lift_memorySwitchResume After Lifting the Jug
alarmSwitchSound
auto_screen_onSwitchScreen Always On
auto_screen_on_timeNumber:TimeScreen On Time
controlStringControlValue mapping ["pause"="Pause","resume"="Resume","cancel"="Cancel"]

Xiaomi Smart Electric Hot Water Dispenser 5L (xiaomi.kettle.mek02) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="Power Off","1"="Standby","2"="Heating","3"="Heating Finished","4"="Dechlorination","5"="Keep Warm","6"="Keep Warm Finished","7"="Cooling Down","8"="Delayed Start"]
faultNumberFaultValue mapping ["0"="No Fault","1"="Temperature Sensor Open Circuit","2"="Temperature Sensor Short Circuit","3"="Heating Without Water"]
temperatureNumber:TemperatureWater Temperature
heatingStringHeatingHeat Water heats to the boiling point, Keep Warm to the keep warm temperature, with the settings below; link those channels
target_temperatureNumber:TemperatureTarget Temperature
boiling_pointNumber:TemperatureBoiling Point
auto_keep_warmSwitchKeep Warm After Heating
keep_warm_temperatureNumber:TemperatureKeep Warm Temperature
dechlorinationSwitchDechlorination
pure_water_keep_warmSwitchPure Water Keep Warm
pure_water_keep_warm_temperatureNumber:TemperaturePure Water Keep Warm Temperature
dechlorination_progressNumber:DimensionlessDechlorination Progress
out_water_timeNumberDispense AmountValue mapping ["1"="Capacity 1","2"="Capacity 2","3"="Capacity 3","4"="Unlimited"]
mode_idStringRecipeM0 heat water, M1 keep warm, A<n> / C<n> custom recipes
reservation_left_timeNumber:TimeDelayed Start Time Left
child_lockSwitchChild Lock
current_physical_control_lockSwitchChild Lock Active
alarmSwitchSound
auto_screen_offNumberScreen Off AfterValue mapping ["0"="1 Minute","1"="3 Minutes","2"="5 Minutes"]

Xiaomi Smart Kettle 2 Pro (xiaomi.kettle.v20) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="Standby","1"="Heating","2"="Boiling","3"="Cooling","4"="Keep Warm"]
faultNumberFault
temperatureNumber:TemperatureWater Temperature
heatingStringHeatingStart sends the target temperature, mode and keep warm settings together, as the app does; link those channels
target_temperatureNumber:TemperatureTarget Temperature
target_modeNumberModeValue mapping ["0"="Heat","1"="Boil"]
auto_keep_warmSwitchKeep Warm
keep_warm_temperatureNumber:TemperatureKeep Warm Temperature
keep_warm_timeNumber:TimeKeep Warm Time
warming_timeNumber:TimeKeep Warm Elapsed Time
kettle_liftingSwitchKettle Lifted
no_disturbSwitchDo Not Disturb
custom_knob_tempSwitchCustom Knob Temperature
lift_remember_tempSwitchRemember Temperature After Lifting
boiling_reminderSwitchBoiling Reminder
keep_warm_reminderSwitchKeep Warm Reminder

Xiaomi Smart Kettle 2 Pro (xiaomi.kettle.v21) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="Standby","1"="Heating","2"="Boiling","3"="Cooling","4"="Keep Warm"]
faultNumberFault
temperatureNumber:TemperatureWater Temperature
heatingStringHeatingStart sends the target temperature, mode and keep warm settings together, as the app does; link those channels
target_temperatureNumber:TemperatureTarget Temperature
target_modeNumberModeValue mapping ["0"="Heat","1"="Boil"]
auto_keep_warmSwitchKeep Warm
keep_warm_temperatureNumber:TemperatureKeep Warm Temperature
keep_warm_timeNumber:TimeKeep Warm Time
warming_timeNumber:TimeKeep Warm Elapsed Time
kettle_liftingSwitchKettle Lifted
no_disturbSwitchDo Not Disturb
custom_knob_tempSwitchCustom Knob Temperature
lift_remember_tempSwitchRemember Temperature After Lifting
boiling_reminderSwitchBoiling Reminder
keep_warm_reminderSwitchKeep Warm Reminder

Mijia Smart Pet Fountain 2 (xiaomi.pet_waterer.70m2) Channels ​

ChannelTypeDescriptionComment
faultNumberFaultValue mapping ["0"="No Faults"]
statusNumberStatusValue mapping ["1"="On Standby","2"="Water Dispensing"]
modeNumberModeContinuous mode is only available while charging. Value mapping ["0"="Sensing","1"="Intermittent","2"="Continuous"]
water_intervalNumber:TimeDispense IntervalInterval of the intermittent mode
water_shortageSwitchWater Shortage
filter_life_levelNumber:DimensionlessFilter Life Level
filter_left_timeNumber:TimeFilter Left Time
child_lockSwitchChild LockAll buttons except the power button are disabled
battery_levelNumber:DimensionlessBattery Level
charging_stateNumberCharging StateValue mapping ["0"="Not Charging","1"="Charging","2"="Fully Charged"]
dndSwitchDo Not DisturbThe indicators are off during the DND period
low_batterySwitchLow Battery
charger_connectedSwitchCharger Connected
dnd_startNumber:TimeDo Not Disturb StartSeconds after midnight
dnd_endNumber:TimeDo Not Disturb EndSeconds after midnight
pump_block_flagSwitchPump Blocked

Xiaomi Smart Pet Fountain 2 (xiaomi.pet_waterer.iv02) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
statusNumberStatusValue mapping ["1"="On Standby","2"="Water Dispensing"]
modeNumberModeContinuous mode is only available while charging. Value mapping ["0"="Sensing","1"="Intermittent","2"="Continuous"]
water_intervalNumber:TimeDispense IntervalInterval of the intermittent mode (older firmware)
water_interval_newNumber:TimeDispense Interval (New Firmware)Interval of the intermittent mode, used by newer firmware
water_shortageSwitchWater Shortage
filter_life_levelNumber:DimensionlessFilter Life Level
filter_left_timeNumber:TimeFilter Left Time
child_lockSwitchChild LockAll buttons except the power button are disabled
battery_levelNumber:DimensionlessBattery Level
charging_stateNumberCharging StateValue mapping ["0"="Not Charging","1"="Charging","2"="Fully Charged"]
dndSwitchDo Not DisturbThe indicators are off during the DND period
low_batterySwitchLow Battery
charger_connectedSwitchCharger Connected
dnd_startNumber:TimeDo Not Disturb StartSeconds after midnight
dnd_endNumber:TimeDo Not Disturb EndSeconds after midnight
pump_block_flagSwitchPump Blocked

Xiaomi Robot Vacuum T12 (xiaomi.vacuum.b106bk) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-start-mop"="Start Mopping Only","battery-start-charge"="Go Charging"]
statusNumberRobot Cleaner - StatusThe MIoT specification lists 6 as Mopping and 7 as Sweeping and Mopping; the Mi Home app uses 6 for sweeping and mopping and 7 for mopping. Value mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Go Charging","4"="Charging","5"="Sweeping","6"="Sweeping and Mopping","7"="Mopping","8"="Upgrade"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - ModeValue mapping ["0"="Sweep","1"="Sweep And Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="Global","1"="Mop","2"="Edge","3"="Area","4"="Point","5"="Remote Control","6"="Explore","7"="Room","8"="Floor Type"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Find Robot
volumeNumberAlarm - VolumeVolume level 0-10; the Mi Home app shows it as 0-100%
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Dirt Detection
pet_recognizeSwitchSweep - Pet Mode
ai_recognizeSwitchSweep - AI Obstacle Recognition
carpet_boosterSwitchSweep - Carpet Boost
carpet_avoidSwitchSweep - Carpet Avoidance
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute

Xiaomi Robot Vacuum S12 (xiaomi.vacuum.b106eu) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-start-mop"="Start Mopping Only","battery-start-charge"="Go Charging"]
statusNumberRobot Cleaner - StatusThe MIoT specification lists 6 as Mopping and 7 as Sweeping and Mopping; the Mi Home app uses 6 for sweeping and mopping and 7 for mopping. Value mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Go Charging","4"="Charging","5"="Sweeping","6"="Sweeping and Mopping","7"="Mopping","8"="Upgrade"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - ModeValue mapping ["0"="Sweep","1"="Sweep And Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="Global","1"="Mop","2"="Edge","3"="Area","4"="Point","5"="Remote Control","6"="Explore","7"="Room","8"="Floor Type"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Find Robot
volumeNumberAlarm - VolumeVolume level 0-10; the Mi Home app shows it as 0-100%
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
dirt_recognizeSwitchSweep - Dirt Detection
pet_recognizeSwitchSweep - Pet Mode
ai_recognizeSwitchSweep - AI Obstacle Recognition
carpet_boosterSwitchSweep - Carpet Boost
carpet_avoidSwitchSweep - Carpet Avoidance
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute

Xiaomi Robot Vacuum S20+ (xiaomi.vacuum.b108gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-mop"="Start Mopping Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-pause-sweeping"="Pause","vacuum-start-build-map"="Start Mapping","battery-start-charge"="Go Charging","main-brush-reset-brush-life"="Reset Main Brush Life","side-brush-reset-brush-life"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Life","vacuum-extend-continue-sweep"="Resume Cleaning","vacuum-extend-remote-control"="Start Remote Control","vacuum-extend-find-vacuum"="Find Robot","vacuum-extend-start-custom-sweep"="Start Custom Cleaning","vacuum-extend-try-listen"="Test Voice","vacuum-extend-start-remote-up"="Remote Control Forward","vacuum-extend-start-remote-left"="Remote Control Left","vacuum-extend-start-remote-right"="Remote Control Right","vacuum-extend-start-remote-down"="Remote Control Backward","vacuum-extend-stop-remote"="Remote Control Stop","vacuum-extend-exit-remote"="Exit Remote Control","vacuum-extend-stop-and-gocharge"="Stop And Go Charging","vacuum-map-save-permanent-map"="Save Map","vacuum-map-auto-room-partition"="Auto Room Partition"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging (Cleaning Paused)","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Remote","8"="Charged","9"="Mapping","10"="Updating"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Sweep Mop TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["1"="Global","5"="Mapping","6"="Go Charging","7"="Remote Control","8"="Room Cleaning","9"="Custom Cleaning","4"="Zone Cleaning"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Clean TimesValue mapping ["1"="Once","2"="Twice"]
suction_levelNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water Output LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
zone_idsStringRobot Cleaner - Zone IDs
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with suction_level. Value mapping ["1"="Silent","2"="Basic","3"="Strong"]
edge_swing_tail_sweepSwitchRobot Cleaner - Edge Swing Tail Sweep
edge_sweep_frequencyNumberRobot Cleaner - Edge Sweep FrequencyValue mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
noticeStringRobot Cleaner - Notice
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore"]
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
alarmSwitchAlarm - Enabled
volumeNumber:DimensionlessAlarm - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
brush_left_timeNumber:TimeMain Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Brush - Brush Life Level
brush_left_time1Number:TimeSide Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Brush - Brush Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_statusSwitchVacuum Extend - Mop Attached
firmware_versionStringVacuum Extend - Firmware Version
dnd_switchSwitchVacuum Extend - Do Not Disturb
carpet_boostSwitchVacuum Extend - Carpet Boost
carpet_avoidanceSwitchVacuum Extend - Carpet Avoidance
carpet_displaySwitchVacuum Extend - Carpet Display
status_extendNumberVacuum Extend - Status ExtendValue mapping ["0"="None","1"="Sleep","2"="Relocation"]
room_infoStringVacuum Extend - Room Info
sweep_break_switchSwitchVacuum Extend - Resume After Charging
vacuum_positionStringVacuum Map - Vacuum Position
permanent_map_idNumberVacuum Map - Permanent Map Id
map_control_switchSwitchVacuum Map - Map Control Switch

Xiaomi Robot Vacuum E10 (xiaomi.vacuum.b112) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-start-mop"="Start Mopping Only","battery-start-charge"="Go Charging","battery-stop-charge"="Stop Going To Charge","sweep-reset-main-brush"="Reset Main Brush Life","sweep-reset-side-brush"="Reset Side Brush Life","sweep-reset-filter"="Reset Filter Life","sweep-reset-mop"="Reset Mop Life"]
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Returning To Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming And Mopping","7"="Mopping","8"="Upgrade"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - ModeValue mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","2"="Edge","4"="Spot","5"="Remote Control"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeThe volume is set in steps of 10%, 0 mutes the voice prompts.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Off","1"="Silent","2"="Standard","3"="Medium","4"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Off","1"="Low","2"="Medium","3"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="S-Shape","1"="Y-Shape"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
map_privacyNumberMap - Map PrivacyValue mapping ["0"="Map Enabled","1"="Map Disabled"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute

Xiaomi Robot Vacuum E10C (xiaomi.vacuum.b112bk) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-start-mop"="Start Mopping Only","battery-start-charge"="Go Charging","battery-stop-charge"="Stop Going To Charge","sweep-reset-main-brush"="Reset Main Brush Life","sweep-reset-side-brush"="Reset Side Brush Life","sweep-reset-filter"="Reset Filter Life","sweep-reset-mop"="Reset Mop Life"]
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Returning To Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming And Mopping","7"="Mopping","8"="Upgrade"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - ModeValue mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","2"="Edge","4"="Spot","5"="Remote Control"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeThe volume is set in steps of 10%, 0 mutes the voice prompts.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Off","1"="Silent","2"="Standard","3"="Medium","4"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Off","1"="Low","2"="Medium","3"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="S-Shape","1"="Y-Shape"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
map_privacyNumberMap - Map PrivacyValue mapping ["0"="Map Enabled","1"="Map Disabled"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute

Xiaomi Robot Vacuum E12 (xiaomi.vacuum.b112gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-start-mop"="Start Mopping Only","battery-start-charge"="Go Charging","battery-stop-charge"="Stop Going To Charge","sweep-reset-main-brush"="Reset Main Brush Life","sweep-reset-side-brush"="Reset Side Brush Life","sweep-reset-filter"="Reset Filter Life","sweep-reset-mop"="Reset Mop Life"]
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Returning To Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming And Mopping","7"="Mopping","8"="Upgrade"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - ModeValue mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","2"="Edge","4"="Spot","5"="Remote Control"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmNumberAlarm - LocateValue mapping ["1"="Play"]
volumeNumberAlarm - VolumeThe volume is set in steps of 10%, 0 mutes the voice prompts.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Off","1"="Silent","2"="Standard","3"="Medium","4"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Off","1"="Low","2"="Medium","3"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="S-Shape","1"="Y-Shape"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning"]
map_privacyNumberMap - Map PrivacyValue mapping ["0"="Map Enabled","1"="Map Disabled"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute

Xiaomi Robot Vacuum X20+ (xiaomi.vacuum.c102gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","battery-start-charge"="Return To Dock","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Life","vacuum-extend-start-fast-mapping"="Start Fast Mapping (Replaces Map)","vacuum-extend-stop-clean"="Stop Cleaning (Extended)","audio-position"="Find Robot","audio-play-sound"="Play Test Sound"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading","15"="Summoned Mop Cleaning","16"="Station Reset","17"="Go Install Mop","18"="Go Remove Mop","19"="Water Inspecting","20"="Washing Mop And Refilling Water","21"="Washing Mop Paused","22"="Dust Collecting","23"="Remote Control Cleaning","24"="Smart Charging","25"="Second Mop Cleaning","26"="Following Human","30"="Station Self Cleaning"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels Suspended (Drop)","2"="Robot Suspended","3"="Bumper Stuck (Collision)","4"="Robot Tilted","5"="Bumper Stuck (Repeated Collision)","6"="Wheels Suspended (Repeated Drop)","7"="Internal Sensor Error (Code 7)","8"="Dust Box Not Installed","12"="Main Brush Entangled","13"="Side Brush Entangled","15"="Stuck Or Wheels Blocked (Left Wheel Motor)","16"="Stuck Or Wheels Blocked (Right Wheel Motor)","17"="Blocked Or Stuck (Turning)","18"="Blocked Or Stuck (Forward)","20"="Low Battery","21"="Charging Error","23"="Internal Sensor Error (Code 23)","25"="Internal Sensor Error (Code 25)","30"="Internal Sensor Error (Code 30)","31"="Stuck Or Wheels Blocked (Left Wheel Speed)","32"="Stuck Or Wheels Blocked (Right Wheel Speed)","33"="Internal Sensor Error (Code 33)","34"="Internal Sensor Error (Code 34)","35"="Internal Sensor Error (Code 35)","36"="Internal Sensor Error (Code 36)","37"="Internal Sensor Error (Code 37)","38"="Internal Sensor Error (Code 38)","39"="Internal Sensor Error (Code 39)","40"="Internal Sensor Error (Code 40)","48"="Laser Sensor Bumper Error","49"="Laser Sensor Bumper Stuck","51"="Filter Wet Or Blocked","54"="Edge Sensor Error","58"="Ultrasonic Sensor Error","61"="Unable To Reach Area (Obstacle)","62"="Unable To Reach Area (Virtual Wall)","63"="Cleaning Path Blocked (Door Closed)","64"="Cleaning Path Blocked (Out Of Range)","65"="In Restricted Area","69"="Mop Tray Removed (Mop Check)","70"="Mop Tray Removed (Mop Check Fast Mapping)","71"="Mop Tray Stuck (Mop Motor)","72"="Mop Tray Stuck (Mop Motor Current)","101"="Dust Bag Full Or Vent Blocked (Full)","102"="Dust Bag Not Installed","103"="Dust Collector Lid Open","104"="Dust Bag Full Or Vent Blocked (Blocked)","105"="Clean Water Tank Empty (Not Installed)","106"="Dirty Water Tank Error (Not Installed)","107"="Clean Water Tank Empty (No Water)","108"="Dirty Water Tank Error (Full)","111"="Cleaning Tray Not Installed","112"="Cleaning Tray Water Level High (Code 112)","116"="Clean Water Tank Empty (Code 116)","118"="Dirty Water Tank Error (Code 118)","119"="Cleaning Tray Water Level High (Code 119)"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode. Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level in clean_setting. Value mapping ["1"="Low","2"="Medium","3"="High"]
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused","27"="Station Self Cleaning","28"="Station Self Cleaning Waiting To Return","29"="Station Self Cleaning Going To Charge","31"="Auto Clean Wash Paused","32"="Room Clean Wash Paused","33"="Zone Clean Wash Paused"]
break_point_restartSwitchVacuum Extend - Resume After Charging
carpet_pressSwitchVacuum Extend - Carpet Boost
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot used by the Mi Home app, which only resets it to 0
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - Faults
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming, 3 vacuuming before mopping), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, otherwise a multiple of 5) and the mop water level (1 to 3, mop_mode) from bit 16. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_recognitionNumberVacuum Extend - Carpet RecognitionValues 2, 4, 5 and 6 are reported while the ultrasonic sensor has an error; the Mi Home app then refuses to switch it on. Value mapping ["0"="Off","1"="On"]
smart_wash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pads during a cleaning task
carpet_escapeNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_recognition is on. Value mapping ["1"="Avoid Carpets","2"="Vacuum Only On Carpets"]
drying_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeThe Mi Home app of this model only offers Daily and Deep. Value mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_change_stateStringAudio - Voice Change State
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

Mijia Robot Vacuum M30 Pro (xiaomi.vacuum.c107) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-cut-hair"="Start Cutting Tangled Hair","vacuum-stop-cut-hair"="Stop Cutting Tangled Hair","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-start-water-self-check"="Start Water Self Check","vacuum-cancel-water-self-check"="Cancel Water Self Check","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","210001"="Robot Stuck (Move To New Location)","210002"="Wheels Suspended","210003"="Slope Detected","210004"="Robot Stuck (Clear Surroundings)","210005"="Target Location Unreachable","210007"="Positioning Failed","210008"="In Restricted Area","210009"="Return To Station Failed","210013"="Dust Box Not Installed","210014"="Mop Tray Fell Off","210024"="Robot Water Tank Empty","210025"="Mop Pad May Be Dirty","210026"="Mop Tray Missing","210030"="Clean Water Tank Low","210040"="Cleaning Tray Not Installed","210050"="Clean Water Tank Not Installed","210060"="Dirty Water Tank Full","210070"="Dirty Water Tank Not Installed","210080"="Dust Bag Not Installed","320001"="Battery Temperature Error","320002"="Main Brush Error","320003"="Side Brush Error","320004"="Right Drive Wheel Error","320006"="Cliff Sensor Error","320007"="Fan Error","320008"="Bumper Error","320009"="Charging Error","320010"="Laser Sensor Error","320011"="Edge Sensor Error","320012"="Line Laser Sensor Error","320013"="Mop Pad Holder Stuck","320016"="Laser Sensor Protective Cap Error","320017"="Cannot Start On Carpet","320020"="Cleaning Tray Water Level Too High","320030"="Tangled Hair Cutting Error","320031"="Residue Box Not Cleaned","320032"="Station Pairing Error","320040"="Water Inlet System Error","320050"="Water Outlet System Error"]
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
hot_water_mop_washSwitchRobot Cleaner - Hot Water Mop Washing
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing FrequencyValue mapping ["0"="Every 5 Square Meters","1"="Every 10 Square Meters","2"="Every 8 Square Meters"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
cut_hair_configSwitchRobot Cleaner - Auto Cutting Tangled Hair
frequency_cut_hair_configNumberRobot Cleaner - Tangled Hair Cutting FrequencyValue mapping ["1"="Every Cleaning","2"="Every 2 Cleanings","3"="Every 3 Cleanings","4"="During And After Cleaning"]
use_detergentSwitchRobot Cleaner - Use Detergent
detergent_depletion_reminderSwitchRobot Cleaner - Detergent Depletion Reminder
detergent_left_levelNumber:DimensionlessDetergent - Detergent Level
detergent_left_timeNumber:TimeDetergent - Detergent Left Time
auto_water_change_installedSwitchRobot Cleaner - Auto Water Refill And Drain Installed
water_check_statusNumberRobot Cleaner - Water Self Check StatusValue mapping ["0"="Not Checked","1"="Checking","2"="Check Successful","3"="Check Failed"]
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
edge_swing_tail_sweepSwitchRobot Cleaner - Corners And Edges Focus
edge_sweep_frequencyNumberRobot Cleaner - Corners And Edges Focus FrequencyValue mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
sweep_ai_detectionSwitchRobot Cleaner - AI Recognition
ai_cleaningSwitchRobot Cleaner - AI Obstacle Avoidance
solid_dirt_detectionSwitchRobot Cleaner - Solid Dirt Recognition
dirt_detectionSwitchRobot Cleaner - Key Stain Recognition
object_detectionSwitchRobot Cleaner - Obstacle Recognition
room_detectionSwitchRobot Cleaner - Room Recognition
floor_material_detectionSwitchRobot Cleaner - Floor Material Recognition
ai_managed_cleaningSwitchRobot Cleaner - AI Hosted Cleanup
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum E5 (xiaomi.vacuum.c108) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","go-charging-start-charging"="Go Charging","go-charging-stop-charging"="Stop Going To Charge","identify-identify"="Find Robot"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Standby","2"="Cleaning","3"="Paused","4"="Error","5"="Charging","6"="Returning To Dock","7"="Fully Charged"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Faults","1"="Left Wheel Stuck","2"="Right Wheel Stuck","3"="Bumper Stuck","4"="Side Brush Stuck","5"="Cliff Sensor Error","6"="Wheels Suspended","7"="Fan Error","8"="Low Battery","9"="Return To Dock Failed","10"="Robot Trapped","11"="Left Wheel Error","12"="Right Wheel Error","13"="Side Brush Error","14"="Battery Temperature Error","15"="Slope Detected"]
sweep_typeNumberRobot Cleaner - Cleanup RangeValue mapping ["1"="Whole House","2"="Spot","3"="Edge"]
suction_levelNumberRobot Cleaner - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning AreaThe MIoT spec describes this value in units of 0.01 m², but the Mi Home app shows it unscaled as m². This channel follows the app.
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
last_clean_timeStringRobot Cleaner - Last Clean TimeDay, month, hour and minute of the last cleaning as ddMMHHmm, a day below 10 is reported without leading zero. The year is not reported.
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Not Charging","2"="Charging","3"="Fully Charged"]
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
brush_life_levelNumber:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeSide Cleaning Brush - Brush Left Time
no_disturbSwitchDo Not Disturb - Enabled
enable_time_periodStringDo Not Disturb - Time PeriodStart and end of the do not disturb period as HHMMHHMM, for example 22000700 for 22:00 to 07:00. A start hour below 10 can be reported without leading zero.
total_clean_areaNumber:AreaClean Record - Total Clean Area
total_clean_timeNumber:TimeClean Record - Total Clean Time
total_clean_countNumberClean Record - Total Clean Count
direction_keyNumberRemote Control - DirectionValue mapping ["0"="Left","1"="Right","2"="Forward","3"="Backward","4"="Stop"]
lightingSwitchLighting - Light

Xiaomi Robot Vacuum X20 Pro (xiaomi.vacuum.d102gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the X20 Max (xiaomi.vacuum.d109gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the X20 Max (xiaomi.vacuum.d109gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the X20 Max (xiaomi.vacuum.d109gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionOnly available on the X20 Max (xiaomi.vacuum.d109gl)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyOnly available on the X20 Max (xiaomi.vacuum.d109gl). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodThe spec also lists Ignore (2) and Cross (3), the app does not offer them on these models. Value mapping ["0"="Adaptive","1"="Avoid"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
sewage_self_cleaningSwitchRobot Cleaner - Dirty Water Pipeline Self-CleaningOnly available on the X20 Max (xiaomi.vacuum.d109gl). Cleans the dirty water pipeline of the station after mop washing

Xiaomi Robot Vacuum S20 (xiaomi.vacuum.d106gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-start-only-sweep"="Start Vacuuming Only","vacuum-start-sweep-mop"="Start Vacuuming And Mopping","vacuum-start-mop"="Start Mopping Only","battery-start-charge"="Go Charging","battery-stop-charge"="Stop Going To Charge","sweep-reset-main-brush"="Reset Main Brush Life","sweep-reset-side-brush"="Reset Side Brush Life","sweep-reset-filter"="Reset Filter Life","sweep-reset-mop"="Reset Mop Life"]
statusNumberRobot Cleaner - StatusValue mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Returning To Dock","4"="Charging","5"="Vacuuming","6"="Vacuuming And Mopping","7"="Mopping","8"="Upgrade","9"="Building Map","10"="Fully Charged"]
faultNumberRobot Cleaner - Device Fault
modeNumberRobot Cleaner - ModeValue mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="Vacuum Then Mop"]
sweep_typeNumberRobot Cleaner - Sweep TypeValue mapping ["0"="All Areas","1"="Mop","2"="Edge","3"="Area","4"="Spot","5"="Remote Control","6"="Mapping","7"="Room","8"="Floor Type"]
battery_levelNumber:DimensionlessBattery - Battery Level
alarmSwitchAlarm - Locate
volumeNumberAlarm - VolumeThe volume is set in steps of 10%, 0 mutes the voice prompts.
repeat_stateSwitchSweep - Clean Twice
door_stateNumberSweep - Installed BoxValue mapping ["0"="None","1"="Dust Box","2"="Water Box","3"="2-in-1 Box"]
cloth_stateSwitchSweep - Mop Attached
suction_stateNumberSweep - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
water_stateNumberSweep - Water LevelValue mapping ["0"="Low","1"="Medium","2"="High"]
mop_routeNumberSweep - Mop RouteValue mapping ["0"="Standard (S-Shape)","1"="Professional (Y-Shape)"]
side_brush_lifeNumber:DimensionlessSweep - Side Brush Life
side_brush_hoursNumber:TimeSweep - Side Brush Time Left
main_brush_lifeNumber:DimensionlessSweep - Main Brush Life
main_brush_hoursNumber:TimeSweep - Main Brush Time Left
hypa_lifeNumber:DimensionlessSweep - Filter Life
hypa_hoursNumber:TimeSweep - Filter Time Left
mop_lifeNumber:DimensionlessSweep - Mop Life
mop_hoursNumber:TimeSweep - Mop Time Left
directionNumberSweep - Remote Control DirectionValue mapping ["1"="Forward","2"="Left","3"="Right","4"="Back","5"="Stop","10"="Exit"]
cleaning_timeNumber:TimeSweep - Cleaning Time
cleaning_areaNumber:AreaSweep - Cleaning Area
carpet_boosterSwitchSweep - Carpet Boost
carpet_avoidSwitchSweep - Carpet Avoidance
tank_shakeSwitchSweep - Mop Vibration
shake_shiftNumberSweep - Mop Vibration LevelValue mapping ["1"="Low","2"="Medium","3"="High"]
carpet_showSwitchSweep - Carpet Display
build_mapNumberMap - Mapping StatusValue mapping ["0"="None","1"="Mapping","2"="Mapping While Cleaning","3"="Cleaning With Map"]
map_uploadsNumberMap - Map UploadValue mapping ["0"="Upload","1"="Do Not Upload"]
dnd_enableSwitchDo Not Disturb - Enabled
dnd_start_hourNumberDo Not Disturb - Start Hour
dnd_start_minuteNumberDo Not Disturb - Start Minute
dnd_end_hourNumberDo Not Disturb - End Hour
dnd_end_minuteNumberDo Not Disturb - End Minute

Xiaomi Robot Vacuum X20 Max (xiaomi.vacuum.d109gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the X20 Max (xiaomi.vacuum.d109gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the X20 Max (xiaomi.vacuum.d109gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the X20 Max (xiaomi.vacuum.d109gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionOnly available on the X20 Max (xiaomi.vacuum.d109gl)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyOnly available on the X20 Max (xiaomi.vacuum.d109gl). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodThe spec also lists Ignore (2) and Cross (3), the app does not offer them on these models. Value mapping ["0"="Adaptive","1"="Avoid"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
sewage_self_cleaningSwitchRobot Cleaner - Dirty Water Pipeline Self-CleaningOnly available on the X20 Max (xiaomi.vacuum.d109gl). Cleans the dirty water pipeline of the station after mop washing

Mijia Robot Vacuum M40 (xiaomi.vacuum.d110ch) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","battery-start-charge"="Return To Dock","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","mop-reset-mop-life"="Reset Mop Life","detergent-reset-detergent-life"="Reset Detergent Life","vacuum-extend-start-fast-mapping"="Start Fast Mapping (Replaces Map)","vacuum-extend-stop-clean"="Stop Cleaning (Extended)","audio-position"="Find Robot","audio-play-sound"="Play Test Sound"]
statusNumberRobot Cleaner - StatusValue mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying Mop","9"="Washing Mop","10"="Go Washing Mop","11"="Building Map","12"="Sweeping And Mopping","13"="Charging Completed","14"="Upgrading","15"="Summoned Mop Cleaning","16"="Station Reset","17"="Go Install Mop","18"="Go Remove Mop","19"="Water Inspecting","20"="Washing Mop And Refilling Water","21"="Washing Mop Paused","22"="Dust Collecting","23"="Remote Control Cleaning","24"="Smart Charging","25"="Second Mop Cleaning","26"="Following Human","30"="Station Self Cleaning"]
faultNumberRobot Cleaner - Device FaultValue mapping ["0"="No Fault","1"="Wheels Suspended (Drop)","2"="Robot Suspended","3"="Bumper Stuck (Collision)","4"="Robot Tilted","5"="Bumper Stuck (Repeated Collision)","6"="Wheels Suspended (Repeated Drop)","7"="Internal Sensor Error (Code 7)","8"="Dust Box Not Installed","12"="Main Brush Entangled","13"="Side Brush Entangled","15"="Stuck Or Wheels Blocked (Left Wheel Motor)","16"="Stuck Or Wheels Blocked (Right Wheel Motor)","17"="Blocked Or Stuck (Turning)","18"="Blocked Or Stuck (Forward)","20"="Low Battery","21"="Charging Error","23"="Internal Sensor Error (Code 23)","25"="Internal Sensor Error (Code 25)","30"="Internal Sensor Error (Code 30)","31"="Stuck Or Wheels Blocked (Left Wheel Speed)","32"="Stuck Or Wheels Blocked (Right Wheel Speed)","33"="Internal Sensor Error (Code 33)","34"="Internal Sensor Error (Code 34)","35"="Internal Sensor Error (Code 35)","36"="Internal Sensor Error (Code 36)","37"="Internal Sensor Error (Code 37)","38"="Internal Sensor Error (Code 38)","39"="Internal Sensor Error (Code 39)","40"="Internal Sensor Error (Code 40)","48"="Laser Sensor Bumper Error","49"="Laser Sensor Bumper Stuck","51"="Filter Wet Or Blocked","54"="Edge Sensor Error","58"="Ultrasonic Sensor Error","61"="Unable To Reach Area (Obstacle)","62"="Unable To Reach Area (Virtual Wall)","63"="Cleaning Path Blocked (Door Closed)","64"="Cleaning Path Blocked (Out Of Range)","65"="In Restricted Area","69"="Mop Tray Removed (Mop Check)","70"="Mop Tray Removed (Mop Check Fast Mapping)","71"="Mop Tray Stuck (Mop Motor)","72"="Mop Tray Stuck (Mop Motor Current)","101"="Dust Bag Full Or Vent Blocked (Full)","102"="Dust Bag Not Installed","103"="Dust Collector Lid Open","104"="Dust Bag Full Or Vent Blocked (Blocked)","105"="Clean Water Tank Not Installed","106"="Dirty Water Tank Error (Not Installed)","107"="Clean Water Tank Empty (No Water)","108"="Dirty Water Tank Error (Full)","111"="Cleaning Tray Not Installed","112"="Cleaning Tray Water Level High (Code 112)","116"="Clean Water Tank Empty (Code 116)","118"="Dirty Water Tank Error (Code 118)","119"="Cleaning Tray Water Level High (Code 119)"]
modeNumberRobot Cleaner - ModeNot used by the Mi Home app, which sets the suction level with cleaning_mode. Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
detergent_life_levelNumber:DimensionlessDetergent - Detergent Life LevelThe Mi Home app only shows the detergent consumable when the auto water refilling and drainage device with detergent is installed
detergent_left_timeNumber:TimeDetergent - Detergent Left TimeThe Mi Home app only shows the detergent consumable when the auto water refilling and drainage device with detergent is installed
work_modeNumberVacuum Extend - Work ModeValue mapping ["0"="Idle","1"="Paused","2"="Auto Clean","3"="Back Home","4"="Partial Clean","5"="Follow Wall","6"="Charging","7"="Firmware Update","8"="Factory Test","9"="WiFi Setup","10"="Power Off","11"="Factory","12"="Error Report","13"="Remote Control","14"="Sleep","15"="Self Test","16"="Factory Function Test","17"="Standby","18"="Room Clean","19"="Zone Clean","20"="Spot Clean","21"="Fast Mapping","24"="Summoned Clean","1501"="Water Self Check"]
cleaning_timeNumber:TimeVacuum Extend - Cleaning Time
cleaning_areaNumber:AreaVacuum Extend - Cleaning Area
cleaning_modeNumberVacuum Extend - Suction LevelValue mapping ["0"="Silent","1"="Standard","2"="Strong","3"="Turbo"]
mop_modeNumberVacuum Extend - Mop Water LevelNot written by the Mi Home app of this model, which sets the mop water level with water_level. Value mapping ["1"="Low","2"="Medium","3"="High"]
water_levelNumberGeneral Protocol - Mop Water OutputNegative values are the presets of the Mi Home app (-5 small, -10 standard, -15 large), 1 to 15 is a manual water level (1 is extra small). The app does not change it while the robot only vacuums
waterbox_statusSwitchVacuum Extend - Mop Installed
task_statusNumberVacuum Extend - Task StatusValue mapping ["0"="Completed","1"="Auto Cleaning","2"="Zone Cleaning","3"="Room Cleaning","4"="Spot Cleaning","5"="Fast Mapping","6"="Auto Cleaning Paused","7"="Zone Cleaning Paused","8"="Room Cleaning Paused","9"="Spot Cleaning Paused","10"="Map Cleaning Paused","11"="Charging Paused","12"="Back Washing Paused","13"="Room Back Washing Paused","14"="Zone Back Washing Paused","15"="Auto Back Washing Paused","16"="Auto Charging Paused","17"="Selected Charging Paused","18"="Zone Charging Paused","19"="Spot Charging Paused","27"="Station Self Cleaning","28"="Station Self Cleaning Waiting To Return","29"="Station Self Cleaning Going To Charge","31"="Auto Clean Wash Paused","32"="Room Clean Wash Paused","33"="Zone Clean Wash Paused"]
break_point_restartSwitchVacuum Extend - Resume After Charging
carpet_pressSwitchVacuum Extend - Carpet Boost
carpet_firstSwitchGeneral Protocol - Vacuum Carpets First
serial_numberStringVacuum Extend - Serial Number
clean_rags_tipNumber:TimeVacuum Extend - Clean Rags TipNot used by the Mi Home app, which only resets it to 0
keep_sweeper_timeNumber:TimeVacuum Extend - Keep Sweeper Time
faultsStringVacuum Extend - Faults
nation_matchedStringVacuum Extend - Nation Matched
relocation_statusNumberVacuum Extend - Relocation Status
clean_settingNumberVacuum Extend - Clean SettingPacked setting that the Mi Home app writes for the cleaning type, the mop pad washing frequency and the mop water level: cleaning type in bits 0 and 1 (0 vacuuming and mopping, 1 mopping, 2 vacuuming, 3 vacuuming before mopping), the area in square meters after which the mop pad is washed in bits 8 to 15 (0 washes per room, otherwise a multiple of 5) and the mop water level (1 to 3) from bit 16, which the app of this model does not use because it sets the mop water level with water_level. The value is the cleaning type plus 256 times the area plus 65536 times the water level. To change one part, send the complete value with the other parts unchanged
wash_stationNumberVacuum Extend - Wash StationValue mapping ["0"="Idle","1"="Washing","2"="Drying","3"="Go Washing","4"="Paused","5"="Washing And Refilling Water","6"="Refilling Water"]
hot_water_levelNumberGeneral Protocol - Mop Washing Water TemperatureValue mapping ["0"="Room Temperature","2"="Warm","3"="Hot"]
child_lockSwitchVacuum Extend - Child Lock
clean_cancelNumberVacuum Extend - Clean Cancel
carpet_recognitionNumberVacuum Extend - Carpet RecognitionValues 2, 4, 5 and 6 are reported while the ultrasonic sensor has an error; the Mi Home app then refuses to switch it on. Value mapping ["0"="Off","1"="On"]
smart_wash_switchSwitchVacuum Extend - Auto Mop Pad WashingOff keeps the robot from returning to the station to wash the mop pads during a cleaning task
carpet_escapeNumberVacuum Extend - Carpet Cleanup MethodUsed by the Mi Home app only while carpet_recognition is on. Value mapping ["1"="Avoid Carpets","2"="Vacuum Only On Carpets"]
clean_fluid_switchNumberVacuum Extend - Use DetergentAutomatic adding of detergent when washing the mop pads; the value 2 is reported while the auto water refilling and drainage device is not installed, which the Mi Home app then refuses to change. Value mapping ["0"="Off","1"="On","2"="Not Installed"]
drying_timeNumber:TimeVacuum Extend - Mop Pad Drying TimeDuration of the mop pad drying in the station, 2 to 4 hours as offered by the Mi Home app
mop_wash_modeNumberVacuum Extend - Mop Pad Washing ModeThe Mi Home app of this model only offers Daily and Deep. Value mapping ["0"="Water Saving","1"="Daily","2"="Deep"]
enableSwitchDo Not Disturb - Enable
start_timeStringDo Not Disturb - Start TimeTime of day in 24-hour format HH:MM, for example 22:00
end_timeStringDo Not Disturb - End TimeTime of day in 24-hour format HH:MM, for example 08:00
volumeNumber:DimensionlessAudio - Volume
voice_packet_idStringAudio - Voice Packet Id
voice_change_stateStringAudio - Voice Change State
time_zoneStringTime - Time Zone
timer_cleanStringTime - Timer CleanScheduled cleaning timers, separated by ;. Each timer is id-enabled-HH:MM-weekdays-repeat-mapId-mode-mop-areas; empty when no timer is set. Read-only: creating a timer needs the map and area ids of the robot, which the Mi Home app supplies
first_clean_timeNumberClean Logs - First Clean TimeUnix timestamp in seconds
total_clean_timeNumber:TimeClean Logs - Total Clean Time
total_clean_timesNumberClean Logs - Total Clean Times
total_clean_areaNumber:AreaClean Logs - Total Clean Area

Xiaomi Robot Vacuum S40C (xiaomi.vacuum.e101gb) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_dust_arrestSwitchRobot Cleaner - Auto Dust CollectionOnly available on models with the dust collection base station
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyOnly available on models with the dust collection base station. Value mapping ["1"="Once","2"="Twice","3"="Three Times"]
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningUsed by the app only when the carpet cleaning method is Adaptive. The released MIoT spec of these models does not list this property, the app writes it.
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstUsed by the app only when the carpet cleaning method is Adaptive. The released MIoT spec of these models does not list this property, the app writes it.
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Mijia Robot Vacuum 5 Pro (xiaomi.vacuum.ov21cn) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop Washing
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeThe H50 (xiaomi.vacuum.ov43gb) accepts 2 to 12 hours, the other models 2 to 4 hours. Value mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours","4"="5 Hours","5"="6 Hours","6"="7 Hours","7"="8 Hours","8"="9 Hours","9"="10 Hours","10"="11 Hours","11"="12 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
carpet_discriminateSwitchRobot Cleaner - Carpet DetectionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyNot available on the H50 (xiaomi.vacuum.ov43gb). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
sewage_tank_statusNumberBase Station - Dirty Water TankNot available on the H50 and H50 Pro (xiaomi.vacuum.ov43gb, xiaomi.vacuum.ov42gl); also not available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Value mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingOnly available on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn). Value mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum 5 Pro (xiaomi.vacuum.ov21gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop Washing
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeThe H50 (xiaomi.vacuum.ov43gb) accepts 2 to 12 hours, the other models 2 to 4 hours. Value mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours","4"="5 Hours","5"="6 Hours","6"="7 Hours","7"="8 Hours","8"="9 Hours","9"="10 Hours","10"="11 Hours","11"="12 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
carpet_discriminateSwitchRobot Cleaner - Carpet DetectionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyNot available on the H50 (xiaomi.vacuum.ov43gb). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
sewage_tank_statusNumberBase Station - Dirty Water TankNot available on the H50 and H50 Pro (xiaomi.vacuum.ov43gb, xiaomi.vacuum.ov42gl); also not available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Value mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingOnly available on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn). Value mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum 5 (xiaomi.vacuum.ov31gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop Washing
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeThe H50 (xiaomi.vacuum.ov43gb) accepts 2 to 12 hours, the other models 2 to 4 hours. Value mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours","4"="5 Hours","5"="6 Hours","6"="7 Hours","7"="8 Hours","8"="9 Hours","9"="10 Hours","10"="11 Hours","11"="12 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
carpet_discriminateSwitchRobot Cleaner - Carpet DetectionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyNot available on the H50 (xiaomi.vacuum.ov43gb). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
sewage_tank_statusNumberBase Station - Dirty Water TankNot available on the H50 and H50 Pro (xiaomi.vacuum.ov43gb, xiaomi.vacuum.ov42gl); also not available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Value mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingOnly available on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn). Value mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum H50 Pro (xiaomi.vacuum.ov42gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop Washing
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeThe H50 (xiaomi.vacuum.ov43gb) accepts 2 to 12 hours, the other models 2 to 4 hours. Value mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours","4"="5 Hours","5"="6 Hours","6"="7 Hours","7"="8 Hours","8"="9 Hours","9"="10 Hours","10"="11 Hours","11"="12 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
carpet_discriminateSwitchRobot Cleaner - Carpet DetectionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyNot available on the H50 (xiaomi.vacuum.ov43gb). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
sewage_tank_statusNumberBase Station - Dirty Water TankNot available on the H50 and H50 Pro (xiaomi.vacuum.ov43gb, xiaomi.vacuum.ov42gl); also not available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Value mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingOnly available on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn). Value mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum H50 (xiaomi.vacuum.ov43gb) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-start-mop-wash"="Start Mop Washing","vacuum-stop-mop-wash"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Selects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Area. The app offers a subset of these values. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalOnly shown by the app on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn) and the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Used when the interval type is By Time. The app offers 10, 15, 20 and 25 minutes
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
enable_mop_washSwitchRobot Cleaner - Wash Mop At Station
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop Washing
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
auto_mop_drySwitchRobot Cleaner - Auto Mop Drying
drying_timeNumberRobot Cleaner - Mop Drying TimeThe H50 (xiaomi.vacuum.ov43gb) accepts 2 to 12 hours, the other models 2 to 4 hours. Value mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours","4"="5 Hours","5"="6 Hours","6"="7 Hours","7"="8 Hours","8"="9 Hours","9"="10 Hours","10"="11 Hours","11"="12 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstNot available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl)
carpet_discriminateSwitchRobot Cleaner - Carpet DetectionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swingSwitchRobot Cleaner - Mop ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyNot available on the H50 (xiaomi.vacuum.ov43gb). Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush ExtensionNot available on the H50 (xiaomi.vacuum.ov43gb)
sewage_tank_statusNumberBase Station - Dirty Water TankNot available on the H50 and H50 Pro (xiaomi.vacuum.ov43gb, xiaomi.vacuum.ov42gl); also not available on the Robot Vacuum 5 (xiaomi.vacuum.ov31gl). Value mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingOnly available on the 5 Pro (xiaomi.vacuum.ov21gl, xiaomi.vacuum.ov21cn). Value mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum H40 (xiaomi.vacuum.ov51gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_dust_arrestSwitchRobot Cleaner - Auto Dust CollectionOnly available on models with the dust collection base station
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyOnly available on models with the dust collection base station. Value mapping ["1"="Once","2"="Twice","3"="Three Times"]
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningUsed by the app only when the carpet cleaning method is Adaptive. The released MIoT spec of these models does not list this property, the app writes it.
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstUsed by the app only when the carpet cleaning method is Adaptive. The released MIoT spec of these models does not list this property, the app writes it.
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum S40 Pro (xiaomi.vacuum.ov71gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
mop_outer_swingSwitchRobot Cleaner - Mop Extension
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyValue mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush Extension
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum S40 (xiaomi.vacuum.ov81gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_dust_arrestSwitchRobot Cleaner - Auto Dust CollectionOnly available on models with the dust collection base station
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyOnly available on models with the dust collection base station. Value mapping ["1"="Once","2"="Twice","3"="Three Times"]
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep CleaningUsed by the app only when the carpet cleaning method is Adaptive. The released MIoT spec of these models does not list this property, the app writes it.
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets FirstUsed by the app only when the carpet cleaning method is Adaptive. The released MIoT spec of these models does not list this property, the app writes it.
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Mijia Robot Vacuum 6 Max (xiaomi.vacuum.pv11cn) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Reset Edge Mop Life is only available on the 6 Max (xiaomi.vacuum.pv11gl). The empty water tank actions need the automatic water supply kit. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","roller-start-wash-roller"="Start Mop Washing","roller-stop-wash-roller"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-empty-base-station-water-tank"="Empty Base Station Water Tank","vacuum-empty-host-water-tank"="Empty Robot Water Tank","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Edge Mop Life","roller-reset-roller-life"="Reset Roller Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusThe values 22 and 23 are only in the spec of the 6 Pro (xiaomi.vacuum.pv21gl), 27 only in the spec of the 6 Max (xiaomi.vacuum.pv11gl). Value mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning","25"="Self Check","26"="Summoning","27"="Cleaning Summoned Area"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeThe pet mode of the spec is not offered by the app. Value mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General","3"="Housekeeper"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_wash_rollerSwitchRobot Cleaner - Wash Mop At StationThe app uses this property instead of Enable Mop Wash (siid 2, piid 28) on models with a roller mop
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeSelects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalUsed when the interval type is By Area. The app offers 10, 15, 20 (recommended) and 25 m2. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalUsed when the interval type is By Time. The app offers 10, 15, 20 (recommended) and 25 minutes
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
wash_mop_water_temperatureNumberRobot Cleaner - Mop Washing Water TemperatureHot water mop washing: the station heats the water for the warm and hot settings, smart adjusts the temperature during the task. Value mapping ["0"="Room Temperature","1"="Warm","2"="Hot","3"="Smart"]
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop WashingThe app only shows this option when the station reports it supports mop rewashing
use_detergentSwitchRobot Cleaner - Wash Mop With DetergentThe app only shows this option when the station reports an automatic water supply kit
detergent_depletion_reminderSwitchRobot Cleaner - Detergent Depletion ReminderThe app only shows this option when the station reports an automatic water supply kit
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
roller_outswingSwitchRobot Cleaner - Roller Mop ExtensionThe app uses this property instead of Mop Outer Swing (siid 2, piid 79) for the roller mop
mop_outer_swingSwitchRobot Cleaner - Edge Mop ExtensionSwings out the edge-cleaning mop pad. The spec of the 6 Pro (xiaomi.vacuum.pv21gl) lists it too, but the app only offers it on the 6 Max (xiaomi.vacuum.pv11gl)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyApplies to the roller mop, edge mop and side brush extension. Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush Extension
sewage_tank_statusNumberBase Station - Dirty Water TankValue mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
base_station_water_tank_statusNumberBase Station - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
sweep_ai_detectionSwitchRobot Cleaner - AI RecognitionEnables the AI object recognition of the camera. The Mi Home app hides the dirt recognition and real-scene photo options until this switch is on
dirt_detectionSwitchRobot Cleaner - AI Dirt Recognition
real_scene_captureSwitchRobot Cleaner - AI Real-Scene PhotosStores photos of AI-recognized objects that can be viewed on the map in the app
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life LevelEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
mop_left_timeNumber:TimeMop - Mop Left TimeEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
roller_life_levelNumber:DimensionlessRoller - Roller Life Level
roller_left_timeNumber:TimeRoller - Roller Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum 6 Max (xiaomi.vacuum.pv11gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Reset Edge Mop Life is only available on the 6 Max (xiaomi.vacuum.pv11gl). The empty water tank actions need the automatic water supply kit. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","roller-start-wash-roller"="Start Mop Washing","roller-stop-wash-roller"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-empty-base-station-water-tank"="Empty Base Station Water Tank","vacuum-empty-host-water-tank"="Empty Robot Water Tank","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Edge Mop Life","roller-reset-roller-life"="Reset Roller Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusThe values 22 and 23 are only in the spec of the 6 Pro (xiaomi.vacuum.pv21gl), 27 only in the spec of the 6 Max (xiaomi.vacuum.pv11gl). Value mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning","25"="Self Check","26"="Summoning","27"="Cleaning Summoned Area"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeThe pet mode of the spec is not offered by the app. Value mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General","3"="Housekeeper"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_wash_rollerSwitchRobot Cleaner - Wash Mop At StationThe app uses this property instead of Enable Mop Wash (siid 2, piid 28) on models with a roller mop
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeSelects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalUsed when the interval type is By Area. The app offers 10, 15, 20 (recommended) and 25 m2. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalUsed when the interval type is By Time. The app offers 10, 15, 20 (recommended) and 25 minutes
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
wash_mop_water_temperatureNumberRobot Cleaner - Mop Washing Water TemperatureHot water mop washing: the station heats the water for the warm and hot settings, smart adjusts the temperature during the task. Value mapping ["0"="Room Temperature","1"="Warm","2"="Hot","3"="Smart"]
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop WashingThe app only shows this option when the station reports it supports mop rewashing
use_detergentSwitchRobot Cleaner - Wash Mop With DetergentThe app only shows this option when the station reports an automatic water supply kit
detergent_depletion_reminderSwitchRobot Cleaner - Detergent Depletion ReminderThe app only shows this option when the station reports an automatic water supply kit
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
roller_outswingSwitchRobot Cleaner - Roller Mop ExtensionThe app uses this property instead of Mop Outer Swing (siid 2, piid 79) for the roller mop
mop_outer_swingSwitchRobot Cleaner - Edge Mop ExtensionSwings out the edge-cleaning mop pad. The spec of the 6 Pro (xiaomi.vacuum.pv21gl) lists it too, but the app only offers it on the 6 Max (xiaomi.vacuum.pv11gl)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyApplies to the roller mop, edge mop and side brush extension. Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush Extension
sewage_tank_statusNumberBase Station - Dirty Water TankValue mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
base_station_water_tank_statusNumberBase Station - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
sweep_ai_detectionSwitchRobot Cleaner - AI RecognitionEnables the AI object recognition of the camera. The Mi Home app hides the dirt recognition and real-scene photo options until this switch is on
dirt_detectionSwitchRobot Cleaner - AI Dirt Recognition
real_scene_captureSwitchRobot Cleaner - AI Real-Scene PhotosStores photos of AI-recognized objects that can be viewed on the map in the app
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life LevelEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
mop_left_timeNumber:TimeMop - Mop Left TimeEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
roller_life_levelNumber:DimensionlessRoller - Roller Life Level
roller_left_timeNumber:TimeRoller - Roller Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Mijia Robot Vacuum 6 Pro (xiaomi.vacuum.pv21cn) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Reset Edge Mop Life is only available on the 6 Max (xiaomi.vacuum.pv11gl). The empty water tank actions need the automatic water supply kit. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","roller-start-wash-roller"="Start Mop Washing","roller-stop-wash-roller"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-empty-base-station-water-tank"="Empty Base Station Water Tank","vacuum-empty-host-water-tank"="Empty Robot Water Tank","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Edge Mop Life","roller-reset-roller-life"="Reset Roller Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusThe values 22 and 23 are only in the spec of the 6 Pro (xiaomi.vacuum.pv21gl), 27 only in the spec of the 6 Max (xiaomi.vacuum.pv11gl). Value mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning","25"="Self Check","26"="Summoning","27"="Cleaning Summoned Area"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeThe pet mode of the spec is not offered by the app. Value mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General","3"="Housekeeper"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_wash_rollerSwitchRobot Cleaner - Wash Mop At StationThe app uses this property instead of Enable Mop Wash (siid 2, piid 28) on models with a roller mop
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeSelects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalUsed when the interval type is By Area. The app offers 10, 15, 20 (recommended) and 25 m2. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalUsed when the interval type is By Time. The app offers 10, 15, 20 (recommended) and 25 minutes
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
wash_mop_water_temperatureNumberRobot Cleaner - Mop Washing Water TemperatureHot water mop washing: the station heats the water for the warm and hot settings, smart adjusts the temperature during the task. Value mapping ["0"="Room Temperature","1"="Warm","2"="Hot","3"="Smart"]
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop WashingThe app only shows this option when the station reports it supports mop rewashing
use_detergentSwitchRobot Cleaner - Wash Mop With DetergentThe app only shows this option when the station reports an automatic water supply kit
detergent_depletion_reminderSwitchRobot Cleaner - Detergent Depletion ReminderThe app only shows this option when the station reports an automatic water supply kit
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
roller_outswingSwitchRobot Cleaner - Roller Mop ExtensionThe app uses this property instead of Mop Outer Swing (siid 2, piid 79) for the roller mop
mop_outer_swingSwitchRobot Cleaner - Edge Mop ExtensionSwings out the edge-cleaning mop pad. The spec of the 6 Pro (xiaomi.vacuum.pv21gl) lists it too, but the app only offers it on the 6 Max (xiaomi.vacuum.pv11gl)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyApplies to the roller mop, edge mop and side brush extension. Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush Extension
sewage_tank_statusNumberBase Station - Dirty Water TankValue mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
base_station_water_tank_statusNumberBase Station - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
sweep_ai_detectionSwitchRobot Cleaner - AI RecognitionEnables the AI object recognition of the camera. The Mi Home app hides the dirt recognition and real-scene photo options until this switch is on
dirt_detectionSwitchRobot Cleaner - AI Dirt Recognition
real_scene_captureSwitchRobot Cleaner - AI Real-Scene PhotosStores photos of AI-recognized objects that can be viewed on the map in the app
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life LevelEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
mop_left_timeNumber:TimeMop - Mop Left TimeEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
roller_life_levelNumber:DimensionlessRoller - Roller Life Level
roller_left_timeNumber:TimeRoller - Roller Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum 6 Pro (xiaomi.vacuum.pv21gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Reset Edge Mop Life is only available on the 6 Max (xiaomi.vacuum.pv11gl). The empty water tank actions need the automatic water supply kit. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","roller-start-wash-roller"="Start Mop Washing","roller-stop-wash-roller"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-empty-base-station-water-tank"="Empty Base Station Water Tank","vacuum-empty-host-water-tank"="Empty Robot Water Tank","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Edge Mop Life","roller-reset-roller-life"="Reset Roller Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusThe values 22 and 23 are only in the spec of the 6 Pro (xiaomi.vacuum.pv21gl), 27 only in the spec of the 6 Max (xiaomi.vacuum.pv11gl). Value mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning","25"="Self Check","26"="Summoning","27"="Cleaning Summoned Area"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeThe pet mode of the spec is not offered by the app. Value mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General","3"="Housekeeper"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_wash_rollerSwitchRobot Cleaner - Wash Mop At StationThe app uses this property instead of Enable Mop Wash (siid 2, piid 28) on models with a roller mop
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeSelects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalUsed when the interval type is By Area. The app offers 10, 15, 20 (recommended) and 25 m2. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalUsed when the interval type is By Time. The app offers 10, 15, 20 (recommended) and 25 minutes
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
wash_mop_water_temperatureNumberRobot Cleaner - Mop Washing Water TemperatureHot water mop washing: the station heats the water for the warm and hot settings, smart adjusts the temperature during the task. Value mapping ["0"="Room Temperature","1"="Warm","2"="Hot","3"="Smart"]
repeat_wash_mopSwitchRobot Cleaner - Repeat Mop WashingThe app only shows this option when the station reports it supports mop rewashing
use_detergentSwitchRobot Cleaner - Wash Mop With DetergentThe app only shows this option when the station reports an automatic water supply kit
detergent_depletion_reminderSwitchRobot Cleaner - Detergent Depletion ReminderThe app only shows this option when the station reports an automatic water supply kit
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
roller_outswingSwitchRobot Cleaner - Roller Mop ExtensionThe app uses this property instead of Mop Outer Swing (siid 2, piid 79) for the roller mop
mop_outer_swingSwitchRobot Cleaner - Edge Mop ExtensionSwings out the edge-cleaning mop pad. The spec of the 6 Pro (xiaomi.vacuum.pv21gl) lists it too, but the app only offers it on the 6 Max (xiaomi.vacuum.pv11gl)
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyApplies to the roller mop, edge mop and side brush extension. Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush Extension
sewage_tank_statusNumberBase Station - Dirty Water TankValue mapping ["0"="Not Full","1"="Full"]
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
base_station_water_tank_statusNumberBase Station - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
water_tank_statusNumberRobot Cleaner - Water Tank StatusValue mapping ["0"="Not Empty","1"="Empty"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
sweep_ai_detectionSwitchRobot Cleaner - AI RecognitionEnables the AI object recognition of the camera. The Mi Home app hides the dirt recognition and real-scene photo options until this switch is on
dirt_detectionSwitchRobot Cleaner - AI Dirt Recognition
real_scene_captureSwitchRobot Cleaner - AI Real-Scene PhotosStores photos of AI-recognized objects that can be viewed on the map in the app
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life LevelEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
mop_left_timeNumber:TimeMop - Mop Left TimeEdge-cleaning mop pad. Only available on the 6 Max (xiaomi.vacuum.pv11gl)
roller_life_levelNumber:DimensionlessRoller - Roller Life Level
roller_left_timeNumber:TimeRoller - Roller Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum 6 (xiaomi.vacuum.pv32gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","roller-start-wash-roller"="Start Mop Washing","roller-stop-wash-roller"="Stop Mop Washing","vacuum-back-mop-wash"="Return To Wash Mop","vacuum-start-dry"="Start Mop Drying","vacuum-stop-dry"="Stop Mop Drying","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","roller-reset-roller-life"="Reset Roller Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusValue mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","24"="Go Charging In Station Assisted Cleaning"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeValue mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General","3"="Housekeeper"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_wash_rollerSwitchRobot Cleaner - Wash Mop At StationThe app uses this property instead of Enable Mop Wash (siid 2, piid 28) on models with a roller mop
frequency_mop_washNumberRobot Cleaner - Mop Washing Interval TypeSelects whether the robot returns to wash the mop by room, by area or by time. The interval is set with the area or time channel. Value mapping ["0"="By Room","1"="By Area","2"="By Time"]
frequency_mop_wash_no_tankNumberRobot Cleaner - Mop Washing Area IntervalUsed when the interval type is By Area. The app offers 10, 15, 20 (recommended) and 25 m2. Value mapping ["0"="5 m2","1"="10 m2","2"="8 m2","3"="15 m2","4"="20 m2","5"="25 m2"]
frequency_mop_wash_by_timeNumber:TimeRobot Cleaner - Mop Washing Time IntervalUsed when the interval type is By Time. The app offers 10, 15, 20 (recommended) and 25 minutes
water_output_for_washing_mopNumberRobot Cleaner - Mop Washing Water OutputValue mapping ["0"="Deep","1"="Daily","2"="Save Water"]
wash_mop_water_temperatureNumberRobot Cleaner - Mop Washing Water TemperatureHot water mop washing: the station heats the water for the warm and hot settings, smart adjusts the temperature during the task. Value mapping ["0"="Room Temperature","1"="Warm","2"="Hot","3"="Smart"]
use_detergentSwitchRobot Cleaner - Wash Mop With DetergentThe app only shows this option when the station reports an automatic water supply kit
drying_timeNumberRobot Cleaner - Mop Drying TimeValue mapping ["1"="2 Hours","2"="3 Hours","3"="4 Hours"]
auto_dust_arrestSwitchRobot Cleaner - Auto Dust Collection
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
roller_outswingSwitchRobot Cleaner - Roller Mop ExtensionThe app uses this property instead of Mop Outer Swing (siid 2, piid 79) for the roller mop
mop_outer_swing_frequencyNumberRobot Cleaner - Mop Extension FrequencyApplies to the roller mop and side brush extension. Value mapping ["1"="Every 7 Cleanings","2"="Every Cleaning"]
brush_outswingSwitchRobot Cleaner - Side Brush Extension
host_water_tank_statusNumberRobot Cleaner - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed","4"="Not Installed"]
base_station_water_tank_statusNumberBase Station - Water Tank EmptyingValue mapping ["0"="Idle","1"="Emptying","2"="Emptying Completed","3"="Emptying Failed"]
drying_progressNumber:DimensionlessRobot Cleaner - Drying Progress
dry_left_timeNumber:TimeRobot Cleaner - Dry Left Time
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life Level
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left Time
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
obstacle_avoidance_strategyNumberRobot Cleaner - Obstacle Avoidance StrategyValue mapping ["0"="Less Collisions","1"="High Coverage"]
sweep_ai_detectionSwitchRobot Cleaner - AI RecognitionEnables the AI object recognition of the camera. The Mi Home app hides the dirt recognition and real-scene photo options until this switch is on
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
roller_life_levelNumber:DimensionlessRoller - Roller Life Level
roller_left_timeNumber:TimeRoller - Roller Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum S60+ (xiaomi.vacuum.pv51gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Start Dust Collection and Reset Dust Bag Life are only available on the S60+ (xiaomi.vacuum.pv51gl). Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusThe values 22 to 24 (station assisted cleaning) are listed in the spec, but the app does not offer that function on these models. Value mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning","25"="Self Check","26"="Summoning","27"="Cleaning Summoned Area"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeThe app does not offer the housekeeper mode on these models; the spec also lists a pet mode that is not offered either. Value mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_dust_arrestSwitchRobot Cleaner - Auto Dust CollectionOnly available on the S60+ (xiaomi.vacuum.pv51gl)
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyOnly available on the S60+ (xiaomi.vacuum.pv51gl). Value mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
vibration_mop_switchSwitchRobot Cleaner - Vibratory Mopping
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life LevelOnly available on the S60+ (xiaomi.vacuum.pv51gl)
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left TimeOnly available on the S60+ (xiaomi.vacuum.pv51gl)
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Xiaomi Robot Vacuum S60 (xiaomi.vacuum.pv81gl) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsStart Cleaning uses the cleaning type set with the sweep_mop_type channel. Start Dust Collection and Reset Dust Bag Life are only available on the S60+ (xiaomi.vacuum.pv51gl). Value mapping ["vacuum-start-sweep"="Start Cleaning","vacuum-stop-sweeping"="Stop Cleaning","vacuum-pause-sweeping"="Pause Cleaning","vacuum-continue-sweep"="Resume Cleaning","vacuum-start-build-map"="Start Mapping","vacuum-pause-build-map"="Pause Mapping","vacuum-continue-build-map"="Resume Mapping","vacuum-stop-build-map-and-gocharge"="Stop Mapping And Go Charging","vacuum-stop-and-gocharge"="Stop And Go Charging","vacuum-start-dust-arrest"="Start Dust Collection","vacuum-try-listen"="Test Voice","identify-identify"="Find Robot","mop-reset-mop-life"="Reset Mop Life","brush-cleaner-reset-brush-life"="Reset Main Brush Life","brush-cleaner-reset-brush-life1"="Reset Side Brush Life","filter-reset-filter-life"="Reset Filter Life","dust-bag-reset-dust-bag-life"="Reset Dust Bag Life"]
vacuum_frameware_versionStringRobot Cleaner - Firmware Version
statusNumberRobot Cleaner - StatusThe values 22 to 24 (station assisted cleaning) are listed in the spec, but the app does not offer that function on these models. Value mapping ["1"="Idle","2"="Charging","3"="Charging Paused","4"="Sweeping","5"="Paused","6"="Go Charging","7"="Go Washing","8"="Remote Control","9"="Charging Completed","10"="Building Map","11"="Updating","12"="Multi Task Station Working","13"="Multi Task Recharge","14"="Station Working","15"="Error","16"="Sweeping And Mopping","17"="Mopping","18"="Mapping Paused","19"="Go Charging Paused","20"="Washing Paused","21"="Go Charging While Building Map","22"="Station Assisting Cleaning","23"="Station Assisted Cleaning Completed","24"="Go Charging In Station Assisted Cleaning","25"="Self Check","26"="Summoning","27"="Cleaning Summoned Area"]
faultNumberRobot Cleaner - Device Fault
sweep_mop_typeNumberRobot Cleaner - Cleaning TypeValue mapping ["1"="Sweep","2"="Mop","3"="Sweep And Mop","4"="Sweep Before Mopping"]
sweep_typeNumberRobot Cleaner - Cleaning ScopeValue mapping ["1"="Whole House","2"="Zone","3"="Room","4"="Edge","5"="Custom","6"="Spot","7"="Custom Area","8"="Scheduled","9"="Linked","10"="Fast","11"="AI Hosted"]
cleaning_areaNumber:AreaRobot Cleaner - Cleaning Area
cleaning_timeNumber:TimeRobot Cleaner - Cleaning Time
clean_timesNumberRobot Cleaner - Number Of CleaningsValue mapping ["1"="Once","2"="Twice","3"="Three Times"]
modeNumberRobot Cleaner - Suction LevelValue mapping ["1"="Silent","2"="Standard","3"="Strong","4"="Turbo"]
mop_water_output_levelNumberRobot Cleaner - Mop Water LevelValue mapping ["0"="Off","1"="Level 1","2"="Level 2","3"="Level 3"]
mop_statusSwitchRobot Cleaner - Mop Installed
last_clean_timeNumberRobot Cleaner - Last Clean TimeUnix timestamp in seconds
worry_free_clean_modeNumberRobot Cleaner - Shortcut Cleaning ModeThe app does not offer the housekeeper mode on these models; the spec also lists a pet mode that is not offered either. Value mapping ["0"="Low-Noise","1"="Deep Cleaning","2"="General"]
carpet_boostSwitchRobot Cleaner - Carpet Boost
sweep_break_switchSwitchRobot Cleaner - Resume After Charging
auto_dust_arrestSwitchRobot Cleaner - Auto Dust CollectionOnly available on the S60+ (xiaomi.vacuum.pv51gl)
dust_arrest_frequencyNumberRobot Cleaner - Dust Collection FrequencyOnly available on the S60+ (xiaomi.vacuum.pv51gl). Value mapping ["1"="Once","2"="Twice","3"="Three Times"]
carpet_deep_cleaningSwitchRobot Cleaner - Carpet Deep Cleaning
sweep_carpet_firstSwitchRobot Cleaner - Vacuum Carpets First
carpet_discriminateSwitchRobot Cleaner - Carpet Detection
vibration_mop_switchSwitchRobot Cleaner - Vibratory Mopping
sweep_mop_statusNumberRobot Cleaner - Current TaskValue mapping ["0"="Idle","1"="Sweeping","2"="Mopping"]
cleaning_progressNumber:DimensionlessRobot Cleaner - Cleaning Progress
dust_bag_life_levelNumber:DimensionlessDust Bag - Dust Bag Life LevelOnly available on the S60+ (xiaomi.vacuum.pv51gl)
dust_bag_left_timeNumber:TimeDust Bag - Dust Bag Left TimeOnly available on the S60+ (xiaomi.vacuum.pv51gl)
carpet_cleaning_methodNumberRobot Cleaner - Carpet Cleaning MethodValue mapping ["0"="Adaptive","1"="Avoid","2"="Ignore","3"="Cross"]
sweep_routeNumberRobot Cleaner - Cleaning PathValue mapping ["1"="Quick","2"="Standard","3"="Deep"]
battery_levelNumber:DimensionlessBattery - Battery Level
charging_stateNumberBattery - Charging StateValue mapping ["1"="Charging","2"="Not Charging","3"="Not Chargeable"]
voltageNumberBattery - Voltage
volumeNumber:DimensionlessAudio - Volume
physical_controls_lockedSwitchChild Lock
current_physical_control_lockSwitchChild Lock - Current State
mop_life_levelNumber:DimensionlessMop - Mop Life Level
mop_left_timeNumber:TimeMop - Mop Left Time
no_disturbSwitchDo Not Disturb
current_no_disturbSwitchDo Not Disturb - Active
brush_life_levelNumber:DimensionlessMain Cleaning Brush - Brush Life Level
brush_left_timeNumber:TimeMain Cleaning Brush - Brush Left Time
brush_life_level1Number:DimensionlessSide Cleaning Brush - Brush Life Level
brush_left_time1Number:TimeSide Cleaning Brush - Brush Left Time
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_left_timeNumber:TimeFilter - Filter Left Time

Mijia Smart Water Purifier N800G (xiaomi.waterpuri.cmn800) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="Idle","1"="Purifying","2"="Cleaning","3"="Error","4"="Holiday Cleaning"]
faultNumberFaultValue mapping ["0"="No Fault","1"="Water Running Too Long","2"="Power Fault","3"="Water Shortage","4"="Sensor Fault"]
temperatureNumber:TemperatureWater Temperature
tds_outNumber:DimensionlessTDS Out
filter_life_ppcNumber:DimensionlessPPC Filter Life
filter_life_roNumber:DimensionlessRO Filter Life
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it
pipeline_connectionSwitchDispenser ModeFor a connected water dispenser
holiday_modeSwitchHoliday Mode
anti_icing_remindSwitchLow Temperature Notification
no_production_water_timeSwitchLong IdleOn when no water was produced for a long time
no_disturbSwitchDo Not Disturb
no_disturb_periodStringDo Not Disturb PeriodStart and end time as HHMMHHMM, for example 22000700
reset_statusNumberReset StatusValue mapping ["0"="Reset Completed","1"="Device Needs Reset","2"="App Needs Reset"]

Uclean Smart Toilet Seat (xjx.toilet.pro) Channels ​

ChannelTypeDescriptionComment
seatedSwitchSeated
rear_washSwitchRear WashStarts with the current rear wash settings; link the rear wash level, position, moving and massage channels so their values are known.
bidetSwitchBidetStarts with the current bidet settings; link the bidet level, position, moving and massage channels so their values are known.
drySwitchDryStarts with the dryer temperature; link the dryer temperature channel so its value is known.
seat_temperatureNumberSeat HeatingValue mapping ["0"="Off","1"="Low","2"="Medium","3"="High"]
night_lightSwitchNight Light
deodorizationSwitchDeodorizationON starts the deodorization.
self_cleanSwitchSelf CleanON starts the nozzle self clean; only when nobody is seated.
rear_water_temperatureNumberRear Wash Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_pressureNumberRear Wash Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_wash_positionNumberRear Wash PositionValue mapping ["1"="Position 1","2"="Position 2","3"="Position 3"]
bidet_water_temperatureNumberBidet Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_pressureNumberBidet Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_positionNumberBidet PositionValue mapping ["1"="Position 1","2"="Position 2","3"="Position 3"]
movingSwitchMoving Wash
massageNumberMassageOnly Normal and Continuous can be set.
dryer_temperatureNumberDryer TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
filter_days_leftNumber:TimeFilter Days Left

Uclean Smart Toilet pure (xjx.toilet.pure) Channels ​

ChannelTypeDescriptionComment
seatedSwitchSeated
rear_washSwitchRear Wash
bidetSwitchBidet
drySwitchDry
seat_heatingSwitchSeat Heating
night_lightSwitchNight Light
seat_temperatureNumberSeat TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_temperatureNumberRear Wash Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_pressureNumberRear Wash Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_temperatureNumberBidet Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_pressureNumberBidet Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
dryer_temperatureNumberDryer TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
self_cleanSwitchSelf CleanON starts the nozzle self clean; only when nobody is seated.
flushSwitchFlushON flushes the toilet; only when nobody is seated.
foam_shieldSwitchFoam ShieldON applies the foam shield. Not available on xjx.toilet.pure.

Uclean Smart Toilet relax (xjx.toilet.relax) Channels ​

ChannelTypeDescriptionComment
seatedSwitchSeated
rear_washSwitchRear Wash
bidetSwitchBidet
drySwitchDry
seat_heatingSwitchSeat Heating
night_lightSwitchNight Light
seat_temperatureNumberSeat TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_temperatureNumberRear Wash Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_pressureNumberRear Wash Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_temperatureNumberBidet Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_pressureNumberBidet Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
dryer_temperatureNumberDryer TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
self_cleanSwitchSelf CleanON starts the nozzle self clean; only when nobody is seated.
flushSwitchFlushON flushes the toilet; only when nobody is seated.
foam_shieldSwitchFoam ShieldON applies the foam shield. Not available on xjx.toilet.pure.

Whale Spout Smart Toilet Zero (xjx.toilet.zero) Channels ​

ChannelTypeDescriptionComment
seatedSwitchSeated
rear_washSwitchRear Wash
bidetSwitchBidet
drySwitchDry
seat_heatingSwitchSeat Heating
night_lightSwitchNight Light
seat_temperatureNumberSeat TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_temperatureNumberRear Wash Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
rear_water_pressureNumberRear Wash Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_temperatureNumberBidet Water TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
bidet_water_pressureNumberBidet Water PressureValue mapping ["1"="Low","2"="Medium","3"="High"]
dryer_temperatureNumberDryer TemperatureValue mapping ["1"="Low","2"="Medium","3"="High"]
self_cleanSwitchSelf CleanON starts the nozzle self clean; only when nobody is seated.
flushSwitchFlushON flushes the toilet; only when nobody is seated.
foam_shieldSwitchFoam ShieldON applies the foam shield. Not available on xjx.toilet.pure.
ChannelTypeDescriptionComment
powerSwitchLight
brightnessDimmerBrightnessSets the brightness of the active light mode (normal or night light).
color_temperatureNumber:TemperatureColor Temperature
night_lightSwitchNight LightWrite only. ON switches the light on in night light mode, OFF switches it to the normal light.
nightlight_brightnessNumber:DimensionlessNight Light BrightnessSet with the brightness channel while the night light is on.
light_off_timerNumber:TimeLight Off Timer
heater_modeStringHeater ModeA mode keeps running until it is switched off or the heater timer ends.
heater_timerNumber:TimeHeater TimerRemaining time until the heater mode switches off. Can only be set while a mode is running; 0 cancels the timer.
target_temperatureNumber:TemperatureTarget TemperatureUsed in Heater mode.
temperatureNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
fan_levelNumberFan LevelWrite only. Sets the fan level of the running mode; Turbo is only available in Air Change mode.
swingStringSwingValue mapping ["swing"="Swing","stop"="Fixed"]
swing_angleNumber:AngleWind DirectionFixed air outlet angle, used when swing is off.
ChannelTypeDescriptionComment
powerSwitchLight
brightnessDimmerBrightnessSets the brightness of the active light mode (normal or night light).
color_temperatureNumber:TemperatureColor Temperature
night_lightSwitchNight LightWrite only. ON switches the light on in night light mode, OFF switches it to the normal light.
nightlight_brightnessNumber:DimensionlessNight Light BrightnessSet with the brightness channel while the night light is on.
light_off_timerNumber:TimeLight Off Timer
heater_modeStringHeater ModeA mode keeps running until it is switched off or the heater timer ends.
heater_timerNumber:TimeHeater TimerRemaining time until the heater mode switches off. Can only be set while a mode is running; 0 cancels the timer.
target_temperatureNumber:TemperatureTarget TemperatureUsed in Heater mode.
temperatureNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
fan_levelNumberFan LevelWrite only. Sets the fan level of the running mode; Turbo is only available in Air Change mode.
swingStringSwingValue mapping ["swing"="Swing","stop"="Fixed"]
swing_angleNumber:AngleWind DirectionFixed air outlet angle, used when swing is off.
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","light-brightness-up"="Light Brightness Up","light-brightness-down"="Light Brightness Down"]
onSwitchLight - Power
modeNumberLight - ModeValue mapping ["0"="Day","1"="Night Light"]
brightnessDimmerLight - Brightness
color_temperatureNumber:TemperatureLight - Color Temperature
ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","light-brightness-up"="Light Brightness Up","light-brightness-down"="Light Brightness Down"]
onSwitchLight - Power
modeNumberLight - ModeValue mapping ["0"="Day","1"="Night Light"]
brightnessDimmerLight - Brightness
color_temperatureNumber:TemperatureLight - Color Temperature
on1SwitchAmbient Light - Power
mode1NumberAmbient Light - ModeValue mapping ["1"="Color","3"="HSV"]
brightness1DimmerAmbient Light - Brightness
color_temperature1Number:TemperatureAmbient Light - Color Temperature
colorColorAmbient Light - Color
saturabilityNumber:DimensionlessAmbient Light - Saturation
flowSwitchAmbient Light - Color Flow
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
onSwitchPower
modeNumberModeValue mapping ["0"="Day","1"="Night Light"]
brightnessDimmerBrightness
color_temperatureNumber:TemperatureColor Temperature
flex_switchSwitchFlex Switch
init_power_optNumberPower-On StateValue mapping ["1"="On","2"="Off"]
save_stateNumberRemember Last StateValue mapping ["0"="Disable","1"="Enable"]
fast_scene_switchNumberFast Scene SwitchingValue mapping ["0"="Disable","1"="Enable"]
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
ambientBrightnessDimmerAmbient Brightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["light-toggle"="Light Toggle","fan-toggle"="Fan Toggle","yl-light-brightness-cycle"="Light Brightness Cycle","yl-light-ct-cycle"="Light Color Temperature Cycle","yl-light-fan-gears-cycle"="Fan Level Cycle (Light Service)","yl-light-birghtness-increase"="Light Brightness Increase","yl-light-brightness-decrease"="Light Brightness Decrease","yl-light-ct-increase"="Light Color Temperature Increase","yl-light-ct-decrease"="Light Color Temperature Decrease","yl-light-on-or-bright-cycle"="Light On Or Brightness Cycle","yl-light-on-or-ct-cycle"="Light On Or Color Temperature Cycle","yl-fan-fan-gears-cycle"="Fan Level Cycle"]
onSwitchLight - Power
modeNumberLight - ModeValue mapping ["0"="Day","1"="Night Light"]
brightnessDimmerLight - Brightness
color_temperatureNumber:TemperatureLight - Color Temperature
flowNumberLight - FlowValue mapping ["0"="Auto"]
off_delay_timeNumber:TimeLight - Off Delay
left_timeNumber:TimeLight - Remaining Off Delay
on1SwitchFan - Power
fan_levelNumberFan - LevelValue mapping ["0"="Level 1","1"="Level 2","2"="Level 3","3"="Level 4"]
mode1NumberFan - ModeValue mapping ["0"="Normal Wind","1"="Natural Wind","2"="Reverse Wind","3"="Strong Wind","4"="Gentle Wind","5"="Sleep Wind"]
statusNumberFan - StatusValue mapping ["0"="Idle","1"="Busy"]
faultNumberFan - Device FaultValue mapping ["0"="No faults"]
off_delay_time1Number:TimeFan - Off Delay
left_time1Number:TimeFan - Remaining Off Delay
init_power_optNumberLight - Power-On StateValue mapping ["1"="On","2"="Off"]
smart_switch_enSwitchLight - Wall Switch Control
miband_sleep_ctrlNumberLight - Mi Band Sleep ControlValue mapping ["0"="Mi Band Control Off","1"="Turn Off Light When Asleep","2"="Turn Off Fan When Asleep","3"="Turn Off Light And Fan When Asleep","4"="Sleep Wind Mode When Asleep","5"="Turn Off Light And Sleep Wind Mode When Asleep"]
fan_init_power_optNumberFan - Power-On StateValue mapping ["0"="Off","1"="On"]
smart_switch_en1SwitchFan - Wall Switch Control
fan_speedNumber:DimensionlessFan - Speed
sleep_delay_offNumber:TimeFan - Sleep Delay Off
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
ambientBrightnessDimmerAmbient Brightness
ambientPowerSwitchAmbient Power
ambientColorColorAmbient Color
ambientColorTemperatureNumber:TemperatureAmbient Color Temperature
ambientColorflowSwitchAmbient Color Flow
ambientColorflowSceneStringAmbient Color Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
ambientColorModeNumberAmbient Color ModeValue mapping ["1"="RGB mode","2"="CT mode","3"="HSV mode"]
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["light-toggle"="Toggle","colorful-light-fx-next"="Next Effect","yeelight-brightness-up"="Brightness Up","yeelight-brightness-down"="Brightness Down"]
onSwitchPower
modeNumberModeValue mapping ["0"="Normal","1"="Music"]
brightnessDimmerBrightness
colorColorColor
init_power_optNumberPower-On StateValue mapping ["1"="On","2"="Off"]
save_stateNumberRemember Last StateValue mapping ["0"="Disable","1"="Enable"]
strip_lengthNumberStrip Length
length_detectedSwitchLength Detected
ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
rgbColorColorRGB Color
colorModeNumberColor ModeOnly RGB mode and CT mode can be set. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflowSwitchColor Flow
colorflowSceneStringColor Flow SceneValue mapping ["sunrise"="Sunrise","sunset"="Sunset","home"="Home","tea_time"="Tea Time","date_night"="Date Night","movie"="Movie","romance"="Romance","night_mode"="Night Mode","candle_flicker"="Candle Flicker","happy_birthday"="Happy Birthday","christmas"="Christmas","disco"="Disco","rgb"="RGB","lsd"="Psychedelic","temp"="Color Temperature Cycle","strobe"="Strobe","strobe_color"="Color Strobe","alarm"="Alarm","police"="Police","police2"="Police 2"]
nameStringName
ChannelTypeDescriptionComment
onSwitchSwitch 1
default_powerNumberSwitch 1 - Power-On StateValue mapping ["0"="Off","1"="On"]
off_delayNumber:TimeSwitch 1 - Off DelayThe switch turns off after this time
on1SwitchSwitch 2
default_power1NumberSwitch 2 - Power-On StateValue mapping ["0"="Off","1"="On"]
off_delay1Number:TimeSwitch 2 - Off DelayThe switch turns off after this time
interlockSwitchInterlockOnly one of the two switches can be on at the same time
smart_switchSwitchSmart Switch ModeKeeps the relay on and uses the wall switch only as a button for smart lights
remote_listStringPaired Remotes

Yilai Ceiling Light Aiyue 480 (yilai.light.ceiling1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode

Yilai Ceiling Lamp Hefeng 430 (yilai.light.ceiling2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode

Yilai Ceiling Lamp Hefeng Pro (yilai.light.ceiling3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
brightnessDimmerBrightness
delayoffNumber:TimeShutdown Timer
colorTemperatureNumber:TemperatureColor Temperature
colorModeNumberColor ModeOnly CT mode can be set here, use the nightlightMode channel for the night light. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
nameStringName
nightlightBrightnessDimmerNightlight BrightnessSetting a value switches the light to night light mode
nightlightModeSwitchNight Light ModeSwitching off returns the light to CT mode

Xiaomi Smart Kettle 2 Pro (yunmi.kettle.v19) Channels ​

ChannelTypeDescriptionComment
statusNumberStatusValue mapping ["0"="Standby","1"="Heating","2"="Boiling","3"="Cooling","4"="Keep Warm"]
faultNumberFault
temperatureNumber:TemperatureWater Temperature
heatingStringHeatingStart sends the target temperature, mode and keep warm settings together, as the app does; link those channels
target_temperatureNumber:TemperatureTarget Temperature
target_modeNumberModeValue mapping ["0"="Heat","1"="Boil"]
auto_keep_warmSwitchKeep Warm
keep_warm_temperatureNumber:TemperatureKeep Warm Temperature
keep_warm_timeNumber:TimeKeep Warm Time
warming_timeNumber:TimeKeep Warm Elapsed Time
kettle_liftingSwitchKettle Lifted
no_disturbSwitchDo Not Disturb
custom_knob_tempSwitchCustom Knob Temperature
lift_remember_tempSwitchRemember Temperature After Lifting
boiling_reminderSwitchBoiling Reminder
keep_warm_reminderSwitchKeep Warm Reminder

Mi Water Purifier lx2 (yunmi.waterpuri.lx2) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx3) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier lx4 (yunmi.waterpuri.lx4) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier 1A/400G Pro (yunmi.waterpuri.lx5) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
temperatureNumber:TemperatureInlet Water Temperature
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
tds_warn_thdNumber:DimensionlessTDS Warning ThresholdNotice when TDS Out is above this value
lightModeNumberLight ModeValue mapping ["0"="Simple Mode","1"="Special Mode"]
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx6) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier 500G/500G Pro (yunmi.waterpuri.lx7) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
temperatureNumber:TemperatureInlet Water Temperature
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
tds_warn_thdNumber:DimensionlessTDS Warning ThresholdNotice when TDS Out is above this value
lightModeNumberLight ModeValue mapping ["0"="Simple Mode","1"="Special Mode"]
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier 600G (yunmi.waterpuri.lx8) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
lightModeNumberLight ModeValue mapping ["0"="Simple Mode","1"="Special Mode"]
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier D1 (yunmi.waterpuri.lx9) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
temperatureNumber:TemperatureInlet Water Temperature
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedtimeNumber:TimeFilter 3 Used Time
tds_warn_thdNumber:DimensionlessTDS Warning ThresholdThe app does not use it for these models
uv_workingSwitchUV SterilizationOnly yunmi.waterpuri.lx10
plmachineSwitchPipeline Machine SupportOnly yunmi.waterpuri.lx12

Mi Water Purifier lx10 (yunmi.waterpuri.lx10) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
temperatureNumber:TemperatureInlet Water Temperature
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedtimeNumber:TimeFilter 3 Used Time
tds_warn_thdNumber:DimensionlessTDS Warning ThresholdThe app does not use it for these models
uv_workingSwitchUV SterilizationOnly yunmi.waterpuri.lx10
plmachineSwitchPipeline Machine SupportOnly yunmi.waterpuri.lx12

Mi Water Purifier C1 (Triple Setting) (yunmi.waterpuri.lx11) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
temperatureNumber:TemperatureInlet Water Temperature
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedtimeNumber:TimeFilter 3 Used Time
tds_warn_thdNumber:DimensionlessTDS Warning ThresholdThe app does not use it for these models
uv_workingSwitchUV SterilizationOnly yunmi.waterpuri.lx10
plmachineSwitchPipeline Machine SupportOnly yunmi.waterpuri.lx12

Mi Water Purifier S1 (yunmi.waterpuri.lx12) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
temperatureNumber:TemperatureInlet Water Temperature
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedtimeNumber:TimeFilter 3 Used Time
tds_warn_thdNumber:DimensionlessTDS Warning ThresholdThe app does not use it for these models
uv_workingSwitchUV SterilizationOnly yunmi.waterpuri.lx10
plmachineSwitchPipeline Machine SupportOnly yunmi.waterpuri.lx12

Mi Water Purifier v1 (yunmi.waterpurifier.v1) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier v2 (yunmi.waterpurifier.v2) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier (Under sink) v3 (yunmi.waterpurifier.v3) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Mi Water Purifier v4 (yunmi.waterpurifier.v4) Channels ​

ChannelTypeDescriptionComment
run_statusNumberError CodeBit field: 0 temperature anomaly, 1 meter damaged, 2 flow sensor anomaly, 3 filter life expired, 4 network connection error, 5 EEPROM communication error, 6 RFID communication error, 7 faucet communication error, 8 purified water flow error, 9 water leak, 10 floater error, 11 TDS error, 12 water temperature too high, 13 recovery rate error, 14 water quality anomaly, 15 pump thermal protection
rinseSwitchRinsing
tds_inNumber:DimensionlessTDS InShown in the app as mg/L, which equals ppm for water
tds_outNumber:DimensionlessTDS OutShown in the app as mg/L, which equals ppm for water
f1_totalflowNumberFilter 1 Total Flow
f1_totaltimeNumber:TimeFilter 1 Total Time
f1_usedflowNumberFilter 1 Used Flow
f1_usedtimeNumber:TimeFilter 1 Used TimeRemaining filter life is (total time - used time) / total time
f2_totalflowNumberFilter 2 Total Flow
f2_totaltimeNumber:TimeFilter 2 Total Time
f2_usedflowNumberFilter 2 Used Flow
f2_usedtimeNumber:TimeFilter 2 Used Time
f3_totalflowNumberFilter 3 Total Flow
f3_totaltimeNumber:TimeFilter 3 Total Time
f3_usedflowNumberFilter 3 Used Flow
f3_usedtimeNumber:TimeFilter 3 Used Time
f4_totalflowNumberFilter 4 Total Flow
f4_totaltimeNumber:TimeFilter 4 Total Time
f4_usedflowNumberFilter 4 Used Flow
f4_usedtimeNumber:TimeFilter 4 Used Time
maintenance_stateNumberMaintenance StateOnly yunmi.waterpuri.lx4
maintenance_intervalNumber:TimeUnused TimeOnly yunmi.waterpuri.lx4
filter_resetStringReset FilterResets the remaining life of the selected filter, only after replacing it

Smartmi Ventilation System (zhimi.airfresh.va2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["interval"="Interval","silent"="Night","low"="Level 1","middle"="Level 2","strong"="Level 3","auto"="Auto"]
humidityNumber:DimensionlessHumidity
co2Number:DimensionlessCO2
child_lockSwitchChild Lock
alarmSwitchNotification Sound
aqiNumber:DensityPM2.5
average_aqiNumber:DensityAverage PM2.5
filter_hoursNumber:TimeFilter Hours Used
used_hoursNumber:TimeRun Time
motor_speedNumberMotor Speed
led_levelNumberIndicator Light BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
temperatureNumber:TemperatureTemperature

Smartmi Fresh Air System (Heating) (zhimi.airfresh.va4) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
heaterSwitchHeater
modeStringModeValue mapping ["interval"="Interval","silent"="Night","low"="Level 1","middle"="Level 2","strong"="Level 3","auto"="Auto"]
humidityNumber:DimensionlessHumidity
co2Number:DimensionlessCO2
child_lockSwitchChild Lock
alarmSwitchNotification Sound
aqiNumber:DensityPM2.5
average_aqiNumber:DensityAverage PM2.5
filter_hoursNumber:TimeFilter Hours Used
used_hoursNumber:TimeRun Time
motor_speedNumberMotor Speed
led_levelNumberIndicator Light BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
temperatureNumber:TemperatureTemperature

Mi Fresh Air Ventilator C1-80 (zhimi.airfresh.ua1) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["filter-reset-filter-life"="Reset Filter Life"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
heaterSwitchHeater
filter_used_timeNumber:TimeFilter Used Time
filter_life_levelNumber:DimensionlessFilter Life Level
physical_controls_lockedSwitchChild Lock
alarmSwitchNotification Sound
brightnessDimmerIndicator Light Brightness
motor_a_speed_rpmNumberMotor A Speed
motor_b_speed_rpmNumberMotor B Speed
temperatureNumber:TemperatureTemperature

Mi PM2.5 Air Quality Monitor (zhimi.airmonitor.v1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
aqiNumberAir Quality Index
batteryNumberBattery
usb_stateSwitchUSB Power Connected
time_stateSwitchShow Clock
night_stateSwitchNight Mode
night_beginNumberNight Mode Start TimeSeconds after midnight (28800 is 08:00).
night_endNumberNight Mode End TimeSeconds after midnight (28800 is 08:00).

Xiaomi Smart Air Purifier 4 Compact (zhimi.airp.cpa4) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode"]
onSwitchPower
faultNumberAir Purifier - Device FaultValue mapping ["0"="No Faults","1"="Motor Speed Error","2"="Motor Blocked","3"="Particle Sensor Error"]
modeNumberAir Purifier - ModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_densityNumber:DensityEnvironment - PM2 5 Density
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_used_timeNumber:TimeFilter - Filter Used Time
filter_left_timeNumber:TimeFilter - Filter Left Time
alarmSwitchAlarm - Alarm
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
brightnessNumberScreen - BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
motor_speed_rpmNumberCustom Service - Motor Speed Rpm
country_codeNumberCustom Service - Country CodeValue mapping ["17230"="CN","17749"="EU","21843"="US","21576"="TH","19024"="JP","19282"="KR","21591"="TW","18766"="IN"]
favorite_levelNumberCustom Service - Favorite LevelFavorite mode speed level 0-14; the Mi Home app shows the recommended room coverage from 2-3 m2 (level 0) to 16-27 m2 (level 14)

Mi Air Purifier 3/3H (zhimi.airp.mb3a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["button-toggle"="Toggle Power","button-toggle-mode"="Toggle Mode"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Run Error","2"="Motor Stuck","3"="No Sensor","4"="Humidity Sensor Error","5"="Temperature Sensor Error"]
onSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual","3"="Fan Level"]
pm2_5_densityNumber:DensityPM2.5 Density
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_max_timeNumber:TimeFilter Maximum Life
alarmSwitchNotification Sound
brightnessNumberLED BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
motor_set_speedNumberMotor Target Speed
favorite_speedNumberFavorite Mode Motor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-14
use_timeNumber:TimeDevice Use Time
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Best","1"="Good","2"="Normal","3"="Bad","4"="Worse","5"="Unhealthy"]
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
iic_error_countNumberI2C Error Count
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
country_codeNumberCountry CodeValue mapping ["91"="IN","44"="EU","852"="HK","886"="TW","82"="KR","1"="US","81"="JP"]
temperature_display_unitNumberTemperature Display UnitValue mapping ["0"="Celsius","1"="Fahrenheit"]

Mi Air Purifier 3C (zhimi.airp.mb4a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["filter-reset-filter-life"="Reset Filter Life"]
onSwitchPower
faultStringAir Purifier - Device Fault
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_densityNumber:DensityEnvironment - PM2 5 Density
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_used_timeNumber:TimeFilter - Filter Used Time
alarmSwitchAlarm - Alarm
brightnessNumberScreen - BrightnessValue mapping ["0"="Off","3"="Dim","8"="Bright"]
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
motor_speed_rpmNumberCustom Service - Motor Speed Rpm
miio_lib_versionStringCustom Service - Miio Lib Version
favorite_speedNumberCustom Service - Favorite Speed

Xiaomi Smart Air Purifier 4 (zhimi.airp.mb5) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature Sensor Error","3"="Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
anionSwitchAnion (Negative Ion)
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_left_timeNumber:TimeFilter Remaining Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
temperature_display_unitNumberTemperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberMotor Speed
favorite_speedNumberFavorite Mode Motor Speed
motor_set_speedNumberMotor Target Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-11; the Mi Home app shows the recommended room coverage from 5-9 m2 (level 0) to 28-48 m2 (level 11)
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
country_codeNumberCountry CodeValue mapping ["2"="EU","1"="US","82"="KR","886"="TW","66"="TH","44"="UK","91"="IN"]
iic_error_countNumberI2C Error Count
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Good (Low)","1"="Good (High)","2"="Medium (Low)","3"="Medium (High)","4"="Bad (Low)","5"="Bad (High)"]

Xiaomi Smart Air Purifier 4 (zhimi.airp.mb5a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature Sensor Error","3"="Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
anionSwitchAnion (Negative Ion)
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_left_timeNumber:TimeFilter Remaining Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
temperature_display_unitNumberTemperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberMotor Speed
favorite_speedNumberFavorite Mode Motor Speed
motor_set_speedNumberMotor Target Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-11; the Mi Home app shows the recommended room coverage from 5-9 m2 (level 0) to 28-48 m2 (level 11)
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
country_codeNumberCountry CodeValue mapping ["2"="EU","1"="US","82"="KR","886"="TW","66"="TH","44"="UK","91"="IN"]
iic_error_countNumberI2C Error Count
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Good (Low)","1"="Good (High)","2"="Medium (Low)","3"="Medium (High)","4"="Bad (Low)","5"="Bad (High)"]

Xiaomi Smart Air Purifier Elite (zhimi.airp.meb1) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature/Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
plasmaSwitchPlasma Ionizer
uvSwitchUV Light
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
pm10_densityNumber:DensityPM10 Density
air_qualityNumberAir QualityValue mapping ["0"="Excellent","1"="Good","2"="Moderate","3"="Poor","4"="Heavy Pollution","5"="Hazardous"]
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
favorite_levelNumberFavorite Mode Level
temperature_display_unitNumberTemperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberMotor Speed
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
iic_error_countNumberI2C Error Count
country_codeNumberCountry CodeValue mapping ["17230"="CN","17749"="EU","21843"="US","21591"="TW","19282"="KR","21835"="UK"]

Xiaomi Smart Air Purifier 4 Lite (zhimi.airp.rmb1) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode"]
onSwitchPower
faultNumberAir Purifier - Device FaultValue mapping ["0"="No Faults","1"="Motor Speed Error","2"="Motor Blocked","3"="Particle Sensor Error"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
relative_humidityNumber:DimensionlessEnvironment - Relative Humidity
pm2_5_densityNumber:DensityEnvironment - PM2 5 Density
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_used_timeNumber:TimeFilter - Filter Used Time
filter_left_timeNumber:TimeFilter - Filter Left Time
alarmSwitchAlarm - Alarm
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
brightnessNumberScreen - BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
temperature_display_unitNumberDevice Display Unit - Temperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberCustom Service - Moto Speed Rpm
country_codeNumberCustom Service - Country CodeValue mapping ["2"="EU","1"="US","82"="KR","886"="TW","66"="TH","44"="UK","91"="IN"]
favorite_levelNumberCustom Service - Favorite LevelFavorite mode speed level 0-14; the Mi Home app shows the recommended room coverage from 3-4 m2 (level 0) to 27-46 m2 (level 14)

Xiaomi Smart Air Purifier 4 Pro (zhimi.airp.va2) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature Sensor Error","3"="Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
anionSwitchAnion (Negative Ion)
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_left_timeNumber:TimeFilter Remaining Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
motor_speed_rpmNumberMotor Speed
favorite_speedNumberFavorite Mode Motor Speed
motor_set_speedNumberMotor Target Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-11; the Mi Home app shows the recommended room coverage from 7-12 m2 (level 0) to 35-60 m2 (level 11)
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
iic_error_countNumberI2C Error Count
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Good (Low)","1"="Good (High)","2"="Medium (Low)","3"="Medium (High)","4"="Bad (Low)","5"="Bad (High)"]

Xiaomi Smart Air Purifier 4 Pro (zhimi.airp.va2a) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Particle Sensor Error","2"="Temperature Sensor Error","3"="Humidity Sensor Error","4"="No Filter Installed"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
anionSwitchAnion (Negative Ion)
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_left_timeNumber:TimeFilter Remaining Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
motor_speed_rpmNumberMotor Speed
favorite_speedNumberFavorite Mode Motor Speed
motor_set_speedNumberMotor Target Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-11; the Mi Home app shows the recommended room coverage from 7-12 m2 (level 0) to 35-60 m2 (level 11)
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
iic_error_countNumberI2C Error Count
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Good (Low)","1"="Good (High)","2"="Medium (Low)","3"="Medium (High)","4"="Bad (Low)","5"="Bad (High)"]

Xiaomi Smart Air Purifier 4 Pro (zhimi.airp.vb4) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","filter-reset-filter-life"="Reset Filter Life","custom-service-toggle-mode"="Toggle Mode","custom-service-toggle-fan-level"="Toggle Fan Level"]
onSwitchPower
faultNumberAir Purifier - Device FaultValue mapping ["0"="No Faults","1"="Sensor PM Error","2"="Temp Error","3"="Hum Error","4"="No Filter"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="Manual"]
fan_levelNumberAir Purifier - Fan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
anionSwitchAir Purifier - Anion
relative_humidityNumber:DimensionlessEnvironment - Relative Humidity
pm2_5_densityNumber:DensityEnvironment - PM2 5 Density
temperatureNumber:TemperatureTemperature
pm10_densityNumber:DensityEnvironment - PM10 Density
filter_life_levelNumber:DimensionlessFilter - Filter Life Level
filter_used_timeNumber:TimeFilter - Filter Used Time
filter_left_timeNumber:TimeFilter - Filter Left Time
alarmSwitchAlarm
physical_controls_lockedSwitchPhysical Control Locked
brightnessNumberBrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
temperature_display_unitNumberTemperature Display UnitValue mapping ["1"="Celsius","2"="Fahrenheit"]
motor_speed_rpmNumberMotor Speed Rpm
favorite_speedNumberFavorite Speed
motor_set_speedNumberMotor Set Speed
favorite_levelNumberFavorite Level
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="REASON-HW-BOOT","1"="REASON-USER-REBOOT","2"="REASON-UPDATE","3"="REASON-WDT"]
manual_levelNumberManual LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
country_codeNumberCountry CodeValue mapping ["2"="EU","1"="US","82"="KR","886"="TW","66"="TH","44"="UK","91"="IN"]
purify_volumeNumber:VolumeAqi - Purify Volume
average_aqiNumberAqi - Average Aqi
aqi_stateNumberAqi - Aqi StateValue mapping ["0"="AQI-GOOD-L","1"="AQI-GOOD-H","2"="AQI-MID-L","3"="AQI-MID-H","4"="AQI-BAD-L","5"="AQI-BAD-H"]

Mi Air Purifier 2 (mini) (zhimi.airpurifier.m1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier 2 (zhimi.airpurifier.m2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier 2S (zhimi.airpurifier.ma1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier 2S (zhimi.airpurifier.ma2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringMode
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
brightDimmerLED Brightness
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite Level
temperatureNumber:TemperatureTemperature
purifyvolumeNumberPurivied Volume
childlockSwitchChild Lock

Mi Air Purifier 3 (zhimi.airpurifier.ma4) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["button-toggle"="Toggle Power","button-toggle-mode"="Toggle Mode"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Run Error","2"="Motor Stuck","3"="No Sensor","4"="Humidity Sensor Error","5"="Temperature Sensor Error"]
onSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual","3"="Fan Level"]
pm2_5_densityNumber:DensityPM2.5 Density
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_max_timeNumber:TimeFilter Maximum Life
alarmSwitchNotification Sound
brightnessNumberLED BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
motor_set_speedNumberMotor Target Speed
favorite_speedNumberFavorite Mode Motor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-14
use_timeNumber:TimeDevice Use Time
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Best","1"="Good","2"="Normal","3"="Bad","4"="Worse","5"="Unhealthy"]
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
iic_error_countNumberI2C Error Count
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]

Mi Air Purifier 2S (zhimi.airpurifier.mb1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["button-toggle"="Toggle Power","button-toggle-mode"="Toggle Mode"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Run Error","2"="Motor Stuck","3"="No Sensor","4"="Humidity Sensor Error","5"="Temperature Sensor Error"]
onSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual","3"="Fan Level"]
pm2_5_densityNumber:DensityPM2.5 Density
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_max_timeNumber:TimeFilter Maximum Life
alarmSwitchNotification Sound
brightnessNumberLED BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
motor_set_speedNumberMotor Target Speed
favorite_speedNumberFavorite Mode Motor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-14
use_timeNumber:TimeDevice Use Time
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Best","1"="Good","2"="Normal","3"="Bad","4"="Worse","5"="Unhealthy"]
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
iic_error_countNumberI2C Error Count
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]
country_codeNumberCountry CodeValue mapping ["91"="IN","44"="EU","852"="HK","886"="TW","82"="KR"]
temperature_display_unitNumberTemperature Display UnitValue mapping ["0"="Celsius","1"="Fahrenheit"]

Mi Air Purifier 3C (zhimi.airpurifier.mb4) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
faultStringFault
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual"]
pm2_5_densityNumber:DensityPM2.5 Density
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
alarmSwitchNotification Sound
brightnessNumberScreen BrightnessValue mapping ["8"="Bright","3"="Dim","0"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
miio_lib_versionStringMIIO Library Version
favorite_speedNumberFavorite Mode Motor SpeedThe 15 favorite mode levels of the app, sent as motor speed

Mi Air Purifier 2S (zhimi.airpurifier.mc1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier 2H (zhimi.airpurifier.mc2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Xiaomi Smart Air Purifier 4 Lite (zhimi.airpurifier.rma1) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["air-purifier-toggle"="Toggle Power","custom-service-toggle-mode"="Toggle Mode"]
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Speed Error","2"="Motor Blocked","3"="Particle Sensor Error"]
modeNumberModeValue mapping ["0"="Auto","1"="Sleep","2"="Manual"]
relative_humidityNumber:DimensionlessRelative Humidity
pm2_5_densityNumber:DensityPM2.5 Density
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_left_timeNumber:TimeFilter Left Time
alarmSwitchNotification Sound
physical_controls_lockedSwitchChild Lock
brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
motor_speed_rpmNumberMotor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-14; the Mi Home app shows the recommended room coverage from 3-4 m2 (level 0) to 27-46 m2 (level 14)

Mi Air Purifier Super (zhimi.airpurifier.sa1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier MAX / MAX Pro (zhimi.airpurifier.sa2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier v1 (zhimi.airpurifier.v1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringMode
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
brightnessDimmerBrightness
ledSwitchLED Status
act_detSwitchAir AutoDetect
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterliveNumberFilter Life

Mi Air Purifier v2 (zhimi.airpurifier.v2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier v3 (zhimi.airpurifier.v3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier v5 (zhimi.airpurifier.v5) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
buzzerSwitchBuzzer Status
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite LevelValue mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperatureNumber:TemperatureTemperature
purifyvolumeNumber:VolumePurified Volume
childlockSwitchChild Lock

Mi Air Purifier Pro v6 (zhimi.airpurifier.v6) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringMode
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
ledSwitchLED Status
brightDimmerLED Brightness
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
usedhoursNumber:TimeRun Time
motorspeedNumberMotor Speed
filterlifeNumberFilter Life
favoritelevelNumberFavorite Level
temperatureNumber:TemperatureTemperature
purifyvolumeNumberPurivied Volume
childlockSwitchChild Lock

Mi Air Purifier Pro v7 (zhimi.airpurifier.v7) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringMode
humidityNumber:DimensionlessHumidity
aqiNumberAir Quality Index
averageaqiNumberAverage Air Quality Index
volumeNumberVolume
ledSwitchLED Status
illuminanceNumberIlluminance
filtermaxlifeNumberFilter Max Life
filterhoursNumber:TimeFilter Hours used
motorspeedNumberMotor Speed
motorspeed2NumberMotor Speed 2
filterlifeNumberFilter Life
favoritelevelNumberFavorite Level
temperatureNumber:TemperatureTemperature
childlockSwitchChild Lock

Mi Air Purifier Pro H (zhimi.airpurifier.va1) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["button-toggle"="Toggle Power","button-toggle-mode"="Toggle Mode"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Run Error","2"="Motor Stuck","3"="No Sensor","4"="Humidity Sensor Error","5"="Temperature Sensor Error","6"="Timer Error 1","7"="Timer Error 2"]
onSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual","3"="Fan Level"]
pm2_5_densityNumber:DensityPM2.5 Density
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_max_timeNumber:TimeFilter Maximum Life
alarmSwitchNotification SoundSets the volume to 50 (on) or 0 (off), as the app does
brightnessNumberLED BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
motor_set_speedNumberMotor Target Speed
favorite_speedNumberFavorite Mode Motor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-9
use_timeNumber:TimeDevice Use Time
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Best","1"="Good","2"="Normal","3"="Bad","4"="Worse","5"="Unhealthy"]
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]

Mi Air Purifier Pro H (zhimi.airpurifier.vb2) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["button-toggle"="Toggle Power","button-toggle-mode"="Toggle Mode"]
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Run Error","2"="Motor Stuck","3"="No Sensor","4"="Humidity Sensor Error","5"="Temperature Sensor Error","6"="Timer Error 1","7"="Timer Error 2"]
onSwitchPower
fan_levelNumberFan LevelValue mapping ["1"="Level1","2"="Level2","3"="Level3"]
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual","3"="Fan Level"]
pm2_5_densityNumber:DensityPM2.5 Density
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_max_timeNumber:TimeFilter Maximum Life
alarmSwitchNotification SoundSets the volume to 50 (on) or 0 (off), as the app does
brightnessNumberLED BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
motor_set_speedNumberMotor Target Speed
favorite_speedNumberFavorite Mode Motor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-9
use_timeNumber:TimeDevice Use Time
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
aqi_stateNumberAQI StateValue mapping ["0"="Best","1"="Good","2"="Normal","3"="Bad","4"="Worse","5"="Unhealthy"]
bottom_doorSwitchBottom Door
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
manual_levelNumberManual Mode LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3"]

Smartmi Air Purifier (zhimi.airpurifier.za1) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
faultNumberFaultValue mapping ["0"="No Faults","1"="Motor Run Error","2"="Motor Stuck","3"="No Sensor","4"="Humidity Sensor Error","5"="Temperature Sensor Error"]
modeNumberModeValue mapping ["0"="Auto","1"="Night","2"="Manual"]
air_qualityNumberTVOC Air Quality
pm2_5_densityNumber:DensityPM2.5 Density
relative_humidityNumber:DimensionlessRelative Humidity
temperatureNumber:TemperatureTemperature
filter_life_levelNumber:DimensionlessFilter Life Level
filter_used_timeNumber:TimeFilter Used Time
filter_max_timeNumber:TimeFilter Maximum Life
alarmSwitchNotification Sound
brightnessNumberLED BrightnessValue mapping ["0"="Bright","1"="Dim","2"="Off"]
physical_controls_lockedSwitchChild Lock
motor_speed_rpmNumberMotor Speed
favorite_levelNumberFavorite Mode LevelFavorite mode speed level 0-14
use_timeNumber:TimeDevice Use Time
purify_volumeNumber:VolumePurify Volume
average_aqiNumberAverage AQI
reboot_causeNumberReboot CauseValue mapping ["0"="Hardware Boot","1"="User Reboot","2"="Update","3"="Watchdog Timer"]
country_codeNumberCountry CodeValue mapping ["1"="US","2"="CA","3"="SG","4"="EU","5"="AU","6"="KR","7"="CN","8"="FR","9"="JP","10"="TW"]
gesture_statusSwitchGesture Recognition

Mi Standing Fan (zhimi.fan.sa1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
acPowerSwitchAC Power
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Mi Smart Fan (zhimi.fan.v1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
temp_decNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
batteryNumberBattery
acPowerSwitchAC Power
modeStringBattery Charge State
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Smartmi DC Pedestal Fan (zhimi.fan.v2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
temp_decNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
batteryNumberBattery
acPowerSwitchAC Power
modeStringBattery Charge State
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Smartmi DC Pedestal Fan (zhimi.fan.v3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
temp_decNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
batteryNumberBattery
acPowerSwitchAC Power
modeStringBattery Charge State
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Smartmi Inverter Pedestal Fan (zhimi.fan.za1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
acPowerSwitchAC Power
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Smartmi Standing Fan 2 (zhimi.fan.za3) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Smartmi Standing Fan 2S (zhimi.fan.za4) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
speedLevelDimmerFan Speed
naturalLevelDimmerNatural Wind SpeedSetting a value switches to natural wind; 0 while in standard mode
angleEnableSwitchOscillation
angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
poweroffTimeNumber:TimePower-Off Timer
buzzerSwitchNotification Sound
led_bNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
child_lockSwitchChild Lock
speedNumberMotor Speed
usedhoursNumber:TimeRun Time

Smartmi Standing Fan 3 (zhimi.fan.za5) Channels ​

ChannelTypeDescriptionComment
onSwitchPower
speed_levelDimmerFan Speed
fan_levelNumberFan LevelValue mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
modeNumberModeValue mapping ["0"="Natural","1"="Standard"]
horizontal_swingSwitchOscillation
horizontal_angleNumber:AngleOscillation AngleValue mapping ["30"="30","60"="60","90"="90","120"="120"]
moveStringMove DirectionWrite only. Turns the fan head a step; only accepted while oscillation is off
off_delayNumber:TimePower-Off Timer
alarmSwitchNotification Sound
brightnessDimmerScreen Brightness
physical_controls_lockedSwitchChild Lock
anionSwitchNegative Ion Mode
temperature_sensingSwitchTemperature-Sensing Mode
temperatureNumber:TemperatureTemperature
relative_humidityNumber:DimensionlessHumidity
speed_nowNumberMotor Speed
button_pressNumberButton PressedValue mapping ["0"="None","1"="Power","2"="Swing"]
battery_stateSwitchBattery Installed
ac_stateSwitchAC Power Connected

Mi Smart Space Heater S (zhimi.heater.ma2) Channels ​

ChannelTypeDescriptionComment
onSwitchHeater - Switch Status
faultNumberHeater - FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperatureNumber:TemperatureHeater - Target Temperature
countdown_timeNumber:TimeCountdown - Countdown Time
temperatureNumber:TemperatureEnvironment - Temperature
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
alarmSwitchAlarm - Alarm
brightnessNumber:DimensionlessIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
hw_enableSwitchPrivate Service - Hw Enable
use_timeNumber:TimePrivate Service - Use Time

Mi Smart Baseboard Heater E (zhimi.heater.ma3) Channels ​

ChannelTypeDescriptionComment
actionsStringActionsValue mapping ["private-service-toggle-switch"="Toggle Private Service"]
onSwitchHeater - Switch Status
faultNumberHeater - FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperatureNumber:TemperatureHeater - Target Temperature
modeNumberHeater - ModeValue mapping ["0"="Auto","1"="LL Mode","2"="HH Mode"]
countdown_timeNumber:TimeCountdown - Countdown Time
temperatureNumber:TemperatureEnvironment - Temperature
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
alarmSwitchAlarm - Alarm
brightnessNumber:DimensionlessIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
use_timeNumber:TimePrivate Service - Use Time

Mi Smart Space Heater S (zhimi.heater.mc2) Channels ​

ChannelTypeDescriptionComment
onSwitchHeater - Power
faultNumberHeater - Device FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperatureNumber:TemperatureHeater - Target Temperature
countdown_timeNumber:TimeCountdown - Countdown Time
temperatureNumber:TemperatureEnvironment - Temperature
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
alarmSwitchAlarm - Alarm
brightnessNumberIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
hw_enableSwitchPrivate Service - Hw Enable
use_timeNumber:TimePrivate Service - Use Time
country_codeNumberPrivate Service - Country CodeValue mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]

Smartmi Smart Fan (zhimi.heater.na1) Channels ​

ChannelTypeDescriptionComment
onSwitchHeater - Power
faultNumberHeater - Device FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
heat_levelNumberHeater - Heat LevelValue mapping ["1"="High","2"="Low"]
modeNumberHeater - ModeValue mapping ["0"="Fan not swing","1"="Fan swing"]
alarmSwitchAlarm - Alarm
countdown_timeNumber:TimeCountdown - Countdown Time
brightnessNumberIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
return_to_middleSwitchPrivate Service - Return To Middle

Smartmi Smart Fan Heater (zhimi.heater.nb1) Channels ​

ChannelTypeDescriptionComment
onSwitchHeater - Power
faultNumberHeater - Device FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
heat_levelNumberHeater - Heat LevelValue mapping ["1"="High","2"="Low"]
modeNumberHeater - ModeValue mapping ["0"="Fan not swing","1"="Fan swing"]
target_temperatureNumber:TemperatureHeater - Target Temperature
temperatureNumber:TemperatureEnvironment - Temperature
alarmSwitchAlarm - Alarm
countdown_timeNumber:TimeCountdown - Countdown Time
brightnessNumberIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical_controls_lockedSwitchPhysical Control Locked - Physical Control Locked
return_to_middleSwitchPrivate Service - Return To Middle
country_codeNumberPrivate Service - Country CodeValue mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]
hw_enSwitchPrivate Service - Hw En

Smartmi Radiant Heater Smart Version (zhimi.heater.za1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
target_temperatureNumber:TemperatureTarget Temperature
brightnessDimmerBrightness
buzzerSwitchBuzzer Status
relative_humidityNumber:DimensionlessRelative Humidity
childlockSwitchChild Lock
HWSwitchSwitchHW Switch
temperatureNumber:TemperatureTemperature
usedhoursNumber:TimeRun Time

Smartmi Smart Convector Heater 1S (zhimi.heater.za2) Channels ​

ChannelTypeDescriptionComment
faultNumberHeater - Device FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
onSwitchHeater - Power
target-temperatureNumber:TemperatureHeater - Target Temperature
alarmSwitchAlarm - Alarm
countdown-timeNumber:TimeCountdown - Countdown Time
relative-humidityNumber:DimensionlessEnvironment - Relative Humidity
temperatureNumber:TemperatureEnvironment - Temperature
brightnessNumberIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical-controls-lockedSwitchPhysical Control Locked - Physical Controls Locked
use-timeNumber:TimePrivate-Service - Use Time

Smartmi Smart Convector Heater 1S (zhimi.heater.zb1) Channels ​

ChannelTypeDescriptionComment
onSwitchHeater - Power
faultNumberHeater - Device FaultValue mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target-temperatureNumber:TemperatureHeater - Target Temperature
alarmSwitchAlarm - Alarm
countdown-timeNumber:TimeCountdown - Countdown Time
relative-humidityNumber:DimensionlessEnvironment - Relative Humidity
temperatureNumber:TemperatureEnvironment - Temperature
brightnessNumberIndicator Light - BrightnessValue mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical-controls-lockedSwitchPhysical Control Locked - Physical Controls Locked
use-timeNumber:TimePrivate-Service - Use Time
country-codeNumberPrivate-Service - Country-CodeValue mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]

Smartmi Evaporative Humidifier (zhimi.humidifier.ca1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["silent"="Silent","medium"="Medium","high"="High","auto"="Auto"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
led_brightnessNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
buzzerSwitchNotification Sound
water_levelNumber:DimensionlessWater Level-1 when the water tank is removed
drySwitchAir Drying ModeKeeps running for about 8 hours when the water runs out, to dry the wick
cleanSwitchClean ModeStarts the cleaning cycle; the app recommends cleaning at least once a week
use_timeNumber:TimeRun Time
speedNumberMotor Speed
temperatureNumber:TemperatureTemperature
child_lockSwitchChild Lock

Smartmi Evaporative Humidifer 2 (zhimi.humidifier.ca4) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeNumberModeValue mapping ["0"="Auto","1"="Level 1","2"="Level 2","3"="Level 3"]
faultNumberDevice Fault
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
water_levelNumber:DimensionlessWater Level-1 when the water tank is removed
led_brightnessNumberIndicator LightValue mapping ["0"="Off","1"="Dim","2"="Bright"]
buzzerSwitchNotification Sound
drySwitchAir Drying ModeKeeps running for about 8 hours when the water runs out, to dry the wick
use_timeNumber:TimeRun Time
power_timeNumber:TimePower-On Time
target_speedNumberTarget Motor Speed
speedNumberMotor Speed
temperatureNumber:TemperatureTemperature
child_lockSwitchChild Lock
cleanSwitchClean ModeStarts the cleaning cycle; the app recommends cleaning at least once a week

Smartmi Evaporative Humidifier 3 (zhimi.humidifier.ca6) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
faultNumberDevice Fault
modeNumberModeValue mapping ["0"="Max","1"="Auto","2"="Night"]
target_humidityNumber:DimensionlessTarget HumidityUsed in Auto mode
water_levelNumberWater LevelValue mapping ["0"="Low","1"="Normal","2"="Full"]
drySwitchAir Drying ModeKeeps running for about 3 hours when the water level is low
statusNumberStatusValue mapping ["1"="Off","2"="Humidifying","3"="Drying","4"="Cleaning"]
temperatureNumber:TemperatureTemperature
humidityNumber:DimensionlessHumidity
buzzerSwitchNotification Sound
led_brightnessNumberScreen BrightnessValue mapping ["0"="Off","1"="Dim","2"="Bright"]
child_lockSwitchChild Lock
speedNumberMotor Speed
cleanSwitchClean ModeSelf-cleaning for about 30 minutes; fill the water tank first
clean_time_leftNumber:TimeSelf-Cleaning Time Left

Smartmi Evaporative Humidifier (zhimi.humidifier.cb1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["silent"="Silent","medium"="Medium","high"="High","auto"="Auto"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
led_brightnessNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
buzzerSwitchNotification Sound
water_levelNumber:DimensionlessWater Level-1 when the water tank is removed
drySwitchAir Drying ModeKeeps running for about 8 hours when the water runs out, to dry the wick
use_timeNumber:TimeRun Time
speedNumberMotor Speed
temperatureNumber:TemperatureTemperature
child_lockSwitchChild Lock

Smartmi Evaporative Humidifier (zhimi.humidifier.cb2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["silent"="Silent","medium"="Medium","high"="High","auto"="Auto"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
led_brightnessNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
buzzerSwitchNotification Sound
water_levelNumber:DimensionlessWater Level-1 when the water tank is removed
drySwitchAir Drying ModeKeeps running for about 8 hours when the water runs out, to dry the wick
use_timeNumber:TimeRun Time
speedNumberMotor Speed
temperatureNumber:TemperatureTemperature
child_lockSwitchChild Lock

Smartmi Humidifier (zhimi.humidifier.v1) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
modeStringModeValue mapping ["silent"="Silent","medium"="Medium","high"="High"]
humidityNumber:DimensionlessHumidity
target_humidityNumber:DimensionlessTarget Humidity
aqiNumberAir Quality Index
trans_levelNumberTransmission Level
led_brightnessNumberIndicator LightValue mapping ["0"="Bright","1"="Dim","2"="Off"]
buzzerSwitchNotification Sound
use_timeNumber:TimeRun Time
speedNumberMotor Speed
temperatureNumber:TemperatureTemperature
child_lockSwitchChild Lock

Mi Smart Power Strip (zimi.powerstrip.v2) Channels ​

ChannelTypeDescriptionComment
powerSwitchPower
electric_powerNumber:PowerActive Power
ledSwitchIndicator Light
power_priceNumberPower PricePrice per kWh in hundredths of the currency unit (52 is 0.52), used by the Mi Home app for the cost statistics.
electric_currentNumber:ElectricCurrentCurrent
temperatureNumber:TemperatureTemperature
lp_autooffSwitchLow Power Auto OffWhen on, the power strip switches itself off when the power stays below Low Power Threshold for Low Power Delay. Sends all three low power values together, so link all three channels.
lp_autooff_delayNumber:TimeLow Power Delay5 to 60 minutes. Sends all three low power values together, so link all three channels.
lp_thresholdNumber:PowerLow Power Threshold2 to 99 W. Sends all three low power values together, so link all three channels.

Example Item File Roborock Vacuum ​

dsl
Group  gVac     "Xiaomi Robot Vacuum"      <fan>
Group  gVacStat "Status Details"           <status> (gVac)
Group  gVacCons "Consumables Usage"        <line-increase> (gVac)
Group  gVacDND  "Do Not Disturb Settings"  <moon> (gVac)
Group  gVacHist "Cleaning History"         <calendar> (gVac)
Group  gVacLast "Last Cleaning Details"       <calendar> (gVac)

String actionControl  "Vacuum Control"          {channel="miio:vacuum:034F0E45:actions#control" }
String actionCommand  "Vacuum Command"          {channel="miio:vacuum:034F0E45:actions#commands" }

Number statusBat    "Battery Level [%1.0f%%]" <battery>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#battery" }
Number statusArea    "Cleaned Area [%1.0fm²]" <zoom>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#clean_area" }
Number statusTime    "Cleaning Time [%1.0f']" <clock>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#clean_time" }
String  statusError    "Error [%s]"  <error>  (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#error_code" }
Number statusFanPow    "Fan Power [%1.0f%%]"  <signal>   (gVacStat) {channel="miio:vacuum:034F0E45:status#fan_power" }
Number statusClean    "In Cleaning Status [%1.0f]"   <switch>  (gVacStat) {channel="miio:vacuum:034F0E45:status#in_cleaning" }
Switch statusDND    "DND Activated"    (gVacStat) {channel="miio:vacuum:034F0E45:status#dnd_enabled" }
Number statusStatus    "Status [%1.0f]"  <status>  (gVacStat) {channel="miio:vacuum:034F0E45:status#state"}
Switch isLocating    "Locating"    (gVacStat) {channel="miio:vacuum:034F0E45:status#is_locating" }

Number consumableMain    "Main Brush [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#main_brush_time"}
Number consumableSide    "Side Brush [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#side_brush_time"}
Number consumableFilter    "Filter Time[%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#filter_time" }
Number consumableSensor    "Sensor [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#sensor_dirt_time"}

Switch dndFunction   "DND Function" <moon>   (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_function"}
String dndStart   "DND Start Time [%s]" <clock>   (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_start"}
String dndEnd   "DND End Time [%s]"   <clock-on>  (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_end"}

Number historyArea    "Total Cleaned Area [%1.0fm²]" <zoom>    (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_area"}
String historyTime    "Total Clean Time [%s]"   <clock>     (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_time"}
Number historyCount    "Total # Cleanings [%1.0f]"  <office>  (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_count"}

String lastStart   "Last Cleaning Start time [%s]" <clock> (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_start_time"}
String lastEnd     "Last Cleaning End time [%s]" <clock> (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_end_time"}
Number lastArea    "Last Cleaned Area [%1.0fm²]" <zoom>    (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_area"}
Number lastTime    "Last Clean Time [%1.0f']"   <clock>     (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_duration"}
Number lastError    "Error [%s]"  <error>  (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_error" }
Switch lastCompleted  "Last Cleaning Completed"    (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_finish" }

Image map "Cleaning Map" (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#map"}

Basic, Gateway and Lumi Things Item File Examples ​

Mi Air Frying Pan (careli.fryer.maf01) item file lines ​

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fryer "Mi Air Frying Pan" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

Mi Smart Air Fryer (3.5L) (careli.fryer.maf02) item file lines ​

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fryer "Mi Smart Air Fryer (3.5L)" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
String start_cook "Start Cooking With Settings" (G_fryer) {channel="miio:basic:fryer:start_cook"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
Number:Time work_time "Custom - Cooking Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Cooking Temperature" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Scheduled Start Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Scheduled Start Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
Number turn_pot "Custom - Turn Food Reminder" (G_fryer) {channel="miio:basic:fryer:turn_pot"}
String recipes "Recipes" (G_fryer) {channel="miio:basic:fryer:recipes"}

Mi Air Frying Pan (careli.fryer.maf03) item file lines ​

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fryer "Mi Air Frying Pan" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

Xiaomi Smart Air Fryer Pro 4L (careli.fryer.maf05a) item file lines ​

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fryer "Xiaomi Smart Air Fryer Pro 4L" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
String start_cook "Start Cooking With Settings" (G_fryer) {channel="miio:basic:fryer:start_cook"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Cooking Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Cooking Temperature" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Scheduled Start Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Scheduled Start Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Food" (G_fryer) {channel="miio:basic:fryer:turn_pot"}
Number turn_pot_cfg "Custom - Turn Food Reminder" (G_fryer) {channel="miio:basic:fryer:turn_pot_cfg"}
String recipes "Recipes" (G_fryer) {channel="miio:basic:fryer:recipes"}

Xiaomi Smart Air Fryer 6.5L (careli.fryer.maf10a) item file lines ​

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fryer "Xiaomi Smart Air Fryer 6.5L" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
Switch auto_keep_warm "Air Fryer - Auto Keep Warm" (G_fryer) {channel="miio:basic:fryer:auto_keep_warm"}
Switch current_keep_warm "Air Fryer - Keep Warm" (G_fryer) {channel="miio:basic:fryer:current_keep_warm"}
Number mode "Air Fryer - Mode" (G_fryer) {channel="miio:basic:fryer:mode"}
Switch preheat "Air Fryer - Preheat" (G_fryer) {channel="miio:basic:fryer:preheat"}
String recipe_id "Air Fryer - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Air Fryer - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number target_cooking_measure "Air Fryer - Food Quantity" (G_fryer) {channel="miio:basic:fryer:target_cooking_measure"}
Number turn_pot "Air Fryer - Turn Over Food" (G_fryer) {channel="miio:basic:fryer:turn_pot"}
Switch turn_pot_config "Air Fryer - Turn Over Reminder" (G_fryer) {channel="miio:basic:fryer:turn_pot_config"}
Number texture "Air Fryer - Texture" (G_fryer) {channel="miio:basic:fryer:texture"}
Number:Time reservation_left_time "Air Fryer - Scheduled Start Left Time" (G_fryer) {channel="miio:basic:fryer:reservation_left_time"}
Number cooking_weight "Air Fryer - Cooking Weight" (G_fryer) {channel="miio:basic:fryer:cooking_weight"}

Qingping Air Monitor Lite (cgllc.airm.cgd1st) item file lines ​

note: Autogenerated example. Replace the id (airm) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airm "Qingping Air Monitor Lite" <status>
Number:Dimensionless relative_humidity "Relative Humidity" (G_airm) {channel="miio:basic:airm:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airm) {channel="miio:basic:airm:pm2_5_density"}
Number:Density pm10_density "PM10 Density" (G_airm) {channel="miio:basic:airm:pm10_density"}
Number:Temperature temperature "Temperature" (G_airm) {channel="miio:basic:airm:temperature"}
Number:Dimensionless co2_density "CO2 Density" (G_airm) {channel="miio:basic:airm:co2_density"}
Number tvoc_density "TVOC Density" (G_airm) {channel="miio:basic:airm:tvoc_density"}
Number:Dimensionless battery_level "Battery Level" (G_airm) {channel="miio:basic:airm:battery_level"}
Number charging_state "Charging State" (G_airm) {channel="miio:basic:airm:charging_state"}
Number start_time "Screen Off Start Time" (G_airm) {channel="miio:basic:airm:start_time"}
Number end_time "Screen Off End Time" (G_airm) {channel="miio:basic:airm:end_time"}
Number monitoring_frequency "PM2.5 and PM10 Detection Frequency" (G_airm) {channel="miio:basic:airm:monitoring_frequency"}
Number screen_off "Screen Off After" (G_airm) {channel="miio:basic:airm:screen_off"}
String tempature_unit "Temperature Unit" (G_airm) {channel="miio:basic:airm:tempature_unit"}
Number screensaver_start "Screen Saver Start" (G_airm) {channel="miio:basic:airm:screensaver_start"}
Number screensaver_style "Screen Saver Style" (G_airm) {channel="miio:basic:airm:screensaver_style"}
Number auto_power_off "Auto Power Off (on Battery)" (G_airm) {channel="miio:basic:airm:auto_power_off"}
Number time_format "Screen Time Format" (G_airm) {channel="miio:basic:airm:time_format"}
Number grading_standard "Grading Standard" (G_airm) {channel="miio:basic:airm:grading_standard"}
String actions "Actions" (G_airm) {channel="miio:basic:airm:actions"}

Qingping Air Monitor Lite (cgllc.airm.cgdn1) item file lines ​

note: Autogenerated example. Replace the id (airm) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airm "Qingping Air Monitor Lite" <status>
Number:Dimensionless relative_humidity "Relative Humidity" (G_airm) {channel="miio:basic:airm:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airm) {channel="miio:basic:airm:pm2_5_density"}
Number:Density pm10_density "PM10 Density" (G_airm) {channel="miio:basic:airm:pm10_density"}
Number:Temperature temperature "Temperature" (G_airm) {channel="miio:basic:airm:temperature"}
Number:Dimensionless co2_density "CO2 Density" (G_airm) {channel="miio:basic:airm:co2_density"}
Number:Dimensionless battery_level "Battery Level" (G_airm) {channel="miio:basic:airm:battery_level"}
Number charging_state "Charging State" (G_airm) {channel="miio:basic:airm:charging_state"}
Number:ElectricPotential voltage "Battery Voltage" (G_airm) {channel="miio:basic:airm:voltage"}
String mac "MAC Address" (G_airm) {channel="miio:basic:airm:mac"}
Number start_time "Screen Off Start Time" (G_airm) {channel="miio:basic:airm:start_time"}
Number end_time "Screen Off End Time" (G_airm) {channel="miio:basic:airm:end_time"}
Number monitoring_frequency "PM2.5 and PM10 Detection Frequency" (G_airm) {channel="miio:basic:airm:monitoring_frequency"}
Number screen_off "Screen Off After" (G_airm) {channel="miio:basic:airm:screen_off"}
Number device_off "Power Off After (on Battery, Old Setting)" (G_airm) {channel="miio:basic:airm:device_off"}
String tempature_unit "Temperature Unit" (G_airm) {channel="miio:basic:airm:tempature_unit"}
Number screensaver_start "Screen Saver Start" (G_airm) {channel="miio:basic:airm:screensaver_start"}
Number screensaver_style "Screen Saver Style" (G_airm) {channel="miio:basic:airm:screensaver_style"}
Number auto_power_off "Auto Power Off (on Battery)" (G_airm) {channel="miio:basic:airm:auto_power_off"}
String actions "Actions" (G_airm) {channel="miio:basic:airm:actions"}

Qingping Air Monitor 2 (cgllc.airm.cgs2) item file lines ​

note: Autogenerated example. Replace the id (airm) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airm "Qingping Air Monitor 2" <status>
Number:Dimensionless relative_humidity "Relative Humidity" (G_airm) {channel="miio:basic:airm:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airm) {channel="miio:basic:airm:pm2_5_density"}
Number:Density pm10_density "PM10 Density" (G_airm) {channel="miio:basic:airm:pm10_density"}
Number:Temperature temperature "Temperature" (G_airm) {channel="miio:basic:airm:temperature"}
Number:Dimensionless co2_density "CO2 Density" (G_airm) {channel="miio:basic:airm:co2_density"}
Number tvoc_density "TVOC Density" (G_airm) {channel="miio:basic:airm:tvoc_density"}
Number:Dimensionless battery_level "Battery Level" (G_airm) {channel="miio:basic:airm:battery_level"}
Number charging_state "Charging State" (G_airm) {channel="miio:basic:airm:charging_state"}
Number noise_decibel "Noise Level" (G_airm) {channel="miio:basic:airm:noise_decibel"}
Number temperature_unit "Temperature Unit" (G_airm) {channel="miio:basic:airm:temperature_unit"}
Number tvoc_unit "TVOC Unit" (G_airm) {channel="miio:basic:airm:tvoc_unit"}
Switch time_mode "24-Hour Clock" (G_airm) {channel="miio:basic:airm:time_mode"}
Number standard "Air Quality Grading Standard" (G_airm) {channel="miio:basic:airm:standard"}
String sensor_states "Sensor States" (G_airm) {channel="miio:basic:airm:sensor_states"}

Mi Multifunction Air Monitor (cgllc.airmonitor.b1) item file lines ​

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airmonitor "Mi Multifunction Air Monitor" <status>
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Number:Density pm25 "PM2.5" (G_airmonitor) {channel="miio:basic:airmonitor:pm25"}
Number:Dimensionless co2 "CO2e" (G_airmonitor) {channel="miio:basic:airmonitor:co2"}
Number tvoc "tVOC" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc"}
Number:Dimensionless humidity "Humidity" (G_airmonitor) {channel="miio:basic:airmonitor:humidity"}
Number:Temperature temperature "Temperature" (G_airmonitor) {channel="miio:basic:airmonitor:temperature"}

Qingping Air Monitor (cgllc.airmonitor.s1) item file lines ​

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airmonitor "Qingping Air Monitor" <status>
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Number:Density pm25 "PM2.5" (G_airmonitor) {channel="miio:basic:airmonitor:pm25"}
Number:Dimensionless co2 "CO2" (G_airmonitor) {channel="miio:basic:airmonitor:co2"}
Number tvoc "tVOC" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc"}
Number:Dimensionless humidity "Humidity" (G_airmonitor) {channel="miio:basic:airmonitor:humidity"}
Number:Temperature temperature "Temperature" (G_airmonitor) {channel="miio:basic:airmonitor:temperature"}
Number aqi "Air Quality Index" (G_airmonitor) {channel="miio:basic:airmonitor:aqi"}
String tvoc_unit "tVOC Unit" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc_unit"}
String temperature_unit "Temperature Unit" (G_airmonitor) {channel="miio:basic:airmonitor:temperature_unit"}

Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) (chuangmi.plug.212a01) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Number:Time working_time "Working Time" (G_plug) {channel="miio:basic:plug:working_time"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}
Number:Energy power_consumption "Energy Consumption" (G_plug) {channel="miio:basic:plug:power_consumption"}
Number:ElectricCurrent electric_current "Current" (G_plug) {channel="miio:basic:plug:electric_current"}
Number:ElectricPotential voltage "Voltage" (G_plug) {channel="miio:basic:plug:voltage"}
Number:Power electric_power "Active Power" (G_plug) {channel="miio:basic:plug:electric_power"}
Number:Time on_duration "Loop On Duration" (G_plug) {channel="miio:basic:plug:on_duration"}
Number:Time off_duration "Loop Off Duration" (G_plug) {channel="miio:basic:plug:off_duration"}
Number:Time countdown "Countdown" (G_plug) {channel="miio:basic:plug:countdown"}
Switch loop_task "Loop Task" (G_plug) {channel="miio:basic:plug:loop_task"}
Switch countdown_active "Countdown Active" (G_plug) {channel="miio:basic:plug:countdown_active"}
Switch max_power_limit "Max Power Limit" (G_plug) {channel="miio:basic:plug:max_power_limit"}
Number:Power max_power "Max Power" (G_plug) {channel="miio:basic:plug:max_power"}
String bt_gw "BT Gateway" (G_plug) {channel="miio:basic:plug:bt-gw"}
String bt_gw_devices "Connected BT Gateway Devices" (G_plug) {channel="miio:basic:plug:bt-gw-devices"}

Mi Smart Plug WiFi (chuangmi.plug.hmi205) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Plug WiFi" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Plug (WiFi) (chuangmi.plug.hmi206) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Plug (WiFi)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Wi-Fi Plug (Bluetooth Gateway) (chuangmi.plug.hmi208) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Wi-Fi Plug (Bluetooth Gateway)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}

Mi Plug Mini (chuangmi.plug.m1) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Plug Mini" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Plug (Wi-Fi) Basic (chuangmi.plug.m3) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Plug (Wi-Fi) Basic" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}

Mi Smart Power Plug (chuangmi.plug.v1) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Power Plug" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}

Mi Smart Power Plug v2 (chuangmi.plug.v2) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Power Plug v2" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}

MIJIA Smart Plug Enhanced (chuangmi.plug.v3) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "MIJIA Smart  Plug Enhanced" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}
Number:Power electric_power "Active Power" (G_plug) {channel="miio:basic:plug:electric_power"}

Mijia Rice cooker (chunmi.cooker.eh1) item file lines ​

note: Autogenerated example. Replace the id (cooker) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_cooker "Mijia Rice cooker" <status>
Number status "Status" (G_cooker) {channel="miio:basic:cooker:status"}
Number error "Error" (G_cooker) {channel="miio:basic:cooker:error"}
Number:Temperature temperature "Temperature" (G_cooker) {channel="miio:basic:cooker:temperature"}
Number:Time remaining_time "Remaining Time" (G_cooker) {channel="miio:basic:cooker:remaining_time"}
Number:Time cook_time "Cooking Time" (G_cooker) {channel="miio:basic:cooker:cook_time"}
String control "Control" (G_cooker) {channel="miio:basic:cooker:control"}

Xiaomi Smart Blender (chunmi.juicer.twa1) item file lines ​

note: Autogenerated example. Replace the id (juicer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_juicer "Xiaomi Smart Blender" <status>
Number status "Status" (G_juicer) {channel="miio:basic:juicer:status"}
Number error "Error" (G_juicer) {channel="miio:basic:juicer:error"}
Number:Time remaining_time "Remaining Time" (G_juicer) {channel="miio:basic:juicer:remaining_time"}
Number:Time schedule_time "Scheduled Time" (G_juicer) {channel="miio:basic:juicer:schedule_time"}
Number:Time keep_warm_remaining_time "Keep Warm Remaining Time" (G_juicer) {channel="miio:basic:juicer:keep_warm_remaining_time"}
Number:Time cooking_time "Cooking Time" (G_juicer) {channel="miio:basic:juicer:cooking_time"}
Number:Temperature temperature "Temperature" (G_juicer) {channel="miio:basic:juicer:temperature"}
Number cup "Cup" (G_juicer) {channel="miio:basic:juicer:cup"}
Switch lid_open "Lid Open" (G_juicer) {channel="miio:basic:juicer:lid_open"}
String control "Control" (G_juicer) {channel="miio:basic:juicer:control"}

Xiaomi Smart Blender (chunmi.juicer.uka1) item file lines ​

note: Autogenerated example. Replace the id (juicer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_juicer "Xiaomi Smart Blender" <status>
Number status "Status" (G_juicer) {channel="miio:basic:juicer:status"}
Number error "Error" (G_juicer) {channel="miio:basic:juicer:error"}
Number:Time remaining_time "Remaining Time" (G_juicer) {channel="miio:basic:juicer:remaining_time"}
Number:Time schedule_time "Scheduled Time" (G_juicer) {channel="miio:basic:juicer:schedule_time"}
Number:Time keep_warm_remaining_time "Keep Warm Remaining Time" (G_juicer) {channel="miio:basic:juicer:keep_warm_remaining_time"}
Number:Time cooking_time "Cooking Time" (G_juicer) {channel="miio:basic:juicer:cooking_time"}
Number:Temperature temperature "Temperature" (G_juicer) {channel="miio:basic:juicer:temperature"}
Number cup "Cup" (G_juicer) {channel="miio:basic:juicer:cup"}
Switch lid_open "Lid Open" (G_juicer) {channel="miio:basic:juicer:lid_open"}
String control "Control" (G_juicer) {channel="miio:basic:juicer:control"}

Gosund Smart Plug (cuco.plug.cp1) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Gosund Smart Plug" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}
Switch physical_controls_locked "Child Lock" (G_plug) {channel="miio:basic:plug:physical_controls_locked"}
Number default_power_on_state "Power-On State" (G_plug) {channel="miio:basic:plug:default_power_on_state"}
Number:Power electric_power "Active Power" (G_plug) {channel="miio:basic:plug:electric_power"}
Number:ElectricPotential voltage "Voltage" (G_plug) {channel="miio:basic:plug:voltage"}
Number:ElectricCurrent electric_current "Current" (G_plug) {channel="miio:basic:plug:electric_current"}

Gosund Smart Plug CP1 (cuco.plug.cp1d) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Gosund Smart Plug CP1" <status>
String actions "Actions" (G_plug) {channel="miio:basic:plug:actions"}
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}

Xiaomi Smart Plug 2 (Wi-Fi) (cuco.plug.v2eur) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Xiaomi Smart Plug 2 (Wi-Fi)" <status>
String actions "Actions" (G_plug) {channel="miio:basic:plug:actions"}
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number default_power_on_state "Power-On State" (G_plug) {channel="miio:basic:plug:default_power_on_state"}
Number fault "Fault" (G_plug) {channel="miio:basic:plug:fault"}
Switch physical_controls_locked "Child Lock" (G_plug) {channel="miio:basic:plug:physical_controls_locked"}
Number:Energy power_consumption "Energy Consumption" (G_plug) {channel="miio:basic:plug:power_consumption"}
Number:Power electric_power "Active Power" (G_plug) {channel="miio:basic:plug:electric_power"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}
Switch delay "Double-Press Countdown" (G_plug) {channel="miio:basic:plug:delay"}
Number:Time delay_time "Countdown Time" (G_plug) {channel="miio:basic:plug:delay_time"}
Number:Time delay_remain_time "Countdown Remaining Time" (G_plug) {channel="miio:basic:plug:delay_remain_time"}
Switch charging_protection "Charging Protection" (G_plug) {channel="miio:basic:plug:charging_protection"}
Number:Power charging_protection_power "Charging Protection Threshold" (G_plug) {channel="miio:basic:plug:charging_protection_power"}
Number:Time charging_protection_time "Charging Protection Duration" (G_plug) {channel="miio:basic:plug:charging_protection_time"}
Switch loop_task "Loop Task" (G_plug) {channel="miio:basic:plug:loop_task"}
Switch max_power_limit "Max Power Limit" (G_plug) {channel="miio:basic:plug:max_power_limit"}
Number:Power max_power "Max Power" (G_plug) {channel="miio:basic:plug:max_power"}

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mi Smart Antibacterial Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number water_status "Water" (G_humidifier) {channel="miio:basic:humidifier:water_status"}
Number water_tank "Water Tank" (G_humidifier) {channel="miio:basic:humidifier:water_tank"}

Mi Smart Humidifier S (deerma.humidifier.jsq1) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mi Smart Humidifier S" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number water_status "Water" (G_humidifier) {channel="miio:basic:humidifier:water_status"}
Number water_tank "Water Tank" (G_humidifier) {channel="miio:basic:humidifier:water_tank"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}

Mijia Smart Anti-bacterial Humidifier 2 (deerma.humidifier.jsq2g) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mijia Smart Anti-bacterial Humidifier 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch water_tank_removed "Water Tank Removed" (G_humidifier) {channel="miio:basic:humidifier:water_tank_removed"}
Switch water_shortage "Insufficient Water" (G_humidifier) {channel="miio:basic:humidifier:water_shortage"}
Switch humidity_sensor_fault "Humidity Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:humidity_sensor_fault"}
Switch temperature_sensor_fault "Temperature Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:temperature_sensor_fault"}
Switch overwet_protection_active "Over-Humidity Protection Active" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection_active"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Switch constant_protection_active "Auto Turn-Off Active" (G_humidifier) {channel="miio:basic:humidifier:constant_protection_active"}
Switch constant_protection "Auto Turn-Off" (G_humidifier) {channel="miio:basic:humidifier:constant_protection"}

Xiaomi Smart Humidifier 2 (deerma.humidifier.jsq2w) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Xiaomi Smart Humidifier 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number status "Status" (G_humidifier) {channel="miio:basic:humidifier:status"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch water_tank_removed "Water Tank Removed" (G_humidifier) {channel="miio:basic:humidifier:water_tank_removed"}
Switch water_shortage "Insufficient Water" (G_humidifier) {channel="miio:basic:humidifier:water_shortage"}
Switch humidity_sensor_fault "Humidity Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:humidity_sensor_fault"}
Switch temperature_sensor_fault "Temperature Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:temperature_sensor_fault"}
Switch overwet_protection_active "Over-Humidity Protection Active" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection_active"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Switch high_humidity "High Humidity" (G_humidifier) {channel="miio:basic:humidifier:high_humidity"}

Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq5) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mi Smart Antibacterial Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch water_shortage "Insufficient Water" (G_humidifier) {channel="miio:basic:humidifier:water_shortage"}
Switch water_tank_removed "Water Tank Removed" (G_humidifier) {channel="miio:basic:humidifier:water_tank_removed"}

Mi Smart Humidifer S (deerma.humidifier.jsqs) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mi Smart Humidifer S" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch water_shortage "Insufficient Water" (G_humidifier) {channel="miio:basic:humidifier:water_shortage"}
Switch water_tank_removed "Water Tank Removed" (G_humidifier) {channel="miio:basic:humidifier:water_tank_removed"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Number humidity_sensor_source "Humidity Sensor Source" (G_humidifier) {channel="miio:basic:humidifier:humidity_sensor_source"}
Number:Dimensionless filter_life_level "Filter Life" (G_humidifier) {channel="miio:basic:humidifier:filter_life_level"}
Number:Time filter_left_time "Filter Time Left" (G_humidifier) {channel="miio:basic:humidifier:filter_left_time"}
Number:Time filter_used_time "Filter Used Time" (G_humidifier) {channel="miio:basic:humidifier:filter_used_time"}

Mi Smart Humidifier (deerma.humidifier.mjjsq) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mi Smart Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number water_status "Water" (G_humidifier) {channel="miio:basic:humidifier:water_status"}
Number water_tank "Water Tank" (G_humidifier) {channel="miio:basic:humidifier:water_tank"}

Mi Fresh Air Ventilator A1-150 (dmaker.airfresh.a1) item file lines ​

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airfresh "Mi Fresh Air Ventilator A1-150" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
Switch ptc_status "PTC Status" (G_airfresh) {channel="miio:basic:airfresh:ptc_status"}
Switch display "Display" (G_airfresh) {channel="miio:basic:airfresh:display"}
Switch child_lock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:child_lock"}
Switch alarm "Notification Sound" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Number:Density pm25 "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:pm25"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Number control_speed "Current Speed" (G_airfresh) {channel="miio:basic:airfresh:control_speed"}
Number favourite_speed "Favorite Speed" (G_airfresh) {channel="miio:basic:airfresh:favourite_speed"}
Number:Temperature temperature_outside "Temperature Outside" (G_airfresh) {channel="miio:basic:airfresh:temperature_outside"}
Number:Dimensionless filter_percents "Filter Remaining" (G_airfresh) {channel="miio:basic:airfresh:filter_percents"}
Number:Time filter_days "Filter Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:filter_days"}
String reset_filter "Reset Filter" (G_airfresh) {channel="miio:basic:airfresh:reset_filter"}

Mi Fresh Air Ventilator (dmaker.airfresh.t2017) item file lines ​

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airfresh "Mi Fresh Air Ventilator" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
String ptc_level "PTC Level" (G_airfresh) {channel="miio:basic:airfresh:ptc_level"}
Switch ptc_status "PTC Status" (G_airfresh) {channel="miio:basic:airfresh:ptc_status"}
String screen_direction "Screen Direction" (G_airfresh) {channel="miio:basic:airfresh:screen_direction"}
Switch display "Display" (G_airfresh) {channel="miio:basic:airfresh:display"}
Switch child_lock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:child_lock"}
Switch alarm "Notification Sound" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Number:Density pm25 "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:pm25"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Number control_speed "Current Speed" (G_airfresh) {channel="miio:basic:airfresh:control_speed"}
Number favourite_speed "Favorite Speed" (G_airfresh) {channel="miio:basic:airfresh:favourite_speed"}
Number:Temperature temperature_outside "Temperature Outside" (G_airfresh) {channel="miio:basic:airfresh:temperature_outside"}
Number:Dimensionless filter_percents "Filter Remaining" (G_airfresh) {channel="miio:basic:airfresh:filter_percents"}
Number:Time filter_days "Filter Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:filter_days"}
Number:Dimensionless filter_pro_percents "Filter Pro Remaining" (G_airfresh) {channel="miio:basic:airfresh:filter_pro_percents"}
Number:Time filter_pro_days "Filter Pro Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:filter_pro_days"}
String reset_filter "Reset Filter" (G_airfresh) {channel="miio:basic:airfresh:reset_filter"}

Mi Smart Standing Fan 2 Lite (dmaker.fan.1c) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan 2 Lite" <status>
Switch On "Power" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Oscillation" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number:Time OffDelayTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Indicator Light" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Child Lock" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Standing Fan 1X (dmaker.fan.p5) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan 1X" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed "Fan Speed" (G_fan) {channel="miio:basic:fan:speed"}
String mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch roll "Oscillation" (G_fan) {channel="miio:basic:fan:roll"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time timer "Power-Off Timer" (G_fan) {channel="miio:basic:fan:timer"}
Switch beep "Notification Sound" (G_fan) {channel="miio:basic:fan:beep"}
Switch light "Indicator Light" (G_fan) {channel="miio:basic:fan:light"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}

Mi Smart Standing Fan 1C (dmaker.fan.p8) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan 1C" <status>
Switch On "Power" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Oscillation" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number:Time OffDelayTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Indicator Light" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Child Lock" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Tower Fan (dmaker.fan.p9) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Tower Fan" <status>
Switch On "Power" (G_fan) {channel="miio:basic:fan:On"}
Dimmer SpeedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:SpeedLevel"}
Number FanLevel "Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Oscillation" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number:Angle HorizontalAngle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:HorizontalAngle"}
String MotorControl "Move Direction" (G_fan) {channel="miio:basic:fan:MotorControl"}
Number:Time OffDelayTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Indicator Light" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Child Lock" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mi Smart Standing Fan 2 (dmaker.fan.p10) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan 2" <status>
Switch on "Power" (G_fan) {channel="miio:basic:fan:on"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String motor_control "Move Direction" (G_fan) {channel="miio:basic:fan:motor_control"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:alarm"}
Switch brightness "Indicator Light" (G_fan) {channel="miio:basic:fan:brightness"}
Switch physical_controls_locked "Child Lock" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}

Mi Smart Standing Fan Pro (dmaker.fan.p11) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan Pro" <status>
Switch on "Power" (G_fan) {channel="miio:basic:fan:on"}
Dimmer status "Fan Speed" (G_fan) {channel="miio:basic:fan:status"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:alarm"}
Switch on1 "Indicator Light" (G_fan) {channel="miio:basic:fan:on1"}
Switch physical_controls_locked "Child Lock" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Mi Smart Standing Fan Pro (dmaker.fan.p15) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan Pro" <status>
Switch on "Power" (G_fan) {channel="miio:basic:fan:on"}
Dimmer status "Fan Speed" (G_fan) {channel="miio:basic:fan:status"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:alarm"}
Switch on1 "Indicator Light" (G_fan) {channel="miio:basic:fan:on1"}
Switch physical_controls_locked "Child Lock" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Mi Smart Standing Fan 2 (dmaker.fan.p18) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan 2" <status>
Switch on "Power" (G_fan) {channel="miio:basic:fan:on"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String motor_control "Move Direction" (G_fan) {channel="miio:basic:fan:motor_control"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:alarm"}
Switch brightness "Indicator Light" (G_fan) {channel="miio:basic:fan:brightness"}
Switch physical_controls_locked "Child Lock" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}

Mijia Smart Standing Air Circulation Fan (dmaker.fan.p28) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mijia Smart Standing Air Circulation Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch vertical_swing "Vertical Oscillation" (G_fan) {channel="miio:basic:fan:vertical_swing"}
Number:Angle vertical_angle "Vertical Oscillation Angle" (G_fan) {channel="miio:basic:fan:vertical_angle"}
String move_vertical "Move Direction Vertical" (G_fan) {channel="miio:basic:fan:move_vertical"}
Switch swing_all "Loop Oscillation" (G_fan) {channel="miio:basic:fan:swing_all"}
Switch back_to_center "Back to Center" (G_fan) {channel="miio:basic:fan:back_to_center"}
Switch off_to_center "Back to Center at Power-Off" (G_fan) {channel="miio:basic:fan:off_to_center"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number:Temperature temperature "Temperature" (G_fan) {channel="miio:basic:fan:temperature"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}

Xiaomi Smart Standing Fan 2 Pro (dmaker.fan.p33) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Xiaomi Smart Standing Fan 2 Pro" <status>
Switch on "Power" (G_fan) {channel="miio:basic:fan:on"}
Dimmer status "Fan Speed" (G_fan) {channel="miio:basic:fan:status"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:alarm"}
Switch on1 "Indicator Light" (G_fan) {channel="miio:basic:fan:on1"}
Switch physical_controls_locked "Child Lock" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Xiaomi Smart Tower Fan (dmaker.fan.p39) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Xiaomi Smart Tower Fan" <status>
Switch On "Power" (G_fan) {channel="miio:basic:fan:On"}
Dimmer SpeedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:SpeedLevel"}
Number FanLevel "Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Oscillation" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number:Angle HorizontalAngle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:HorizontalAngle"}
String MotorControl "Move Direction" (G_fan) {channel="miio:basic:fan:MotorControl"}
Number:Time OffDelayTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Indicator Light" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Child Lock" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

Mijia Smart Tower Fan 2 (dmaker.fan.p45) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mijia Smart Tower Fan 2" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}

Mi Robot Vacuum-Mop (dreame.vacuum.ma1808) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number:Dimensionless BatteryLevel "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:BatteryLevel"}
Number ChargingState "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:ChargingState"}
Number water_mode "Clean - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water-mode"}
Number Fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:Fault"}
Number Status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:Status"}
Number:Time BrushLeftTime "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime"}
Number:Dimensionless BrushLifeLevel "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel"}
Number:Dimensionless FilterLifeLevel "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:FilterLifeLevel"}
Number:Time FilterLeftTime "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:FilterLeftTime"}
Number:Time BrushLeftTime1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime1"}
Number:Dimensionless BrushLifeLevel1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel1"}
Number WorkMode "Clean - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:WorkMode"}
String Area "Clean - Area" (G_vacuum) {channel="miio:basic:vacuum:Area"}
String Timer "Clean - Timer" (G_vacuum) {channel="miio:basic:vacuum:Timer"}
Number Mode "Clean - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:Mode"}
Number:Time TotalCleanTime "Clean - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTime"}
Number TotalCleanTimes "Clean - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTimes"}
Number:Area TotalCleanArea "Clean - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanArea"}
Number CleanLogStartTime "Clean - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:CleanLogStartTime"}
Number ButtonLed "Clean - Button Led" (G_vacuum) {channel="miio:basic:vacuum:ButtonLed"}
Number TaskDone "Clean - Task Status" (G_vacuum) {channel="miio:basic:vacuum:TaskDone"}
Switch SaveMapStatus "Clean - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:SaveMapStatus"}
String LifeSieve "Consumable - Life Sieve" (G_vacuum) {channel="miio:basic:vacuum:LifeSieve"}
String LifeBrushSide "Consumable - Life Brush Side" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushSide"}
String LifeBrushMain "Consumable - Life Brush Main" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushMain"}
Switch Enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:Enable"}
String StartTime "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:StartTime"}
String StopTime "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:StopTime"}
Number:Dimensionless Volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:Volume"}
String VoicePackets "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:VoicePackets"}
String TimeZone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:TimeZone"}

Mi Robot Vacuum-Mop (dreame.vacuum.mb1808) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number:Dimensionless BatteryLevel "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:BatteryLevel"}
Number ChargingState "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:ChargingState"}
Number water_mode "Clean - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water-mode"}
Number Fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:Fault"}
Number Status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:Status"}
Number:Time BrushLeftTime "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime"}
Number:Dimensionless BrushLifeLevel "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel"}
Number:Dimensionless FilterLifeLevel "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:FilterLifeLevel"}
Number:Time FilterLeftTime "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:FilterLeftTime"}
Number:Time BrushLeftTime1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime1"}
Number:Dimensionless BrushLifeLevel1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel1"}
Number WorkMode "Clean - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:WorkMode"}
String Area "Clean - Area" (G_vacuum) {channel="miio:basic:vacuum:Area"}
String Timer "Clean - Timer" (G_vacuum) {channel="miio:basic:vacuum:Timer"}
Number Mode "Clean - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:Mode"}
Number:Time TotalCleanTime "Clean - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTime"}
Number TotalCleanTimes "Clean - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTimes"}
Number:Area TotalCleanArea "Clean - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanArea"}
Number CleanLogStartTime "Clean - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:CleanLogStartTime"}
Number ButtonLed "Clean - Button Led" (G_vacuum) {channel="miio:basic:vacuum:ButtonLed"}
Number TaskDone "Clean - Task Status" (G_vacuum) {channel="miio:basic:vacuum:TaskDone"}
Switch SaveMapStatus "Clean - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:SaveMapStatus"}
String LifeSieve "Consumable - Life Sieve" (G_vacuum) {channel="miio:basic:vacuum:LifeSieve"}
String LifeBrushSide "Consumable - Life Brush Side" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushSide"}
String LifeBrushMain "Consumable - Life Brush Main" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushMain"}
Switch Enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:Enable"}
String StartTime "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:StartTime"}
String StopTime "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:StopTime"}
Number:Dimensionless Volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:Volume"}
String VoicePackets "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:VoicePackets"}
String TimeZone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:TimeZone"}

Mi Robot Vacuum Mop 1C STYTJ01ZHM (dreame.vacuum.mc1808) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum Mop 1C STYTJ01ZHM" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number:Dimensionless BatteryLevel "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:BatteryLevel"}
Number ChargingState "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:ChargingState"}
Number water_mode "Clean - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water-mode"}
Number Fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:Fault"}
Number Status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:Status"}
Number:Time BrushLeftTime "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime"}
Number:Dimensionless BrushLifeLevel "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel"}
Number:Dimensionless FilterLifeLevel "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:FilterLifeLevel"}
Number:Time FilterLeftTime "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:FilterLeftTime"}
Number:Time BrushLeftTime1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime1"}
Number:Dimensionless BrushLifeLevel1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel1"}
Number WorkMode "Clean - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:WorkMode"}
String Area "Clean - Area" (G_vacuum) {channel="miio:basic:vacuum:Area"}
String Timer "Clean - Timer" (G_vacuum) {channel="miio:basic:vacuum:Timer"}
Number Mode "Clean - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:Mode"}
Number:Time TotalCleanTime "Clean - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTime"}
Number TotalCleanTimes "Clean - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTimes"}
Number:Area TotalCleanArea "Clean - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanArea"}
Number CleanLogStartTime "Clean - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:CleanLogStartTime"}
Number ButtonLed "Clean - Button Led" (G_vacuum) {channel="miio:basic:vacuum:ButtonLed"}
Number TaskDone "Clean - Task Status" (G_vacuum) {channel="miio:basic:vacuum:TaskDone"}
Switch SaveMapStatus "Clean - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:SaveMapStatus"}
String LifeSieve "Consumable - Life Sieve" (G_vacuum) {channel="miio:basic:vacuum:LifeSieve"}
String LifeBrushSide "Consumable - Life Brush Side" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushSide"}
String LifeBrushMain "Consumable - Life Brush Main" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushMain"}
Switch Enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:Enable"}
String StartTime "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:StartTime"}
String StopTime "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:StopTime"}
Number:Dimensionless Volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:Volume"}
String VoicePackets "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:VoicePackets"}
String TimeZone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:TimeZone"}

Xiaomi Robot Vacuum-Mop 2C (dreame.vacuum.md1808) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum-Mop 2C" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number:Dimensionless BatteryLevel "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:BatteryLevel"}
Number ChargingState "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:ChargingState"}
Number water_mode "Clean - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water-mode"}
Number Fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:Fault"}
Number Status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:Status"}
Number:Time BrushLeftTime "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime"}
Number:Dimensionless BrushLifeLevel "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel"}
Number:Dimensionless FilterLifeLevel "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:FilterLifeLevel"}
Number:Time FilterLeftTime "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:FilterLeftTime"}
Number:Time BrushLeftTime1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime1"}
Number:Dimensionless BrushLifeLevel1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel1"}
Number WorkMode "Clean - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:WorkMode"}
String Area "Clean - Area" (G_vacuum) {channel="miio:basic:vacuum:Area"}
String Timer "Clean - Timer" (G_vacuum) {channel="miio:basic:vacuum:Timer"}
Number Mode "Clean - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:Mode"}
Number:Time TotalCleanTime "Clean - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTime"}
Number TotalCleanTimes "Clean - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTimes"}
Number:Area TotalCleanArea "Clean - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanArea"}
Number CleanLogStartTime "Clean - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:CleanLogStartTime"}
Number ButtonLed "Clean - Button Led" (G_vacuum) {channel="miio:basic:vacuum:ButtonLed"}
Number TaskDone "Clean - Task Status" (G_vacuum) {channel="miio:basic:vacuum:TaskDone"}
Switch SaveMapStatus "Clean - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:SaveMapStatus"}
String LifeSieve "Consumable - Life Sieve" (G_vacuum) {channel="miio:basic:vacuum:LifeSieve"}
String LifeBrushSide "Consumable - Life Brush Side" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushSide"}
String LifeBrushMain "Consumable - Life Brush Main" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushMain"}
Switch Enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:Enable"}
String StartTime "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:StartTime"}
String StopTime "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:StopTime"}
Number:Dimensionless Volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:Volume"}
String VoicePackets "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:VoicePackets"}
String TimeZone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:TimeZone"}

Dreame Robot Vacuum-Mop F9 (dreame.vacuum.p2008) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame Robot Vacuum-Mop F9" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save-map-status"}

Dreame Robot Vacuum D9 (dreame.vacuum.p2009) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame Robot Vacuum D9 " <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Reset Consumable" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Mop Pad Cleaning Reminder" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation-matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation-status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser-switch"}
Number clean_setting "Vacuum Extend - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:clean-setting"}
Number sensitivity "Vacuum Extend - Carpet Boost Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mopping Pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-way"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult-map-state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor-life-level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor-left-time"}

Dreame Bot W10 (dreame.vacuum.p2027) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame Bot W10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Dreame Bot Z10 Pro (dreame.vacuum.p2028) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame Bot Z10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number clean_setting "Vacuum Extend - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number sensitivity "Vacuum Extend - Carpet Boost Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mopping Pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}

DreameBot L10 Plus (dreame.vacuum.p2028a) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot L10 Plus" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number clean_setting "Vacuum Extend - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number sensitivity "Vacuum Extend - Carpet Boost Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mopping Pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}

Dreame Bot L10 Pro (dreame.vacuum.p2029) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame Bot L10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number clean_setting "Vacuum Extend - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number sensitivity "Vacuum Extend - Carpet Boost Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mopping Pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}

Trouver Robot LDS Vacuum-Mop Finder (dreame.vacuum.p2036) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Trouver Robot LDS Vacuum-Mop Finder" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Reset Consumable" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Mop Pad Cleaning Reminder" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation-matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation-status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser-switch"}
Number clean_setting "Vacuum Extend - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:clean-setting"}
Number sensitivity "Vacuum Extend - Carpet Boost Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mopping Pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-way"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult-map-state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor-life-level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor-left-time"}

Mi Robot Vacuum-Mop 1T (dreame.vacuum.p2041) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 1T" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Mi Robot Vacuum-Mop 2 Pro+ (dreame.vacuum.p2041o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2 Pro+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Xiaomi Robot Vacuum X10+ (dreame.vacuum.p2114a) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum X10+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}

Mijia Omni Robot Vacuum-Mop (dreame.vacuum.p2114o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Omni Robot Vacuum-Mop" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}

Mijia Robot Vacuum-Mop 2C (dreame.vacuum.p2140) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum-Mop 2C" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Mi Robot Vacuum-Mop 2C (dreame.vacuum.p2140a) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2C" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Mi Robot Vacuum-Mop 2 (dreame.vacuum.p2140o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Mi Robot Vacuum-Mop 2 (dreame.vacuum.p2140p) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Mi Robot Vacuum-Mop 2 (dreame.vacuum.p2140q) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

Mijia Robot Vacuum-Mop Ultra Slim (dreame.vacuum.p2148o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum-Mop Ultra Slim" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Dust Bin Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Dust Bin Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless diad_filter_life_level "Water Tank Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:diad_filter_life_level"}
Number:Time diad_filter_left_time "Water Tank Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:diad_filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Mijia Self-Cleaning Robot Vacuum-Mop Pro (dreame.vacuum.p2149o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Self-Cleaning Robot Vacuum-Mop Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Switch electrolytic_water "Vacuum Extend - Electrolyzed Water" (G_vacuum) {channel="miio:basic:vacuum:electrolytic_water"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}

Mi Robot Vacuum-Mop 2 Ultra (dreame.vacuum.p2150a) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2 Ultra" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}

Mi Robot Vacuum-Mop 2 Ultra Set (dreame.vacuum.p2150b) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2 Ultra Set" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}

Mijia Robot Vacuum-Mop Dirt Disposal (dreame.vacuum.p2150o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum-Mop Dirt Disposal" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}

MOVA Z500 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2156o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "MOVA Z500 Robot Vacuum and Mop Cleaner" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch save_map_status "Vslam Extend - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

MOVA L600 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2157) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "MOVA L600 Robot Vacuum and Mop Cleaner" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Mop Pad Cleaning Reminder" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

DreameBot D9 Pro (dreame.vacuum.p2187) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot D9 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Mop Pad Cleaning Reminder" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Dreame Bot D9 Max (dreame.vacuum.p2259) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame Bot D9 Max" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Mop Pad Cleaning Reminder" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

DreameBot W10 Pro Self-Cleaning Robot Vacuum and Mop (dreame.vacuum.r2104) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot W10 Pro Self-Cleaning Robot Vacuum and Mop" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}

DreameBot D10 Plus (dreame.vacuum.r2205) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot D10 Plus" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number clean_setting "Vacuum Extend - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number sensitivity "Vacuum Extend - Carpet Boost Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mopping Pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}

Xiaomi Robot Vacuum X10 (dreame.vacuum.r2209) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum X10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Water Tank Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}

Mijia Self-Cleaning Robot Vacuum-Mop 2 Pro (dreame.vacuum.r2210) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Self-Cleaning Robot Vacuum-Mop 2 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Using Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Number auto_water "Vacuum Extend - Auto Water Refilling And Drainage" (G_vacuum) {channel="miio:basic:vacuum:auto_water"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

Xiaomi Robot Vacuum S10+ (dreame.vacuum.r2211o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S10+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Water Tank and Mop Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}

DreameBot X10 Pro (dreame.vacuum.r2215) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot X10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot L10s Pro (dreame.vacuum.r2216o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot L10s Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Water Tank and Mop Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}

DreameBot S10 (dreame.vacuum.r2228) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot S10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot L10s Ultra (dreame.vacuum.r2228o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot L10s Ultra" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot L10s Ultra (dreame.vacuum.r2228z) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot L10s Ultra" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot W10s Pro (dreame.vacuum.r2232a) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot W10s Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}

DreameBot L10s Prime (dreame.vacuum.r2232c) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot L10s Prime" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}

DreameBot S10 Pro (dreame.vacuum.r2233) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot S10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot X10 (dreame.vacuum.r2235) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot X10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot S10 Plus (dreame.vacuum.r2246) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot S10 Plus" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot S10 Pro Plus (dreame.vacuum.r2247) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot S10 Pro Plus" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

DreameBot W10s (dreame.vacuum.r2251o) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "DreameBot W10s" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}

Mijia Infinite Robot Vacuum-Mop 1S (dreame.vacuum.r2254) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Infinite Robot Vacuum-Mop 1S" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Using Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
Switch voice_assistant "Audio - Voice Assistant" (G_vacuum) {channel="miio:basic:vacuum:voice_assistant"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

Dreame L10s Pro Ultra Heat (dreame.vacuum.r2338) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame L10s Pro Ultra Heat" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

Dreame L10s Pro Ultra Heat (dreame.vacuum.r2338a) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame L10s Pro Ultra Heat" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

Dreame L10s Pro Ultra Heat (dreame.vacuum.r2338h) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Dreame L10s Pro Ultra Heat" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch laser_switch "Vacuum Extend - 3D Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:laser_switch"}
Number ai_switch "Vacuum Extend - AI Settings" (G_vacuum) {channel="miio:basic:vacuum:ai_switch"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch custom_enable "Vacuum Extend - Customized Room Cleaning" (G_vacuum) {channel="miio:basic:vacuum:custom_enable"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number sensitivity "Vacuum Extend - Sensitivity" (G_vacuum) {channel="miio:basic:vacuum:sensitivity"}
Number mop_way "Vacuum Extend - Mop Way" (G_vacuum) {channel="miio:basic:vacuum:mop_way"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_distinguish "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_distinguish"}
Switch autowash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:autowash_switch"}
Number warn_status "Vacuum Extend - Warn Status" (G_vacuum) {channel="miio:basic:vacuum:warn_status"}
Number carpet_clean "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_clean"}
Number auto_add_detergent "Vacuum Extend - Auto Add Detergent" (G_vacuum) {channel="miio:basic:vacuum:auto_add_detergent"}
Number:Time dry_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:dry_time"}
Number nowater_tips "Vacuum Extend - No Water Warning" (G_vacuum) {channel="miio:basic:vacuum:nowater_tips"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Switch mult_map_state "Map - Multi-floor Maps" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Switch auto_collect "Collect Dust - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}
Number dust_status "Collect Dust - Dust Status" (G_vacuum) {channel="miio:basic:vacuum:dust_status"}
Number:Dimensionless sensor_life_level "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:sensor_life_level"}
Number:Time sensor_left_time "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:sensor_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Time silverion_life_time "Silver Ion - Silver Ion Left Time" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_time"}
Number:Dimensionless silverion_life_level "Silver Ion - Silver Ion Life Level" (G_vacuum) {channel="miio:basic:vacuum:silverion_life_level"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}

HUIZUO ARIES For Bedroom (huayi.light.ari013) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO ARIES For Bedroom" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO ARIES For Living Room (huayi.light.aries) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO ARIES For Living Room" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO Fan Light (huayi.light.fanwy) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO Fan Light" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number fan_level "Fan - Speed" (G_light) {channel="miio:basic:light:fan_level"}
Switch fan_reverse "Fan - Reverse" (G_light) {channel="miio:basic:light:fan_reverse"}
Number mode "Fan - Mode" (G_light) {channel="miio:basic:light:mode"}

HUIZUO Fan Light(2020) (huayi.light.fanwy2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO Fan Light(2020)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number fan_level "Fan - Speed" (G_light) {channel="miio:basic:light:fan_level"}
Number mode "Fan - Mode" (G_light) {channel="miio:basic:light:mode"}
Number:Temperature preset_color_temperature "Preset - Color Temperature" (G_light) {channel="miio:basic:light:preset_color_temperature"}
Number:Dimensionless preset_brightness "Preset - Brightness" (G_light) {channel="miio:basic:light:preset_brightness"}
Number preset_fan_level "Preset - Fan Speed" (G_light) {channel="miio:basic:light:preset_fan_level"}
Number fan_direction "Fan - Direction" (G_light) {channel="miio:basic:light:fan_direction"}
Switch preset "Preset" (G_light) {channel="miio:basic:light:preset"}
Switch swing "Fan - Swing" (G_light) {channel="miio:basic:light:swing"}

HUIZUO PEGASUS For Living Room (huayi.light.peg091) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO PEGASUS For Living Room" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO PEGASUS For Bedroom (huayi.light.peg093) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO PEGASUS For Bedroom" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO PISCES For Bedroom (huayi.light.pis123) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO PISCES For Bedroom" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO PISCES For Living Room (huayi.light.pisces) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO PISCES For Living Room" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO TAURUS For Bedroom (huayi.light.tau023) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO TAURUS For Bedroom" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO TAURUS For Living Room (huayi.light.taurus) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO TAURUS For Living Room" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO VIRGO For Bedroom (huayi.light.vir063) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO VIRGO For Bedroom" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO VIRGO For Living Room (huayi.light.virgo) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO VIRGO For Living Room" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO Ceiling Light (huayi.light.wy) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO Ceiling Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUAYI LIGHTING COMMON CEILING LIGHT (huayi.light.wy002) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUAYI LIGHTING COMMON CEILING LIGHT" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO LIANGCHEN(BLE Mesh) (huayi.light.wy200) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO LIANGCHEN(BLE Mesh)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO SAG Downlight (BLE Mesh) (huayi.light.wy201) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO SAG Downlight (BLE Mesh)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO Bulb (BLE Mesh) (huayi.light.wy202) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO Bulb (BLE Mesh)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO YONG Downlight (BLE Mesh) (huayi.light.wy203) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO YONG Downlight (BLE Mesh)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

huayi.light.wy204 (huayi.light.wy204) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "huayi.light.wy204" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

HUIZUO Heating Lamp (huayi.light.wyheat) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO Heating Lamp" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}
Switch on1 "Heater - Power" (G_light) {channel="miio:basic:light:on1"}
Number heat_level "Heater - Level" (G_light) {channel="miio:basic:light:heat_level"}
Switch screen_light "Device Screen Light" (G_light) {channel="miio:basic:light:screen_light"}

HUIZUO ZIWEI Ceiling Lamp (huayi.light.zw131) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "HUIZUO ZIWEI Ceiling Lamp" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

Mi Robot Vacuum-Mop Pro (ijai.vacuum.v1) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop Pro" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Stain Identification" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognition" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Mi Robot Vacuum-Mop 2 (ijai.vacuum.v2) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Mi Robot Vacuum-Mop 2 Pro (ijai.vacuum.v3) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2 Pro" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Mi Robot Vacuum-Mop 2 Lite (ijai.vacuum.v10) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop 2 Lite" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Mijia Robot Vacuum-Mop 2Pro (ijai.vacuum.v13) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum-Mop 2Pro" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Stain Identification" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognition" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Switch electrolysis "Sweep - Water Electrolysis" (G_vacuum) {channel="miio:basic:vacuum:electrolysis"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Mijia Self-Cleaning Robot Vacuum-Mop (ijai.vacuum.v14) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Self-Cleaning Robot Vacuum-Mop" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Stain Identification" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognition" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch carpet_show "Sweep - Carpet Display" (G_vacuum) {channel="miio:basic:vacuum:carpet_show"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Switch electrolysis "Sweep - Water Electrolysis" (G_vacuum) {channel="miio:basic:vacuum:electrolysis"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
Switch pause_drying_dnd "Sweep - Pause Drying During Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:pause_drying_dnd"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Xiaomi Robot Vacuum S10 (ijai.vacuum.v17) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S10" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Stain Identification" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognition" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Switch has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Mijia Robot Vacuum-Mop 3C (ijai.vacuum.v18) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum-Mop 3C" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Stain Identification" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognition" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Switch has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

Xiaomi Robot Vacuum-Mop 2S (ijai.vacuum.v19) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum-Mop 2S" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Stain Identification" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Recognition" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
String all_enable_count "Schedule - Schedule Count" (G_vacuum) {channel="miio:basic:vacuum:all_enable_count"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target_point"}
Switch remember_state "Map - Remember Map" (G_vacuum) {channel="miio:basic:vacuum:remember_state"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Number map_num "Map - Number of Maps" (G_vacuum) {channel="miio:basic:vacuum:map_num"}
String cur_cleaning_path "Map - Current Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur_cleaning_path"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Switch has_new_map "Map - New Map To Save" (G_vacuum) {channel="miio:basic:vacuum:has_new_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

IKEA E27 white spectrum opal (ikea.light.led1545g12) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA E27 white spectrum opal" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E27 white spectrum clear (ikea.light.led1546g12) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA E27 white spectrum clear" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E14 white spectrum (ikea.light.led1536g5) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA E14 white spectrum" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA GU10 white spectrum (ikea.light.led1537r6) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA GU10 white spectrum" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E27 warm white (ikea.light.led1623g12) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA E27 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA GU10 warm white (ikea.light.led1650r5) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA GU10 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

IKEA E14 warm white (ikea.light.led1649c5) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "IKEA E14 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

leshow fan (leshow.fan.ss4) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "leshow fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Number swing_mode "Oscillation" (G_fan) {channel="miio:basic:fan:swing_mode"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Light" (G_fan) {channel="miio:basic:fan:led"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Xiaomiyoupin Curtain Controller (Wi-Fi) (lumi.curtain.hagl05) item file lines ​

note: Autogenerated example. Replace the id (curtain) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_curtain "Xiaomiyoupin Curtain Controller (Wi-Fi)" <status>
Number fault "Curtain - Device Fault" (G_curtain) {channel="miio:basic:curtain:fault"}
Number motor_control "Curtain - Motor Control" (G_curtain) {channel="miio:basic:curtain:motor_control"}
Number:Dimensionless current_position "Curtain - Current Position" (G_curtain) {channel="miio:basic:curtain:current-position"}
Number status "Curtain - Status" (G_curtain) {channel="miio:basic:curtain:status"}
Number:Dimensionless target_position "Curtain - Target Position" (G_curtain) {channel="miio:basic:curtain:target-position"}
Number manual_enabled "curtain_cfg - Manual Enabled" (G_curtain) {channel="miio:basic:curtain:manual-enabled"}
Number polarity "Curtain_cfg - Polarity" (G_curtain) {channel="miio:basic:curtain:polarity"}
Number pos_limit "curtain_cfg - Position Limit" (G_curtain) {channel="miio:basic:curtain:pos-limit"}
Number en_night_tip_light "Curtain_cfg - En_night_tip_light" (G_curtain) {channel="miio:basic:curtain:en_night_tip_light"}
Number run_time "Curtain_cfg - Run-time" (G_curtain) {channel="miio:basic:curtain:run-time"}
Number adjust_value "Motor_controller - Adjust_value" (G_curtain) {channel="miio:basic:curtain:adjust_value"}

Aqara Curtain Controller A1 (lumi.curtain.hagl08) item file lines ​

note: Autogenerated example. Replace the id (curtain) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_curtain "Aqara Curtain Controller A1" <status>
Number fault "Curtain - Device Fault" (G_curtain) {channel="miio:basic:curtain:fault"}
Number motor_control "Curtain - Motor Control" (G_curtain) {channel="miio:basic:curtain:motor_control"}
Number:Dimensionless current_position "Curtain - Current Position" (G_curtain) {channel="miio:basic:curtain:current_position"}
Number status "Curtain - Status" (G_curtain) {channel="miio:basic:curtain:status"}
Number:Dimensionless target_position "Curtain - Target Position" (G_curtain) {channel="miio:basic:curtain:target_position"}
Number manual_enabled "Curtain Config - Manual Pull To Start" (G_curtain) {channel="miio:basic:curtain:manual_enabled"}
Number polarity "Curtain Config - Motor Direction" (G_curtain) {channel="miio:basic:curtain:polarity"}
Number pos_limit "Curtain Config - Position Limit" (G_curtain) {channel="miio:basic:curtain:pos_limit"}
Number en_night_tip_light "Curtain Config - Night Indicator Light" (G_curtain) {channel="miio:basic:curtain:en_night_tip_light"}
Number run_time "Curtain Config - Run Time" (G_curtain) {channel="miio:basic:curtain:run_time"}
Number:Dimensionless f_one_position "Remote Button - F1 Preset Position" (G_curtain) {channel="miio:basic:curtain:f_one_position"}
Number:Dimensionless f_two_position "Remote Button - F2 Preset Position" (G_curtain) {channel="miio:basic:curtain:f_two_position"}
Number:Dimensionless f_three_position "Remote Button - F3 Preset Position" (G_curtain) {channel="miio:basic:curtain:f_three_position"}

Mi Smart Home Hub (lumi.gateway.mgl03) item file lines ​

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_gateway "Mi Smart Home Hub" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

Mi smart Home Gateway Hub (lumi.gateway.mieu01) item file lines ​

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_gateway "Mi smart Home Gateway Hub" <status>
Switch guard "Guard" (G_gateway) {channel="miio:gateway:gateway:guard"}
Switch corridor "Automatic Night Light" (G_gateway) {channel="miio:gateway:gateway:corridor"}
Color nightlight "Night Light" (G_gateway) {channel="miio:gateway:gateway:nightlight"}
Color rgb "Colored Light" (G_gateway) {channel="miio:gateway:gateway:rgb"}
Number doorbell_volume "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbell_volume"}
Number alarming_volume "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarming_volume"}
Number gateway_volume "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gateway_volume"}
Number:Time arming_time "Arming Time" (G_gateway) {channel="miio:gateway:gateway:arming_time"}
Number:Time corridor_on_time "Corridor on time" (G_gateway) {channel="miio:gateway:gateway:corridor_on_time"}
String language "Voice prompt Language" (G_gateway) {channel="miio:gateway:gateway:language"}
String zigbee_channel "Zigbee Channel" (G_gateway) {channel="miio:gateway:gateway:zigbee_channel"}
String lumi_bind "Lumi_bind info" (G_gateway) {channel="miio:gateway:gateway:lumi_bind"}
String doorbell_push "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbell_push"}
Switch fm_power "FM Radio Power" (G_gateway) {channel="miio:gateway:gateway:fm_power"}
Dimmer fm_volume "FM Radio Volume" (G_gateway) {channel="miio:gateway:gateway:fm_volume"}
String fm_status "FM Radio Status" (G_gateway) {channel="miio:gateway:gateway:fm_status"}
Number fm_program "FM Radio Program" (G_gateway) {channel="miio:gateway:gateway:fm_program"}

Mi smart Home Gateway Hub v1 (lumi.gateway.v1) item file lines ​

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_gateway "Mi smart Home Gateway Hub v1" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}
Switch fmPower "FM Radio Power" (G_gateway) {channel="miio:gateway:gateway:fmPower"}
Dimmer fmVolume "FM Radio Volume" (G_gateway) {channel="miio:gateway:gateway:fmVolume"}
String fmStatus "FM Radio Status" (G_gateway) {channel="miio:gateway:gateway:fmStatus"}
Number fmProgram "FM Radio Program" (G_gateway) {channel="miio:gateway:gateway:fmProgram"}

Mi smart Home GatewayHub v2 (lumi.gateway.v2) item file lines ​

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_gateway "Mi smart Home GatewayHub v2" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}
Switch fmPower "FM Radio Power" (G_gateway) {channel="miio:gateway:gateway:fmPower"}
Dimmer fmVolume "FM Radio Volume" (G_gateway) {channel="miio:gateway:gateway:fmVolume"}
String fmStatus "FM Radio Status" (G_gateway) {channel="miio:gateway:gateway:fmStatus"}
Number fmProgram "FM Radio Program" (G_gateway) {channel="miio:gateway:gateway:fmProgram"}

Mi smart Home Gateway Hub v3 (lumi.gateway.v3) item file lines ​

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_gateway "Mi smart Home Gateway Hub v3" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}
Switch fmPower "FM Radio Power" (G_gateway) {channel="miio:gateway:gateway:fmPower"}
Dimmer fmVolume "FM Radio Volume" (G_gateway) {channel="miio:gateway:gateway:fmVolume"}
String fmStatus "FM Radio Status" (G_gateway) {channel="miio:gateway:gateway:fmStatus"}
Number fmProgram "FM Radio Program" (G_gateway) {channel="miio:gateway:gateway:fmProgram"}

Aqara LED Light Bulb (Tunable White) (lumi.light.aqcn02) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Aqara LED Light Bulb (Tunable White)" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

Door lock (lumi.lock.v1) item file lines ​

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_lock "Door lock" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Aqara Door Lock (lumi.lock.aq1) item file lines ​

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_lock "Aqara Door Lock" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Aqara Door Lock S2 (lumi.lock.acn02) item file lines ​

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_lock "Aqara Door Lock S2" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Aqara Door lock S2 Pro (lumi.lock.acn03) item file lines ​

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_lock "Aqara Door lock S2 Pro" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

Mi Smart Plug (Zigbee) (lumi.plug.mmeu01) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Mi Smart Plug (Zigbee)" <status>
Switch power "Power" (G_plug) {channel="miio:lumi:plug:power"}
Number load_power "Load Power" (G_plug) {channel="miio:lumi:plug:load_power"}
Switch en_night_tip_light "Led Light" (G_plug) {channel="miio:lumi:plug:en_night_tip_light"}
Switch poweroff_memory "Poweroff Memory" (G_plug) {channel="miio:lumi:plug:poweroff_memory"}
Number max_power "Max Power" (G_plug) {channel="miio:lumi:plug:max_power"}
String log "Device Log" (G_plug) {channel="miio:lumi:plug:log"}

Mi Window and Door Sensor (lumi.sensor_magnet.v2) item file lines ​

note: Autogenerated example. Replace the id (sensor_magnet) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_sensor_magnet "Mi Window and Door Sensor" <status>
String log "Device Log" (G_sensor_magnet) {channel="miio:lumi:sensor_magnet:log"}

Aqara Motion Sensor (lumi.sensor_motion.aq2) item file lines ​

note: Autogenerated example. Replace the id (sensor_motion) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_sensor_motion "Aqara Motion Sensor" <status>
String log "Device Log" (G_sensor_motion) {channel="miio:lumi:sensor_motion:log"}

Mi Motion Sensor (lumi.sensor_motion.v2) item file lines ​

note: Autogenerated example. Replace the id (sensor_motion) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_sensor_motion "Mi Motion Sensor" <status>
String log "Device Log" (G_sensor_motion) {channel="miio:lumi:sensor_motion:log"}

Mi Temperature and Humidity Sensor (lumi.sensor_ht.v1) item file lines ​

note: Autogenerated example. Replace the id (sensor_ht) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_sensor_ht "Mi Temperature and Humidity Sensor" <status>
Number:Temperature temperature "Temperature" (G_sensor_ht) {channel="miio:lumi:sensor_ht:temperature"}
Number:Dimensionless humidity "Humidity" (G_sensor_ht) {channel="miio:lumi:sensor_ht:humidity"}

Water Leak Sensor (lumi.sensor_wleak.aq1) item file lines ​

note: Autogenerated example. Replace the id (sensor_wleak) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_sensor_wleak "Water Leak Sensor" <status>
Switch leak "Leaking" (G_sensor_wleak) {channel="miio:lumi:sensor_wleak:leak"}
String log "Device Log" (G_sensor_wleak) {channel="miio:lumi:sensor_wleak:log"}

Aqara Temperature and Humidity Sensor (lumi.weather.v1) item file lines ​

note: Autogenerated example. Replace the id (weather) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_weather "Aqara Temperature and Humidity Sensor" <status>
Number:Temperature temperature "Temperature" (G_weather) {channel="miio:lumi:weather:temperature"}
Number:Dimensionless humidity "Humidity" (G_weather) {channel="miio:lumi:weather:humidity"}
Number:Pressure pressure "pressure" (G_weather) {channel="miio:lumi:weather:pressure"}

Mi Robot Vacuum-Mop Essential (mijia.vacuum.v2) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop Essential" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number target_water_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:target_water_level"}
Number fan_level "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:fan_level"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Switch alarm "Alarm - Voice Prompts" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number:Dimensionless volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Area clean_area "Clean Record - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number:Time clean_time "Clean Record - Clean Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area total_clean_area "Clean Record - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Time total_clean_time "Clean Record - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_count "Clean Record - Total Clean Count" (G_vacuum) {channel="miio:basic:vacuum:total_clean_count"}
Number language "Voice - Language" (G_vacuum) {channel="miio:basic:vacuum:language"}
Switch not_disturb_switch "Voice - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:not_disturb_switch"}
Switch mop_status "Other Status - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}

Xiaomi Smart Pet Food Feeder (mmgg.feeder.fi1) item file lines ​

note: Autogenerated example. Replace the id (feeder) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_feeder "Xiaomi Smart Pet Food Feeder" <status>
Number food_level "Food Level" (G_feeder) {channel="miio:basic:feeder:food_level"}
Number dispense_food "Dispense Food" (G_feeder) {channel="miio:basic:feeder:dispense_food"}
Switch indicator_light "Indicator Light" (G_feeder) {channel="miio:basic:feeder:indicator_light"}
Switch cover_open "Food Compartment Cover Open" (G_feeder) {channel="miio:basic:feeder:cover_open"}
Switch feeder_blocked "Feeder Blocked" (G_feeder) {channel="miio:basic:feeder:feeder_blocked"}
Switch feeding_schedule "Feeding Schedule" (G_feeder) {channel="miio:basic:feeder:feeding_schedule"}
Switch child_lock "Child Lock" (G_feeder) {channel="miio:basic:feeder:child_lock"}
Number:Time remain_clean_time "Time Until Cleaning" (G_feeder) {channel="miio:basic:feeder:remain_clean_time"}
Number:Time desiccant_left_time "Desiccant Left Time" (G_feeder) {channel="miio:basic:feeder:desiccant_left_time"}
String reset "Reset" (G_feeder) {channel="miio:basic:feeder:reset"}

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s1) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch power "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:power"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch indicator_light "Indicator Light" (G_pet_waterer) {channel="miio:basic:pet_waterer:indicator_light"}
Number:Time cotton_left_time "Cotton Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton_left_time"}
Number:Time remain_clean_time "Time Until Cleaning" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain_clean_time"}
Switch no_water_flag "Water Present" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_flag"}
Number:Time no_water_time "No Water Duration" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_time"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}
Switch lid_up_flag "Lid Lifted" (G_pet_waterer) {channel="miio:basic:pet_waterer:lid_up_flag"}
String reset "Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:reset"}

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s2) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch power "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:power"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch indicator_light "Indicator Light" (G_pet_waterer) {channel="miio:basic:pet_waterer:indicator_light"}
Number:Time cotton_left_time "Cotton Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton_left_time"}
Number:Time remain_clean_time "Time Until Cleaning" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain_clean_time"}
Switch no_water_flag "Water Present" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_flag"}
Number:Time no_water_time "No Water Duration" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_time"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}
String reset "Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:reset"}

Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s3) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch power "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:power"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch indicator_light "Indicator Light" (G_pet_waterer) {channel="miio:basic:pet_waterer:indicator_light"}
Number:Time cotton_left_time "Cotton Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton_left_time"}
Number:Time remain_clean_time "Time Until Cleaning" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain_clean_time"}
Switch no_water_flag "Water Present" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_flag"}
Number:Time no_water_time "No Water Duration" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_time"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}
String reset "Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:reset"}

XIAOWAN Smart Pet Water Dispenser (mmgg.pet_waterer.s4) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "XIAOWAN Smart Pet Water Dispenser" <status>
Number fault "Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch power "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:power"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch indicator_light "Indicator Light" (G_pet_waterer) {channel="miio:basic:pet_waterer:indicator_light"}
Number:Time cotton_left_time "Cotton Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton_left_time"}
Number:Time remain_clean_time "Time Until Cleaning" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain_clean_time"}
Switch no_water_flag "Water Present" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_flag"}
Number:Time no_water_time "No Water Duration" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_time"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}
String reset "Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:reset"}

Xiaomi Smart Pet Fountain (mmgg.pet_waterer.wi11) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "Xiaomi Smart Pet Fountain" <status>
Switch power "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:power"}
Number fault "Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch indicator_light "Indicator Light" (G_pet_waterer) {channel="miio:basic:pet_waterer:indicator_light"}
Number:Time cotton_left_time "Cotton Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton_left_time"}
Number:Time remain_clean_time "Time Until Cleaning" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain_clean_time"}
Switch no_water_flag "Water Present" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_flag"}
Number:Time no_water_time "No Water Duration" (G_pet_waterer) {channel="miio:basic:pet_waterer:no_water_time"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}
Switch lid_up_flag "Lid Lifted" (G_pet_waterer) {channel="miio:basic:pet_waterer:lid_up_flag"}
String reset "Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:reset"}

MR.BOND (mrbond.airer.m0) item file lines ​

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airer "MR.BOND" <status>
Switch led "LED" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}

MR.BOND (mrbond.airer.m1pro) item file lines ​

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Number drymode "Dry Mode" (G_airer) {channel="miio:basic:airer:drymode"}
Switch led "LED" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number:Time drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}

MR.BOND (mrbond.airer.m1s) item file lines ​

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airer "MR.BOND" <status>
Switch led "LED" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}

MR.BOND (mrbond.airer.m1super) item file lines ​

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Number drymode "Dry Mode" (G_airer) {channel="miio:basic:airer:drymode"}
Switch led "LED" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number:Time drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "Disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number:Time distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

NWT/Widetech Intelligent Dehumidifier 16L (nwt.derh.16l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "NWT/Widetech Intelligent Dehumidifier 16L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}

NWT/Widetech Internet Air Clean Dehumidifier 24L (nwt.derh.24wu1) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "NWT/Widetech Internet Air Clean Dehumidifier 24L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Number dry_clothes "Dry Clothes" (G_derh) {channel="miio:basic:derh:dry_clothes"}
Number swing_wind "Swing" (G_derh) {channel="miio:basic:derh:swing_wind"}
Number uv "UV-C" (G_derh) {channel="miio:basic:derh:uv"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}

NWT/Widetech Internet Dehumidifier 12L (nwt.derh.312en) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "NWT/Widetech Internet Dehumidifier 12L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Number:Temperature coil_temperature "Coil Temperature" (G_derh) {channel="miio:basic:derh:coil_temperature"}
Switch compressor "Compressor" (G_derh) {channel="miio:basic:derh:compressor"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Number:Time timer "Timer Remaining" (G_derh) {channel="miio:basic:derh:timer"}
Number timer_setting "Off Timer" (G_derh) {channel="miio:basic:derh:timer_setting"}

NWT/Widetech Internet Dehumidifier 30L (nwt.derh.330ef) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "NWT/Widetech Internet Dehumidifier 30L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Number:Temperature coil_temperature "Coil Temperature" (G_derh) {channel="miio:basic:derh:coil_temperature"}
Switch compressor "Compressor" (G_derh) {channel="miio:basic:derh:compressor"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch fallen_over "Fallen Over" (G_derh) {channel="miio:basic:derh:fallen_over"}
Switch pump "Drain Pump" (G_derh) {channel="miio:basic:derh:pump"}
Switch pump_pipe_installed "Drain Pipe Connected" (G_derh) {channel="miio:basic:derh:pump_pipe_installed"}
Number:Time timer "Timer Remaining" (G_derh) {channel="miio:basic:derh:timer"}
Number timer_setting "Off Timer" (G_derh) {channel="miio:basic:derh:timer_setting"}

Lumias 20L Dehumidifier (nwt.derh.las20l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 20L Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}
Switch swing "Swing" (G_derh) {channel="miio:basic:derh:swing"}

Lumias 12L Dehumidifier (nwt.derh.lua12l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 12L Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}

Lumias 30L Dehumidifier (nwt.derh.lua30l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 30L Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}

Lumias 12L (nwt.derh.lus12l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 12L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}

Lumias 20L (nwt.derh.lus20l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 20L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}

Lumias 26L Dehumidifier (nwt.derh.lus24l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 26L Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Number dry_clothes "Dry Clothes" (G_derh) {channel="miio:basic:derh:dry_clothes"}
Number swing_wind "Swing" (G_derh) {channel="miio:basic:derh:swing_wind"}
Number uv "UV" (G_derh) {channel="miio:basic:derh:uv"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}

Lumias 30L Dehumidifier (nwt.derh.lus30l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 30L Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}
Switch swing "Swing" (G_derh) {channel="miio:basic:derh:swing"}

Lumias 60L (nwt.derh.lus60l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Lumias 60L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}

NWT/Widetech Intelligent Dehumidifier 12L (nwt.derh.nwt12l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "NWT/Widetech Intelligent Dehumidifier 12L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch filter_cleaning "Filter Cleaning Reminder" (G_derh) {channel="miio:basic:derh:filter_cleaning"}

NWT/Widetech Internet Dehumidifier 18L (nwt.derh.wdh318efw1) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "NWT/Widetech Internet Dehumidifier 18L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
String mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Number fan_speed "Fan Speed" (G_derh) {channel="miio:basic:derh:fan_speed"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Indicator Light" (G_derh) {channel="miio:basic:derh:led"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch water_tank_full "Water Tank Full" (G_derh) {channel="miio:basic:derh:water_tank_full"}
Switch compressor "Compressor" (G_derh) {channel="miio:basic:derh:compressor"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
String alarm "Alarm" (G_derh) {channel="miio:basic:derh:alarm"}

Xiaomi Smart Sleep and Wake-up Light (philips.light.aibed) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Xiaomi Smart Sleep and Wake-up Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Color color "Color" (G_light) {channel="miio:basic:light:color"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Number modeMain "Mode" (G_light) {channel="miio:basic:light:modeMain"}
Number modeLight "Light Mode Preset" (G_light) {channel="miio:basic:light:modeLight"}
Number modeSleep "Sleep Mode Preset" (G_light) {channel="miio:basic:light:modeSleep"}
Number modeScene "Scene Mode Preset" (G_light) {channel="miio:basic:light:modeScene"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Number:Time sleepDuration "Sleep Mode Duration" (G_light) {channel="miio:basic:light:sleepDuration"}
Number:Time sleepRemainTime "Sleep Mode Remaining Time" (G_light) {channel="miio:basic:light:sleepRemainTime"}
Number:Dimensionless sleepStartBrightness "Sleep Mode Starting Brightness" (G_light) {channel="miio:basic:light:sleepStartBrightness"}
Dimmer sleepVolume "Sleep Mode Volume" (G_light) {channel="miio:basic:light:sleepVolume"}
Dimmer sceneVolume "Scene Mode Volume" (G_light) {channel="miio:basic:light:sceneVolume"}
Switch nightLight "Night Light Mode" (G_light) {channel="miio:basic:light:nightLight"}
Number nightStartHour "Night Light Start Hour" (G_light) {channel="miio:basic:light:nightStartHour"}
Number nightStartMinute "Night Light Start Minute" (G_light) {channel="miio:basic:light:nightStartMinute"}
Number nightEndHour "Night Light End Hour" (G_light) {channel="miio:basic:light:nightEndHour"}
Number nightEndMinute "Night Light End Minute" (G_light) {channel="miio:basic:light:nightEndMinute"}
Switch wakeupAlarm1 "Wake-up Alarm 1" (G_light) {channel="miio:basic:light:wakeupAlarm1"}
Switch wakeupAlarm2 "Wake-up Alarm 2" (G_light) {channel="miio:basic:light:wakeupAlarm2"}
Switch wakeupAlarm3 "Wake-up Alarm 3" (G_light) {channel="miio:basic:light:wakeupAlarm3"}
Number sleepState "Sleep State" (G_light) {channel="miio:basic:light:sleepState"}
Number wakeupState "Wake-up State" (G_light) {channel="miio:basic:light:wakeupState"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Living room 80W (philips.light.bceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Living room 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceil1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Bedroom 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceil2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Bedroom 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceiling1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Bedroom 40W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceiling2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Bedroom 28W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips BlueSky Lamp (philips.light.blue) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips BlueSky Lamp" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Blue Sky G2 (philips.light.blue1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Blue Sky G2" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
Switch upLightMode "Uplight RGB Mode" (G_light) {channel="miio:basic:light:upLightMode"}
Dimmer upLightColorBrightness "Uplight RGB Brightness" (G_light) {channel="miio:basic:light:upLightColorBrightness"}
Number:Temperature upLightCct "Uplight Color Temperature" (G_light) {channel="miio:basic:light:upLightCct"}
Dimmer upLightWhiteBrightness "Uplight White Brightness" (G_light) {channel="miio:basic:light:upLightWhiteBrightness"}
Switch downLightMode "Downlight RGB Mode" (G_light) {channel="miio:basic:light:downLightMode"}
Dimmer downLightColorBrightness "Downlight RGB Brightness" (G_light) {channel="miio:basic:light:downLightColorBrightness"}
Number:Temperature downLightCct "Downlight Color Temperature" (G_light) {channel="miio:basic:light:downLightCct"}
Dimmer downLightWhiteBrightness "Downlight White Brightness" (G_light) {channel="miio:basic:light:downLightWhiteBrightness"}
Dimmer skyBrightness "Sky Brightness" (G_light) {channel="miio:basic:light:skyBrightness"}
Number:Temperature sunCct "Sunlight Color Temperature" (G_light) {channel="miio:basic:light:sunCct"}
Dimmer sunBrightness "Sunlight Brightness" (G_light) {channel="miio:basic:light:sunBrightness"}
Switch circadianRhythm "Circadian Rhythm" (G_light) {channel="miio:basic:light:circadianRhythm"}
String circadianRhythmTimes "Circadian Rhythm Times" (G_light) {channel="miio:basic:light:circadianRhythmTimes"}
Switch circadianAuto "Circadian Rhythm Auto Adjustment" (G_light) {channel="miio:basic:light:circadianAuto"}
Switch sleepMode "Sleep Mode" (G_light) {channel="miio:basic:light:sleepMode"}
Number:Time sleepTime "Sleep Mode Time" (G_light) {channel="miio:basic:light:sleepTime"}
Number:Time sleepRemainTime "Sleep Mode Remaining Time" (G_light) {channel="miio:basic:light:sleepRemainTime"}
Switch sleepUnavailable "Sleep Mode Unavailable" (G_light) {channel="miio:basic:light:sleepUnavailable"}
Switch nightLight "Night Light" (G_light) {channel="miio:basic:light:nightLight"}
Number:Time nightStartTime "Night Light Start Time" (G_light) {channel="miio:basic:light:nightStartTime"}
Number:Time nightEndTime "Night Light End Time" (G_light) {channel="miio:basic:light:nightEndTime"}
Switch sunriseAlarm1 "Sunrise Alarm 1" (G_light) {channel="miio:basic:light:sunriseAlarm1"}
Switch sunriseAlarm2 "Sunrise Alarm 2" (G_light) {channel="miio:basic:light:sunriseAlarm2"}
Switch sunriseAlarm3 "Sunrise Alarm 3" (G_light) {channel="miio:basic:light:sunriseAlarm3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiYi Ceiling lamp FL2 80W (philips.light.boc1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling lamp FL2 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiYi Ceiling lamp FL2 40W (philips.light.boc2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling lamp FL2 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiYi Ceiling lamp FL2 28W (philips.light.boc3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling lamp FL2 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiRui E27 bulb (philips.light.bulb) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiRui E27 bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiRui E14 Candle Lamp Frosted version (philips.light.candle) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiRui E14 Candle Lamp Frosted version" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiRui E14 Candle Lamp Crystal version (philips.light.candle2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiRui E14 Candle Lamp Crystal version" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Mijia Philips Color Bulb (philips.light.cbulb) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Philips Color Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number cid "Hue" (G_light) {channel="miio:basic:light:cid"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}

Philips Light (philips.light.cbulbs) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number cid "Hue" (G_light) {channel="miio:basic:light:cid"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}

Philips PingYi Ceiling Light 130W (philips.light.ce130c) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips PingYi Ceiling Light 130W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips YingLe Ceiling Light 130W (philips.light.ce130x) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips YingLe Ceiling Light 130W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiBai Ceiling Light 130W (philips.light.ce13zx) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiBai Ceiling Light 130W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips XingHuan Ceiling Light 36W (philips.light.ce36c) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips XingHuan Ceiling Light 36W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips YingLe Ceiling Light 36W (philips.light.ce36x) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips YingLe Ceiling Light 36W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips XingHuan Ceiling Light 48W (philips.light.ce48c) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips XingHuan Ceiling Light 48W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiBai Ceiling Light 48W (philips.light.ce48x) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiBai Ceiling Light 48W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips XingHuan Ceiling Light 80W (philips.light.ce80c) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips XingHuan Ceiling Light 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips YingLe Ceiling Light 80W (philips.light.ce80yc) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips YingLe Ceiling Light 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mi & Philips Ceiling Lamp Lamina 33W (philips.light.ceil33) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi & Philips Ceiling Lamp Lamina 33W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Switch flexSwitch "Flex Switch" (G_light) {channel="miio:basic:light:flexSwitch"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
Switch mibandSleep "Mi Band Sleep Turn-off" (G_light) {channel="miio:basic:light:mibandSleep"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
Switch nightLight "Smart Midnight Light" (G_light) {channel="miio:basic:light:nightLight"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Smart Light (philips.light.ceilfi) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Smart Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Number defaultPowerOnState "Default Power On State" (G_light) {channel="miio:basic:light:defaultPowerOnState"}
Switch nightLightSwitch "Smart Night Light" (G_light) {channel="miio:basic:light:nightLightSwitch"}
String nightLightPeriod "Smart Night Light Time Period" (G_light) {channel="miio:basic:light:nightLightPeriod"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Connected Ceiling (philips.light.ceiling) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Connected Ceiling" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Mi & Philips Ceiling Lamp Lamina 80W (philips.light.ceilp) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi & Philips Ceiling Lamp Lamina 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Switch flexSwitch "Flex Switch" (G_light) {channel="miio:basic:light:flexSwitch"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
Switch mibandSleep "Mi Band Sleep Turn-off" (G_light) {channel="miio:basic:light:mibandSleep"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom S (philips.light.ceilz) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom S" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom L (philips.light.ceilz1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Jianyue G2 Bedroom L" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Jianyue G2 Living Room S (philips.light.ceilz2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Jianyue G2 Living Room S" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Jianyue G2 Living Room L (philips.light.ceilz3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Jianyue G2 Living Room L" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Light (philips.light.dcolor) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number cid "Hue" (G_light) {channel="miio:basic:light:cid"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}

ZhiRui Dimmable Downlight (philips.light.dlight) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "ZhiRui Dimmable Downlight" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiRui Downlight (philips.light.downlight) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiRui Downlight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips C9 Ceiling Light 120W (philips.light.eceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips C9 Ceiling Light 120W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch flexSwitch "Momentary Contact Switch" (G_light) {channel="miio:basic:light:flexSwitch"}
Number detectionSensitivity "Fall Detection Sensitivity" (G_light) {channel="miio:basic:light:detectionSensitivity"}
Number fallCondition "Fall Status" (G_light) {channel="miio:basic:light:fallCondition"}
Number:Time delayCall "Fall Alert Delay" (G_light) {channel="miio:basic:light:delayCall"}
Switch fallAlert "Fall Alert" (G_light) {channel="miio:basic:light:fallAlert"}
Number sensorStatus "Sensor Status" (G_light) {channel="miio:basic:light:sensorStatus"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String wallScene4 "Wall Switch Scene 4" (G_light) {channel="miio:basic:light:wallScene4"}
Number nightMode "Smart Night Light Mode" (G_light) {channel="miio:basic:light:nightMode"}
Number:Dimensionless nightBrightness "Night Light Brightness" (G_light) {channel="miio:basic:light:nightBrightness"}
Switch nightOn "Night Light" (G_light) {channel="miio:basic:light:nightOn"}
Switch changeSpeedEnable "Gradual Brightness Adjustment" (G_light) {channel="miio:basic:light:changeSpeedEnable"}
Number changeSpeed "Gradual Brightness Adjustment Speed" (G_light) {channel="miio:basic:light:changeSpeed"}
Switch bedMonitoring "Bedtime Monitoring" (G_light) {channel="miio:basic:light:bedMonitoring"}
String bedMonitoringPeriod "Bedtime Monitoring Period" (G_light) {channel="miio:basic:light:bedMonitoringPeriod"}
Switch bedMonitoringAlert "Abnormal Behavior Alert" (G_light) {channel="miio:basic:light:bedMonitoringAlert"}
Number:Time bedDuration "Bedtime Duration" (G_light) {channel="miio:basic:light:bedDuration"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips C9 Ceiling Light 55W (philips.light.ecl01) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips C9 Ceiling Light 55W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch flexSwitch "Momentary Contact Switch" (G_light) {channel="miio:basic:light:flexSwitch"}
Number detectionSensitivity "Fall Detection Sensitivity" (G_light) {channel="miio:basic:light:detectionSensitivity"}
Number fallCondition "Fall Status" (G_light) {channel="miio:basic:light:fallCondition"}
Number:Time delayCall "Fall Alert Delay" (G_light) {channel="miio:basic:light:delayCall"}
Switch fallAlert "Fall Alert" (G_light) {channel="miio:basic:light:fallAlert"}
Number sensorStatus "Sensor Status" (G_light) {channel="miio:basic:light:sensorStatus"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String wallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:wallScene1"}
String wallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:wallScene2"}
String wallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:wallScene3"}
String wallScene4 "Wall Switch Scene 4" (G_light) {channel="miio:basic:light:wallScene4"}
Number nightMode "Smart Night Light Mode" (G_light) {channel="miio:basic:light:nightMode"}
Number:Dimensionless nightBrightness "Night Light Brightness" (G_light) {channel="miio:basic:light:nightBrightness"}
Switch nightOn "Night Light" (G_light) {channel="miio:basic:light:nightOn"}
Switch changeSpeedEnable "Gradual Brightness Adjustment" (G_light) {channel="miio:basic:light:changeSpeedEnable"}
Number changeSpeed "Gradual Brightness Adjustment Speed" (G_light) {channel="miio:basic:light:changeSpeed"}
Switch bedMonitoring "Bedtime Monitoring" (G_light) {channel="miio:basic:light:bedMonitoring"}
String bedMonitoringPeriod "Bedtime Monitoring Period" (G_light) {channel="miio:basic:light:bedMonitoringPeriod"}
Switch bedMonitoringAlert "Abnormal Behavior Alert" (G_light) {channel="miio:basic:light:bedMonitoringAlert"}
Number:Time bedDuration "Bedtime Duration" (G_light) {channel="miio:basic:light:bedDuration"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips C9 Panel Light 24W (philips.light.epan) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips C9 Panel Light 24W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch flexSwitch "Momentary Contact Switch" (G_light) {channel="miio:basic:light:flexSwitch"}
Switch fallAlert "Fall Alert" (G_light) {channel="miio:basic:light:fallAlert"}
Number fallStatus "Fall Status" (G_light) {channel="miio:basic:light:fallStatus"}
Number:Time fallAlertDelay "Fall Alert Delay" (G_light) {channel="miio:basic:light:fallAlertDelay"}
Number detectionSensitivity "Fall Detection Sensitivity" (G_light) {channel="miio:basic:light:detectionSensitivity"}
Number sensorStatus "Sensor Status" (G_light) {channel="miio:basic:light:sensorStatus"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:WallScene1"}
String WallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:WallScene2"}
Switch autoOnOff "Auto On/Off" (G_light) {channel="miio:basic:light:autoOnOff"}
Number:Time autoOffDelay "Auto Off Delay" (G_light) {channel="miio:basic:light:autoOffDelay"}
Number autoOnDistance "Auto On Distance" (G_light) {channel="miio:basic:light:autoOnDistance"}
Number autoOnAmbientBrightness "Auto On Ambient Brightness" (G_light) {channel="miio:basic:light:autoOnAmbientBrightness"}
Switch nightLight "Automatic Night Light" (G_light) {channel="miio:basic:light:nightLight"}
String nightLightTime "Automatic Night Light Time" (G_light) {channel="miio:basic:light:nightLightTime"}
Switch gradualAdjust "Gradual Brightness Adjustment" (G_light) {channel="miio:basic:light:gradualAdjust"}
Number gradualSpeed "Gradual Brightness Speed" (G_light) {channel="miio:basic:light:gradualSpeed"}
Switch toiletMonitor "Toilet Monitoring" (G_light) {channel="miio:basic:light:toiletMonitor"}
String toiletMonitorTime "Toilet Monitoring Time" (G_light) {channel="miio:basic:light:toiletMonitorTime"}
Number toiletMonitorUsers "Toilet Monitoring Users" (G_light) {channel="miio:basic:light:toiletMonitorUsers"}
Switch toiletMonitorAlert "Toilet Monitoring Alert" (G_light) {channel="miio:basic:light:toiletMonitorAlert"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips F9 Lite Floor Light (philips.light.fl) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips F9 Lite Floor Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch upOn "Uplight" (G_light) {channel="miio:basic:light:upOn"}
Dimmer upBrightness "Uplight Brightness" (G_light) {channel="miio:basic:light:upBrightness"}
Switch downOn "Downlight" (G_light) {channel="miio:basic:light:downOn"}
Dimmer downBrightness "Downlight Brightness" (G_light) {channel="miio:basic:light:downBrightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch autoEn "Auto Dimming" (G_light) {channel="miio:basic:light:autoEn"}
Switch nightLight "Smart Night Light" (G_light) {channel="miio:basic:light:nightLight"}
Number:Time nightStartTime "Night Light Start Time" (G_light) {channel="miio:basic:light:nightStartTime"}
Number:Time nightEndTime "Night Light End Time" (G_light) {channel="miio:basic:light:nightEndTime"}
Switch isNight "Night Light Active" (G_light) {channel="miio:basic:light:isNight"}
Switch syncSunlight "Sync with Sunlight" (G_light) {channel="miio:basic:light:syncSunlight"}
Switch sunriseAlarm "Sunrise Alarm" (G_light) {channel="miio:basic:light:sunriseAlarm"}
String sunriseAlarmSetting "Sunrise Alarm Setting" (G_light) {channel="miio:basic:light:sunriseAlarmSetting"}
Number:Illuminance lux "Illuminance" (G_light) {channel="miio:basic:light:lux"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zeeray Fall Detection Panel Light (philips.light.flat) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zeeray Fall Detection Panel Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer customBrightness "Custom Scene Brightness" (G_light) {channel="miio:basic:light:customBrightness"}
Switch nightLight "Night Light Period" (G_light) {channel="miio:basic:light:nightLight"}
Number nightStart "Night Light Start" (G_light) {channel="miio:basic:light:nightStart"}
Number nightEnd "Night Light End" (G_light) {channel="miio:basic:light:nightEnd"}
Number guardStatus "Room Status" (G_light) {channel="miio:basic:light:guardStatus"}
Number activeEvent "Last Event" (G_light) {channel="miio:basic:light:activeEvent"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Wi-Fi bulb E27 White (philips.light.hbulb) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Wi-Fi bulb E27 White" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Ceiling Lamp FL 40W (philips.light.lnblight1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling Lamp FL 40W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Ceiling Lamp FL 28W (philips.light.lnblight2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling Lamp FL 28W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Ceiling Lamp FL 80W (philips.light.lnlrlight) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling Lamp FL 80W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips Zhirui Ceiling Lamp Living room 80W (philips.light.lrceiling) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Living room 80W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips Zhirui Ceiling Lamp Liuying G2 Living Room L (philips.light.lying1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Liuying G2 Living Room L" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Liuying G2 Living Room S (philips.light.lying2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Liuying G2 Living Room S" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Liuying G2 Bedroom L (philips.light.lying3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Liuying G2 Bedroom L" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Liuying G2 Bedroom S (philips.light.lying4) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Liuying G2 Bedroom S" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
String delayOff "Delayed Turn-off" (G_light) {channel="miio:basic:light:delayOff"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Nordic 80W (philips.light.mceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Nordic 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Nordic 40W (philips.light.mceilm) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Nordic 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Nordic 28W (philips.light.mceils) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Nordic 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Shadow 80W (philips.light.mm1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Shadow 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Shadow 40W (philips.light.mm2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Shadow 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Shadow 28W (philips.light.mm3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Shadow 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Smart Lamp (philips.light.mono1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Smart Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}

Philips ZhiRui Bedside Lamp (philips.light.moonlight) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiRui Bedside Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch gonight "Midnight Mode" (G_light) {channel="miio:basic:light:gonight"}

Zhirui Ceiling Lamp Black 80W (philips.light.obceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Black 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Black 40W (philips.light.obceim) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Black 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Black 28W (philips.light.obceis) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Black 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mijia Smart LED Ceiling Light Pro (Living Room) (philips.light.pceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Smart LED Ceiling Light Pro (Living Room)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number powerOnState "Power-on State" (G_light) {channel="miio:basic:light:powerOnState"}
Number workMode "Light Work Mode" (G_light) {channel="miio:basic:light:workMode"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:WallScene1"}
String WallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:WallScene2"}
String WallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:WallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips sustainable pendent light (philips.light.pceil1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips sustainable pendent light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:WallScene1"}
String WallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:WallScene2"}
String WallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:WallScene3"}
Switch autoCct "Circadian Light" (G_light) {channel="miio:basic:light:autoCct"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mijia Smart LED Ceiling Light Pro (Bedroom) (philips.light.pceilb) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Smart LED Ceiling Light Pro (Bedroom)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number powerOnState "Power-on State" (G_light) {channel="miio:basic:light:powerOnState"}
Number workMode "Light Work Mode" (G_light) {channel="miio:basic:light:workMode"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene1 "Wall Switch Scene 1" (G_light) {channel="miio:basic:light:WallScene1"}
String WallScene2 "Wall Switch Scene 2" (G_light) {channel="miio:basic:light:WallScene2"}
String WallScene3 "Wall Switch Scene 3" (G_light) {channel="miio:basic:light:WallScene3"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mijia Smart Piano Light (philips.light.piano) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Smart Piano Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch metronome "Metronome" (G_light) {channel="miio:basic:light:metronome"}
Number metronomeBeat "Metronome Time Signature" (G_light) {channel="miio:basic:light:metronomeBeat"}
Number metronomeBpm "Metronome Tempo" (G_light) {channel="miio:basic:light:metronomeBpm"}
Dimmer metronomeVolume "Metronome Volume" (G_light) {channel="miio:basic:light:metronomeVolume"}
Switch remoteLowBattery "Remote Control Low Battery" (G_light) {channel="miio:basic:light:remoteLowBattery"}
Switch seatAutoOn "Sit to Turn On Light" (G_light) {channel="miio:basic:light:seatAutoOn"}
Switch seatAutoOff "Leave to Turn Off" (G_light) {channel="miio:basic:light:seatAutoOff"}
Number:Time seatAwayTime "Time After Leaving Seat" (G_light) {channel="miio:basic:light:seatAwayTime"}
Number autoSensitivity "Seat Detection Sensitivity" (G_light) {channel="miio:basic:light:autoSensitivity"}
Switch tuningReminder "Tuning Reminder" (G_light) {channel="miio:basic:light:tuningReminder"}
String lastTuningDate "Last Tuning Date" (G_light) {channel="miio:basic:light:lastTuningDate"}
Switch tuningReminderExpired "Tuning Reminder Expired" (G_light) {channel="miio:basic:light:tuningReminderExpired"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mijia Philips Study Desk Lamp (philips.light.rwread) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Philips Study Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch flm "Follow Me" (G_light) {channel="miio:basic:light:flm"}
Number flmv "Follow Me Sensitivity" (G_light) {channel="miio:basic:light:flmv"}
Switch chl "Child Lock" (G_light) {channel="miio:basic:light:chl"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Zhirui Ceiling Lamp Starry 80W (philips.light.sceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Starry 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Starry 40W (philips.light.sceilm) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Starry 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Starry 28W (philips.light.sceils) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Starry 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips EyeCare Connected Desk Lamp gen2. (philips.light.sread1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips EyeCare Connected Desk Lamp gen2." <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch notifyuser "Eye Fatigue Reminder" (G_light) {channel="miio:basic:light:notifyuser"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Mijia Philips Desk Lamp 2S (philips.light.sread2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Philips Desk Lamp 2S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch notifyuser "Eye Fatigue Reminder" (G_light) {channel="miio:basic:light:notifyuser"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Mijia Philips Desk Lamp 3 (philips.light.sread3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Philips Desk Lamp 3" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch eyecare "Eye Protection Mode" (G_light) {channel="miio:basic:light:eyecare"}
Switch notifyUser "Eye Strain Notification" (G_light) {channel="miio:basic:light:notifyUser"}
Number:Time notifyTime "Eye Strain Notification Interval" (G_light) {channel="miio:basic:light:notifyTime"}
Number:Time lastDv "Last Delayed Turn-off Time" (G_light) {channel="miio:basic:light:lastDv"}
Switch nightLight "Night Light" (G_light) {channel="miio:basic:light:nightLight"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

ZhiRui read & write Desk Lamp Wi-Fi (philips.light.sread4) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "ZhiRui read & write Desk Lamp Wi-Fi" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch notifyUser "Eye Strain Notification" (G_light) {channel="miio:basic:light:notifyUser"}
Number:Time notifyTime "Eye Strain Notification Interval" (G_light) {channel="miio:basic:light:notifyTime"}
Number:Time lastDv "Last Delayed Turn-off Time" (G_light) {channel="miio:basic:light:lastDv"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Desk Lamp 2S (philips.light.sread6) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Desk Lamp 2S" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch nightLight "Night Light" (G_light) {channel="miio:basic:light:nightLight"}
Switch notifyUser "Eye Strain Notification" (G_light) {channel="miio:basic:light:notifyUser"}
Switch eyecare "Eye Protection Mode" (G_light) {channel="miio:basic:light:eyecare"}
Switch ambientPower "Ambient Light" (G_light) {channel="miio:basic:light:ambientPower"}
Dimmer ambientBrightness "Ambient Light Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time lastDv "Last Delayed Turn-off Time" (G_light) {channel="miio:basic:light:lastDv"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhixiu Desk Lamp (philips.light.sread8) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhixiu Desk Lamp" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch nightLight "Night Light" (G_light) {channel="miio:basic:light:nightLight"}
Switch notifyUser "Eye Strain Notification" (G_light) {channel="miio:basic:light:notifyUser"}
Switch eyecare "Eye Protection Mode" (G_light) {channel="miio:basic:light:eyecare"}
Switch ambientPower "Ambient Light" (G_light) {channel="miio:basic:light:ambientPower"}
Dimmer ambientBrightness "Ambient Light Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time lastDv "Last Delayed Turn-off Time" (G_light) {channel="miio:basic:light:lastDv"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Mijia Smart LED Desk Lamp Pro (Reading Version) (philips.light.sread9) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mijia Smart LED Desk Lamp Pro (Reading Version)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch notifyUser "Eye Strain Notification" (G_light) {channel="miio:basic:light:notifyUser"}
Number:Time notifyTime "Eye Strain Notification Interval" (G_light) {channel="miio:basic:light:notifyTime"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips F9 Floor Light (philips.light.street) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips F9 Floor Light" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Switch upOn "Uplight" (G_light) {channel="miio:basic:light:upOn"}
Dimmer upBrightness "Uplight Brightness" (G_light) {channel="miio:basic:light:upBrightness"}
Switch downOn "Downlight" (G_light) {channel="miio:basic:light:downOn"}
Dimmer downBrightness "Downlight Brightness" (G_light) {channel="miio:basic:light:downBrightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Switch delay "Delayed Turn-off" (G_light) {channel="miio:basic:light:delay"}
Number:Time delayTime "Delayed Turn-off Time" (G_light) {channel="miio:basic:light:delayTime"}
Number:Time delayRemainTime "Delayed Turn-off Remaining Time" (G_light) {channel="miio:basic:light:delayRemainTime"}
Switch autoEn "Auto Detection" (G_light) {channel="miio:basic:light:autoEn"}
Switch nightLight "Smart Night Light" (G_light) {channel="miio:basic:light:nightLight"}
Number:Time nightStartTime "Night Light Start Time" (G_light) {channel="miio:basic:light:nightStartTime"}
Number:Time nightEndTime "Night Light End Time" (G_light) {channel="miio:basic:light:nightEndTime"}
Switch isNight "Night Light Active" (G_light) {channel="miio:basic:light:isNight"}
Switch syncSunlight "Sync with Sunlight" (G_light) {channel="miio:basic:light:syncSunlight"}
Switch sunriseAlarm "Sunrise Alarm" (G_light) {channel="miio:basic:light:sunriseAlarm"}
String sunriseAlarmSetting "Sunrise Alarm Setting" (G_light) {channel="miio:basic:light:sunriseAlarmSetting"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

ZhiRui RGB strip (philips.light.strip2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "ZhiRui RGB strip" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Color color "Color" (G_light) {channel="miio:basic:light:color"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Xiaomi Smart Lightstrip Pro (philips.light.strip3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Xiaomi Smart Lightstrip Pro" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Color color "Color" (G_light) {channel="miio:basic:light:color"}
Switch musicSync "Music Sync" (G_light) {channel="miio:basic:light:musicSync"}
Switch tvSync "TV Sync" (G_light) {channel="miio:basic:light:tvSync"}
Switch tvConnected "TV Connected" (G_light) {channel="miio:basic:light:tvConnected"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
String rhythmColor "Music Sync Colors" (G_light) {channel="miio:basic:light:rhythmColor"}
Number rhythmSensitivity "Music Sync Sensitivity" (G_light) {channel="miio:basic:light:rhythmSensitivity"}
Number rhythmAnimation "Music Sync Effect" (G_light) {channel="miio:basic:light:rhythmAnimation"}
Number diyId "Custom Mode" (G_light) {channel="miio:basic:light:diyId"}
Number stripLength "Strip Length" (G_light) {channel="miio:basic:light:stripLength"}
String controlScene "Control Box Modes" (G_light) {channel="miio:basic:light:controlScene"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Xiaomi Smart Lightstrip Pro (philips.light.strip5) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Xiaomi Smart Lightstrip Pro" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Color color "Color" (G_light) {channel="miio:basic:light:color"}
Switch musicSync "Music Sync" (G_light) {channel="miio:basic:light:musicSync"}
Switch tvSync "TV Sync" (G_light) {channel="miio:basic:light:tvSync"}
Switch tvConnected "TV Connected" (G_light) {channel="miio:basic:light:tvConnected"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
String rhythmColor "Music Sync Colors" (G_light) {channel="miio:basic:light:rhythmColor"}
Number rhythmSensitivity "Music Sync Sensitivity" (G_light) {channel="miio:basic:light:rhythmSensitivity"}
Number rhythmAnimation "Music Sync Effect" (G_light) {channel="miio:basic:light:rhythmAnimation"}
Number diyId "Custom Mode" (G_light) {channel="miio:basic:light:diyId"}
Number stripLength "Strip Length" (G_light) {channel="miio:basic:light:stripLength"}
String controlScene "Control Box Modes" (G_light) {channel="miio:basic:light:controlScene"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Connected Lights (philips.light.virtual) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Connected Lights" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Zhirui Ceiling Lamp Gorgeous 80W (philips.light.xzceil) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Gorgeous 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Gorgeous 40W (philips.light.xzceim) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Gorgeous 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Zhirui Ceiling Lamp Gorgeous 28W (philips.light.xzceis) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Zhirui Ceiling Lamp Gorgeous 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Halo 80W (philips.light.yb1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Halo 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Halo 40W (philips.light.yb2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Halo 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips Zhirui Ceiling Lamp Halo 28W (philips.light.yb3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips Zhirui Ceiling Lamp Halo 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Scene" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number:Time dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Switch Scenes" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Switch Scene List" (G_light) {channel="miio:basic:light:WallScene"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String autoCct "Automatic Color Temperature" (G_light) {channel="miio:basic:light:autoCct"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

Philips ZhiYi Ceiling lamp (philips.light.zyceiling) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Ceiling lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Desk Lamp (philips.light.zysread) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch notifyuser "Eye Fatigue Reminder" (G_light) {channel="miio:basic:light:notifyuser"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Philips ZhiYi Strip (philips.light.zystrip) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Philips ZhiYi Strip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number:Time dv "Delay Off Countdown" (G_light) {channel="miio:basic:light:dv"}
Switch bl "Smart Midnight Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "Auto Power Off when Asleep (Mi Band)" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Color Temperature" (G_light) {channel="miio:basic:light:ac"}
Switch mb "Auto On/Off when Mi Band is Nearby" (G_light) {channel="miio:basic:light:mb"}
Switch switch_en "Wall Switch Scenes" (G_light) {channel="miio:basic:light:switch_en"}
Number:Time delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

Xiaomi Smart Plug 2 (qmi.plug.tw02) item file lines ​

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_plug "Xiaomi Smart Plug 2" <status>
String actions "Actions" (G_plug) {channel="miio:basic:plug:actions"}
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch led "Indicator Light" (G_plug) {channel="miio:basic:plug:led"}
Number:Energy power_consumption "Energy Consumption" (G_plug) {channel="miio:basic:plug:power_consumption"}
Number:Power electric_power "Active Power" (G_plug) {channel="miio:basic:plug:electric_power"}
Switch physical_controls_locked "Child Lock" (G_plug) {channel="miio:basic:plug:physical_controls_locked"}
Switch loop_task "Loop Task" (G_plug) {channel="miio:basic:plug:loop_task"}
Number:Time on_duration "Loop On Duration" (G_plug) {channel="miio:basic:plug:on_duration"}
Number:Time off_duration "Loop Off Duration" (G_plug) {channel="miio:basic:plug:off_duration"}
Switch countdown_enable "Countdown" (G_plug) {channel="miio:basic:plug:countdown_enable"}
Number:Time countdown_time "Countdown Time" (G_plug) {channel="miio:basic:plug:countdown_time"}
Number:Time countdown_remaining_time "Countdown Remaining Time" (G_plug) {channel="miio:basic:plug:countdown_remaining_time"}
Switch countdown_end_state "Countdown End State" (G_plug) {channel="miio:basic:plug:countdown_end_state"}
Switch charging_protection "Charging Protection" (G_plug) {channel="miio:basic:plug:charging_protection"}
Number:Power charging_protection_power "Charging Protection Threshold" (G_plug) {channel="miio:basic:plug:charging_protection_power"}
Number:Time charging_protection_time "Charging Protection Duration" (G_plug) {channel="miio:basic:plug:charging_protection_time"}

CHINGMI Smart Power Strip v1 (qmi.powerstrip.v1) item file lines ​

note: Autogenerated example. Replace the id (powerstrip) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_powerstrip "CHINGMI Smart Power Strip v1" <status>
Switch power "Power" (G_powerstrip) {channel="miio:basic:powerstrip:power"}
String mode "Mode" (G_powerstrip) {channel="miio:basic:powerstrip:mode"}
Number:Power electric_power "Active Power" (G_powerstrip) {channel="miio:basic:powerstrip:electric_power"}
Number:ElectricPotential voltage "Voltage" (G_powerstrip) {channel="miio:basic:powerstrip:voltage"}
Number:Dimensionless power_factor "Power Factor" (G_powerstrip) {channel="miio:basic:powerstrip:power_factor"}
Number:ElectricCurrent electric_current "Current" (G_powerstrip) {channel="miio:basic:powerstrip:electric_current"}
Number:ElectricCurrent leakage_current "Leakage Current" (G_powerstrip) {channel="miio:basic:powerstrip:leakage_current"}
Number:Temperature temperature "Temperature" (G_powerstrip) {channel="miio:basic:powerstrip:temperature"}

ROIDMI EVE (roidmi.vacuum.r1b) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "ROIDMI EVE" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch mute "Speaker - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time2 "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time2"}
Number:Dimensionless brush_life_level2 "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level2"}
Switch mop "Custom - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Scheduled Cleaning" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number:Area clean_area "Custom - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Switch auto_boost "Custom - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number:Time total_clean_time "Custom - Total Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number:Area total_clean_areas "Custom - Total Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number clean_counts "Custom - Total Cleaning Count" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time clean_time "Custom - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch edge_sweep "Custom - Edge Cleaning" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep"}
Switch led_switch "Custom - Indicator Light Always On" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
Switch lidar_collision "Custom - Lidar Priority" (G_vacuum) {channel="miio:basic:vacuum:lidar_collision"}
Switch station_key "Custom - Dust Station Touch Control" (G_vacuum) {channel="miio:basic:vacuum:station_key"}
Switch station_led "Custom - Dust Station Display" (G_vacuum) {channel="miio:basic:vacuum:station_led"}
String current_audio "Custom - Voice Pack" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
Number station_type "Custom - Dock Type" (G_vacuum) {channel="miio:basic:vacuum:station_type"}
Switch map_memory "Map - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:map_memory"}
Switch use_auto_area "Map - Custom Room Settings" (G_vacuum) {channel="miio:basic:vacuum:use_auto_area"}
Number path_type "Map - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number sweep_mode "Sweep - Cleaning Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}

ROIDMI EVE MAX (roidmi.vacuum.sdj60) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "ROIDMI EVE MAX" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_life_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_life_time"}
Number volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time component_left_time "Parts Cleaning - Left Time" (G_vacuum) {channel="miio:basic:vacuum:component_left_time"}
Number:Dimensionless component_life_level "Parts Cleaning - Life Level" (G_vacuum) {channel="miio:basic:vacuum:component_life_level"}
Number sweep_mode "Sweep - Cleaning Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}
Switch mop "Custom - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Scheduled Cleaning" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number:Area clean_area "Custom - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number rug_avoid "Custom - Carpet Cleaning" (G_vacuum) {channel="miio:basic:vacuum:rug_avoid"}
Switch lidar_collision "Custom - Active Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:lidar_collision"}
Switch auto_boost "Custom - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number clean_counts "Custom - Total Cleaning Count" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time total_clean_time "Custom - Total Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number:Area total_clean_areas "Custom - Total Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number:Time clean_time "Custom - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch station_key "Custom - Dust Station Touch Control" (G_vacuum) {channel="miio:basic:vacuum:station_key"}
Switch station_led "Custom - Dust Station Display" (G_vacuum) {channel="miio:basic:vacuum:station_led"}
Switch led_switch "Custom - Indicator Light Always On" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
String current_audio "Custom - Voice Pack" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
Switch child_lock "Custom - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number path_type "Custom - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number wifi_rssi "Custom - WiFi Signal Strength" (G_vacuum) {channel="miio:basic:vacuum:wifi_rssi"}
Switch forbid_state "Custom - Do Not Disturb Active" (G_vacuum) {channel="miio:basic:vacuum:forbid_state"}
Switch bump_state "Custom - Black Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:bump_state"}

ROIDMI EVE vacuum (roidmi.vacuum.v60) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "ROIDMI EVE vacuum" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch mute "Speaker - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time2 "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time2"}
Number:Dimensionless brush_life_level2 "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level2"}
Switch mop "Custom - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Scheduled Cleaning" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number:Area clean_area "Custom - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Switch auto_boost "Custom - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number:Time total_clean_time "Custom - Total Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number:Area total_clean_areas "Custom - Total Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number clean_counts "Custom - Total Cleaning Count" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time clean_time "Custom - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch edge_sweep "Custom - Edge Cleaning" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep"}
Switch led_switch "Custom - Indicator Light Always On" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
Switch lidar_collision "Custom - Lidar Priority" (G_vacuum) {channel="miio:basic:vacuum:lidar_collision"}
Switch station_key "Custom - Dust Station Touch Control" (G_vacuum) {channel="miio:basic:vacuum:station_key"}
Switch station_led "Custom - Dust Station Display" (G_vacuum) {channel="miio:basic:vacuum:station_led"}
String current_audio "Custom - Voice Pack" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
Number station_type "Custom - Dock Type" (G_vacuum) {channel="miio:basic:vacuum:station_type"}
Switch map_memory "Map - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:map_memory"}
Switch use_auto_area "Map - Custom Room Settings" (G_vacuum) {channel="miio:basic:vacuum:use_auto_area"}
Number path_type "Map - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number sweep_mode "Sweep - Cleaning Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}

ROIDMI EVE CC (roidmi.vacuum.v62) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "ROIDMI EVE CC" <status>
String actions "Robot Cleaner - Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String clean_rooms "Robot Cleaner - Clean Rooms" (G_vacuum) {channel="miio:basic:vacuum:clean_rooms"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
String on "Robot Cleaner - Device Configuration" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number time_zone "Sweep - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String cur_lang "Sweep - Language" (G_vacuum) {channel="miio:basic:vacuum:cur_lang"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless main_brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life_level"}
Number:Time main_brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_left_time"}
Number:Dimensionless side_brush_life_level "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life_level"}
Number:Time side_brush_left_time "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
String multi_prop_vacuum "Sweep - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_vacuum"}
Number cur_map_id "Map - Current Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur_map_id"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}
String multi_prop_dnd "Do Not Disturb - Status Data" (G_vacuum) {channel="miio:basic:vacuum:multi_prop_dnd"}

ROIDMI VACUUM EVE ROOK (roidmi.vacuum.v63) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "ROIDMI VACUUM EVE ROOK" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch mute "Speaker - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time mop_life_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_life_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time scraper_left_time "Main Brush Scraper - Scraper Left Time" (G_vacuum) {channel="miio:basic:vacuum:scraper_left_time"}
Number:Dimensionless scraper_life_level "Main Brush Scraper - Scraper Life Level" (G_vacuum) {channel="miio:basic:vacuum:scraper_life_level"}
Switch mop "Custom - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Scheduled Cleaning" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number:Area clean_area "Custom - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Switch auto_boost "Custom - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number:Time total_clean_time "Custom - Total Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number:Area total_clean_areas "Custom - Total Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number clean_counts "Custom - Total Cleaning Count" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time clean_time "Custom - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch edge_sweep "Custom - Edge Cleaning" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep"}
Switch led_switch "Custom - Indicator Light Always On" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
String current_audio "Custom - Voice Pack" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
Number station_type "Custom - Dock Type" (G_vacuum) {channel="miio:basic:vacuum:station_type"}
Switch use_auto_area "Map - Custom Room Settings" (G_vacuum) {channel="miio:basic:vacuum:use_auto_area"}
Number path_type "Map - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number sweep_mode "Sweep - Cleaning Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}

ROIDMI EVA (roidmi.vacuum.v66) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "ROIDMI EVA" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch mute "Speaker - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time2 "Sensor - Sensor Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time2"}
Number:Dimensionless brush_life_level2 "Sensor - Sensor Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level2"}
Switch mop "Custom - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Scheduled Cleaning" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number:Area clean_area "Custom - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Switch auto_boost "Custom - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number:Time total_clean_time "Custom - Total Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number:Area total_clean_areas "Custom - Total Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number clean_counts "Custom - Total Cleaning Count" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time clean_time "Custom - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch edge_sweep "Custom - Edge Cleaning" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep"}
Switch led_switch "Custom - Indicator Light Always On" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
Switch lidar_collision "Custom - Lidar Priority" (G_vacuum) {channel="miio:basic:vacuum:lidar_collision"}
String current_audio "Custom - Voice Pack" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
Number station_type "Custom - Dock Type" (G_vacuum) {channel="miio:basic:vacuum:station_type"}
Switch explore_build_map "Custom - Building Map" (G_vacuum) {channel="miio:basic:vacuum:explore_build_map"}
String rug_avoid "Custom - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:rug_avoid"}
Switch map_memory "Map - Map Saving" (G_vacuum) {channel="miio:basic:vacuum:map_memory"}
Switch use_auto_area "Map - Custom Room Settings" (G_vacuum) {channel="miio:basic:vacuum:use_auto_area"}
Number path_type "Map - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number sweep_mode "Sweep - Cleaning Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}
Number:Time mop_life_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_life_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number signal "Base Station - Connection" (G_vacuum) {channel="miio:basic:vacuum:signal"}
Switch clear_tank_status "Base Station - Clean Water Tank OK" (G_vacuum) {channel="miio:basic:vacuum:clear_tank_status"}
Switch sewage_tank_status "Base Station - Dirty Water Tank OK" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number work_status "Base Station - Status" (G_vacuum) {channel="miio:basic:vacuum:work_status"}
String version "Base Station - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:version"}
String ap_name "Base Station - Network Name" (G_vacuum) {channel="miio:basic:vacuum:ap_name"}
Number:Time back_clean_freq "Base Station - Mop Washing Interval" (G_vacuum) {channel="miio:basic:vacuum:back_clean_freq"}
String spin_dry_mode "Base Station - Mop Spin Drying" (G_vacuum) {channel="miio:basic:vacuum:spin_dry_mode"}
Number air_time_mode "Base Station - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:air_time_mode"}
Number air_time_mode_slider "Base Station - Mop Drying Time Level" (G_vacuum) {channel="miio:basic:vacuum:air_time_mode_slider"}

One Intelligent switch(WIFI) (090615.switch.switch01) item file lines ​

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "One Intelligent switch(WIFI)" <status>
Switch switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
Switch backlight "Backlight" (G_switch) {channel="miio:basic:switch:backlight"}

Two Intelligent Switch (WIFI) (090615.switch.switch02) item file lines ​

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "Two Intelligent Switch (WIFI)" <status>
Switch switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Switch switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}
Switch all "All Switches" (G_switch) {channel="miio:basic:switch:all"}
Switch backlight "Backlight" (G_switch) {channel="miio:basic:switch:backlight"}

Three Intelligent switch(WIFI) (090615.switch.switch03) item file lines ​

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "Three Intelligent switch(WIFI)" <status>
Switch switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Switch switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
Switch switch3state "Switch 3" (G_switch) {channel="miio:basic:switch:switch3state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}
String switch3name "Switch Name 3" (G_switch) {channel="miio:basic:switch:switch3name"}
Switch all "All Switches" (G_switch) {channel="miio:basic:switch:all"}
Switch backlight "Backlight" (G_switch) {channel="miio:basic:switch:backlight"}

PTX OneKey Switch (WIFI) (090615.switch.xswitch01) item file lines ​

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "PTX OneKey Switch (WIFI)" <status>
Switch switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
Switch backlight "Backlight" (G_switch) {channel="miio:basic:switch:backlight"}

PTX Twokey switch(wifi) (090615.switch.xswitch02) item file lines ​

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "PTX Twokey switch(wifi)" <status>
Switch switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Switch switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}
Switch all "All Switches" (G_switch) {channel="miio:basic:switch:all"}
Switch backlight "Backlight" (G_switch) {channel="miio:basic:switch:backlight"}

PTX ThreeKey Switch (WIFI) (090615.switch.xswitch03) item file lines ​

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "PTX ThreeKey Switch (WIFI)" <status>
Switch switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Switch switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
Switch switch3state "Switch 3" (G_switch) {channel="miio:basic:switch:switch3state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}
String switch3name "Switch Name 3" (G_switch) {channel="miio:basic:switch:switch3name"}
Switch all "All Switches" (G_switch) {channel="miio:basic:switch:all"}
Switch backlight "Backlight" (G_switch) {channel="miio:basic:switch:backlight"}

SCISHARE Smart Capsule Coffee Machine (scishare.coffee.s1102) item file lines ​

note: Autogenerated example. Replace the id (coffee) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_coffee "SCISHARE Smart Capsule Coffee Machine" <status>
Switch power "Power" (G_coffee) {channel="miio:basic:coffee:power"}
Number status "Status" (G_coffee) {channel="miio:basic:coffee:status"}
Number make_espresso "Make Espresso" (G_coffee) {channel="miio:basic:coffee:make_espresso"}
Number make_americano "Make Americano" (G_coffee) {channel="miio:basic:coffee:make_americano"}
Number make_hot_water "Make Hot Water" (G_coffee) {channel="miio:basic:coffee:make_hot_water"}
String control "Control" (G_coffee) {channel="miio:basic:coffee:control"}
Number preheat_mode "Boiler Preheat Mode" (G_coffee) {channel="miio:basic:coffee:preheat_mode"}

Xiaomi Scishare Smart Capsule Coffee Machine (scishare.coffee.s1301) item file lines ​

note: Autogenerated example. Replace the id (coffee) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_coffee "Xiaomi Scishare Smart Capsule Coffee Machine" <status>
Switch power "Power" (G_coffee) {channel="miio:basic:coffee:power"}
Number status "Status" (G_coffee) {channel="miio:basic:coffee:status"}
Number make_espresso "Make Espresso" (G_coffee) {channel="miio:basic:coffee:make_espresso"}
Number make_americano "Make Americano" (G_coffee) {channel="miio:basic:coffee:make_americano"}
Number make_hot_water "Make Hot Water" (G_coffee) {channel="miio:basic:coffee:make_hot_water"}
String control "Control" (G_coffee) {channel="miio:basic:coffee:control"}
Number preheat_mode "Boiler Preheat Mode" (G_coffee) {channel="miio:basic:coffee:preheat_mode"}

TINYMU Smart Toilet (tinymu.toiletlid.v1) item file lines ​

note: Autogenerated example. Replace the id (toiletlid) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_toiletlid "TINYMU Smart Toilet" <status>
Number status "Status" (G_toiletlid) {channel="miio:basic:toiletlid:status"}
Number:Time filter_days_left "Filter Days Left" (G_toiletlid) {channel="miio:basic:toiletlid:filter_days_left"}
Number:Dimensionless filter_life "Filter Remaining" (G_toiletlid) {channel="miio:basic:toiletlid:filter_life"}
Switch deodorization "Deodorization" (G_toiletlid) {channel="miio:basic:toiletlid:deodorization"}

Mi Smart Dishwasher (4 Dining Sets) (viomi.dishwasher.m02) item file lines ​

note: Autogenerated example. Replace the id (dishwasher) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_dishwasher "Mi Smart Dishwasher (4 Dining Sets)" <status>
Switch power "Power" (G_dishwasher) {channel="miio:basic:dishwasher:power"}
Number status "Status" (G_dishwasher) {channel="miio:basic:dishwasher:status"}
Number program "Program" (G_dishwasher) {channel="miio:basic:dishwasher:program"}
Number wash_process "Wash Step" (G_dishwasher) {channel="miio:basic:dishwasher:wash_process"}
Number:Time remaining_time "Remaining Time" (G_dishwasher) {channel="miio:basic:dishwasher:remaining_time"}
Number:Temperature water_temperature "Water Temperature" (G_dishwasher) {channel="miio:basic:dishwasher:water_temperature"}
Switch child_lock "Child Lock" (G_dishwasher) {channel="miio:basic:dishwasher:child_lock"}
String control "Control" (G_dishwasher) {channel="miio:basic:dishwasher:control"}

Viomi sweeper PRO (viomi.vacuum.v3) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi sweeper PRO" <status>
Number vacuumaction "Vacuum action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number:Dimensionless battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Bin / tank type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Time clean_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area clean_area "Clean area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Switch remember_map "Map remembered" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "Has map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number has_newmap "New map available" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning_type"}
Switch repeat_cleaning "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat_cleaning"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time side_brush_hours "Side brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Time main_brush_hours "Main brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Time hypa_hours "Dust compartment filter remaining time" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Time mop_hours "Mop remaining time" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Dimensionless hypa_life "Dust compartment filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Dimensionless mop_life "Mop life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}

Viomi Cleaning Robot V-RVCLM21B (viomi.vacuum.v6) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Cleaning Robot V-RVCLM21B" <status>
Number vacuumaction "Vacuum action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number:Dimensionless battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Bin / tank type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Time clean_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area clean_area "Clean area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Switch remember_map "Map remembered" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "Has map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number has_newmap "New map available" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning_type"}
Switch repeat_cleaning "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat_cleaning"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time side_brush_hours "Side brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Time main_brush_hours "Main brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Time hypa_hours "Dust compartment filter remaining time" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Time mop_hours "Mop remaining time" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Dimensionless hypa_life "Dust compartment filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Dimensionless mop_life "Mop life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}

Mi Robot Vacuum-Mop P (viomi.vacuum.v7) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number:Dimensionless battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Bin / tank type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Time clean_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area clean_area "Clean area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Switch remember_map "Map remembered" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "Has map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number has_newmap "New map available" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning_type"}
Switch repeat_cleaning "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat_cleaning"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time side_brush_hours "Side brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Time main_brush_hours "Main brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Time hypa_hours "Dust compartment filter remaining time" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Time mop_hours "Mop remaining time" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Dimensionless hypa_life "Dust compartment filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Dimensionless mop_life "Mop life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}

Mi Robot Vacuum-Mop P (viomi.vacuum.v8) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number:Dimensionless battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Bin / tank type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Time clean_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area clean_area "Clean area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Switch remember_map "Map remembered" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "Has map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number has_newmap "New map available" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning_type"}
Switch repeat_cleaning "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat_cleaning"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time side_brush_hours "Side brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Time main_brush_hours "Main brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Time hypa_hours "Dust compartment filter remaining time" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Time mop_hours "Mop remaining time" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Dimensionless hypa_life "Dust compartment filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Dimensionless mop_life "Mop life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}

Mi Robot Vacuum-Mop P (viomi.vacuum.v9) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number:Dimensionless battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Bin / tank type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Time clean_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area clean_area "Clean area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Switch remember_map "Map remembered" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "Has map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number has_newmap "New map available" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning_type"}
Switch repeat_cleaning "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat_cleaning"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time side_brush_hours "Side brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Time main_brush_hours "Main brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Time hypa_hours "Dust compartment filter remaining time" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Time mop_hours "Mop remaining time" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Dimensionless hypa_life "Dust compartment filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Dimensionless mop_life "Mop life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}

Viomi Robot Vacuum (viomi.vacuum.v10) (viomi.vacuum.v10) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Robot Vacuum (viomi.vacuum.v10)" <status>
Number vacuumaction "Vacuum action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number:Dimensionless battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Bin / tank type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop pattern" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Time clean_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area clean_area "Clean area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Switch remember_map "Map remembered" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "Has map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number has_newmap "New map available" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning_type"}
Switch repeat_cleaning "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat_cleaning"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Time side_brush_hours "Side brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Time main_brush_hours "Main brush remaining time" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Time hypa_hours "Dust compartment filter remaining time" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Time mop_hours "Mop remaining time" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Dimensionless hypa_life "Dust compartment filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Dimensionless mop_life "Mop life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}

Viomi V-SLAM Robot Vacuum (viomi.vacuum.v11) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi V-SLAM Robot Vacuum" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Number point_x "Point cleaning target X" (G_vacuum) {channel="miio:basic:vacuum:point-x"}
Number point_y "Point cleaning target Y" (G_vacuum) {channel="miio:basic:vacuum:point-y"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}

Viomi Cleaning Robot X2 (viomi.vacuum.v12) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Cleaning Robot X2" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String room_clean_queue "Clean rooms in order" (G_vacuum) {channel="miio:basic:vacuum:room-clean-queue"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi V3 (viomi.vacuum.v13) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi V3" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String room_clean_queue "Clean rooms in order" (G_vacuum) {channel="miio:basic:vacuum:room-clean-queue"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI Alpha 2 Pro (viomi.vacuum.v15) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI Alpha 2 Pro" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi Robot Vacuum-Mop JC (viomi.vacuum.v17) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Robot Vacuum-Mop JC" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi S9 (viomi.vacuum.v18) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi S9" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi SE (viomi.vacuum.v19) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi SE" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String room_clean_queue "Clean rooms in order" (G_vacuum) {channel="miio:basic:vacuum:room-clean-queue"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI FIERCE-UV (viomi.vacuum.v20) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI FIERCE-UV" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI ALPHA-UV (viomi.vacuum.v21) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI ALPHA-UV" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI Alpha 2 Pro (viomi.vacuum.v22) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI Alpha 2 Pro" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI V3 Max (viomi.vacuum.v23) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI V3 Max" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI 5G IOT LingLi 2 (viomi.vacuum.v24) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI 5G IOT LingLi 2" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI X3 (viomi.vacuum.v25) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI X3" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String room_clean_queue "Clean rooms in order" (G_vacuum) {channel="miio:basic:vacuum:room-clean-queue"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI Alpha 2 Plus (viomi.vacuum.v27) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI Alpha 2 Plus" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI Eagle (viomi.vacuum.v29) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI Eagle" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi V2 Max (viomi.vacuum.v35) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi V2 Max" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String room_clean_queue "Clean rooms in order" (G_vacuum) {channel="miio:basic:vacuum:room-clean-queue"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi V5 (viomi.vacuum.v36) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi V5" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number cleaning_scope "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:cleaning-scope"}
Number box_type "Installed box" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch carpet_press "Carpet boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
Number cleantimes "Cleaning passes" (G_vacuum) {channel="miio:basic:vacuum:cleantimes"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Switch clean_map_state "Map ready to save" (G_vacuum) {channel="miio:basic:vacuum:clean-map-state"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi Alpha Lite (viomi.vacuum.v37) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Alpha Lite" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi V5 Pro (viomi.vacuum.v38) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi V5 Pro" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number cleaning_scope "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:cleaning-scope"}
Number box_type "Installed box" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number cleantimes "Cleaning passes" (G_vacuum) {channel="miio:basic:vacuum:cleantimes"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
String cur_voice "Voice pack" (G_vacuum) {channel="miio:basic:vacuum:cur-voice"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi Alpha 2 Pro(WH) (viomi.vacuum.v40) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Alpha 2 Pro(WH)" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number cleaning_scope "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:cleaning-scope"}
Number box_type "Installed box" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number cleantimes "Cleaning passes" (G_vacuum) {channel="miio:basic:vacuum:cleantimes"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
String cur_voice "Voice pack" (G_vacuum) {channel="miio:basic:vacuum:cur-voice"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi Alpha 2 Max (viomi.vacuum.v41) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Alpha 2 Max" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number swept_area_type "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:swept-area-type"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

VIOMI Auto Cleaning Alpha 3 (viomi.vacuum.v45) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "VIOMI Auto Cleaning Alpha 3" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String spot_clean "Clean spot" (G_vacuum) {channel="miio:basic:vacuum:spot-clean"}
String set_zone "Set cleaning zone" (G_vacuum) {channel="miio:basic:vacuum:set-zone"}
Number cleaning_plan "Cleaning plan" (G_vacuum) {channel="miio:basic:vacuum:cleaning-plan"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Switch carpet_booster "Carpet boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-booster"}
Switch carpet_avoid "Carpet avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet-avoid"}
Switch carpet_show "Show carpets on map" (G_vacuum) {channel="miio:basic:vacuum:carpet-show"}
Switch vibration_mop "Vibration mopping" (G_vacuum) {channel="miio:basic:vacuum:vibration-mop"}
Number vibration_level "Vibration level" (G_vacuum) {channel="miio:basic:vacuum:vibration-level"}
Switch dnd_pause_drying "Pause mop drying in Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-pause-drying"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Number build_map "Mapping state" (G_vacuum) {channel="miio:basic:vacuum:build-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
Switch stop_map_upload "Stop map upload" (G_vacuum) {channel="miio:basic:vacuum:stop-map-upload"}
String order_count "Cleaning schedules" (G_vacuum) {channel="miio:basic:vacuum:order-count"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch ai_recognize "AI recognition" (G_vacuum) {channel="miio:basic:vacuum:ai-recognize"}
String multi_prop_vacuum "Settings list" (G_vacuum) {channel="miio:basic:vacuum:multi-prop-vacuum"}

Viomi Alpha 3 Pro (viomi.vacuum.v49) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Alpha 3 Pro" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String spot_clean "Clean spot" (G_vacuum) {channel="miio:basic:vacuum:spot-clean"}
String set_zone "Set cleaning zone" (G_vacuum) {channel="miio:basic:vacuum:set-zone"}
Number cleaning_plan "Cleaning plan" (G_vacuum) {channel="miio:basic:vacuum:cleaning-plan"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Switch carpet_booster "Carpet boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-booster"}
Switch carpet_avoid "Carpet avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet-avoid"}
Switch carpet_show "Show carpets on map" (G_vacuum) {channel="miio:basic:vacuum:carpet-show"}
Switch sweep_avoid "Carpet avoidance when vacuuming" (G_vacuum) {channel="miio:basic:vacuum:sweep-avoid"}
Switch mop_avoid "Carpet avoidance when mopping" (G_vacuum) {channel="miio:basic:vacuum:mop-avoid"}
Switch vibration_mop "Vibration mopping" (G_vacuum) {channel="miio:basic:vacuum:vibration-mop"}
Number vibration_level "Vibration level" (G_vacuum) {channel="miio:basic:vacuum:vibration-level"}
Switch electrolysis "Water electrolysis" (G_vacuum) {channel="miio:basic:vacuum:electrolysis"}
Switch dnd_pause_drying "Pause mop drying in Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-pause-drying"}
Switch auto_dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:auto-dust-collection"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Number build_map "Mapping state" (G_vacuum) {channel="miio:basic:vacuum:build-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String order_count "Cleaning schedules" (G_vacuum) {channel="miio:basic:vacuum:order-count"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch ai_recognize "AI recognition" (G_vacuum) {channel="miio:basic:vacuum:ai-recognize"}
String multi_prop_vacuum "Settings list" (G_vacuum) {channel="miio:basic:vacuum:multi-prop-vacuum"}

Viomi Alpha 2 Lite (viomi.vacuum.v53) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Alpha 2 Lite" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number cleaning_scope "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:cleaning-scope"}
Number box_type "Installed box" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Switch mute "Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch carpet_press "Carpet boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Switch fast_mapping_button "Quick mapping" (G_vacuum) {channel="miio:basic:vacuum:fast-mapping-button"}
Number fast_mapping_status "Quick mapping status" (G_vacuum) {channel="miio:basic:vacuum:fast-mapping-status"}
Number cleantimes "Cleaning passes" (G_vacuum) {channel="miio:basic:vacuum:cleantimes"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
String cur_voice "Voice pack" (G_vacuum) {channel="miio:basic:vacuum:cur-voice"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi V3 Absolut (viomi.vacuum.v56) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi V3 Absolut" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number cleaning_scope "Cleaning scope" (G_vacuum) {channel="miio:basic:vacuum:cleaning-scope"}
Number box_type "Installed box" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Switch mute "Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Remember map" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Switch carpet_press "Carpet boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
Switch dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Switch fast_mapping_button "Quick mapping" (G_vacuum) {channel="miio:basic:vacuum:fast-mapping-button"}
Number fast_mapping_status "Quick mapping status" (G_vacuum) {channel="miio:basic:vacuum:fast-mapping-status"}
Number cleantimes "Cleaning passes" (G_vacuum) {channel="miio:basic:vacuum:cleantimes"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number last_clean_start "Last clean start" (G_vacuum) {channel="miio:basic:vacuum:last-clean-start"}
Number:Time last_clean_time "Last clean duration" (G_vacuum) {channel="miio:basic:vacuum:last-clean-time"}
Number:Area last_clean_area "Last clean area" (G_vacuum) {channel="miio:basic:vacuum:last-clean-area"}
Number last_clean_mode "Last clean mode" (G_vacuum) {channel="miio:basic:vacuum:last-clean-mode"}
Number last_clean_type "Last clean type" (G_vacuum) {channel="miio:basic:vacuum:last-clean-type"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Switch has_map "Map available" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number last_update_time "Map updated" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
String cur_voice "Voice pack" (G_vacuum) {channel="miio:basic:vacuum:cur-voice"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String zone_points "Zone cleaning corners" (G_vacuum) {channel="miio:basic:vacuum:zone-points"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time dnd_timezone "Do not disturb time zone offset" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
String orderdata "Cleaning schedule" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}

Viomi Master 10 Max (viomi.vacuum.v60) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Viomi Master 10 Max" <status>
String vacuumaction "Actions" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
String room_clean "Clean rooms" (G_vacuum) {channel="miio:basic:vacuum:room-clean"}
String spot_clean "Clean spot" (G_vacuum) {channel="miio:basic:vacuum:spot-clean"}
String set_zone "Set cleaning zone" (G_vacuum) {channel="miio:basic:vacuum:set-zone"}
Number cleaning_plan "Cleaning plan" (G_vacuum) {channel="miio:basic:vacuum:cleaning-plan"}
Number status "Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Error" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number cleaning_type "Cleaning type" (G_vacuum) {channel="miio:basic:vacuum:cleaning-type"}
Number cleaning_mode "Cleaning mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number suction_grade "Suction power" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Water level" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number mop_route "Mopping pattern" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Switch repeat_state "Repeat cleaning" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Number box_type "Installed modules" (G_vacuum) {channel="miio:basic:vacuum:box-type"}
Switch mop_installed "Mop installed" (G_vacuum) {channel="miio:basic:vacuum:mop-installed"}
Number:Time clean_time "Cleaning time" (G_vacuum) {channel="miio:basic:vacuum:clean-time"}
Number:Area clean_area "Cleaned area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number volume "Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number manual_control "Manual control" (G_vacuum) {channel="miio:basic:vacuum:manual-control"}
Switch carpet_booster "Carpet boost" (G_vacuum) {channel="miio:basic:vacuum:carpet-booster"}
Switch carpet_avoid "Carpet avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet-avoid"}
Switch carpet_show "Show carpets on map" (G_vacuum) {channel="miio:basic:vacuum:carpet-show"}
Switch sweep_avoid "Carpet avoidance when vacuuming" (G_vacuum) {channel="miio:basic:vacuum:sweep-avoid"}
Switch mop_avoid "Carpet avoidance when mopping" (G_vacuum) {channel="miio:basic:vacuum:mop-avoid"}
Switch vibration_mop "Vibration mopping" (G_vacuum) {channel="miio:basic:vacuum:vibration-mop"}
Number vibration_level "Vibration level" (G_vacuum) {channel="miio:basic:vacuum:vibration-level"}
Switch dnd_pause_drying "Pause mop drying in Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-pause-drying"}
Switch auto_dust_collection "Auto dust collection" (G_vacuum) {channel="miio:basic:vacuum:auto-dust-collection"}
Switch back_wash "Return to wash the mop by area" (G_vacuum) {channel="miio:basic:vacuum:back-wash"}
Number back_wash_area "Mop wash interval area" (G_vacuum) {channel="miio:basic:vacuum:back-wash-area"}
Switch auto_dry_mop "Automatic mop drying" (G_vacuum) {channel="miio:basic:vacuum:auto-dry-mop"}
Number dry_time "Mop drying time" (G_vacuum) {channel="miio:basic:vacuum:dry-time"}
Number dust_frequency "Dust collection frequency" (G_vacuum) {channel="miio:basic:vacuum:dust-frequency"}
Switch mop_edge "Automatic mop extend" (G_vacuum) {channel="miio:basic:vacuum:mop-edge"}
Number mop_edge_frequency "Mop extend frequency" (G_vacuum) {channel="miio:basic:vacuum:mop-edge-frequency"}
Switch clean_brush "Brush self-cleaning" (G_vacuum) {channel="miio:basic:vacuum:clean-brush"}
Number clean_brush_frequency "Brush self-cleaning frequency" (G_vacuum) {channel="miio:basic:vacuum:clean-brush-frequency"}
Switch child_lock "Child lock" (G_vacuum) {channel="miio:basic:vacuum:child-lock"}
Number:Dimensionless side_brush_life "Side brush life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Side brush time left" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Main brush life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Main brush time left" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Dust box filter life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Dust box filter time left" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Mop cloth life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Mop cloth time left" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number map_num "Saved maps" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number cur_map_id "Current map id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
Number build_map "Mapping state" (G_vacuum) {channel="miio:basic:vacuum:build-map"}
Switch has_newmap "New map" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
String target_point "Point cleaning target" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
String order_count "Cleaning schedules" (G_vacuum) {channel="miio:basic:vacuum:order-count"}
Switch dnd_enable "Do not disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Do not disturb start hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Do not disturb start minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Do not disturb end hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Do not disturb end minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number:Time time_zone "Time zone offset" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String cur_lang "Voice language" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Switch ai_recognize "AI recognition" (G_vacuum) {channel="miio:basic:vacuum:ai-recognize"}
String multi_prop_vacuum "Settings list" (G_vacuum) {channel="miio:basic:vacuum:multi-prop-vacuum"}

VIOMI Internet Electric Water Heater 1A (60L) (viomi.waterheater.e1) item file lines ​

note: Autogenerated example. Replace the id (waterheater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterheater "VIOMI Internet Electric Water Heater 1A (60L)" <status>
Switch washStatus "Power" (G_waterheater) {channel="miio:basic:waterheater:washStatus"}
Number velocity "Water Flow" (G_waterheater) {channel="miio:basic:waterheater:velocity"}
Number:Temperature waterTemp "Water Temperature" (G_waterheater) {channel="miio:basic:waterheater:waterTemp"}
Number:Temperature targetTemp "Target Temperature" (G_waterheater) {channel="miio:basic:waterheater:targetTemp"}
Number errStatus "Error Code" (G_waterheater) {channel="miio:basic:waterheater:errStatus"}
Number:Dimensionless hotWater "Hot Water" (G_waterheater) {channel="miio:basic:waterheater:hotWater"}
Switch needClean "Cleaning Needed" (G_waterheater) {channel="miio:basic:waterheater:needClean"}
String cleanReset "Reset Cleaning Reminder" (G_waterheater) {channel="miio:basic:waterheater:cleanReset"}
Number modeType "Mode" (G_waterheater) {channel="miio:basic:waterheater:modeType"}
Number appointStart "Booking Start Hour" (G_waterheater) {channel="miio:basic:waterheater:appointStart"}
Number appointEnd "Booking End Hour" (G_waterheater) {channel="miio:basic:waterheater:appointEnd"}

VIOMI Internet electric water heater 50L(Premium Version) (viomi.waterheater.e4) item file lines ​

note: Autogenerated example. Replace the id (waterheater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterheater "VIOMI Internet electric water heater 50L(Premium Version)" <status>
Switch washStatus "Power" (G_waterheater) {channel="miio:basic:waterheater:washStatus"}
Number velocity "Water Flow" (G_waterheater) {channel="miio:basic:waterheater:velocity"}
Number:Temperature waterTemp "Water Temperature" (G_waterheater) {channel="miio:basic:waterheater:waterTemp"}
Number:Temperature targetTemp "Target Temperature" (G_waterheater) {channel="miio:basic:waterheater:targetTemp"}
Number errStatus "Error Code" (G_waterheater) {channel="miio:basic:waterheater:errStatus"}
Number:Dimensionless hotWater "Hot Water" (G_waterheater) {channel="miio:basic:waterheater:hotWater"}
Switch needClean "Cleaning Needed" (G_waterheater) {channel="miio:basic:waterheater:needClean"}
String cleanReset "Reset Cleaning Reminder" (G_waterheater) {channel="miio:basic:waterheater:cleanReset"}
Number modeType "Mode" (G_waterheater) {channel="miio:basic:waterheater:modeType"}
Number appointStart "Booking Start Hour" (G_waterheater) {channel="miio:basic:waterheater:appointStart"}
Number appointEnd "Booking End Hour" (G_waterheater) {channel="miio:basic:waterheater:appointEnd"}

Mi Inverter Air Conditioner (1.5HP) (xiaomi.aircondition.ma1) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Inverter Air Conditioner (1.5HP)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) (xiaomi.aircondition.ma2) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Vertical Air Conditioner (2HP) (xiaomi.aircondition.ma4) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Vertical Air Conditioner (2HP)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma5) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) (xiaomi.aircondition.ma6) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma9) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc1) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc2) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc4) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc5) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc6) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc7) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc8) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc9) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c10) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c11) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh1) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh2) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mh3) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt1) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt2) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt3) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt4) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt5) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt7) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt8) item file lines ​

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimensionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

Xiaomi Smart Air Purifier 4 Compact (xiaomi.airp.cpa4) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4 Compact" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Air Purifier - Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number motor_speed_rpm "Custom Service - Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number country_code "Custom Service - Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number favorite_level "Custom Service - Favorite Level" (G_airp) {channel="miio:basic:airp:favorite_level"}

Mijia Smart Air Purifier MAX (xiaomi.airp.mb6) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Mijia Smart Air Purifier MAX" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch uv "UV Light" (G_airp) {channel="miio:basic:airp:uv"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number air_quality "Air Quality" (G_airp) {channel="miio:basic:airp:air_quality"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Density pm10_density "PM10 Density" (G_airp) {channel="miio:basic:airp:pm10_density"}
Number hcho_density "Formaldehyde Density" (G_airp) {channel="miio:basic:airp:hcho_density"}
Number:Density pm1 "PM1 Density" (G_airp) {channel="miio:basic:airp:pm1"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_left_time "Filter Remaining Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch screen_on "Screen" (G_airp) {channel="miio:basic:airp:screen_on"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number motor_set_speed "Motor Target Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}

Xiaomi Smart Air Purifier Elite (xiaomi.airp.meb1) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier Elite" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch plasma "Plasma Ionizer" (G_airp) {channel="miio:basic:airp:plasma"}
Switch uv "UV Light" (G_airp) {channel="miio:basic:airp:uv"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Density pm10_density "PM10 Density" (G_airp) {channel="miio:basic:airp:pm10_density"}
Number air_quality "Air Quality" (G_airp) {channel="miio:basic:airp:air_quality"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}

Mijia Smart Air Purifier Elite (xiaomi.airp.meb2) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Mijia Smart Air Purifier Elite" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch plasma "Plasma Ionizer" (G_airp) {channel="miio:basic:airp:plasma"}
Switch uv "UV Light" (G_airp) {channel="miio:basic:airp:uv"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Density pm10_density "PM10 Density" (G_airp) {channel="miio:basic:airp:pm10_density"}
Number air_quality "Air Quality" (G_airp) {channel="miio:basic:airp:air_quality"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}

Xiaomi Smart Multifunctional Rice Cooker (xiaomi.cooker.cmk7) item file lines ​

note: Autogenerated example. Replace the id (cooker) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_cooker "Xiaomi Smart Multifunctional Rice Cooker" <status>
Number status "Status" (G_cooker) {channel="miio:basic:cooker:status"}
Number fault "Fault" (G_cooker) {channel="miio:basic:cooker:fault"}
Number cook_mode "Cook Mode" (G_cooker) {channel="miio:basic:cooker:cook_mode"}
Number:Time remaining_time "Remaining Time" (G_cooker) {channel="miio:basic:cooker:remaining_time"}
Number:Time cook_time "Cooking Time" (G_cooker) {channel="miio:basic:cooker:cook_time"}
Number:Time schedule_remaining_time "Schedule Remaining Time" (G_cooker) {channel="miio:basic:cooker:schedule_remaining_time"}
Number:Time keep_warm_time "Keep Warm Time" (G_cooker) {channel="miio:basic:cooker:keep_warm_time"}
Number texture "Texture" (G_cooker) {channel="miio:basic:cooker:texture"}
String control "Control" (G_cooker) {channel="miio:basic:cooker:control"}

Xiaomi Smart Inverter Dehumidifier (xiaomi.derh.30kh) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Xiaomi Smart Inverter Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Switch dry_after_off "Dry & Turn-Off" (G_derh) {channel="miio:basic:derh:dry_after_off"}
Number:Time dry_left_time "Drying Time Left" (G_derh) {channel="miio:basic:derh:dry_left_time"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch led "Display" (G_derh) {channel="miio:basic:derh:led"}
Number led_brightness "Display Brightness" (G_derh) {channel="miio:basic:derh:led_brightness"}
Switch delay "Turn-Off Delay" (G_derh) {channel="miio:basic:derh:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_derh) {channel="miio:basic:derh:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_derh) {channel="miio:basic:derh:delay_remain_time"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch plasma "Plasma" (G_derh) {channel="miio:basic:derh:plasma"}
String actions "Actions" (G_derh) {channel="miio:basic:derh:actions"}

Xiaomi Smart Inverter Dehumidifier 30L (xiaomi.derh.30l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Xiaomi Smart Inverter Dehumidifier 30L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Switch dry_after_off "Dry & Turn-Off" (G_derh) {channel="miio:basic:derh:dry_after_off"}
Number:Time dry_left_time "Drying Time Left" (G_derh) {channel="miio:basic:derh:dry_left_time"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch led "Display" (G_derh) {channel="miio:basic:derh:led"}
Number led_brightness "Display Brightness" (G_derh) {channel="miio:basic:derh:led_brightness"}
Switch delay "Turn-Off Delay" (G_derh) {channel="miio:basic:derh:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_derh) {channel="miio:basic:derh:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_derh) {channel="miio:basic:derh:delay_remain_time"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch plasma "Plasma" (G_derh) {channel="miio:basic:derh:plasma"}
String actions "Actions" (G_derh) {channel="miio:basic:derh:actions"}

Mijia Smart Inverter Purifying Dehumidifier Max (xiaomi.derh.60l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Mijia Smart Inverter Purifying Dehumidifier Max" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number fan_level "Fan Level" (G_derh) {channel="miio:basic:derh:fan_level"}
Switch dry_after_off "Dry & Turn-Off" (G_derh) {channel="miio:basic:derh:dry_after_off"}
Number:Time dry_left_time "Drying Time Left" (G_derh) {channel="miio:basic:derh:dry_left_time"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Switch horizontal_swing "Oscillation" (G_derh) {channel="miio:basic:derh:horizontal_swing"}
Switch plasma "Plasma" (G_derh) {channel="miio:basic:derh:plasma"}
Switch uv "UV-C Sterilization" (G_derh) {channel="miio:basic:derh:uv"}
Number status "Status" (G_derh) {channel="miio:basic:derh:status"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Number:Density pm25 "PM2.5" (G_derh) {channel="miio:basic:derh:pm25"}
Number:Density pm10 "PM10" (G_derh) {channel="miio:basic:derh:pm10"}
Switch led "Display" (G_derh) {channel="miio:basic:derh:led"}
Number led_brightness "Display Brightness" (G_derh) {channel="miio:basic:derh:led_brightness"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch delay "Turn-Off Delay" (G_derh) {channel="miio:basic:derh:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_derh) {channel="miio:basic:derh:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_derh) {channel="miio:basic:derh:delay_remain_time"}
Number:Dimensionless filter_life_level "Filter Life" (G_derh) {channel="miio:basic:derh:filter_life_level"}
Number:Time filter_left_time "Filter Time Left" (G_derh) {channel="miio:basic:derh:filter_left_time"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Number drainage "Continuous Drainage" (G_derh) {channel="miio:basic:derh:drainage"}
Number:Dimensionless water_target "Full Water Level" (G_derh) {channel="miio:basic:derh:water_target"}
String actions "Actions" (G_derh) {channel="miio:basic:derh:actions"}

Mi Smart Standing Fan 2 Lite (xiaomi.fan.2lite) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Standing Fan 2 Lite" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Mijia Smart Standing Fan Pro (xiaomi.fan.p43) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mijia Smart Standing Fan Pro" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number power_supply "Power Supply" (G_fan) {channel="miio:basic:fan:power_supply"}

Xiaomi Smart Tower Fan 2 (xiaomi.fan.p45) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Xiaomi Smart Tower Fan 2" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Mijia Smart Desktop Air Circulation Fan (xiaomi.fan.p69) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mijia Smart Desktop Air Circulation Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch vertical_swing "Vertical Oscillation" (G_fan) {channel="miio:basic:fan:vertical_swing"}
Number:Angle vertical_angle "Vertical Oscillation Angle" (G_fan) {channel="miio:basic:fan:vertical_angle"}
String move_vertical "Move Direction Vertical" (G_fan) {channel="miio:basic:fan:move_vertical"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Xiaomi Smart Desktop Air Circulation Fan (xiaomi.fan.p70) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Xiaomi Smart Desktop Air Circulation Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch vertical_swing "Vertical Oscillation" (G_fan) {channel="miio:basic:fan:vertical_swing"}
Number:Angle vertical_angle "Vertical Oscillation Angle" (G_fan) {channel="miio:basic:fan:vertical_angle"}
String move_vertical "Move Direction Vertical" (G_fan) {channel="miio:basic:fan:move_vertical"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Xiaomi Smart Standing Air Circulation Fan (xiaomi.fan.p76) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Xiaomi Smart Standing Air Circulation Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch vertical_swing "Vertical Oscillation" (G_fan) {channel="miio:basic:fan:vertical_swing"}
Number:Angle vertical_angle "Vertical Oscillation Angle" (G_fan) {channel="miio:basic:fan:vertical_angle"}
String move_vertical "Move Direction Vertical" (G_fan) {channel="miio:basic:fan:move_vertical"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Mijia Smart Standing Fan Pro Slim (xiaomi.fan.p85) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mijia Smart Standing Fan Pro Slim" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Indicator Light" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Mijia Smart Air Circulation Fan Pro (xiaomi.fan.p90) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mijia Smart Air Circulation Fan Pro" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Natural Wind Preset" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Switch horizontal_symmetrical "Symmetrical Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_symmetrical"}
Number:Angle horizontal_left_angle "Oscillation Left Angle" (G_fan) {channel="miio:basic:fan:horizontal_left_angle"}
Number:Angle horizontal_right_angle "Oscillation Right Angle" (G_fan) {channel="miio:basic:fan:horizontal_right_angle"}
Switch vertical_swing "Vertical Oscillation" (G_fan) {channel="miio:basic:fan:vertical_swing"}
Switch vertical_symmetrical "Symmetrical Vertical Oscillation" (G_fan) {channel="miio:basic:fan:vertical_symmetrical"}
Number:Angle vertical_up_angle "Oscillation Up Angle" (G_fan) {channel="miio:basic:fan:vertical_up_angle"}
Number:Angle vertical_down_angle "Oscillation Down Angle" (G_fan) {channel="miio:basic:fan:vertical_down_angle"}
Switch off_to_center "Back to Center at Power-Off" (G_fan) {channel="miio:basic:fan:off_to_center"}
Switch off_delay "Power-Off Timer Enabled" (G_fan) {channel="miio:basic:fan:off_delay"}
Number:Time off_delay_time "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Number:Time off_delay_remaining "Power-Off Timer Remaining" (G_fan) {channel="miio:basic:fan:off_delay_remaining"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Switch led "Screen" (G_fan) {channel="miio:basic:fan:led"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number fault "Device Fault" (G_fan) {channel="miio:basic:fan:fault"}

Xiaomi Smart Pet Food Feeder 2 (xiaomi.feeder.iv2001) item file lines ​

note: Autogenerated example. Replace the id (feeder) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_feeder "Xiaomi Smart Pet Food Feeder 2" <status>
Number fault "Fault" (G_feeder) {channel="miio:basic:feeder:fault"}
Number food_level "Food Level" (G_feeder) {channel="miio:basic:feeder:food_level"}
Number dispense_food "Dispense Food" (G_feeder) {channel="miio:basic:feeder:dispense_food"}
Switch food_jammed "Food Jammed" (G_feeder) {channel="miio:basic:feeder:food_jammed"}
Switch bowl_error "Food Bowl Error" (G_feeder) {channel="miio:basic:feeder:bowl_error"}
Switch bowl_empty "Food Bowl Empty" (G_feeder) {channel="miio:basic:feeder:bowl_empty"}
Switch bowl_full "Food Bowl Full" (G_feeder) {channel="miio:basic:feeder:bowl_full"}
Number food_eaten_today "Food Eaten Today" (G_feeder) {channel="miio:basic:feeder:food_eaten_today"}
Number dispensing "Dispensing" (G_feeder) {channel="miio:basic:feeder:dispensing"}
Switch child_lock "Child Lock" (G_feeder) {channel="miio:basic:feeder:child_lock"}
Switch auto_screen_off "Auto Screen Off" (G_feeder) {channel="miio:basic:feeder:auto_screen_off"}
String schedule "Feeding Schedule" (G_feeder) {channel="miio:basic:feeder:schedule"}
Switch schedule_progress_display "Display Schedule Progress" (G_feeder) {channel="miio:basic:feeder:schedule_progress_display"}
Switch dispensing_correction "Dispensing Error Correction" (G_feeder) {channel="miio:basic:feeder:dispensing_correction"}
Switch spillage_prevention "Food Bowl Spillage Prevention" (G_feeder) {channel="miio:basic:feeder:spillage_prevention"}
Number:Dimensionless schedule_progress "Schedule Progress" (G_feeder) {channel="miio:basic:feeder:schedule_progress"}
Number screen_display "Screen Display" (G_feeder) {channel="miio:basic:feeder:screen_display"}
Number:Dimensionless desiccant_left_level "Desiccant Left Level" (G_feeder) {channel="miio:basic:feeder:desiccant_left_level"}

Mijia Smart Pet Food Feeder 2 (xiaomi.feeder.pi2001) item file lines ​

note: Autogenerated example. Replace the id (feeder) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_feeder "Mijia Smart Pet Food Feeder 2" <status>
Number fault "Fault" (G_feeder) {channel="miio:basic:feeder:fault"}
Number food_level "Food Level" (G_feeder) {channel="miio:basic:feeder:food_level"}
Number dispense_food "Dispense Food" (G_feeder) {channel="miio:basic:feeder:dispense_food"}
Switch food_jammed "Food Jammed" (G_feeder) {channel="miio:basic:feeder:food_jammed"}
Switch bowl_error "Food Bowl Error" (G_feeder) {channel="miio:basic:feeder:bowl_error"}
Switch bowl_empty "Food Bowl Empty" (G_feeder) {channel="miio:basic:feeder:bowl_empty"}
Switch bowl_full "Food Bowl Full" (G_feeder) {channel="miio:basic:feeder:bowl_full"}
Number food_eaten_today "Food Eaten Today" (G_feeder) {channel="miio:basic:feeder:food_eaten_today"}
Number dispensing "Dispensing" (G_feeder) {channel="miio:basic:feeder:dispensing"}
Switch child_lock "Child Lock" (G_feeder) {channel="miio:basic:feeder:child_lock"}
Switch auto_screen_off "Auto Screen Off" (G_feeder) {channel="miio:basic:feeder:auto_screen_off"}
String schedule "Feeding Schedule" (G_feeder) {channel="miio:basic:feeder:schedule"}
Switch schedule_progress_display "Display Schedule Progress" (G_feeder) {channel="miio:basic:feeder:schedule_progress_display"}
Switch dispensing_correction "Dispensing Error Correction" (G_feeder) {channel="miio:basic:feeder:dispensing_correction"}
Switch spillage_prevention "Food Bowl Spillage Prevention" (G_feeder) {channel="miio:basic:feeder:spillage_prevention"}
Number:Dimensionless schedule_progress "Schedule Progress" (G_feeder) {channel="miio:basic:feeder:schedule_progress"}
Number screen_display "Screen Display" (G_feeder) {channel="miio:basic:feeder:screen_display"}
Number:Dimensionless desiccant_left_level "Desiccant Left Level" (G_feeder) {channel="miio:basic:feeder:desiccant_left_level"}

Mijia Smart Dehumidifier 13L (xiaomi.derh.13l) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Mijia Smart Dehumidifier 13L" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Display" (G_derh) {channel="miio:basic:derh:led"}
Number led_brightness "Display Brightness" (G_derh) {channel="miio:basic:derh:led_brightness"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch dry_after_off "Dry & Turn-Off" (G_derh) {channel="miio:basic:derh:dry_after_off"}
Number:Time dry_left_time "Drying Time Left" (G_derh) {channel="miio:basic:derh:dry_left_time"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch delay "Turn-Off Delay" (G_derh) {channel="miio:basic:derh:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_derh) {channel="miio:basic:derh:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_derh) {channel="miio:basic:derh:delay_remain_time"}
String actions "Actions" (G_derh) {channel="miio:basic:derh:actions"}

Xiaomi Smart Dehumidifier Lite (xiaomi.derh.lite) item file lines ​

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_derh "Xiaomi Smart Dehumidifier Lite" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
Number fault "Device Fault" (G_derh) {channel="miio:basic:derh:fault"}
Number mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_derh) {channel="miio:basic:derh:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch buzzer "Notification Sound" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "Display" (G_derh) {channel="miio:basic:derh:led"}
Number led_brightness "Display Brightness" (G_derh) {channel="miio:basic:derh:led_brightness"}
Switch child_lock "Child Lock" (G_derh) {channel="miio:basic:derh:child_lock"}
Switch dry_after_off "Dry & Turn-Off" (G_derh) {channel="miio:basic:derh:dry_after_off"}
Number:Time dry_left_time "Drying Time Left" (G_derh) {channel="miio:basic:derh:dry_left_time"}
Switch defrost "Defrosting" (G_derh) {channel="miio:basic:derh:defrost"}
Switch delay "Turn-Off Delay" (G_derh) {channel="miio:basic:derh:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_derh) {channel="miio:basic:derh:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_derh) {channel="miio:basic:derh:delay_remain_time"}
String actions "Actions" (G_derh) {channel="miio:basic:derh:actions"}

Xiaomi Smart Evaporative Humidifier (xiaomi.humidifier.3lite) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Xiaomi Smart Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Switch dry "Dry & Turn-Off" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time dry_left_time "Drying Time Left" (G_humidifier) {channel="miio:basic:humidifier:dry_left_time"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless filter_life_level "Filter Life" (G_humidifier) {channel="miio:basic:humidifier:filter_life_level"}
Switch led "Display" (G_humidifier) {channel="miio:basic:humidifier:led"}
Number led_brightness "Display Brightness" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}
Switch delay "Turn-Off Delay" (G_humidifier) {channel="miio:basic:humidifier:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_humidifier) {channel="miio:basic:humidifier:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_humidifier) {channel="miio:basic:humidifier:delay_remain_time"}
Switch clean "Start Cleaning" (G_humidifier) {channel="miio:basic:humidifier:clean"}
Number:Time clean_time_left "Cleaning Time Left" (G_humidifier) {channel="miio:basic:humidifier:clean_time_left"}
String actions "Actions" (G_humidifier) {channel="miio:basic:humidifier:actions"}

Mijia Mist-Free Humidifier 3 400mL/h (xiaomi.humidifier.4lite) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mijia Mist-Free Humidifier 3 400mL/h" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Time dry_left_time "Drying Time Left" (G_humidifier) {channel="miio:basic:humidifier:dry_left_time"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless filter_life_level "Filter Life" (G_humidifier) {channel="miio:basic:humidifier:filter_life_level"}
Switch led "Display" (G_humidifier) {channel="miio:basic:humidifier:led"}
Number led_brightness "Display Brightness" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}
Switch delay "Turn-Off Delay" (G_humidifier) {channel="miio:basic:humidifier:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_humidifier) {channel="miio:basic:humidifier:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_humidifier) {channel="miio:basic:humidifier:delay_remain_time"}
Number self_clean "Self-Cleaning" (G_humidifier) {channel="miio:basic:humidifier:self_clean"}
Number:Time clean_time_left "Self-Cleaning Time Left" (G_humidifier) {channel="miio:basic:humidifier:clean_time_left"}
Number filter_clean "Filter Cleaning" (G_humidifier) {channel="miio:basic:humidifier:filter_clean"}
String actions "Actions" (G_humidifier) {channel="miio:basic:humidifier:actions"}

Mijia Smart Evaporative Humidifier Pro (xiaomi.humidifier.600ek) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mijia Smart Evaporative Humidifier Pro" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Time dry_left_time "Drying Time Left" (G_humidifier) {channel="miio:basic:humidifier:dry_left_time"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Switch led "Display" (G_humidifier) {channel="miio:basic:humidifier:led"}
Number led_brightness "Display Brightness" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}
Switch delay "Turn-Off Delay" (G_humidifier) {channel="miio:basic:humidifier:delay"}
Number:Time delay_time "Turn-Off Delay Time" (G_humidifier) {channel="miio:basic:humidifier:delay_time"}
Number:Time delay_remain_time "Turn-Off Delay Remaining" (G_humidifier) {channel="miio:basic:humidifier:delay_remain_time"}
Number self_clean "Self-Cleaning" (G_humidifier) {channel="miio:basic:humidifier:self_clean"}
Number:Time clean_time_left "Self-Cleaning Time Left" (G_humidifier) {channel="miio:basic:humidifier:clean_time_left"}
Number filter_clean "Filter Cleaning" (G_humidifier) {channel="miio:basic:humidifier:filter_clean"}
String actions "Actions" (G_humidifier) {channel="miio:basic:humidifier:actions"}

Mijia Smart Anti-bacterial Humidifier 2 (xiaomi.humidifier.jsq2g) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mijia Smart Anti-bacterial Humidifier 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch water_tank_removed "Water Tank Removed" (G_humidifier) {channel="miio:basic:humidifier:water_tank_removed"}
Switch water_shortage "Insufficient Water" (G_humidifier) {channel="miio:basic:humidifier:water_shortage"}
Switch humidity_sensor_fault "Humidity Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:humidity_sensor_fault"}
Switch temperature_sensor_fault "Temperature Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:temperature_sensor_fault"}
Switch overwet_protection_active "Over-Humidity Protection Active" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection_active"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Switch constant_protection_active "Auto Turn-Off Active" (G_humidifier) {channel="miio:basic:humidifier:constant_protection_active"}
Switch constant_protection "Auto Turn-Off" (G_humidifier) {channel="miio:basic:humidifier:constant_protection"}

Xiaomi Smart Humidifier 2 (xiaomi.humidifier.jsq2w) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Xiaomi Smart Humidifier 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number status "Status" (G_humidifier) {channel="miio:basic:humidifier:status"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch led "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch water_tank_removed "Water Tank Removed" (G_humidifier) {channel="miio:basic:humidifier:water_tank_removed"}
Switch water_shortage "Insufficient Water" (G_humidifier) {channel="miio:basic:humidifier:water_shortage"}
Switch humidity_sensor_fault "Humidity Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:humidity_sensor_fault"}
Switch temperature_sensor_fault "Temperature Sensor Fault" (G_humidifier) {channel="miio:basic:humidifier:temperature_sensor_fault"}
Switch overwet_protection_active "Over-Humidity Protection Active" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection_active"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Switch high_humidity "High Humidity" (G_humidifier) {channel="miio:basic:humidifier:high_humidity"}

Mijia Mist-Free Humidifier 3 (400) (xiaomi.humidifier.p3) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Mijia Mist-Free Humidifier 3 (400)" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}
Number:Time delay_time "Turn-Off Delay Time" (G_humidifier) {channel="miio:basic:humidifier:delay_time"}
Number water_status "Water" (G_humidifier) {channel="miio:basic:humidifier:water_status"}
Switch overwet_protection "Over-Humidity Protection" (G_humidifier) {channel="miio:basic:humidifier:overwet_protection"}
Number:Time dry_left_time "Drying Time Left" (G_humidifier) {channel="miio:basic:humidifier:dry_left_time"}
Switch clean "Start Cleaning" (G_humidifier) {channel="miio:basic:humidifier:clean"}
Number:Time clean_time_left "Cleaning Time Left" (G_humidifier) {channel="miio:basic:humidifier:clean_time_left"}
Switch led "Display" (G_humidifier) {channel="miio:basic:humidifier:led"}
Number led_brightness "Display Brightness" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Number:Dimensionless filter_life_level "Filter Life" (G_humidifier) {channel="miio:basic:humidifier:filter_life_level"}
String actions "Actions" (G_humidifier) {channel="miio:basic:humidifier:actions"}

Mijia Smart Quiet Inverter Blender P1 (xiaomi.juicer.dempp1) item file lines ​

note: Autogenerated example. Replace the id (juicer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_juicer "Mijia Smart Quiet Inverter Blender P1" <status>
Number status "Status" (G_juicer) {channel="miio:basic:juicer:status"}
Number fault "Fault" (G_juicer) {channel="miio:basic:juicer:fault"}
Number cook_mode "Cook Mode" (G_juicer) {channel="miio:basic:juicer:cook_mode"}
Number:Time schedule_remaining_time "Schedule Remaining Time" (G_juicer) {channel="miio:basic:juicer:schedule_remaining_time"}
Number:Time remaining_time "Remaining Time" (G_juicer) {channel="miio:basic:juicer:remaining_time"}
Number:Temperature target_temperature "Target Temperature" (G_juicer) {channel="miio:basic:juicer:target_temperature"}
Switch pot_lift_memory "Resume After Lifting the Jug" (G_juicer) {channel="miio:basic:juicer:pot_lift_memory"}
Switch alarm "Sound" (G_juicer) {channel="miio:basic:juicer:alarm"}
Switch auto_screen_on "Screen Always On" (G_juicer) {channel="miio:basic:juicer:auto_screen_on"}
Number:Time auto_screen_on_time "Screen On Time" (G_juicer) {channel="miio:basic:juicer:auto_screen_on_time"}
String control "Control" (G_juicer) {channel="miio:basic:juicer:control"}

Mijia Smart Quiet Inverter Blender P1 (xiaomi.juicer.p1v2) item file lines ​

note: Autogenerated example. Replace the id (juicer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_juicer "Mijia Smart Quiet Inverter Blender P1" <status>
Number status "Status" (G_juicer) {channel="miio:basic:juicer:status"}
Number fault "Fault" (G_juicer) {channel="miio:basic:juicer:fault"}
Number cook_mode "Cook Mode" (G_juicer) {channel="miio:basic:juicer:cook_mode"}
Number:Time schedule_remaining_time "Schedule Remaining Time" (G_juicer) {channel="miio:basic:juicer:schedule_remaining_time"}
Number:Time remaining_time "Remaining Time" (G_juicer) {channel="miio:basic:juicer:remaining_time"}
Number:Temperature target_temperature "Target Temperature" (G_juicer) {channel="miio:basic:juicer:target_temperature"}
Switch pot_lift_memory "Resume After Lifting the Jug" (G_juicer) {channel="miio:basic:juicer:pot_lift_memory"}
Switch alarm "Sound" (G_juicer) {channel="miio:basic:juicer:alarm"}
Switch auto_screen_on "Screen Always On" (G_juicer) {channel="miio:basic:juicer:auto_screen_on"}
Number:Time auto_screen_on_time "Screen On Time" (G_juicer) {channel="miio:basic:juicer:auto_screen_on_time"}
String control "Control" (G_juicer) {channel="miio:basic:juicer:control"}

Xiaomi Smart Electric Hot Water Dispenser 5L (xiaomi.kettle.mek02) item file lines ​

note: Autogenerated example. Replace the id (kettle) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_kettle "Xiaomi Smart Electric Hot Water Dispenser 5L" <status>
Number status "Status" (G_kettle) {channel="miio:basic:kettle:status"}
Number fault "Fault" (G_kettle) {channel="miio:basic:kettle:fault"}
Number:Temperature temperature "Water Temperature" (G_kettle) {channel="miio:basic:kettle:temperature"}
String heating "Heating" (G_kettle) {channel="miio:basic:kettle:heating"}
Number:Temperature target_temperature "Target Temperature" (G_kettle) {channel="miio:basic:kettle:target_temperature"}
Number:Temperature boiling_point "Boiling Point" (G_kettle) {channel="miio:basic:kettle:boiling_point"}
Switch auto_keep_warm "Keep Warm After Heating" (G_kettle) {channel="miio:basic:kettle:auto_keep_warm"}
Number:Temperature keep_warm_temperature "Keep Warm Temperature" (G_kettle) {channel="miio:basic:kettle:keep_warm_temperature"}
Switch dechlorination "Dechlorination" (G_kettle) {channel="miio:basic:kettle:dechlorination"}
Switch pure_water_keep_warm "Pure Water Keep Warm" (G_kettle) {channel="miio:basic:kettle:pure_water_keep_warm"}
Number:Temperature pure_water_keep_warm_temperature "Pure Water Keep Warm Temperature" (G_kettle) {channel="miio:basic:kettle:pure_water_keep_warm_temperature"}
Number:Dimensionless dechlorination_progress "Dechlorination Progress" (G_kettle) {channel="miio:basic:kettle:dechlorination_progress"}
Number out_water_time "Dispense Amount" (G_kettle) {channel="miio:basic:kettle:out_water_time"}
String mode_id "Recipe" (G_kettle) {channel="miio:basic:kettle:mode_id"}
Number:Time reservation_left_time "Delayed Start Time Left" (G_kettle) {channel="miio:basic:kettle:reservation_left_time"}
Switch child_lock "Child Lock" (G_kettle) {channel="miio:basic:kettle:child_lock"}
Switch current_physical_control_lock "Child Lock Active" (G_kettle) {channel="miio:basic:kettle:current_physical_control_lock"}
Switch alarm "Sound" (G_kettle) {channel="miio:basic:kettle:alarm"}
Number auto_screen_off "Screen Off After" (G_kettle) {channel="miio:basic:kettle:auto_screen_off"}

Xiaomi Smart Kettle 2 Pro (xiaomi.kettle.v20) item file lines ​

note: Autogenerated example. Replace the id (kettle) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_kettle "Xiaomi Smart Kettle 2 Pro" <status>
Number status "Status" (G_kettle) {channel="miio:basic:kettle:status"}
Number fault "Fault" (G_kettle) {channel="miio:basic:kettle:fault"}
Number:Temperature temperature "Water Temperature" (G_kettle) {channel="miio:basic:kettle:temperature"}
String heating "Heating" (G_kettle) {channel="miio:basic:kettle:heating"}
Number:Temperature target_temperature "Target Temperature" (G_kettle) {channel="miio:basic:kettle:target_temperature"}
Number target_mode "Mode" (G_kettle) {channel="miio:basic:kettle:target_mode"}
Switch auto_keep_warm "Keep Warm" (G_kettle) {channel="miio:basic:kettle:auto_keep_warm"}
Number:Temperature keep_warm_temperature "Keep Warm Temperature" (G_kettle) {channel="miio:basic:kettle:keep_warm_temperature"}
Number:Time keep_warm_time "Keep Warm Time" (G_kettle) {channel="miio:basic:kettle:keep_warm_time"}
Number:Time warming_time "Keep Warm Elapsed Time" (G_kettle) {channel="miio:basic:kettle:warming_time"}
Switch kettle_lifting "Kettle Lifted" (G_kettle) {channel="miio:basic:kettle:kettle_lifting"}
Switch no_disturb "Do Not Disturb" (G_kettle) {channel="miio:basic:kettle:no_disturb"}
Switch custom_knob_temp "Custom Knob Temperature" (G_kettle) {channel="miio:basic:kettle:custom_knob_temp"}
Switch lift_remember_temp "Remember Temperature After Lifting" (G_kettle) {channel="miio:basic:kettle:lift_remember_temp"}
Switch boiling_reminder "Boiling Reminder" (G_kettle) {channel="miio:basic:kettle:boiling_reminder"}
Switch keep_warm_reminder "Keep Warm Reminder" (G_kettle) {channel="miio:basic:kettle:keep_warm_reminder"}

Xiaomi Smart Kettle 2 Pro (xiaomi.kettle.v21) item file lines ​

note: Autogenerated example. Replace the id (kettle) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_kettle "Xiaomi Smart Kettle 2 Pro" <status>
Number status "Status" (G_kettle) {channel="miio:basic:kettle:status"}
Number fault "Fault" (G_kettle) {channel="miio:basic:kettle:fault"}
Number:Temperature temperature "Water Temperature" (G_kettle) {channel="miio:basic:kettle:temperature"}
String heating "Heating" (G_kettle) {channel="miio:basic:kettle:heating"}
Number:Temperature target_temperature "Target Temperature" (G_kettle) {channel="miio:basic:kettle:target_temperature"}
Number target_mode "Mode" (G_kettle) {channel="miio:basic:kettle:target_mode"}
Switch auto_keep_warm "Keep Warm" (G_kettle) {channel="miio:basic:kettle:auto_keep_warm"}
Number:Temperature keep_warm_temperature "Keep Warm Temperature" (G_kettle) {channel="miio:basic:kettle:keep_warm_temperature"}
Number:Time keep_warm_time "Keep Warm Time" (G_kettle) {channel="miio:basic:kettle:keep_warm_time"}
Number:Time warming_time "Keep Warm Elapsed Time" (G_kettle) {channel="miio:basic:kettle:warming_time"}
Switch kettle_lifting "Kettle Lifted" (G_kettle) {channel="miio:basic:kettle:kettle_lifting"}
Switch no_disturb "Do Not Disturb" (G_kettle) {channel="miio:basic:kettle:no_disturb"}
Switch custom_knob_temp "Custom Knob Temperature" (G_kettle) {channel="miio:basic:kettle:custom_knob_temp"}
Switch lift_remember_temp "Remember Temperature After Lifting" (G_kettle) {channel="miio:basic:kettle:lift_remember_temp"}
Switch boiling_reminder "Boiling Reminder" (G_kettle) {channel="miio:basic:kettle:boiling_reminder"}
Switch keep_warm_reminder "Keep Warm Reminder" (G_kettle) {channel="miio:basic:kettle:keep_warm_reminder"}

Mijia Smart Pet Fountain 2 (xiaomi.pet_waterer.70m2) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "Mijia Smart Pet Fountain 2" <status>
Number fault "Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Number status "Status" (G_pet_waterer) {channel="miio:basic:pet_waterer:status"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time water_interval "Dispense Interval" (G_pet_waterer) {channel="miio:basic:pet_waterer:water_interval"}
Switch water_shortage "Water Shortage" (G_pet_waterer) {channel="miio:basic:pet_waterer:water_shortage"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_life_level"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch child_lock "Child Lock" (G_pet_waterer) {channel="miio:basic:pet_waterer:child_lock"}
Number:Dimensionless battery_level "Battery Level" (G_pet_waterer) {channel="miio:basic:pet_waterer:battery_level"}
Number charging_state "Charging State" (G_pet_waterer) {channel="miio:basic:pet_waterer:charging_state"}
Switch dnd "Do Not Disturb" (G_pet_waterer) {channel="miio:basic:pet_waterer:dnd"}
Switch low_battery "Low Battery" (G_pet_waterer) {channel="miio:basic:pet_waterer:low_battery"}
Switch charger_connected "Charger Connected" (G_pet_waterer) {channel="miio:basic:pet_waterer:charger_connected"}
Number:Time dnd_start "Do Not Disturb Start" (G_pet_waterer) {channel="miio:basic:pet_waterer:dnd_start"}
Number:Time dnd_end "Do Not Disturb End" (G_pet_waterer) {channel="miio:basic:pet_waterer:dnd_end"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}

Xiaomi Smart Pet Fountain 2 (xiaomi.pet_waterer.iv02) item file lines ​

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_pet_waterer "Xiaomi Smart Pet Fountain 2" <status>
Switch power "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:power"}
Number status "Status" (G_pet_waterer) {channel="miio:basic:pet_waterer:status"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time water_interval "Dispense Interval" (G_pet_waterer) {channel="miio:basic:pet_waterer:water_interval"}
Number:Time water_interval_new "Dispense Interval (New Firmware)" (G_pet_waterer) {channel="miio:basic:pet_waterer:water_interval_new"}
Switch water_shortage "Water Shortage" (G_pet_waterer) {channel="miio:basic:pet_waterer:water_shortage"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_life_level"}
Number:Time filter_left_time "Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter_left_time"}
Switch child_lock "Child Lock" (G_pet_waterer) {channel="miio:basic:pet_waterer:child_lock"}
Number:Dimensionless battery_level "Battery Level" (G_pet_waterer) {channel="miio:basic:pet_waterer:battery_level"}
Number charging_state "Charging State" (G_pet_waterer) {channel="miio:basic:pet_waterer:charging_state"}
Switch dnd "Do Not Disturb" (G_pet_waterer) {channel="miio:basic:pet_waterer:dnd"}
Switch low_battery "Low Battery" (G_pet_waterer) {channel="miio:basic:pet_waterer:low_battery"}
Switch charger_connected "Charger Connected" (G_pet_waterer) {channel="miio:basic:pet_waterer:charger_connected"}
Number:Time dnd_start "Do Not Disturb Start" (G_pet_waterer) {channel="miio:basic:pet_waterer:dnd_start"}
Number:Time dnd_end "Do Not Disturb End" (G_pet_waterer) {channel="miio:basic:pet_waterer:dnd_end"}
Switch pump_block_flag "Pump Blocked" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump_block_flag"}

Xiaomi Robot Vacuum T12 (xiaomi.vacuum.b106bk) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum T12" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Find Robot" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Dirt Detection" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Mode" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Obstacle Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}

Xiaomi Robot Vacuum S12 (xiaomi.vacuum.b106eu) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S12" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Find Robot" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch dirt_recognize "Sweep - Dirt Detection" (G_vacuum) {channel="miio:basic:vacuum:dirt_recognize"}
Switch pet_recognize "Sweep - Pet Mode" (G_vacuum) {channel="miio:basic:vacuum:pet_recognize"}
Switch ai_recognize "Sweep - AI Obstacle Recognition" (G_vacuum) {channel="miio:basic:vacuum:ai_recognize"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}

Xiaomi Robot Vacuum S20+ (xiaomi.vacuum.b108gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S20+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Sweep Mop Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Clean Times" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number suction_level "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_level"}
Number mop_water_output_level "Robot Cleaner - Mop Water Output Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
String zone_ids "Robot Cleaner - Zone IDs" (G_vacuum) {channel="miio:basic:vacuum:zone_ids"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Switch edge_swing_tail_sweep "Robot Cleaner - Edge Swing Tail Sweep" (G_vacuum) {channel="miio:basic:vacuum:edge_swing_tail_sweep"}
Number edge_sweep_frequency "Robot Cleaner - Edge Sweep Frequency" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep_frequency"}
String notice "Robot Cleaner - Notice" (G_vacuum) {channel="miio:basic:vacuum:notice"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Switch alarm "Alarm - Enabled" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number:Dimensionless volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Time brush_left_time "Main Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Switch mop_status "Vacuum Extend - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
String firmware_version "Vacuum Extend - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:firmware_version"}
Switch dnd_switch "Vacuum Extend - Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:dnd_switch"}
Switch carpet_boost "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch carpet_avoidance "Vacuum Extend - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoidance"}
Switch carpet_display "Vacuum Extend - Carpet Display" (G_vacuum) {channel="miio:basic:vacuum:carpet_display"}
Number status_extend "Vacuum Extend - Status Extend" (G_vacuum) {channel="miio:basic:vacuum:status_extend"}
String room_info "Vacuum Extend - Room Info" (G_vacuum) {channel="miio:basic:vacuum:room_info"}
Switch sweep_break_switch "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
String vacuum_position "Vacuum Map - Vacuum Position" (G_vacuum) {channel="miio:basic:vacuum:vacuum_position"}
Number permanent_map_id "Vacuum Map - Permanent Map Id" (G_vacuum) {channel="miio:basic:vacuum:permanent_map_id"}
Switch map_control_switch "Vacuum Map - Map Control Switch" (G_vacuum) {channel="miio:basic:vacuum:map_control_switch"}

Xiaomi Robot Vacuum E10 (xiaomi.vacuum.b112) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum E10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number map_privacy "Map - Map Privacy" (G_vacuum) {channel="miio:basic:vacuum:map_privacy"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}

Xiaomi Robot Vacuum E10C (xiaomi.vacuum.b112bk) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum E10C" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number map_privacy "Map - Map Privacy" (G_vacuum) {channel="miio:basic:vacuum:map_privacy"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}

Xiaomi Robot Vacuum E12 (xiaomi.vacuum.b112gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum E12" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number map_privacy "Map - Map Privacy" (G_vacuum) {channel="miio:basic:vacuum:map_privacy"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}

Xiaomi Robot Vacuum X20+ (xiaomi.vacuum.c102gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum X20+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_recognition "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_recognition"}
Switch smart_wash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:smart_wash_switch"}
Number carpet_escape "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_escape"}
Number:Time drying_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Mijia Robot Vacuum M30 Pro (xiaomi.vacuum.c107) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum M30 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Switch hot_water_mop_wash "Robot Cleaner - Hot Water Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:hot_water_mop_wash"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Frequency" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch cut_hair_config "Robot Cleaner - Auto Cutting Tangled Hair" (G_vacuum) {channel="miio:basic:vacuum:cut_hair_config"}
Number frequency_cut_hair_config "Robot Cleaner - Tangled Hair Cutting Frequency" (G_vacuum) {channel="miio:basic:vacuum:frequency_cut_hair_config"}
Switch use_detergent "Robot Cleaner - Use Detergent" (G_vacuum) {channel="miio:basic:vacuum:use_detergent"}
Switch detergent_depletion_reminder "Robot Cleaner - Detergent Depletion Reminder" (G_vacuum) {channel="miio:basic:vacuum:detergent_depletion_reminder"}
Number:Dimensionless detergent_left_level "Detergent - Detergent Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_left_level"}
Number:Time detergent_left_time "Detergent - Detergent Left Time" (G_vacuum) {channel="miio:basic:vacuum:detergent_left_time"}
Switch auto_water_change_installed "Robot Cleaner - Auto Water Refill And Drain Installed" (G_vacuum) {channel="miio:basic:vacuum:auto_water_change_installed"}
Number water_check_status "Robot Cleaner - Water Self Check Status" (G_vacuum) {channel="miio:basic:vacuum:water_check_status"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch edge_swing_tail_sweep "Robot Cleaner - Corners And Edges Focus" (G_vacuum) {channel="miio:basic:vacuum:edge_swing_tail_sweep"}
Number edge_sweep_frequency "Robot Cleaner - Corners And Edges Focus Frequency" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep_frequency"}
Switch sweep_ai_detection "Robot Cleaner - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:sweep_ai_detection"}
Switch ai_cleaning "Robot Cleaner - AI Obstacle Avoidance" (G_vacuum) {channel="miio:basic:vacuum:ai_cleaning"}
Switch solid_dirt_detection "Robot Cleaner - Solid Dirt Recognition" (G_vacuum) {channel="miio:basic:vacuum:solid_dirt_detection"}
Switch dirt_detection "Robot Cleaner - Key Stain Recognition" (G_vacuum) {channel="miio:basic:vacuum:dirt_detection"}
Switch object_detection "Robot Cleaner - Obstacle Recognition" (G_vacuum) {channel="miio:basic:vacuum:object_detection"}
Switch room_detection "Robot Cleaner - Room Recognition" (G_vacuum) {channel="miio:basic:vacuum:room_detection"}
Switch floor_material_detection "Robot Cleaner - Floor Material Recognition" (G_vacuum) {channel="miio:basic:vacuum:floor_material_detection"}
Switch ai_managed_cleaning "Robot Cleaner - AI Hosted Cleanup" (G_vacuum) {channel="miio:basic:vacuum:ai_managed_cleaning"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum E5 (xiaomi.vacuum.c108) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum E5" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_type "Robot Cleaner - Cleanup Range" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number suction_level "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_level"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
String last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless brush_life_level "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Switch no_disturb "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
String enable_time_period "Do Not Disturb - Time Period" (G_vacuum) {channel="miio:basic:vacuum:enable_time_period"}
Number:Area total_clean_area "Clean Record - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number:Time total_clean_time "Clean Record - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_count "Clean Record - Total Clean Count" (G_vacuum) {channel="miio:basic:vacuum:total_clean_count"}
Number direction_key "Remote Control - Direction" (G_vacuum) {channel="miio:basic:vacuum:direction_key"}
Switch lighting "Lighting - Light" (G_vacuum) {channel="miio:basic:vacuum:lighting"}

Xiaomi Robot Vacuum X20 Pro (xiaomi.vacuum.d102gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum X20 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Switch sewage_self_cleaning "Robot Cleaner - Dirty Water Pipeline Self-Cleaning" (G_vacuum) {channel="miio:basic:vacuum:sewage_self_cleaning"}

Xiaomi Robot Vacuum S20 (xiaomi.vacuum.d106gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S20" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Switch alarm "Alarm - Locate" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch repeat_state "Sweep - Clean Twice" (G_vacuum) {channel="miio:basic:vacuum:repeat_state"}
Number door_state "Sweep - Installed Box" (G_vacuum) {channel="miio:basic:vacuum:door_state"}
Switch cloth_state "Sweep - Mop Attached" (G_vacuum) {channel="miio:basic:vacuum:cloth_state"}
Number suction_state "Sweep - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:suction_state"}
Number water_state "Sweep - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_state"}
Number mop_route "Sweep - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number:Dimensionless side_brush_life "Sweep - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side_brush_life"}
Number:Time side_brush_hours "Sweep - Side Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:side_brush_hours"}
Number:Dimensionless main_brush_life "Sweep - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main_brush_life"}
Number:Time main_brush_hours "Sweep - Main Brush Time Left" (G_vacuum) {channel="miio:basic:vacuum:main_brush_hours"}
Number:Dimensionless hypa_life "Sweep - Filter Life" (G_vacuum) {channel="miio:basic:vacuum:hypa_life"}
Number:Time hypa_hours "Sweep - Filter Time Left" (G_vacuum) {channel="miio:basic:vacuum:hypa_hours"}
Number:Dimensionless mop_life "Sweep - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop_life"}
Number:Time mop_hours "Sweep - Mop Time Left" (G_vacuum) {channel="miio:basic:vacuum:mop_hours"}
Number direction "Sweep - Remote Control Direction" (G_vacuum) {channel="miio:basic:vacuum:direction"}
Number:Time cleaning_time "Sweep - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Sweep - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Switch carpet_booster "Sweep - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_booster"}
Switch carpet_avoid "Sweep - Carpet Avoidance" (G_vacuum) {channel="miio:basic:vacuum:carpet_avoid"}
Switch tank_shake "Sweep - Mop Vibration" (G_vacuum) {channel="miio:basic:vacuum:tank_shake"}
Number shake_shift "Sweep - Mop Vibration Level" (G_vacuum) {channel="miio:basic:vacuum:shake_shift"}
Switch carpet_show "Sweep - Carpet Display" (G_vacuum) {channel="miio:basic:vacuum:carpet_show"}
Number build_map "Map - Mapping Status" (G_vacuum) {channel="miio:basic:vacuum:build_map"}
Number map_uploads "Map - Map Upload" (G_vacuum) {channel="miio:basic:vacuum:map_uploads"}
Switch dnd_enable "Do Not Disturb - Enabled" (G_vacuum) {channel="miio:basic:vacuum:dnd_enable"}
Number dnd_start_hour "Do Not Disturb - Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_hour"}
Number dnd_start_minute "Do Not Disturb - Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_start_minute"}
Number dnd_end_hour "Do Not Disturb - End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_hour"}
Number dnd_end_minute "Do Not Disturb - End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd_end_minute"}

Xiaomi Robot Vacuum X20 Max (xiaomi.vacuum.d109gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum X20 Max" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Switch sewage_self_cleaning "Robot Cleaner - Dirty Water Pipeline Self-Cleaning" (G_vacuum) {channel="miio:basic:vacuum:sewage_self_cleaning"}

Mijia Robot Vacuum M40 (xiaomi.vacuum.d110ch) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum M40" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless detergent_life_level "Detergent - Detergent Life Level" (G_vacuum) {channel="miio:basic:vacuum:detergent_life_level"}
Number:Time detergent_left_time "Detergent - Detergent Left Time" (G_vacuum) {channel="miio:basic:vacuum:detergent_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number water_level "General Protocol - Mop Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Switch waterbox_status "Vacuum Extend - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Switch break_point_restart "Vacuum Extend - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Switch carpet_press "Vacuum Extend - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
Switch carpet_first "General Protocol - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:carpet_first"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number clean_setting "Vacuum Extend - Clean Setting" (G_vacuum) {channel="miio:basic:vacuum:clean_setting"}
Number wash_station "Vacuum Extend - Wash Station" (G_vacuum) {channel="miio:basic:vacuum:wash_station"}
Number hot_water_level "General Protocol - Mop Washing Water Temperature" (G_vacuum) {channel="miio:basic:vacuum:hot_water_level"}
Switch child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Number carpet_recognition "Vacuum Extend - Carpet Recognition" (G_vacuum) {channel="miio:basic:vacuum:carpet_recognition"}
Switch smart_wash_switch "Vacuum Extend - Auto Mop Pad Washing" (G_vacuum) {channel="miio:basic:vacuum:smart_wash_switch"}
Number carpet_escape "Vacuum Extend - Carpet Cleanup Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_escape"}
Number clean_fluid_switch "Vacuum Extend - Use Detergent" (G_vacuum) {channel="miio:basic:vacuum:clean_fluid_switch"}
Number:Time drying_time "Vacuum Extend - Mop Pad Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Number mop_wash_mode "Vacuum Extend - Mop Pad Washing Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_wash_mode"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number:Area total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

Xiaomi Robot Vacuum S40C (xiaomi.vacuum.e101gb) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S40C" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Mijia Robot Vacuum 5 Pro (xiaomi.vacuum.ov21cn) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum 5 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum 5 Pro (xiaomi.vacuum.ov21gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum 5 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum 5 (xiaomi.vacuum.ov31gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum 5" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum H50 Pro (xiaomi.vacuum.ov42gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum H50 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum H50 (xiaomi.vacuum.ov43gb) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum H50" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch enable_mop_wash "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:enable_mop_wash"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Switch auto_mop_dry "Robot Cleaner - Auto Mop Drying" (G_vacuum) {channel="miio:basic:vacuum:auto_mop_dry"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum H40 (xiaomi.vacuum.ov51gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum H40" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum S40 Pro (xiaomi.vacuum.ov71gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S40 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch mop_outer_swing "Robot Cleaner - Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum S40 (xiaomi.vacuum.ov81gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S40" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Mijia Robot Vacuum 6 Max (xiaomi.vacuum.pv11cn) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum 6 Max" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_wash_roller "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:auto_wash_roller"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Number wash_mop_water_temperature "Robot Cleaner - Mop Washing Water Temperature" (G_vacuum) {channel="miio:basic:vacuum:wash_mop_water_temperature"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Switch use_detergent "Robot Cleaner - Wash Mop With Detergent" (G_vacuum) {channel="miio:basic:vacuum:use_detergent"}
Switch detergent_depletion_reminder "Robot Cleaner - Detergent Depletion Reminder" (G_vacuum) {channel="miio:basic:vacuum:detergent_depletion_reminder"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch roller_outswing "Robot Cleaner - Roller Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:roller_outswing"}
Switch mop_outer_swing "Robot Cleaner - Edge Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number base_station_water_tank_status "Base Station - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:base_station_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Switch sweep_ai_detection "Robot Cleaner - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:sweep_ai_detection"}
Switch dirt_detection "Robot Cleaner - AI Dirt Recognition" (G_vacuum) {channel="miio:basic:vacuum:dirt_detection"}
Switch real_scene_capture "Robot Cleaner - AI Real-Scene Photos" (G_vacuum) {channel="miio:basic:vacuum:real_scene_capture"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless roller_life_level "Roller - Roller Life Level" (G_vacuum) {channel="miio:basic:vacuum:roller_life_level"}
Number:Time roller_left_time "Roller - Roller Left Time" (G_vacuum) {channel="miio:basic:vacuum:roller_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum 6 Max (xiaomi.vacuum.pv11gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum 6 Max" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_wash_roller "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:auto_wash_roller"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Number wash_mop_water_temperature "Robot Cleaner - Mop Washing Water Temperature" (G_vacuum) {channel="miio:basic:vacuum:wash_mop_water_temperature"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Switch use_detergent "Robot Cleaner - Wash Mop With Detergent" (G_vacuum) {channel="miio:basic:vacuum:use_detergent"}
Switch detergent_depletion_reminder "Robot Cleaner - Detergent Depletion Reminder" (G_vacuum) {channel="miio:basic:vacuum:detergent_depletion_reminder"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch roller_outswing "Robot Cleaner - Roller Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:roller_outswing"}
Switch mop_outer_swing "Robot Cleaner - Edge Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number base_station_water_tank_status "Base Station - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:base_station_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Switch sweep_ai_detection "Robot Cleaner - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:sweep_ai_detection"}
Switch dirt_detection "Robot Cleaner - AI Dirt Recognition" (G_vacuum) {channel="miio:basic:vacuum:dirt_detection"}
Switch real_scene_capture "Robot Cleaner - AI Real-Scene Photos" (G_vacuum) {channel="miio:basic:vacuum:real_scene_capture"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless roller_life_level "Roller - Roller Life Level" (G_vacuum) {channel="miio:basic:vacuum:roller_life_level"}
Number:Time roller_left_time "Roller - Roller Left Time" (G_vacuum) {channel="miio:basic:vacuum:roller_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Mijia Robot Vacuum 6 Pro (xiaomi.vacuum.pv21cn) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Mijia Robot Vacuum 6 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_wash_roller "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:auto_wash_roller"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Number wash_mop_water_temperature "Robot Cleaner - Mop Washing Water Temperature" (G_vacuum) {channel="miio:basic:vacuum:wash_mop_water_temperature"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Switch use_detergent "Robot Cleaner - Wash Mop With Detergent" (G_vacuum) {channel="miio:basic:vacuum:use_detergent"}
Switch detergent_depletion_reminder "Robot Cleaner - Detergent Depletion Reminder" (G_vacuum) {channel="miio:basic:vacuum:detergent_depletion_reminder"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch roller_outswing "Robot Cleaner - Roller Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:roller_outswing"}
Switch mop_outer_swing "Robot Cleaner - Edge Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number base_station_water_tank_status "Base Station - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:base_station_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Switch sweep_ai_detection "Robot Cleaner - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:sweep_ai_detection"}
Switch dirt_detection "Robot Cleaner - AI Dirt Recognition" (G_vacuum) {channel="miio:basic:vacuum:dirt_detection"}
Switch real_scene_capture "Robot Cleaner - AI Real-Scene Photos" (G_vacuum) {channel="miio:basic:vacuum:real_scene_capture"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless roller_life_level "Roller - Roller Life Level" (G_vacuum) {channel="miio:basic:vacuum:roller_life_level"}
Number:Time roller_left_time "Roller - Roller Left Time" (G_vacuum) {channel="miio:basic:vacuum:roller_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum 6 Pro (xiaomi.vacuum.pv21gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum 6 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_wash_roller "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:auto_wash_roller"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Number wash_mop_water_temperature "Robot Cleaner - Mop Washing Water Temperature" (G_vacuum) {channel="miio:basic:vacuum:wash_mop_water_temperature"}
Switch repeat_wash_mop "Robot Cleaner - Repeat Mop Washing" (G_vacuum) {channel="miio:basic:vacuum:repeat_wash_mop"}
Switch use_detergent "Robot Cleaner - Wash Mop With Detergent" (G_vacuum) {channel="miio:basic:vacuum:use_detergent"}
Switch detergent_depletion_reminder "Robot Cleaner - Detergent Depletion Reminder" (G_vacuum) {channel="miio:basic:vacuum:detergent_depletion_reminder"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch roller_outswing "Robot Cleaner - Roller Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:roller_outswing"}
Switch mop_outer_swing "Robot Cleaner - Edge Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number sewage_tank_status "Base Station - Dirty Water Tank" (G_vacuum) {channel="miio:basic:vacuum:sewage_tank_status"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number base_station_water_tank_status "Base Station - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:base_station_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number water_tank_status "Robot Cleaner - Water Tank Status" (G_vacuum) {channel="miio:basic:vacuum:water_tank_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Switch sweep_ai_detection "Robot Cleaner - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:sweep_ai_detection"}
Switch dirt_detection "Robot Cleaner - AI Dirt Recognition" (G_vacuum) {channel="miio:basic:vacuum:dirt_detection"}
Switch real_scene_capture "Robot Cleaner - AI Real-Scene Photos" (G_vacuum) {channel="miio:basic:vacuum:real_scene_capture"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Number:Dimensionless roller_life_level "Roller - Roller Life Level" (G_vacuum) {channel="miio:basic:vacuum:roller_life_level"}
Number:Time roller_left_time "Roller - Roller Left Time" (G_vacuum) {channel="miio:basic:vacuum:roller_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum 6 (xiaomi.vacuum.pv32gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum 6" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_wash_roller "Robot Cleaner - Wash Mop At Station" (G_vacuum) {channel="miio:basic:vacuum:auto_wash_roller"}
Number frequency_mop_wash "Robot Cleaner - Mop Washing Interval Type" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash"}
Number frequency_mop_wash_no_tank "Robot Cleaner - Mop Washing Area Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_no_tank"}
Number:Time frequency_mop_wash_by_time "Robot Cleaner - Mop Washing Time Interval" (G_vacuum) {channel="miio:basic:vacuum:frequency_mop_wash_by_time"}
Number water_output_for_washing_mop "Robot Cleaner - Mop Washing Water Output" (G_vacuum) {channel="miio:basic:vacuum:water_output_for_washing_mop"}
Number wash_mop_water_temperature "Robot Cleaner - Mop Washing Water Temperature" (G_vacuum) {channel="miio:basic:vacuum:wash_mop_water_temperature"}
Switch use_detergent "Robot Cleaner - Wash Mop With Detergent" (G_vacuum) {channel="miio:basic:vacuum:use_detergent"}
Number drying_time "Robot Cleaner - Mop Drying Time" (G_vacuum) {channel="miio:basic:vacuum:drying_time"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch roller_outswing "Robot Cleaner - Roller Mop Extension" (G_vacuum) {channel="miio:basic:vacuum:roller_outswing"}
Number mop_outer_swing_frequency "Robot Cleaner - Mop Extension Frequency" (G_vacuum) {channel="miio:basic:vacuum:mop_outer_swing_frequency"}
Switch brush_outswing "Robot Cleaner - Side Brush Extension" (G_vacuum) {channel="miio:basic:vacuum:brush_outswing"}
Number host_water_tank_status "Robot Cleaner - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:host_water_tank_status"}
Number base_station_water_tank_status "Base Station - Water Tank Emptying" (G_vacuum) {channel="miio:basic:vacuum:base_station_water_tank_status"}
Number:Dimensionless drying_progress "Robot Cleaner - Drying Progress" (G_vacuum) {channel="miio:basic:vacuum:drying_progress"}
Number:Time dry_left_time "Robot Cleaner - Dry Left Time" (G_vacuum) {channel="miio:basic:vacuum:dry_left_time"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number obstacle_avoidance_strategy "Robot Cleaner - Obstacle Avoidance Strategy" (G_vacuum) {channel="miio:basic:vacuum:obstacle_avoidance_strategy"}
Switch sweep_ai_detection "Robot Cleaner - AI Recognition" (G_vacuum) {channel="miio:basic:vacuum:sweep_ai_detection"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless roller_life_level "Roller - Roller Life Level" (G_vacuum) {channel="miio:basic:vacuum:roller_life_level"}
Number:Time roller_left_time "Roller - Roller Left Time" (G_vacuum) {channel="miio:basic:vacuum:roller_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum S60+ (xiaomi.vacuum.pv51gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S60+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch vibration_mop_switch "Robot Cleaner - Vibratory Mopping" (G_vacuum) {channel="miio:basic:vacuum:vibration_mop_switch"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Xiaomi Robot Vacuum S60 (xiaomi.vacuum.pv81gl) item file lines ​

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_vacuum "Xiaomi Robot Vacuum S60" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
String vacuum_frameware_version "Robot Cleaner - Firmware Version" (G_vacuum) {channel="miio:basic:vacuum:vacuum_frameware_version"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number sweep_mop_type "Robot Cleaner - Cleaning Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_type"}
Number sweep_type "Robot Cleaner - Cleaning Scope" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number:Area cleaning_area "Robot Cleaner - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number:Time cleaning_time "Robot Cleaner - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number clean_times "Robot Cleaner - Number Of Cleanings" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number mode "Robot Cleaner - Suction Level" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number mop_water_output_level "Robot Cleaner - Mop Water Level" (G_vacuum) {channel="miio:basic:vacuum:mop_water_output_level"}
Switch mop_status "Robot Cleaner - Mop Installed" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number last_clean_time "Robot Cleaner - Last Clean Time" (G_vacuum) {channel="miio:basic:vacuum:last_clean_time"}
Number worry_free_clean_mode "Robot Cleaner - Shortcut Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:worry_free_clean_mode"}
Switch carpet_boost "Robot Cleaner - Carpet Boost" (G_vacuum) {channel="miio:basic:vacuum:carpet_boost"}
Switch sweep_break_switch "Robot Cleaner - Resume After Charging" (G_vacuum) {channel="miio:basic:vacuum:sweep_break_switch"}
Switch auto_dust_arrest "Robot Cleaner - Auto Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:auto_dust_arrest"}
Number dust_arrest_frequency "Robot Cleaner - Dust Collection Frequency" (G_vacuum) {channel="miio:basic:vacuum:dust_arrest_frequency"}
Switch carpet_deep_cleaning "Robot Cleaner - Carpet Deep Cleaning" (G_vacuum) {channel="miio:basic:vacuum:carpet_deep_cleaning"}
Switch sweep_carpet_first "Robot Cleaner - Vacuum Carpets First" (G_vacuum) {channel="miio:basic:vacuum:sweep_carpet_first"}
Switch carpet_discriminate "Robot Cleaner - Carpet Detection" (G_vacuum) {channel="miio:basic:vacuum:carpet_discriminate"}
Switch vibration_mop_switch "Robot Cleaner - Vibratory Mopping" (G_vacuum) {channel="miio:basic:vacuum:vibration_mop_switch"}
Number sweep_mop_status "Robot Cleaner - Current Task" (G_vacuum) {channel="miio:basic:vacuum:sweep_mop_status"}
Number:Dimensionless cleaning_progress "Robot Cleaner - Cleaning Progress" (G_vacuum) {channel="miio:basic:vacuum:cleaning_progress"}
Number:Dimensionless dust_bag_life_level "Dust Bag - Dust Bag Life Level" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_life_level"}
Number:Time dust_bag_left_time "Dust Bag - Dust Bag Left Time" (G_vacuum) {channel="miio:basic:vacuum:dust_bag_left_time"}
Number carpet_cleaning_method "Robot Cleaner - Carpet Cleaning Method" (G_vacuum) {channel="miio:basic:vacuum:carpet_cleaning_method"}
Number sweep_route "Robot Cleaner - Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:sweep_route"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number voltage "Battery - Voltage" (G_vacuum) {channel="miio:basic:vacuum:voltage"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch physical_controls_locked "Child Lock" (G_vacuum) {channel="miio:basic:vacuum:physical_controls_locked"}
Switch current_physical_control_lock "Child Lock - Current State" (G_vacuum) {channel="miio:basic:vacuum:current_physical_control_lock"}
Number:Dimensionless mop_life_level "Mop - Mop Life Level" (G_vacuum) {channel="miio:basic:vacuum:mop_life_level"}
Number:Time mop_left_time "Mop - Mop Left Time" (G_vacuum) {channel="miio:basic:vacuum:mop_left_time"}
Switch no_disturb "Do Not Disturb" (G_vacuum) {channel="miio:basic:vacuum:no_disturb"}
Switch current_no_disturb "Do Not Disturb - Active" (G_vacuum) {channel="miio:basic:vacuum:current_no_disturb"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}

Mijia Smart Water Purifier N800G (xiaomi.waterpuri.cmn800) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mijia Smart Water Purifier N800G" <status>
Number status "Status" (G_waterpuri) {channel="miio:basic:waterpuri:status"}
Number fault "Fault" (G_waterpuri) {channel="miio:basic:waterpuri:fault"}
Number:Temperature temperature "Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Dimensionless filter_life_ppc "PPC Filter Life" (G_waterpuri) {channel="miio:basic:waterpuri:filter_life_ppc"}
Number:Dimensionless filter_life_ro "RO Filter Life" (G_waterpuri) {channel="miio:basic:waterpuri:filter_life_ro"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}
Switch pipeline_connection "Dispenser Mode" (G_waterpuri) {channel="miio:basic:waterpuri:pipeline_connection"}
Switch holiday_mode "Holiday Mode" (G_waterpuri) {channel="miio:basic:waterpuri:holiday_mode"}
Switch anti_icing_remind "Low Temperature Notification" (G_waterpuri) {channel="miio:basic:waterpuri:anti_icing_remind"}
Switch no_production_water_time "Long Idle" (G_waterpuri) {channel="miio:basic:waterpuri:no_production_water_time"}
Switch no_disturb "Do Not Disturb" (G_waterpuri) {channel="miio:basic:waterpuri:no_disturb"}
String no_disturb_period "Do Not Disturb Period" (G_waterpuri) {channel="miio:basic:waterpuri:no_disturb_period"}
Number reset_status "Reset Status" (G_waterpuri) {channel="miio:basic:waterpuri:reset_status"}

Uclean Smart Toilet Seat (xjx.toilet.pro) item file lines ​

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_toilet "Uclean Smart Toilet Seat" <status>
Switch seated "Seated" (G_toilet) {channel="miio:basic:toilet:seated"}
Switch rear_wash "Rear Wash" (G_toilet) {channel="miio:basic:toilet:rear_wash"}
Switch bidet "Bidet" (G_toilet) {channel="miio:basic:toilet:bidet"}
Switch dry "Dry" (G_toilet) {channel="miio:basic:toilet:dry"}
Number seat_temperature "Seat Heating" (G_toilet) {channel="miio:basic:toilet:seat_temperature"}
Switch night_light "Night Light" (G_toilet) {channel="miio:basic:toilet:night_light"}
Switch deodorization "Deodorization" (G_toilet) {channel="miio:basic:toilet:deodorization"}
Switch self_clean "Self Clean" (G_toilet) {channel="miio:basic:toilet:self_clean"}
Number rear_water_temperature "Rear Wash Water Temperature" (G_toilet) {channel="miio:basic:toilet:rear_water_temperature"}
Number rear_water_pressure "Rear Wash Water Pressure" (G_toilet) {channel="miio:basic:toilet:rear_water_pressure"}
Number rear_wash_position "Rear Wash Position" (G_toilet) {channel="miio:basic:toilet:rear_wash_position"}
Number bidet_water_temperature "Bidet Water Temperature" (G_toilet) {channel="miio:basic:toilet:bidet_water_temperature"}
Number bidet_water_pressure "Bidet Water Pressure" (G_toilet) {channel="miio:basic:toilet:bidet_water_pressure"}
Number bidet_position "Bidet Position" (G_toilet) {channel="miio:basic:toilet:bidet_position"}
Switch moving "Moving Wash" (G_toilet) {channel="miio:basic:toilet:moving"}
Number massage "Massage" (G_toilet) {channel="miio:basic:toilet:massage"}
Number dryer_temperature "Dryer Temperature" (G_toilet) {channel="miio:basic:toilet:dryer_temperature"}
Number:Time filter_days_left "Filter Days Left" (G_toilet) {channel="miio:basic:toilet:filter_days_left"}

Uclean Smart Toilet pure (xjx.toilet.pure) item file lines ​

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_toilet "Uclean Smart Toilet pure" <status>
Switch seated "Seated" (G_toilet) {channel="miio:basic:toilet:seated"}
Switch rear_wash "Rear Wash" (G_toilet) {channel="miio:basic:toilet:rear_wash"}
Switch bidet "Bidet" (G_toilet) {channel="miio:basic:toilet:bidet"}
Switch dry "Dry" (G_toilet) {channel="miio:basic:toilet:dry"}
Switch seat_heating "Seat Heating" (G_toilet) {channel="miio:basic:toilet:seat_heating"}
Switch night_light "Night Light" (G_toilet) {channel="miio:basic:toilet:night_light"}
Number seat_temperature "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temperature"}
Number rear_water_temperature "Rear Wash Water Temperature" (G_toilet) {channel="miio:basic:toilet:rear_water_temperature"}
Number rear_water_pressure "Rear Wash Water Pressure" (G_toilet) {channel="miio:basic:toilet:rear_water_pressure"}
Number bidet_water_temperature "Bidet Water Temperature" (G_toilet) {channel="miio:basic:toilet:bidet_water_temperature"}
Number bidet_water_pressure "Bidet Water Pressure" (G_toilet) {channel="miio:basic:toilet:bidet_water_pressure"}
Number dryer_temperature "Dryer Temperature" (G_toilet) {channel="miio:basic:toilet:dryer_temperature"}
Switch self_clean "Self Clean" (G_toilet) {channel="miio:basic:toilet:self_clean"}
Switch flush "Flush" (G_toilet) {channel="miio:basic:toilet:flush"}
Switch foam_shield "Foam Shield" (G_toilet) {channel="miio:basic:toilet:foam_shield"}

Uclean Smart Toilet relax (xjx.toilet.relax) item file lines ​

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_toilet "Uclean Smart Toilet relax" <status>
Switch seated "Seated" (G_toilet) {channel="miio:basic:toilet:seated"}
Switch rear_wash "Rear Wash" (G_toilet) {channel="miio:basic:toilet:rear_wash"}
Switch bidet "Bidet" (G_toilet) {channel="miio:basic:toilet:bidet"}
Switch dry "Dry" (G_toilet) {channel="miio:basic:toilet:dry"}
Switch seat_heating "Seat Heating" (G_toilet) {channel="miio:basic:toilet:seat_heating"}
Switch night_light "Night Light" (G_toilet) {channel="miio:basic:toilet:night_light"}
Number seat_temperature "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temperature"}
Number rear_water_temperature "Rear Wash Water Temperature" (G_toilet) {channel="miio:basic:toilet:rear_water_temperature"}
Number rear_water_pressure "Rear Wash Water Pressure" (G_toilet) {channel="miio:basic:toilet:rear_water_pressure"}
Number bidet_water_temperature "Bidet Water Temperature" (G_toilet) {channel="miio:basic:toilet:bidet_water_temperature"}
Number bidet_water_pressure "Bidet Water Pressure" (G_toilet) {channel="miio:basic:toilet:bidet_water_pressure"}
Number dryer_temperature "Dryer Temperature" (G_toilet) {channel="miio:basic:toilet:dryer_temperature"}
Switch self_clean "Self Clean" (G_toilet) {channel="miio:basic:toilet:self_clean"}
Switch flush "Flush" (G_toilet) {channel="miio:basic:toilet:flush"}
Switch foam_shield "Foam Shield" (G_toilet) {channel="miio:basic:toilet:foam_shield"}

Whale Spout Smart Toilet Zero (xjx.toilet.zero) item file lines ​

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_toilet "Whale Spout Smart Toilet Zero" <status>
Switch seated "Seated" (G_toilet) {channel="miio:basic:toilet:seated"}
Switch rear_wash "Rear Wash" (G_toilet) {channel="miio:basic:toilet:rear_wash"}
Switch bidet "Bidet" (G_toilet) {channel="miio:basic:toilet:bidet"}
Switch dry "Dry" (G_toilet) {channel="miio:basic:toilet:dry"}
Switch seat_heating "Seat Heating" (G_toilet) {channel="miio:basic:toilet:seat_heating"}
Switch night_light "Night Light" (G_toilet) {channel="miio:basic:toilet:night_light"}
Number seat_temperature "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temperature"}
Number rear_water_temperature "Rear Wash Water Temperature" (G_toilet) {channel="miio:basic:toilet:rear_water_temperature"}
Number rear_water_pressure "Rear Wash Water Pressure" (G_toilet) {channel="miio:basic:toilet:rear_water_pressure"}
Number bidet_water_temperature "Bidet Water Temperature" (G_toilet) {channel="miio:basic:toilet:bidet_water_temperature"}
Number bidet_water_pressure "Bidet Water Pressure" (G_toilet) {channel="miio:basic:toilet:bidet_water_pressure"}
Number dryer_temperature "Dryer Temperature" (G_toilet) {channel="miio:basic:toilet:dryer_temperature"}
Switch self_clean "Self Clean" (G_toilet) {channel="miio:basic:toilet:self_clean"}
Switch flush "Flush" (G_toilet) {channel="miio:basic:toilet:flush"}
Switch foam_shield "Foam Shield" (G_toilet) {channel="miio:basic:toilet:foam_shield"}

note: Autogenerated example. Replace the id (bhf_light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_bhf_light "Yeelight Smart Bath Heater Pro" <status>
Switch power "Light" (G_bhf_light) {channel="miio:basic:bhf_light:power"}
Dimmer brightness "Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:color_temperature"}
Switch night_light "Night Light" (G_bhf_light) {channel="miio:basic:bhf_light:night_light"}
Number:Dimensionless nightlight_brightness "Night Light Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:nightlight_brightness"}
Number:Time light_off_timer "Light Off Timer" (G_bhf_light) {channel="miio:basic:bhf_light:light_off_timer"}
String heater_mode "Heater Mode" (G_bhf_light) {channel="miio:basic:bhf_light:heater_mode"}
Number:Time heater_timer "Heater Timer" (G_bhf_light) {channel="miio:basic:bhf_light:heater_timer"}
Number:Temperature target_temperature "Target Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:target_temperature"}
Number:Temperature temperature "Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:temperature"}
Number:Dimensionless humidity "Humidity" (G_bhf_light) {channel="miio:basic:bhf_light:humidity"}
Number fan_level "Fan Level" (G_bhf_light) {channel="miio:basic:bhf_light:fan_level"}
String swing "Swing" (G_bhf_light) {channel="miio:basic:bhf_light:swing"}
Number:Angle swing_angle "Wind Direction" (G_bhf_light) {channel="miio:basic:bhf_light:swing_angle"}

note: Autogenerated example. Replace the id (bhf_light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_bhf_light "Yeelight Smart Bath Heater" <status>
Switch power "Light" (G_bhf_light) {channel="miio:basic:bhf_light:power"}
Dimmer brightness "Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:color_temperature"}
Switch night_light "Night Light" (G_bhf_light) {channel="miio:basic:bhf_light:night_light"}
Number:Dimensionless nightlight_brightness "Night Light Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:nightlight_brightness"}
Number:Time light_off_timer "Light Off Timer" (G_bhf_light) {channel="miio:basic:bhf_light:light_off_timer"}
String heater_mode "Heater Mode" (G_bhf_light) {channel="miio:basic:bhf_light:heater_mode"}
Number:Time heater_timer "Heater Timer" (G_bhf_light) {channel="miio:basic:bhf_light:heater_timer"}
Number:Temperature target_temperature "Target Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:target_temperature"}
Number:Temperature temperature "Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:temperature"}
Number:Dimensionless humidity "Humidity" (G_bhf_light) {channel="miio:basic:bhf_light:humidity"}
Number fan_level "Fan Level" (G_bhf_light) {channel="miio:basic:bhf_light:fan_level"}
String swing "Swing" (G_bhf_light) {channel="miio:basic:bhf_light:swing"}
Number:Angle swing_angle "Wind Direction" (G_bhf_light) {channel="miio:basic:bhf_light:swing_angle"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Bedside Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Bedside Lamp 2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Smart Lamp D2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Ceiling Light Pro" <status>
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Light - Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Arwen Ceiling Light" <status>
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Light - Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}
Switch on1 "Ambient Light - Power" (G_light) {channel="miio:basic:light:on1"}
Number mode1 "Ambient Light - Mode" (G_light) {channel="miio:basic:light:mode1"}
Dimmer brightness1 "Ambient Light - Brightness" (G_light) {channel="miio:basic:light:brightness1"}
Number:Temperature color_temperature1 "Ambient Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature1"}
Color color "Ambient Light - Color" (G_light) {channel="miio:basic:light:color"}
Number:Dimensionless saturability "Ambient Light - Saturation" (G_light) {channel="miio:basic:light:saturability"}
Switch flow "Ambient Light - Color Flow" (G_light) {channel="miio:basic:light:flow"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light SE" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_light) {channel="miio:basic:light:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_light) {channel="miio:basic:light:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (ceiling4) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_ceiling4 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling4) {channel="miio:basic:ceiling4:power"}
Dimmer brightness "Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling4) {channel="miio:basic:ceiling4:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_ceiling4) {channel="miio:basic:ceiling4:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling4) {channel="miio:basic:ceiling4:colorMode"}
String name "Name" (G_ceiling4) {channel="miio:basic:ceiling4:name"}
Switch ambientPower "Ambient Power" (G_ceiling4) {channel="miio:basic:ceiling4:ambientPower"}
Color ambientColor "Ambient Color" (G_ceiling4) {channel="miio:basic:ceiling4:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_ceiling4) {channel="miio:basic:ceiling4:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_ceiling4) {channel="miio:basic:ceiling4:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_ceiling4) {channel="miio:basic:ceiling4:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_ceiling4) {channel="miio:basic:ceiling4:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_ceiling4) {channel="miio:basic:ceiling4:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight HaoShi LED Ceiling Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Haoshi Ceiling Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "LED Ceiling Light Crystal Plus" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight HaoShi LED Ceiling Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Crystal Pendant Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_light) {channel="miio:basic:light:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_light) {channel="miio:basic:light:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (ceiling10) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_ceiling10 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling10) {channel="miio:basic:ceiling10:power"}
Dimmer brightness "Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling10) {channel="miio:basic:ceiling10:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_ceiling10) {channel="miio:basic:ceiling10:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling10) {channel="miio:basic:ceiling10:colorMode"}
String name "Name" (G_ceiling10) {channel="miio:basic:ceiling10:name"}
Switch ambientPower "Ambient Power" (G_ceiling10) {channel="miio:basic:ceiling10:ambientPower"}
Color ambientColor "Ambient Color" (G_ceiling10) {channel="miio:basic:ceiling10:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_ceiling10) {channel="miio:basic:ceiling10:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_ceiling10) {channel="miio:basic:ceiling10:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_ceiling10) {channel="miio:basic:ceiling10:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_ceiling10) {channel="miio:basic:ceiling10:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_ceiling10) {channel="miio:basic:ceiling10:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light 320 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Stylized Ceiling Light  Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light Mini" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light 480 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Xingyu Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight ShaoHua Celing Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_light) {channel="miio:basic:light:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_light) {channel="miio:basic:light:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (ceiling19) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_ceiling19 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling19) {channel="miio:basic:ceiling19:power"}
Dimmer brightness "Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling19) {channel="miio:basic:ceiling19:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_ceiling19) {channel="miio:basic:ceiling19:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling19) {channel="miio:basic:ceiling19:colorMode"}
String name "Name" (G_ceiling19) {channel="miio:basic:ceiling19:name"}
Switch ambientPower "Ambient Power" (G_ceiling19) {channel="miio:basic:ceiling19:ambientPower"}
Color ambientColor "Ambient Color" (G_ceiling19) {channel="miio:basic:ceiling19:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_ceiling19) {channel="miio:basic:ceiling19:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_ceiling19) {channel="miio:basic:ceiling19:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_ceiling19) {channel="miio:basic:ceiling19:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_ceiling19) {channel="miio:basic:ceiling19:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_ceiling19) {channel="miio:basic:ceiling19:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_light) {channel="miio:basic:light:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_light) {channel="miio:basic:light:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (ceiling20) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_ceiling20 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling20) {channel="miio:basic:ceiling20:power"}
Dimmer brightness "Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling20) {channel="miio:basic:ceiling20:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_ceiling20) {channel="miio:basic:ceiling20:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling20) {channel="miio:basic:ceiling20:colorMode"}
String name "Name" (G_ceiling20) {channel="miio:basic:ceiling20:name"}
Switch ambientPower "Ambient Power" (G_ceiling20) {channel="miio:basic:ceiling20:ambientPower"}
Color ambientColor "Ambient Color" (G_ceiling20) {channel="miio:basic:ceiling20:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_ceiling20) {channel="miio:basic:ceiling20:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_ceiling20) {channel="miio:basic:ceiling20:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_ceiling20) {channel="miio:basic:ceiling20:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_ceiling20) {channel="miio:basic:ceiling20:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_ceiling20) {channel="miio:basic:ceiling20:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Living Room Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Ceiling Light (350mm)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Jade Smart LED Ceiling Light C2001" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Ceiling Light (350mm)" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}
Switch flex_switch "Flex Switch" (G_light) {channel="miio:basic:light:flex_switch"}
Number init_power_opt "Power-On State" (G_light) {channel="miio:basic:light:init_power_opt"}
Number save_state "Remember Last State" (G_light) {channel="miio:basic:light:save_state"}
Number fast_scene_switch "Fast Scene Switching" (G_light) {channel="miio:basic:light:fast_scene_switch"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Smart Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Arwen Ceiling Light D" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_light) {channel="miio:basic:light:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_light) {channel="miio:basic:light:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Color Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Bulb (Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi LED Smart Bulb (White and Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Bulb 1S(Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Bulb Essential (White and Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Smart LED Bulb 1SE (color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Smart LED Bulb W3 (color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight GU10 Smart Bulb W1 (Multicolor)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Bulb (Tunable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Smart Bulb W3 (Tunable White)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Smart Ceiling Fan S2001" <status>
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Light - Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color_temperature"}
Number flow "Light - Flow" (G_light) {channel="miio:basic:light:flow"}
Number:Time off_delay_time "Light - Off Delay" (G_light) {channel="miio:basic:light:off_delay_time"}
Number:Time left_time "Light - Remaining Off Delay" (G_light) {channel="miio:basic:light:left_time"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number fan_level "Fan - Level" (G_light) {channel="miio:basic:light:fan_level"}
Number mode1 "Fan - Mode" (G_light) {channel="miio:basic:light:mode1"}
Number status "Fan - Status" (G_light) {channel="miio:basic:light:status"}
Number fault "Fan - Device Fault" (G_light) {channel="miio:basic:light:fault"}
Number:Time off_delay_time1 "Fan - Off Delay" (G_light) {channel="miio:basic:light:off_delay_time1"}
Number:Time left_time1 "Fan - Remaining Off Delay" (G_light) {channel="miio:basic:light:left_time1"}
Number init_power_opt "Light - Power-On State" (G_light) {channel="miio:basic:light:init_power_opt"}
Switch smart_switch_en "Light - Wall Switch Control" (G_light) {channel="miio:basic:light:smart_switch_en"}
Number miband_sleep_ctrl "Light - Mi Band Sleep Control" (G_light) {channel="miio:basic:light:miband_sleep_ctrl"}
Number fan_init_power_opt "Fan - Power-On State" (G_light) {channel="miio:basic:light:fan_init_power_opt"}
Switch smart_switch_en1 "Fan - Wall Switch Control" (G_light) {channel="miio:basic:light:smart_switch_en1"}
Number:Dimensionless fan_speed "Fan - Speed" (G_light) {channel="miio:basic:light:fan_speed"}
Number:Time sleep_delay_off "Fan - Sleep Delay Off" (G_light) {channel="miio:basic:light:sleep_delay_off"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi LED Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Desk Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi LED Desk Lamp 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Smart Desk Lamp Prime" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Light Sensor Desk Lamp V1" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Star LED Table Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Star Floor Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Screen Light Bar" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number:Temperature ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Switch ambientColorflow "Ambient Color Flow" (G_light) {channel="miio:basic:light:ambientColorflow"}
String ambientColorflowScene "Ambient Color Flow Scene" (G_light) {channel="miio:basic:light:ambientColorflowScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight White Bulb v2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Bulb 1S(Dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Filament Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Mi Smart LED Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED smart bulb W3(dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight GU10 Smart Bulb W1(dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Whiteglow Panel Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Lightstrip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Lightstrip Plus" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight Willow LED Lightstrip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Lightstrip 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yeelight LED Lightstrip 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Xiaomi Smart Lightstrip" <status>
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Color color "Color" (G_light) {channel="miio:basic:light:color"}
Number init_power_opt "Power-On State" (G_light) {channel="miio:basic:light:init_power_opt"}
Number save_state "Remember Last State" (G_light) {channel="miio:basic:light:save_state"}
Number strip_length "Strip Length" (G_light) {channel="miio:basic:light:strip_length"}
Switch length_detected "Length Detected" (G_light) {channel="miio:basic:light:length_detected"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Light Group (Mi & Yeelight)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String colorflowScene "Color Flow Scene" (G_light) {channel="miio:basic:light:colorflowScene"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_switch "Yeelight Smart Dual Control Module" <status>
Switch on "Switch 1" (G_switch) {channel="miio:basic:switch:on"}
Number default_power "Switch 1 - Power-On State" (G_switch) {channel="miio:basic:switch:default_power"}
Number:Time off_delay "Switch 1 - Off Delay" (G_switch) {channel="miio:basic:switch:off_delay"}
Switch on1 "Switch 2" (G_switch) {channel="miio:basic:switch:on1"}
Number default_power1 "Switch 2 - Power-On State" (G_switch) {channel="miio:basic:switch:default_power1"}
Number:Time off_delay1 "Switch 2 - Off Delay" (G_switch) {channel="miio:basic:switch:off_delay1"}
Switch interlock "Interlock" (G_switch) {channel="miio:basic:switch:interlock"}
Switch smart_switch "Smart Switch Mode" (G_switch) {channel="miio:basic:switch:smart_switch"}
String remote_list "Paired Remotes" (G_switch) {channel="miio:basic:switch:remote_list"}

Yilai Ceiling Light Aiyue 480 (yilai.light.ceiling1) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yilai Ceiling Light Aiyue 480" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

Yilai Ceiling Lamp Hefeng 430 (yilai.light.ceiling2) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yilai Ceiling Lamp Hefeng 430" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

Yilai Ceiling Lamp Hefeng Pro (yilai.light.ceiling3) item file lines ​

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_light "Yilai Ceiling Lamp Hefeng Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Dimmer nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}
Switch nightlightMode "Night Light Mode" (G_light) {channel="miio:basic:light:nightlightMode"}

Xiaomi Smart Kettle 2 Pro (yunmi.kettle.v19) item file lines ​

note: Autogenerated example. Replace the id (kettle) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_kettle "Xiaomi Smart Kettle 2 Pro" <status>
Number status "Status" (G_kettle) {channel="miio:basic:kettle:status"}
Number fault "Fault" (G_kettle) {channel="miio:basic:kettle:fault"}
Number:Temperature temperature "Water Temperature" (G_kettle) {channel="miio:basic:kettle:temperature"}
String heating "Heating" (G_kettle) {channel="miio:basic:kettle:heating"}
Number:Temperature target_temperature "Target Temperature" (G_kettle) {channel="miio:basic:kettle:target_temperature"}
Number target_mode "Mode" (G_kettle) {channel="miio:basic:kettle:target_mode"}
Switch auto_keep_warm "Keep Warm" (G_kettle) {channel="miio:basic:kettle:auto_keep_warm"}
Number:Temperature keep_warm_temperature "Keep Warm Temperature" (G_kettle) {channel="miio:basic:kettle:keep_warm_temperature"}
Number:Time keep_warm_time "Keep Warm Time" (G_kettle) {channel="miio:basic:kettle:keep_warm_time"}
Number:Time warming_time "Keep Warm Elapsed Time" (G_kettle) {channel="miio:basic:kettle:warming_time"}
Switch kettle_lifting "Kettle Lifted" (G_kettle) {channel="miio:basic:kettle:kettle_lifting"}
Switch no_disturb "Do Not Disturb" (G_kettle) {channel="miio:basic:kettle:no_disturb"}
Switch custom_knob_temp "Custom Knob Temperature" (G_kettle) {channel="miio:basic:kettle:custom_knob_temp"}
Switch lift_remember_temp "Remember Temperature After Lifting" (G_kettle) {channel="miio:basic:kettle:lift_remember_temp"}
Switch boiling_reminder "Boiling Reminder" (G_kettle) {channel="miio:basic:kettle:boiling_reminder"}
Switch keep_warm_reminder "Keep Warm Reminder" (G_kettle) {channel="miio:basic:kettle:keep_warm_reminder"}

Mi Water Purifier lx2 (yunmi.waterpuri.lx2) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier lx2" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx3) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier (Under Counter)" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier lx4 (yunmi.waterpuri.lx4) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier lx4" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier 1A/400G Pro (yunmi.waterpuri.lx5) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier 1A/400G Pro" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Temperature temperature "Inlet Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number:Dimensionless tds_warn_thd "TDS Warning Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx6) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier (Under Counter)" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier 500G/500G Pro (yunmi.waterpuri.lx7) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier 500G/500G Pro" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Temperature temperature "Inlet Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number:Dimensionless tds_warn_thd "TDS Warning Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier 600G (yunmi.waterpuri.lx8) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier 600G" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}
String filter_reset "Reset Filter" (G_waterpuri) {channel="miio:basic:waterpuri:filter_reset"}

Mi Water Purifier D1 (yunmi.waterpuri.lx9) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier D1" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Temperature temperature "Inlet Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number:Dimensionless tds_warn_thd "TDS Warning Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Switch uv_working "UV Sterilization" (G_waterpuri) {channel="miio:basic:waterpuri:uv_working"}
Switch plmachine "Pipeline Machine Support" (G_waterpuri) {channel="miio:basic:waterpuri:plmachine"}

Mi Water Purifier lx10 (yunmi.waterpuri.lx10) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier lx10" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Temperature temperature "Inlet Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number:Dimensionless tds_warn_thd "TDS Warning Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Switch uv_working "UV Sterilization" (G_waterpuri) {channel="miio:basic:waterpuri:uv_working"}
Switch plmachine "Pipeline Machine Support" (G_waterpuri) {channel="miio:basic:waterpuri:plmachine"}

Mi Water Purifier C1 (Triple Setting) (yunmi.waterpuri.lx11) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier C1 (Triple Setting)" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Temperature temperature "Inlet Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number:Dimensionless tds_warn_thd "TDS Warning Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Switch uv_working "UV Sterilization" (G_waterpuri) {channel="miio:basic:waterpuri:uv_working"}
Switch plmachine "Pipeline Machine Support" (G_waterpuri) {channel="miio:basic:waterpuri:plmachine"}

Mi Water Purifier S1 (yunmi.waterpuri.lx12) item file lines ​

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpuri "Mi Water Purifier S1" <status>
Number run_status "Error Code" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Switch rinse "Rinsing" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number:Temperature temperature "Inlet Water Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number:Dimensionless tds_warn_thd "TDS Warning Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Switch uv_working "UV Sterilization" (G_waterpuri) {channel="miio:basic:waterpuri:uv_working"}
Switch plmachine "Pipeline Machine Support" (G_waterpuri) {channel="miio:basic:waterpuri:plmachine"}

Mi Water Purifier v1 (yunmi.waterpurifier.v1) item file lines ​

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpurifier "Mi Water Purifier v1" <status>
Number run_status "Error Code" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Switch rinse "Rinsing" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpurifier) {channel="miio:basic:waterpurifier:filter_reset"}

Mi Water Purifier v2 (yunmi.waterpurifier.v2) item file lines ​

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpurifier "Mi Water Purifier v2" <status>
Number run_status "Error Code" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Switch rinse "Rinsing" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpurifier) {channel="miio:basic:waterpurifier:filter_reset"}

Mi Water Purifier (Under sink) v3 (yunmi.waterpurifier.v3) item file lines ​

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpurifier "Mi Water Purifier (Under sink) v3" <status>
Number run_status "Error Code" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Switch rinse "Rinsing" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpurifier) {channel="miio:basic:waterpurifier:filter_reset"}

Mi Water Purifier v4 (yunmi.waterpurifier.v4) item file lines ​

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_waterpurifier "Mi Water Purifier v4" <status>
Number run_status "Error Code" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Switch rinse "Rinsing" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number:Dimensionless tds_in "TDS In" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number:Dimensionless tds_out "TDS Out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number:Time f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number:Time f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number:Time f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number:Time f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number:Time f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number:Time f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number:Time f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number:Time f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number:Time maintenance_interval "Unused Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
String filter_reset "Reset Filter" (G_waterpurifier) {channel="miio:basic:waterpurifier:filter_reset"}

Smartmi Ventilation System (zhimi.airfresh.va2) item file lines ​

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airfresh "Smartmi Ventilation System" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Number:Dimensionless humidity "Humidity" (G_airfresh) {channel="miio:basic:airfresh:humidity"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Switch child_lock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:child_lock"}
Switch alarm "Notification Sound" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Number:Density aqi "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:aqi"}
Number:Density average_aqi "Average PM2.5" (G_airfresh) {channel="miio:basic:airfresh:average_aqi"}
Number:Time filter_hours "Filter Hours Used" (G_airfresh) {channel="miio:basic:airfresh:filter_hours"}
Number:Time used_hours "Run Time" (G_airfresh) {channel="miio:basic:airfresh:used_hours"}
Number motor_speed "Motor Speed" (G_airfresh) {channel="miio:basic:airfresh:motor_speed"}
Number led_level "Indicator Light Brightness" (G_airfresh) {channel="miio:basic:airfresh:led_level"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

Smartmi Fresh Air System (Heating) (zhimi.airfresh.va4) item file lines ​

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airfresh "Smartmi Fresh Air System (Heating)" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Number:Dimensionless humidity "Humidity" (G_airfresh) {channel="miio:basic:airfresh:humidity"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Switch child_lock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:child_lock"}
Switch alarm "Notification Sound" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Number:Density aqi "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:aqi"}
Number:Density average_aqi "Average PM2.5" (G_airfresh) {channel="miio:basic:airfresh:average_aqi"}
Number:Time filter_hours "Filter Hours Used" (G_airfresh) {channel="miio:basic:airfresh:filter_hours"}
Number:Time used_hours "Run Time" (G_airfresh) {channel="miio:basic:airfresh:used_hours"}
Number motor_speed "Motor Speed" (G_airfresh) {channel="miio:basic:airfresh:motor_speed"}
Number led_level "Indicator Light Brightness" (G_airfresh) {channel="miio:basic:airfresh:led_level"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

Mi Fresh Air Ventilator C1-80 (zhimi.airfresh.ua1) item file lines ​

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airfresh "Mi Fresh Air Ventilator C1-80" <status>
String actions "Actions" (G_airfresh) {channel="miio:basic:airfresh:actions"}
Switch on "Power" (G_airfresh) {channel="miio:basic:airfresh:on"}
Number fault "Fault" (G_airfresh) {channel="miio:basic:airfresh:fault"}
Number fan_level "Fan Level" (G_airfresh) {channel="miio:basic:airfresh:fan_level"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
Number:Time filter_used_time "Filter Used Time" (G_airfresh) {channel="miio:basic:airfresh:filter_used_time"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airfresh) {channel="miio:basic:airfresh:filter_life_level"}
Switch physical_controls_locked "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:physical_controls_locked"}
Switch alarm "Notification Sound" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Dimmer brightness "Indicator Light Brightness" (G_airfresh) {channel="miio:basic:airfresh:brightness"}
Number motor_a_speed_rpm "Motor A Speed" (G_airfresh) {channel="miio:basic:airfresh:motor_a_speed_rpm"}
Number motor_b_speed_rpm "Motor B Speed" (G_airfresh) {channel="miio:basic:airfresh:motor_b_speed_rpm"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

Mi PM2.5 Air Quality Monitor (zhimi.airmonitor.v1) item file lines ​

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airmonitor "Mi PM2.5 Air Quality Monitor" <status>
Switch power "Power" (G_airmonitor) {channel="miio:basic:airmonitor:power"}
Number aqi "Air Quality Index" (G_airmonitor) {channel="miio:basic:airmonitor:aqi"}
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Switch usb_state "USB Power Connected" (G_airmonitor) {channel="miio:basic:airmonitor:usb_state"}
Switch time_state "Show Clock" (G_airmonitor) {channel="miio:basic:airmonitor:time_state"}
Switch night_state "Night Mode" (G_airmonitor) {channel="miio:basic:airmonitor:night_state"}
Number night_begin "Night Mode Start Time" (G_airmonitor) {channel="miio:basic:airmonitor:night_begin"}
Number night_end "Night Mode End Time" (G_airmonitor) {channel="miio:basic:airmonitor:night_end"}

Xiaomi Smart Air Purifier 4 Compact (zhimi.airp.cpa4) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4 Compact" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Air Purifier - Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number motor_speed_rpm "Custom Service - Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number country_code "Custom Service - Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number favorite_level "Custom Service - Favorite Level" (G_airp) {channel="miio:basic:airp:favorite_level"}

Mi Air Purifier 3/3H (zhimi.airp.mb3a) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Mi Air Purifier 3/3H" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_max_time "Filter Maximum Life" (G_airp) {channel="miio:basic:airp:filter_max_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Number brightness "LED Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number motor_set_speed "Motor Target Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Number:Time use_time "Device Use Time" (G_airp) {channel="miio:basic:airp:use_time"}
Number:Volume purify_volume "Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Average AQI" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "AQI State" (G_airp) {channel="miio:basic:airp:aqi_state"}
Switch bottom_door "Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number manual_level "Manual Mode Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}

Mi Air Purifier 3C (zhimi.airp.mb4a) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Mi Air Purifier 3C" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
String fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number motor_speed_rpm "Custom Service - Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
String miio_lib_version "Custom Service - Miio Lib Version" (G_airp) {channel="miio:basic:airp:miio_lib_version"}
Number favorite_speed "Custom Service - Favorite Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}

Xiaomi Smart Air Purifier 4 (zhimi.airp.mb5) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch anion "Anion (Negative Ion)" (G_airp) {channel="miio:basic:airp:anion"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter Remaining Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number motor_set_speed "Motor Target Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Switch bottom_door "Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number manual_level "Manual Mode Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number:Volume purify_volume "Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Average AQI" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "AQI State" (G_airp) {channel="miio:basic:airp:aqi_state"}

Xiaomi Smart Air Purifier 4 (zhimi.airp.mb5a) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch anion "Anion (Negative Ion)" (G_airp) {channel="miio:basic:airp:anion"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter Remaining Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number motor_set_speed "Motor Target Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Switch bottom_door "Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number manual_level "Manual Mode Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number:Volume purify_volume "Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Average AQI" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "AQI State" (G_airp) {channel="miio:basic:airp:aqi_state"}

Xiaomi Smart Air Purifier Elite (zhimi.airp.meb1) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier Elite" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch plasma "Plasma Ionizer" (G_airp) {channel="miio:basic:airp:plasma"}
Switch uv "UV Light" (G_airp) {channel="miio:basic:airp:uv"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Density pm10_density "PM10 Density" (G_airp) {channel="miio:basic:airp:pm10_density"}
Number air_quality "Air Quality" (G_airp) {channel="miio:basic:airp:air_quality"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}

Xiaomi Smart Air Purifier 4 Lite (zhimi.airp.rmb1) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4 Lite" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number temperature_display_unit "Device Display Unit - Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Custom Service - Moto Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number country_code "Custom Service - Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number favorite_level "Custom Service - Favorite Level" (G_airp) {channel="miio:basic:airp:favorite_level"}

Xiaomi Smart Air Purifier 4 Pro (zhimi.airp.va2) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4 Pro" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch anion "Anion (Negative Ion)" (G_airp) {channel="miio:basic:airp:anion"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter Remaining Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number motor_set_speed "Motor Target Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Switch bottom_door "Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number manual_level "Manual Mode Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number:Volume purify_volume "Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Average AQI" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "AQI State" (G_airp) {channel="miio:basic:airp:aqi_state"}

Xiaomi Smart Air Purifier 4 Pro (zhimi.airp.va2a) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4 Pro" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch anion "Anion (Negative Ion)" (G_airp) {channel="miio:basic:airp:anion"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter Remaining Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Notification Sound" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Child Lock" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number motor_speed_rpm "Motor Speed" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number motor_set_speed "Motor Target Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_level "Favorite Mode Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Switch bottom_door "Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number manual_level "Manual Mode Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number iic_error_count "I2C Error Count" (G_airp) {channel="miio:basic:airp:iic_error_count"}
Number:Volume purify_volume "Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Average AQI" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "AQI State" (G_airp) {channel="miio:basic:airp:aqi_state"}

Xiaomi Smart Air Purifier 4 Pro (zhimi.airp.vb4) item file lines ​

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airp "Xiaomi Smart Air Purifier 4 Pro" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
Number fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number fan_level "Air Purifier - Fan Level" (G_airp) {channel="miio:basic:airp:fan_level"}
Switch anion "Air Purifier - Anion" (G_airp) {channel="miio:basic:airp:anion"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airp) {channel="miio:basic:airp:relative_humidity"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airp) {channel="miio:basic:airp:temperature"}
Number:Density pm10_density "Environment - PM10 Density" (G_airp) {channel="miio:basic:airp:pm10_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_airp) {channel="miio:basic:airp:filter_left_time"}
Switch alarm "Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Switch physical_controls_locked "Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number brightness "Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Number temperature_display_unit "Temperature Display Unit" (G_airp) {channel="miio:basic:airp:temperature_display_unit"}
Number motor_speed_rpm "Motor Speed Rpm" (G_airp) {channel="miio:basic:airp:motor_speed_rpm"}
Number favorite_speed "Favorite Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number motor_set_speed "Motor Set Speed" (G_airp) {channel="miio:basic:airp:motor_set_speed"}
Number favorite_level "Favorite Level" (G_airp) {channel="miio:basic:airp:favorite_level"}
Switch bottom_door "Bottom Door" (G_airp) {channel="miio:basic:airp:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airp) {channel="miio:basic:airp:reboot_cause"}
Number manual_level "Manual Level" (G_airp) {channel="miio:basic:airp:manual_level"}
Number country_code "Country Code" (G_airp) {channel="miio:basic:airp:country_code"}
Number:Volume purify_volume "Aqi - Purify Volume" (G_airp) {channel="miio:basic:airp:purify_volume"}
Number average_aqi "Aqi - Average Aqi" (G_airp) {channel="miio:basic:airp:average_aqi"}
Number aqi_state "Aqi - Aqi State" (G_airp) {channel="miio:basic:airp:aqi_state"}

Mi Air Purifier 2 (mini) (zhimi.airpurifier.m1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2 (mini)" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2 (zhimi.airpurifier.m2) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2S (zhimi.airpurifier.ma1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2S (zhimi.airpurifier.ma2) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Dimmer bright "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:bright"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number purifyvolume "Purivied Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 3 (zhimi.airpurifier.ma4) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 3" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Number fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan_level"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Number:Time filter_max_time "Filter Maximum Life" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
Number motor_set_speed "Motor Target Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_set_speed"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}
Number favorite_level "Favorite Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Device Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number:Volume purify_volume "Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Average AQI" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number aqi_state "AQI State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_state"}
Switch bottom_door "Bottom Door" (G_airpurifier) {channel="miio:basic:airpurifier:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number iic_error_count "I2C Error Count" (G_airpurifier) {channel="miio:basic:airpurifier:iic_error_count"}
Number manual_level "Manual Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual_level"}

Mi Air Purifier 2S (zhimi.airpurifier.mb1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 3/3H" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Number fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan_level"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Number:Time filter_max_time "Filter Maximum Life" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
Number motor_set_speed "Motor Target Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_set_speed"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}
Number favorite_level "Favorite Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Device Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number:Volume purify_volume "Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Average AQI" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number aqi_state "AQI State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_state"}
Switch bottom_door "Bottom Door" (G_airpurifier) {channel="miio:basic:airpurifier:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number iic_error_count "I2C Error Count" (G_airpurifier) {channel="miio:basic:airpurifier:iic_error_count"}
Number manual_level "Manual Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual_level"}
Number country_code "Country Code" (G_airpurifier) {channel="miio:basic:airpurifier:country_code"}
Number temperature_display_unit "Temperature Display Unit" (G_airpurifier) {channel="miio:basic:airpurifier:temperature_display_unit"}

Mi Air Purifier 3C (zhimi.airpurifier.mb4) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 3C" <status>
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
String fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "Screen Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
String miio_lib_version "MIIO Library Version" (G_airpurifier) {channel="miio:basic:airpurifier:miio_lib_version"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}

Mi Air Purifier 2S (zhimi.airpurifier.mc1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier 2H (zhimi.airpurifier.mc2) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier 2H" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Xiaomi Smart Air Purifier 4 Lite (zhimi.airpurifier.rma1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Xiaomi Smart Air Purifier 4 Lite" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Number:Time filter_left_time "Filter Left Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_left_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number brightness "Screen Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
Number favorite_level "Favorite Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}

Mi Air Purifier Super (zhimi.airpurifier.sa1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier Super" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier MAX / MAX Pro (zhimi.airpurifier.sa2) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier MAX / MAX Pro" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v1 (zhimi.airpurifier.v1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier v1" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Dimmer brightness "Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch act_det "Air AutoDetect" (G_airpurifier) {channel="miio:basic:airpurifier:act_det"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number filterlive "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlive"}

Mi Air Purifier v2 (zhimi.airpurifier.v2) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier v2" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v3 (zhimi.airpurifier.v3) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier v3" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier v5 (zhimi.airpurifier.v5) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier v5" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Pro v6 (zhimi.airpurifier.v6) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier Pro v6" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Dimmer bright "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:bright"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number purifyvolume "Purivied Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Pro v7 (zhimi.airpurifier.v7) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier Pro v7" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Number volume "Volume" (G_airpurifier) {channel="miio:basic:airpurifier:volume"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Number illuminance "Illuminance" (G_airpurifier) {channel="miio:basic:airpurifier:illuminance"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number motorspeed2 "Motor Speed 2" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed2"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

Mi Air Purifier Pro H (zhimi.airpurifier.va1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier Pro H" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Number fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan_level"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Number:Time filter_max_time "Filter Maximum Life" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
Number motor_set_speed "Motor Target Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_set_speed"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}
Number favorite_level "Favorite Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Device Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number:Volume purify_volume "Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Average AQI" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number aqi_state "AQI State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_state"}
Switch bottom_door "Bottom Door" (G_airpurifier) {channel="miio:basic:airpurifier:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number manual_level "Manual Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual_level"}

Mi Air Purifier Pro H (zhimi.airpurifier.vb2) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Mi Air Purifier Pro H" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Number fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan_level"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Number:Time filter_max_time "Filter Maximum Life" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
Number motor_set_speed "Motor Target Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_set_speed"}
Number favorite_speed "Favorite Mode Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}
Number favorite_level "Favorite Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Device Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number:Volume purify_volume "Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Average AQI" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number aqi_state "AQI State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_state"}
Switch bottom_door "Bottom Door" (G_airpurifier) {channel="miio:basic:airpurifier:bottom_door"}
Number reboot_cause "Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number manual_level "Manual Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual_level"}

Smartmi Air Purifier (zhimi.airpurifier.za1) item file lines ​

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_airpurifier "Smartmi Air Purifier" <status>
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fault "Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number air_quality "TVOC Air Quality" (G_airpurifier) {channel="miio:basic:airpurifier:air_quality"}
Number:Density pm2_5_density "PM2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Number:Time filter_max_time "Filter Maximum Life" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Switch alarm "Notification Sound" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number motor_speed_rpm "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed_rpm"}
Number favorite_level "Favorite Mode Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Device Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number:Volume purify_volume "Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Average AQI" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number reboot_cause "Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number country_code "Country Code" (G_airpurifier) {channel="miio:basic:airpurifier:country_code"}
Switch gesture_status "Gesture Recognition" (G_airpurifier) {channel="miio:basic:airpurifier:gesture_status"}

Mi Standing Fan (zhimi.fan.sa1) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Standing Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Mi Smart Fan (zhimi.fan.v1) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Mi Smart Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number:Temperature temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge State" (G_fan) {channel="miio:basic:fan:mode"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Smartmi DC Pedestal Fan (zhimi.fan.v2) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Smartmi DC Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number:Temperature temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge State" (G_fan) {channel="miio:basic:fan:mode"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Smartmi DC Pedestal Fan (zhimi.fan.v3) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Smartmi DC Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number:Temperature temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge State" (G_fan) {channel="miio:basic:fan:mode"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Smartmi Inverter Pedestal Fan (zhimi.fan.za1) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Smartmi Inverter Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Smartmi Standing Fan 2 (zhimi.fan.za3) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Smartmi Standing Fan 2" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Smartmi Standing Fan 2S (zhimi.fan.za4) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Smartmi Standing Fan 2S" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Dimmer speedLevel "Fan Speed" (G_fan) {channel="miio:basic:fan:speedLevel"}
Dimmer naturalLevel "Natural Wind Speed" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch angleEnable "Oscillation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Angle angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Notification Sound" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "Indicator Light" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speed "Motor Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}

Smartmi Standing Fan 3 (zhimi.fan.za5) item file lines ​

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_fan "Smartmi Standing Fan 3" <status>
Switch on "Power" (G_fan) {channel="miio:basic:fan:on"}
Dimmer speed_level "Fan Speed" (G_fan) {channel="miio:basic:fan:speed_level"}
Number fan_level "Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Oscillation" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number:Angle horizontal_angle "Oscillation Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}
Number:Time off_delay "Power-Off Timer" (G_fan) {channel="miio:basic:fan:off_delay"}
Switch alarm "Notification Sound" (G_fan) {channel="miio:basic:fan:alarm"}
Dimmer brightness "Screen Brightness" (G_fan) {channel="miio:basic:fan:brightness"}
Switch physical_controls_locked "Child Lock" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Switch anion "Negative Ion Mode" (G_fan) {channel="miio:basic:fan:anion"}
Switch temperature_sensing "Temperature-Sensing Mode" (G_fan) {channel="miio:basic:fan:temperature_sensing"}
Number:Temperature temperature "Temperature" (G_fan) {channel="miio:basic:fan:temperature"}
Number:Dimensionless relative_humidity "Humidity" (G_fan) {channel="miio:basic:fan:relative_humidity"}
Number speed_now "Motor Speed" (G_fan) {channel="miio:basic:fan:speed_now"}
Number button_press "Button Pressed" (G_fan) {channel="miio:basic:fan:button_press"}
Switch battery_state "Battery Installed" (G_fan) {channel="miio:basic:fan:battery_state"}
Switch ac_state "AC Power Connected" (G_fan) {channel="miio:basic:fan:ac_state"}

Mi Smart Space Heater S (zhimi.heater.ma2) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Mi Smart Space Heater S" <status>
Switch on "Heater - Switch Status" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch hw_enable "Private Service - Hw Enable" (G_heater) {channel="miio:basic:heater:hw_enable"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}

Mi Smart Baseboard Heater E (zhimi.heater.ma3) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Mi Smart Baseboard Heater E" <status>
String actions "Actions" (G_heater) {channel="miio:basic:heater:actions"}
Switch on "Heater - Switch Status" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}

Mi Smart Space Heater S (zhimi.heater.mc2) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Mi Smart Space Heater S" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch hw_enable "Private Service - Hw Enable" (G_heater) {channel="miio:basic:heater:hw_enable"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}
Number country_code "Private Service - Country Code" (G_heater) {channel="miio:basic:heater:country_code"}

Smartmi Smart Fan (zhimi.heater.na1) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Smartmi Smart Fan" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number heat_level "Heater - Heat Level" (G_heater) {channel="miio:basic:heater:heat_level"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch return_to_middle "Private Service - Return To Middle" (G_heater) {channel="miio:basic:heater:return_to_middle"}

Smartmi Smart Fan Heater (zhimi.heater.nb1) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Smartmi Smart Fan Heater" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number heat_level "Heater - Heat Level" (G_heater) {channel="miio:basic:heater:heat_level"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch return_to_middle "Private Service - Return To Middle" (G_heater) {channel="miio:basic:heater:return_to_middle"}
Number country_code "Private Service - Country Code" (G_heater) {channel="miio:basic:heater:country_code"}
Switch hw_en "Private Service - Hw En" (G_heater) {channel="miio:basic:heater:hw_en"}

Smartmi Radiant Heater Smart Version (zhimi.heater.za1) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Smartmi Radiant Heater Smart Version" <status>
Switch power "Power" (G_heater) {channel="miio:basic:heater:power"}
Number:Temperature target_temperature "Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Dimmer brightness "Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch buzzer "Buzzer Status" (G_heater) {channel="miio:basic:heater:buzzer"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_heater) {channel="miio:basic:heater:relative_humidity"}
Switch childlock "Child Lock" (G_heater) {channel="miio:basic:heater:childlock"}
Switch HWSwitch "HW Switch" (G_heater) {channel="miio:basic:heater:HWSwitch"}
Number:Temperature temperature "Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number:Time usedhours "Run Time" (G_heater) {channel="miio:basic:heater:usedhours"}

Smartmi Smart Convector Heater 1S (zhimi.heater.za2) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Smartmi Smart Convector Heater 1S" <status>
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target-temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown-time"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_heater) {channel="miio:basic:heater:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Controls Locked" (G_heater) {channel="miio:basic:heater:physical-controls-locked"}
Number:Time use_time "Private-Service - Use Time" (G_heater) {channel="miio:basic:heater:use-time"}

Smartmi Smart Convector Heater 1S (zhimi.heater.zb1) item file lines ​

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_heater "Smartmi Smart Convector Heater 1S" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target-temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown-time"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_heater) {channel="miio:basic:heater:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Controls Locked" (G_heater) {channel="miio:basic:heater:physical-controls-locked"}
Number:Time use_time "Private-Service - Use Time" (G_heater) {channel="miio:basic:heater:use-time"}
Number country_code "Private-Service - Country-Code" (G_heater) {channel="miio:basic:heater:country-code"}

Smartmi Evaporative Humidifier (zhimi.humidifier.ca1) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number led_brightness "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number:Dimensionless water_level "Water Level" (G_humidifier) {channel="miio:basic:humidifier:water_level"}
Switch dry "Air Drying Mode" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Switch clean "Clean Mode" (G_humidifier) {channel="miio:basic:humidifier:clean"}
Number:Time use_time "Run Time" (G_humidifier) {channel="miio:basic:humidifier:use_time"}
Number speed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:speed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}

Smartmi Evaporative Humidifer 2 (zhimi.humidifier.ca4) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Smartmi Evaporative Humidifer 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless water_level "Water Level" (G_humidifier) {channel="miio:basic:humidifier:water_level"}
Number led_brightness "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch dry "Air Drying Mode" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time use_time "Run Time" (G_humidifier) {channel="miio:basic:humidifier:use_time"}
Number:Time power_time "Power-On Time" (G_humidifier) {channel="miio:basic:humidifier:power_time"}
Number target_speed "Target Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:target_speed"}
Number speed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:speed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}
Switch clean "Clean Mode" (G_humidifier) {channel="miio:basic:humidifier:clean"}

Smartmi Evaporative Humidifier 3 (zhimi.humidifier.ca6) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Smartmi Evaporative Humidifier 3" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number fault "Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number water_level "Water Level" (G_humidifier) {channel="miio:basic:humidifier:water_level"}
Switch dry "Air Drying Mode" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number status "Status" (G_humidifier) {channel="miio:basic:humidifier:status"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number led_brightness "Screen Brightness" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}
Number speed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:speed"}
Switch clean "Clean Mode" (G_humidifier) {channel="miio:basic:humidifier:clean"}
Number:Time clean_time_left "Self-Cleaning Time Left" (G_humidifier) {channel="miio:basic:humidifier:clean_time_left"}

Smartmi Evaporative Humidifier (zhimi.humidifier.cb1) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number led_brightness "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number:Dimensionless water_level "Water Level" (G_humidifier) {channel="miio:basic:humidifier:water_level"}
Switch dry "Air Drying Mode" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time use_time "Run Time" (G_humidifier) {channel="miio:basic:humidifier:use_time"}
Number speed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:speed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}

Smartmi Evaporative Humidifier (zhimi.humidifier.cb2) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number led_brightness "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number:Dimensionless water_level "Water Level" (G_humidifier) {channel="miio:basic:humidifier:water_level"}
Switch dry "Air Drying Mode" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time use_time "Run Time" (G_humidifier) {channel="miio:basic:humidifier:use_time"}
Number speed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:speed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}

Smartmi Humidifier (zhimi.humidifier.v1) item file lines ​

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_humidifier "Smartmi Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless target_humidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number aqi "Air Quality Index" (G_humidifier) {channel="miio:basic:humidifier:aqi"}
Number trans_level "Transmission Level" (G_humidifier) {channel="miio:basic:humidifier:trans_level"}
Number led_brightness "Indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led_brightness"}
Switch buzzer "Notification Sound" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number:Time use_time "Run Time" (G_humidifier) {channel="miio:basic:humidifier:use_time"}
Number speed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:speed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch child_lock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:child_lock"}

Mi Smart Power Strip (zimi.powerstrip.v2) item file lines ​

note: Autogenerated example. Replace the id (powerstrip) in the channel with your own. Replace basic with generic in the Thing UID depending on how your Thing was discovered.

dsl
Group G_powerstrip "Mi Smart Power Strip" <status>
Switch power "Power" (G_powerstrip) {channel="miio:basic:powerstrip:power"}
Number:Power electric_power "Active Power" (G_powerstrip) {channel="miio:basic:powerstrip:electric_power"}
Switch led "Indicator Light" (G_powerstrip) {channel="miio:basic:powerstrip:led"}
Number power_price "Power Price" (G_powerstrip) {channel="miio:basic:powerstrip:power_price"}
Number:ElectricCurrent electric_current "Current" (G_powerstrip) {channel="miio:basic:powerstrip:electric_current"}
Number:Temperature temperature "Temperature" (G_powerstrip) {channel="miio:basic:powerstrip:temperature"}
Switch lp_autooff "Low Power Auto Off" (G_powerstrip) {channel="miio:basic:powerstrip:lp_autooff"}
Number:Time lp_autooff_delay "Low Power Delay" (G_powerstrip) {channel="miio:basic:powerstrip:lp_autooff_delay"}
Number:Power lp_threshold "Low Power Threshold" (G_powerstrip) {channel="miio:basic:powerstrip:lp_threshold"}

Country Servers ​

Known country Servers: cn, de, i2, ru, sg, us

Mapping of countries in mihome app to server:

CountryCountry CodeServer
AfghanistanAFsg
AlbaniaALde
AlgeriaDZsg
American SamoaASsg
AndorraADde
AngolaAOsg
AnguillaAIus
AntarcticaAQsg
Antigua and BarbudaAGus
ArgentinaARus
ArmeniaAMsg
ArubaAWus
Ascension IslandACsg
AustraliaAUsg
AustriaATde
AzerbaijanAZsg
BahamasBSus
BahrainBHsg
BangladeshBDsg
BarbadosBBus
BelarusBYde
BelgiumBEde
BelizeBZus
BeninBJsg
BermudaBMus
BhutanBTsg
BoliviaBOus
Bosnia and HerzegovinaBAde
BotswanaBWsg
Bouvet IslandBVsg
BrazilBRus
British Indian Ocean TerritoryIOsg
British Virgin IslandsVGus
BruneiBNsg
BulgariaBGde
Burkina FasoBFsg
BurundiBIsg
CambodiaKHsg
CameroonCMsg
CanadaCAus
Canary IslandsICsg
Cape VerdeCVsg
Cayman IslandsKYus
Central African RepublicCFsg
Ceuta and MelillaEAde
ChadTDsg
ChileCLus
Chinese mainlandCNcn
Christmas IslandCXsg
Cocos IslandsCCsg
ColombiaCOus
ComorosKMsg
Congo - BrazzavilleCGsg
Congo - KinshasaCDsg
Cook IslandsCKsg
Costa RicaCRus
CroatiaHRde
CuraçaoCWus
CyprusCYde
CzechiaCZde
Côte d'IvoireCIsg
DenmarkDKde
Diego GarciaDGsg
DjiboutiDJsg
DominicaDMus
Dominican RepublicDOus
Dutch CaribbeanBQus
EcuadorECus
EgyptEGsg
El SalvadorSVus
Equatorial GuineaGQsg
EritreaERsg
EstoniaEEde
EthiopiaETsg
Falkland IslandsFKus
Faroe IslandsFOde
FijiFJsg
FinlandFIde
FranceFRde
French GuianaGFde
French Southern TerritoriesTFsg
French polynesiaPFsg
GabonGAsg
GambiaGMsg
GeorgiaGEsg
GermanyDEde
GhanaGHsg
GibraltarGIde
GreeceGRde
GreenlandGLus
GrenadaGDus
GuadeloupeGPus
GuamGUsg
GuatemalaGTus
GuernseyGGde
GuineaGNsg
Guinea-BissauGWsg
GuyanaGYus
HaitiHTus
HondurasHNus
Hong KongHKsg
HungaryHUde
IcelandISde
IndiaINi2
IndonesiaIDsg
IraqIQsg
IrelandIEde
Isle of ManIMde
IsraelILsg
ItalyITde
JamaicaJMus
JapanJPsg
JerseyJEde
JordanJOsg
KazakhstanKZsg
KenyaKEsg
KiribatiKIsg
KosovoXKde
KuwaitKWsg
KyrgyzstanKGsg
LaosLAsg
LatviaLVde
LebanonLBsg
LesothoLSsg
LiberiaLRsg
LibyaLYsg
LiechtensteinLIde
LithuaniaLTde
LuxembourgLUde
MacaoMOsg
MacedoniaMKde
MadagascarMGsg
MalawiMWsg
MalaysiaMYsg
MaldivesMVsg
MaliMLsg
MaltaMTde
Marshall islandsMHsg
MartiniqueMQus
MauritaniaMRsg
MauritiusMUsg
MayotteYTsg
MexicoMXus
MicronesiaFMsg
MoldovaMDde
MonacoMCde
MongoliaMNsg
MontenegroMEde
MontserratMSus
MoroccoMAsg
MozambiqueMZsg
Myanmar (Burma)MMsg
NamibiaNAsg
NauruNRsg
NepalNPsg
NetherlandsNLde
New CaledoniaNCsg
New ZealandNZsg
NicaraguaNIus
NigerNEsg
NigeriaNGsg
NiueNUsg
Norfolk IslandNFsg
Northern Mariana IslandsMPsg
NorwayNOde
OmanOMsg
PakistanPKsg
PalauPWsg
Palestinian TerritoriesPSsg
PanamaPAus
Papua New GuineaPGsg
ParaguayPYus
PeruPEus
PhilippinesPHsg
Pitcairn IslandsPNsg
PolandPLde
PortugalPTde
Puerto RicoPRus
QatarQAsg
RomaniaROde
RussiaRUru
RwandaRWsg
RéunionREsg
Saint BarthélemyBLus
Saint HelenaSHsg
Saint Kitts and NevisKNus
Saint LuciaLCus
Saint MartinMFde
Saint Pierre and MiquelonPMus
Saint Vincent and The GrenadinesVCus
SamoaWSsg
San MarinoSMde
Saudi ArabiaSAsg
SenegalSNsg
SerbiaRSde
SeychellesSCsg
Sierra LeoneSLsg
SingaporeSGsg
SlovakiaSKde
SloveniaSIde
Solomon IslandsSBsg
SomaliaSOsg
South AfricaZAsg
South Georgia and South Sandwich IslandsGSus
South KoreaKRsg
South SudanSSsg
SpainESde
Sri LankaLKsg
SurinameSRus
Svalbard and Jan MayenSJde
SwazilandSZsg
SwedenSEde
SwitzerlandCHde
São Tomé and PríncipeSTsg
TaiwanTWsg
TajikistanTJsg
TanzaniaTZsg
ThailandTHsg
Timor-LesteTLsg
TogoTGsg
TokelauTKsg
TongaTOsg
Trinidad and TobagoTTus
Tristan da CunhaTAsg
TunisiaTNsg
TurkeyTRsg
TurkmenistanTMsg
Turks and Caicos IslandsTCus
TuvaluTVsg
U.S. Virgin IslandsVIus
UgandaUGsg
UkraineUAde
United Arab EmiratesAEsg
United KingdomGBde
United StatesUSus
United States Minor Outlying IslandsUMus
UruguayUYus
UzbekistanUZsg
VanuatuVUsg
VaticanVAde
VietnamVNsg
Wallis and FutunaWFsg
Western SaharaEHsg
YemenYEsg
ZambiaZMsg
ZimbabweZWsg
Åland IslandsAXde