Skip to content

MercedesMe Binding ​

This binding provides access to your Mercedes Benz vehicle like Mercedes Me Smartphone App.

Supported Things ​

TypeIDDescription
BridgeaccountConnect your Mercedes Me account
ThingcombustionConventional fuel vehicle
ThinghybridFuel vehicle with supporting electric engine
ThingbevBattery electric vehicle

Discovery ​

The Mercedes Me binding is based on the API of the Smartphone App. You have an account which is associated to one or more vehicles. Setup the Mercedes Me Account Bridge with your email address and password. After successful authorization your associated vehicles are found automatically. There's no manual discovery!

Bridge Configuration ​

Bridge needs configuration in order to connect properly to your Mercedes Me account.

NameTypeDescriptionDefaultRequired
emailtextEmail address for MercedesMe accountN/Ayes
passwordtextPassword for MercedesMe accountN/Ayes
pintextMercedes Me Smartphone App PINN/Ano
regiontextYour regionEUyes
refreshIntervalintegerAPI refresh interval15yes

Set region to your location

  • EU : Europe and Rest of World
  • NA : North America
  • AP : Asia Pacific
  • CN : China

Set pin to your Mercedes Me App PIN. Parameter is not required. Note pin is needed for some commands which are affecting vehicle safety. Commands like unlock doors will result into an unsafe state: your vehicle is unlocked and is accessible to everybody.

Commands protected by PIN

  • Remote Starting Vehicle
  • Unlock Doors
  • Open / Ventilate Windows
  • Open / Lift Sunroof

Every refreshInterval all values get updated.

If the vehicle is driving or charging during the refresh from refreshInterval the bridge provides live updates. That means that a subset of values get updated much quicker outside the refreshInterval from then on. These live updates are only available as long as the vehicle is driving or charging.

A small refreshInterval is very likely to result in a temporarily ban - the default is a reasonable choice.

Thing Configuration ​

NameTypeDescriptionDefaultRequiredAdvanced
vintextVehicle Identification NumberN/Ayesno

For all vehicles you're free to give the fuel / battery capacity. Giving these values in configuration open fuel / charge capacities are reported in the range channels.

NameTypeDescriptionDefaultRequiredAdvancedcombustionbevhybrid
batteryCapacitydecimalBattery CapacityN/AnonoXX
fuelCapacitydecimalFuel CapacityN/AnonoXX

Channels ​

Channels are separated in groups:

Channel Group IDDescription
vehicleVehicle Information
doorsDetails of all Doors
lockDoors Lock Status
windowsWindow Details
hvacClimatization
serviceService & Warnings
rangeRanges, Charge and Fuel
chargeCharging Data and Programs
tripTrip Data
positionPositioning Data
tiresTire Information

Vehicle ​

Group name: vehicle

ChannelTypeDescriptionReadWriteAdvanced
lockNumberLock Status and ControlXX
windowsNumberWindow Status and ControlXX
door-statusNumberDoor StatusX
ignitionNumberIgnitionXX
park-brakeSwitchPark Brake ActiveX
feature-capabilitiesStringFeature CapabilitiesXX
command-capabilitiesStringCommand CapabilitiesXX
proto-updateStringLast Vehicle Data UpdateXX

Advanced channels are used to identify problems. If you encounter problems with this binding follow the instructions from Troubleshooting section.

Lock Status Mapping ​

State

  • 2 : Locked
  • 0 : Unlocked

Command

  • 2 : Lock
  • 0 : Unlock

Triggers DOORSLOCK and DOORSUNLOCK from Command Name Mapping

Window Mappings ​

State

  • 0 : Intermediate
  • 1 : Closed
  • 2 : Open

Command

  • 0 : Ventilate
  • 1 : Close
  • 2 : Open

Triggers WINDOWVENTILATE, WINDOWCLOSE and WINDOWOPEN from Command Name Mapping

Door Status Mapping ​

  • 0 : Open
  • 1 : Closed

Ignition Mapping ​

State

  • 0 : Off
  • 2 : Ready
  • 4 : On

Command

  • 0 : Off
  • 4 : On

Triggers ENGINESTART and ENGINESTOP from Command Name Mapping

Doors ​

Group name: doors

State representing if door, roof, hoods or flaps are open. States and controls are depending on your vehicle capabilities.

ChannelTypeDescriptionReadWrite
front-leftContactFront Left DoorX
front-rightContactFront Right DoorX
rear-leftContactRear Left DoorX
rear-rightContactRear Right DoorX
deck-lidContactDeck lidX
engine-hoodContactEngine HoodX
rooftopNumberRoof topX
sunroof-front-blindNumberSunroof Front BlindX
sunroof-rear-blindNumberSunroof Rear BlindX
sunroofNumberSun roofXX

Rooftop Mapping ​

  • 0 : Unlocked
  • 1 : Open and locked
  • 2 : Closed and locked

Sunroof Front Blind Mapping ​

  • not available yet

Sunroof Rear Blind Mapping ​

  • not available yet

Sunroof Mapping ​

State

  • 0 : Closed
  • 1 : Open
  • 2 : Lifted
  • 3 : Running
  • 4 : Closing
  • 5 : Opening
  • 6 : Closing

Command

  • 0 : Close
  • 1 : Open
  • 2 : Lift

Triggers ROOFCLOSE, ROOFOPEN and ROOFLIFT from Command Name Mapping

Lock ​

Group name: lock

State representing if doors, hoods or flaps are locked. States and controls are depending on your vehicle capabilities and type.

ChannelTypeDescriptionReadWrite
front-leftSwitchFront Left Door LockX
front-rightSwitchFront Right Door LockX
rear-leftSwitchRear Left Door LockX
rear-rightSwitchRear Right Door LockX
deck-lidSwitchDeck lidX
gas-flapSwitchGas Flap (combustion & hybrid)X

Windows ​

Group name: windows

State representing current window position.

ChannelTypeDescriptionReadWrite
front-leftNumberFront Left WindowX
front-rightNumberFront Right WindowX
rear-leftNumberRear Left WindowX
rear-rightNumberRear Right WindowX
rear-right-blindNumberRear Right BlindX
rear-left-blindNumberRear Left BlindX
rear-blindNumberRear BlindX

Window Channel Mapping ​

  • 0 : Intermediate
  • 1 : Open
  • 2 : Closed
  • 3 : Airing
  • 4 : Intermediate
  • 5 : Running

Rear Right Blind Channel Mapping ​

  • not available yet

Rear Left Blind Channel Mapping ​

  • not available yet

Rear Blind Channel Mapping ​

  • not available yet

Flip Window Channel Mapping ​

  • not available yet

HVAC ​

Group name: havc

Configuration of vehicle climatization. States and controls are depending on your vehicle capabilities.

ChannelTypeDescriptionReadWrite
front-leftSwitchAC Seat Front LeftX
front-rightSwitchAC Seat Front RightX
rear-leftSwitchAC Seat Rear LeftX
rear-rightSwitchAC Seat Rear RightX
zoneNumberAC ZoneXX
temperatureNumber:TemperatureAC Desired TemperatureXX
activateSwitchAC Precondition ControlXX
ac-statusNumberAC Precondition StatusX
aux-heatSwitchAuxiliary HeatingXX
aux-statusNumberAuxiliary StatusX

Zone Mapping ​

Command Options

  • 1 : frontLeft
  • 2 : frontRight
  • 3 : frontCenter
  • 4 : rearLeft
  • 5 : rearRight
  • 6 : rearCenter
  • 7 : rear2Left
  • 8 : rear2Right
  • 9 : rear2Center

Automatically calculated based on your vehicle capabilities. Only options are shown which are supported by your vehicle.

Triggers - PRECONDCONFIGURESEATS from Command Name Mapping

Temperature Setting ​

Pre-configure selected zone with desired temperature. Minimum and maximum temperature depends on your local settings either Degree Celsius or Fahrenheit.

Celsius

  • Minimum : 16 °C
  • Maximum : 28 °C
  • Step width : 0.5 °C

Fahrenheit

  • Minimum : 60 °F
  • Maximum : 84 °F
  • Step width : 1 °F

Triggers TEMPERATURECONFIGURE from Command Name Mapping

AC Precondition Control ​

Triggers PRECONDSTART and PRECONDSTOP from Command Name Mapping

AC Precondition Status Mapping ​

  • 0 : No Request
  • 1 : Battery or Fuel Low
  • 2 : Available after Restart Engine
  • 3 : Not Possible, Charging not Finished
  • 4 : General Error</option>

Auxiliary Heating Switch ​

Triggers AUXHEATSTART and AUXHEATSTOP from Command Name Mapping

Auxiliary Status Mapping ​

  • 0 : None
  • 1 : No Budget
  • 2 : Budget Empty
  • 4 : System Error
  • 8 : Running Error
  • 16 : Fuel on Reserve
  • 32 : Reserve Reached
  • 64 : Low Voltage
  • 128 : Low Voltage Operation
  • 256 : Communication Error

Service ​

Group name: service

All channels read-only. Service and warning information for vehicle. States and controls are depending on your vehicle capabilities.

ChannelTypeDescriptionbevhybridcombustion
starter-batteryNumberStarter Battery StatusXXX
brake-fluidSwitchBrake Fluid WarningXXX
brake-lining-wearSwitchBrake Lining Gear WarningXXX
wash-waterSwitchWash Water Low WarningXXX
coolant-fluidSwitchCoolant Fluid Low WarningXX
engineSwitchEngine WarningXX
tires-rdkNumberTire Pressure WarningsXXX
service-daysNumberNext Service in x daysXXX
service-distanceNumber:LengthNext Service in x kmXXX

Note: Vehicles report the service interval either in days or in kilometres, never both. The attribute the vehicle does not use is flagged as not available, so only one of the two channels carries a value while the other stays UNDEF. Check which channel is populated for your vehicle and use that one - or evaluate both in a rule.

Starter Battery Mapping ​

Traffic light status of the starter battery

  • 0 : Green
  • 1 : Yellow
  • 2 : Red
  • 3 : Service Disabled
  • 4 : Vehicle Not Available

Tire Pressure Warnings Mapping ​

  • 0 : No warning
  • 1 : Soft warning
  • 2 : Low warning
  • 3 : Deflation
  • 4 : Unknown warning

Range ​

Group name: range

All channels read-only.

ChannelTypeDescriptionbevhybridcombustion
mileageNumber:LengthTotal MileageXXX
home-distanceNumber:LengthDistance to HomeXXX
socNumber:DimensionlessBattery State of ChargeXX
chargedNumber:EnergyCharged Battery EnergyXX
unchargedNumber:EnergyUncharged Battery EnergyXX
energy-to-max-socNumber:EnergyEnergy to Maximum SoCXX
range-electricNumber:LengthElectric RangeXX
radius-electricNumber:LengthElectric Radius for MapXX
fuel-levelNumber:DimensionlessFuel Level in PercentXX
fuel-remainNumber:VolumeRemaining FuelXX
fuel-openNumber:VolumeOpen Fuel CapacityXX
range-fuelNumber:LengthFuel RangeXX
radius-fuelNumber:LengthFuel Radius for MapXX
range-hybridNumber:LengthHybrid RangeX
radius-hybridNumber:LengthHybrid Radius for MapX
adblue-levelNumber:DimensionlessAdBlue tank level in percentX

Channels with radius are just giving a guess which radius can be reached in a map display.

Charge ​

Group name: charge

Only relevant for battery electric and hybrid vehicles. Current charge values and charge program configuration. States and controls are depending on your vehicle capabilities.

ChannelTypeDescriptionReadWrite
charge-flapNumberCharge Flap StatusX
coupler-acNumberCoupler AC StatusX
coupler-dcNumberCoupler DC StatusX
coupler-lockNumberCoupler Lock StatusX
activeSwitchCharging ActiveX
statusNumberCharge StatusX
errorNumberCharge ErrorX
powerNumber:PowerCurrent Charging PowerX
end-timeDateTimeEstimated Charging EndX
programNumberSelected Charge ProgramXX
max-socNumber:DimensionlessMaximum State of ChargeXX
auto-unlockSwitchAuto Unlock Coupler after chargingXX

Charge Flap Mapping ​

  • 0 : Open
  • 1 : Closed

Coupler AC Mapping ​

  • 0 : Plugged
  • 2 : Unplugged

Coupler DC Mapping ​

  • 0 : Plugged
  • 2 : Unplugged

Coupler Lock Mapping ​

  • 0 : Locked
  • 1 : Unlocked

Charge Status Mapping ​

  • 0 : Charging
  • 1 : End of Charge
  • 2 : Charge Break
  • 3 : Charge Cable Unplugged
  • 4 : Charging Failure
  • 5 : Slow Charging
  • 6 : Fast Charging
  • 7 : Discharging
  • 8 : Not charging
  • 9 : Slow Charging after reaching trip target
  • 10 : Charging after reaching trip target
  • 11 : Fast Charging after reaching trip target
  • 12 : Connected
  • 13 : AC Charging
  • 14 : DC Charging
  • 15 : Battery calibration active
  • 16 : Unknown

Charge Error Mapping ​

  • 0 : None
  • 1 : Cable
  • 2 : Charging Disorder
  • 3 : Charging Station
  • 4 : Charging Type

Program Mapping ​

  • 0 : DEFAULT_CHARGE_PROGRAM
  • 2 : HOME_CHARGE_PROGRAM
  • 3 : WORK_CHARGE_PROGRAM

Automatically calculated based on your vehicle capabilities. Only options are shown which are supported by your vehicle.

Triggers CHARGEPROGRAMCONFIGURE from Command Name Mapping

Max SoC Setting ​

SoC target for selected program can be configured if your vehicle capabilities are supporting it. Configuration limit needs to respect 10% steps with a minimum of 50% and maximum of 100%.

Command Options

  • 50 %
  • 60 %
  • 70 %
  • 80 %
  • 90 %
  • 100 %

Triggers CHARGEPROGRAMCONFIGURE from Command Name Mapping

Auto Unlock Setting ​

Charge Program can be configured to release coupler lock after target SoC is reached

Triggers CHARGEPROGRAMCONFIGURE from Command Name Mapping

Trip ​

Group name: trip

All channels read-only

ChannelTypeDescription
distanceNumber LengthLast Trip Distance
timeStringLast Trip Duration in days, hours and minutes
avg-speedNumber:SpeedLast Trip Average Speed in km/h
cons-evNumberLast Trip Average Electric Energy Consumption
cons-convNumberLast Trip Average Fuel Consumption
distance-resetNumber LengthSince Reset Trip Distance
time-resetStringSince Reset Duration in days, hours and minutes
avg-speed-resetNumber:SpeedSince Reset Average Speed in km/h
cons-ev-resetNumberSince Reset Average Electric Energy Consumption
cons-conv-resetNumber:VolumeSince Reset Average Fuel Consumption
cons-ev-unitStringUnit of Average Electric Consumption
cons-conv-unitStringUnit of Average Fuel Consumption

Average Consumption ​

You can configure different average consumption units like kWh per 100 kilometer or km per kWh. In your Mercedes Me App front page

  • Burger Menu top left
  • Last Entry Settings
  • First Entry Units
Electric Consumption Units

Trip Duration ​

Shown as String in format d days, HH:mm. If duration is below 24 hours format is HH:mm.

ECO Score ​

Group name: eco

All channels read-only

ChannelTypeDescription
accelNumber:DimensionlessAcceleration Score
coastingNumber:DimensionlessCoasting Score
constantNumber:DimensionlessConstant Score
bonusNumber:LengthBonus Range

The Mercedes ECO Score is aimed to improve your driving behavior.

  • Acceleration Score: smooth acceleration e.g. use eco driving setting
  • Coasting Score: ideally use only recuperation instead of brake
  • Constant Score: drive at constant speed e.g. use cruise control
  • Bonus Range: assumed bonus range vs. a very sportive driver

Position ​

Group name: position

ChannelTypeDescriptionReadWrite
headingNumber:AngleHeading of VehicleX
gpsPointGPS Location Point of VehicleX
statusNumberStatus PositioningX
signalNumberRequest Light or Horn Signal to find VehicleX

Status Mapping ​

  • 0 : Unknown
  • 1 : Service Inactive
  • 2 : Tracking Inactive
  • 3 : Parked
  • 4 : Ignition On
  • 5 : Ok

Signal Settings ​

Command Options

  • 0 : Position Lights
  • 1 : Position Horn

Triggers SIGPOSSTART from Command Name Mapping

Tires ​

Group name: tires

All channels read-only

ChannelTypeDescription
pressure-front-leftNumber:PressureTire Pressure Front Left
pressure-front-rightNumber:PressureTire Pressure Front Right
pressure-rear-leftNumber:PressureTire Pressure Rear Left
pressure-rear-rightNumber:PressureTire Pressure Rear Right
sensor-availableNumberTire Sensor Available
marker-front-leftNumberTire Marker Front Left
marker-front-rightNumberTire Marker Front Right
marker-rear-leftNumberTire Marker Rear Left
marker-rear-rightNumberTire Marker Rear Right
last-updateDateTimeTimestamp of last Measurement

Sensor Available Mapping ​

  • 0 : All Sensors Located
  • 1 : 1-3 Sensors are Missing
  • 2 : All Sensors Missing
  • 3 : System Error

Tire Marker Mapping ​

  • 0 : No warning
  • 1 : Soft warning
  • 2 : Low warning
  • 3 : Deflation
  • 4 : Unknown warning

Commands ​

Group name: command

All channels read-only

ChannelTypeDescription
cmd-nameNumberCommand Name which is handled
cmd-stateNumberCurrent Command State
cmd-last-updateDateTimeTimestamp of last update

Show state of the send command sent by above channels which are able to write values. Don't flood the API with commands. The Mercedes API cannot withstand Monkey Testing. Send lock/unlock or temperatures in a short period of time will result in failures.

Command Name Mapping ​

  • 100 : DOORSLOCK
  • 110 : DOORSUNLOCK
  • 115 : TRUNKUNLOCK
  • 116 : FUELFLAPUNLOCK
  • 117 : CHARGEFLAPUNLOCK
  • 118 : CHARGECOUPLERUNLOCK
  • 300 : AUXHEATSTART
  • 310 : AUXHEATSTOP
  • 320 : AUXHEATCONFIGURE
  • 350 : TEMPERATURECONFIGURE
  • 400 : PRECONDSTART
  • 410 : PRECONDSTOP
  • 420 : PRECONDCONFIGURE
  • 425 : PRECONDCONFIGURESEATS
  • 550 : ENGINESTART
  • 560 : ENGINESTOP
  • 570 : ENGINEAVPSTART
  • 770 : SIGPOSSTART
  • 1100 : WINDOWOPEN
  • 1110 : WINDOWCLOSE
  • 1120 : WINDOWVENTILATE
  • 1121 : WINDOWMOVE
  • 1130 : ROOFOPEN
  • 1140 : ROOFCLOSE
  • 1150 : ROOFLIFT
  • 1151 : ROOFMOVE
  • 2000 : BATTERYMAXSOC
  • 2010 : BATTERYCHARGEPROGRAM
  • 2020 : CHARGEPROGRAMCONFIGURE

Command State Mapping ​

  • 0 : UNKNOWN_COMMAND_STATE
  • 1 : INITIATION
  • 2 : ENQUEUED
  • 3 : PROCESSING
  • 4 : WAITING
  • 5 : FINISHED
  • 6 : FAILED

Vehicle Actions ​

Actions for vehicle thing are provided.

sendPOI ​

Send a Point of Interest (POI) to the vehicle message box. This POI can be used as navigation destination.

ParameterTypeDescriptionMandatory
titleStringPOI titleX
latitudedoublelatitude of POIX
longitudedoublelongitude of POIX
cityStringPOI city location
streetStringPOI street name
postalCodeStringPOI postal code

Example Eiffel Tower ​

Required information

rules
val mercedesmeActions = getActions("mercedesme","mercedesme:bev:4711:eqa")
mercedesmeActions.sendPOI("Eiffel Tower",48.85957476434348,2.2939068084684853)

Full information

rules
val mercedesmeActions = getActions("mercedesme","mercedesme:bev:4711:eqa")
mercedesmeActions.sendPOI("Eiffel Tower",48.85957476434348,2.2939068084684853,"Paris","Av. Gustave Eiffel", "75007")

forceUpdate ​

Requests vehicle data immediately, outside the configured refreshInterval. The refresh interval restarts afterwards, so the next regular update happens again refreshInterval minutes later. Vehicle data is requested for the whole account. A force update is logged with TRACE level.

Be careful using this action in rules. Frequent use can force the server to reject updates with a HTTP 429 response and can lock the access for several hours!

rules
val mercedesmeActions = getActions("mercedesme","mercedesme:bev:4711:eqa")
mercedesmeActions.forceUpdate()

Discover your Vehicle ​

There's a big variety of vehicles with different features and different command capabilities. During discovery the capabilities of your vehicle are identified. They are stored in Vehicle Properties as shown below. You can check in beforehand if features like Charge Program Configuration or HVAC Configuration are supported or not.

Screenshot showing vehicle capabilities in openHAB

If you want to dive deeper see Troubleshooting feature-capabilities and command-capabilities to evaluate the exact capabilities.

Troubleshooting ​

In order to be able to analyze problems 3 advanced channels are placed in the vehicle group.

  • feature-capabilities - showing which feature your vehicle is equipped with
  • command-capabilities - showing which commands can be sent to your vehicle
  • proto-update - latest update of your vehicle data

In case you find problems regarding this binding add items to these 3 channels. The items are reporting Strings in JSON format. Vehicle Identification Number (VIN) isn't part of data. GPS data which is showing your location is anonymized. Please double check yourself no critical data is inside. The content of these items shall be used to create a problem report. During development the proto-update contains an entry with binding version information.

json
"bindingInfo": {
    "oh-bundle": "4.1.0.202309241814",
    "version": "2.2-alpha",
    "vehicle": "mercedesme:bev"
}

Keep these 3 channels disconnected during normal operation.

Log output is anonymized as well: a VIN is printed with its last 4 characters only and GPS positions are replaced by placeholders.

Full Example ​

Things file ​

dsl
Bridge mercedesme:account:4711   "Mercedes Me John Doe" [ email="YOUR_MAIL_ADDRESS", region="EU", pin=9876, refreshToken="abc", refreshInterval=15] {
         Thing bev eqa           "Mercedes EQA"        [ vin="VEHICLE_VIN", batteryCapacity=66.5]
}

Items file ​

dsl
Number                  EQA_DoorLock                {channel="mercedesme:bev:4711:eqa:vehicle#lock" }
Number                  EQA_Windows                 {channel="mercedesme:bev:4711:eqa:vehicle#windows" }
Number                  EQA_DoorStatus              {channel="mercedesme:bev:4711:eqa:vehicle#door-status" }
Number                  EQA_Ignition                {channel="mercedesme:bev:4711:eqa:vehicle#ignition" }
Number                  EQA_ParkBrake               {channel="mercedesme:bev:4711:eqa:vehicle#park-brake" }

Contact                 EQA_FrontLeftDoor           {channel="mercedesme:bev:4711:eqa:doors#front-left" }
Contact                 EQA_FrontRightDoor          {channel="mercedesme:bev:4711:eqa:doors#front-right" }
Contact                 EQA_RearLeftDoor            {channel="mercedesme:bev:4711:eqa:doors#rear-left" }
Contact                 EQA_RearRightDoor           {channel="mercedesme:bev:4711:eqa:doors#rear-right" }
Contact                 EQA_DeckLid                 {channel="mercedesme:bev:4711:eqa:doors#deck-lid" }
Contact                 EQA_EngineHood              {channel="mercedesme:bev:4711:eqa:doors#engine-hood" }
Number                  EQA_Sunroof                 {channel="mercedesme:bev:4711:eqa:doors#sunroof" }

Switch                  EQA_FrontLeftLock           {channel="mercedesme:bev:4711:eqa:lock#front-left" }
Switch                  EQA_FrontRightLock          {channel="mercedesme:bev:4711:eqa:lock#front-right" }
Switch                  EQA_RearLeftLock            {channel="mercedesme:bev:4711:eqa:lock#rear-left" }
Switch                  EQA_RearRightLock           {channel="mercedesme:bev:4711:eqa:lock#rear-right" }
Switch                  EQA_DeckLidLock             {channel="mercedesme:bev:4711:eqa:lock#deck-lid" }

Number                  EQA_FrontLeftWindow         {channel="mercedesme:bev:4711:eqa:windows#front-left" }
Number                  EQA_FrontRightWindow        {channel="mercedesme:bev:4711:eqa:windows#front-right" }
Number                  EQA_RearLeftWindow          {channel="mercedesme:bev:4711:eqa:windows#rear-left" }
Number                  EQA_RearRightWindow         {channel="mercedesme:bev:4711:eqa:windows#rear-right" }

Number                  EQA_ACZone                  {channel="mercedesme:bev:4711:eqa:hvac#zone" }
Number                  EQA_ACTemperature           {channel="mercedesme:bev:4711:eqa:hvac#temperature" }
Number                  EQA_ACControl               {channel="mercedesme:bev:4711:eqa:hvac#active" }

Number                  EQA_StarterBattery          {channel="mercedesme:bev:4711:eqa:service#starter-battery" }
Switch                  EQA_BrakeFluid              {channel="mercedesme:bev:4711:eqa:service#brake-fluid" }
Switch                  EQA_BrakeLiningWear         {channel="mercedesme:bev:4711:eqa:service#brake-lining-wear" }
Switch                  EQA_WashWater               {channel="mercedesme:bev:4711:eqa:service#wash-water" }
Number                  EQA_TirePressureWarn        {channel="mercedesme:bev:4711:eqa:service#tires-rdk" }
Number                  EQA_ServiceInDays           {channel="mercedesme:bev:4711:eqa:service#service-days" }
Number:Length           EQA_ServiceInDistance       {channel="mercedesme:bev:4711:eqa:service#service-distance", stateDescription=" " [pattern="%d %unit%", readOnly=true], unit="km"}

Number:Length           EQA_Mileage                 {channel="mercedesme:bev:4711:eqa:range#mileage", stateDescription=" " [pattern="%d %unit%", readOnly=true], unit="km"}
Number:Length           EQA_Range                   {channel="mercedesme:bev:4711:eqa:range#range-electric", stateDescription=" " [pattern="%d %unit%", readOnly=true], unit="km"}
Number:Length           EQA_RangeRadius             {channel="mercedesme:bev:4711:eqa:range#radius-electric", stateDescription=" " [pattern="%d %unit%", readOnly=true], unit="km"}
Number:Dimensionless    EQA_SoC                     {channel="mercedesme:bev:4711:eqa:range#soc", stateDescription=" " [pattern="%.0f %unit%", readOnly=true], unit="%"}
Number:Energy           EQA_BatteryCharged          {channel="mercedesme:bev:4711:eqa:range#charged", stateDescription=" " [pattern="%.2f %unit%", readOnly=true], unit="kWh"}
Number:Energy           EQA_BatteryUncharged        {channel="mercedesme:bev:4711:eqa:range#uncharged", stateDescription=" " [pattern="%.2f %unit%", readOnly=true], unit="kWh"}

Number                  EQA_ChargeFlap              {channel="mercedesme:bev:4711:eqa:charge#charge-flap" }
Number                  EQA_CouplerLock             {channel="mercedesme:bev:4711:eqa:charge#coupler-lock" }
Switch                  EQA_ChargeActive            {channel="mercedesme:bev:4711:eqa:charge#active" }
Number:Power            EQA_ChargePower             {channel="mercedesme:bev:4711:eqa:charge#power", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="kW"}
DateTime                EQA_ChargeTimeEstimate      {channel="mercedesme:bev:4711:eqa:charge#end-time" }
Number                  EQA_ChargeProgram           {channel="mercedesme:bev:4711:eqa:charge#program" }
Number:Dimensionless    EQA_ProgramMaxSoc           {channel="mercedesme:bev:4711:eqa:charge#max-soc", stateDescription=" " [pattern="%.0f %unit%", readOnly=false], unit="%"}

Number:Length           EQA_TripDistance            {channel="mercedesme:bev:4711:eqa:trip#distance", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="km"}
String                  EQA_TripDuration            {channel="mercedesme:bev:4711:eqa:trip#time" }
Number:Speed            EQA_TripAvgSpeed            {channel="mercedesme:bev:4711:eqa:trip#avg-speed", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="km/h"}
Number                  EQA_TripAvgConsumption      {channel="mercedesme:bev:4711:eqa:trip#cons-ev" }
String                  EQA_AvgConsumptionUnit      {channel="mercedesme:bev:4711:eqa:trip#cons-ev-unit" }

Number:Angle            EQA_Heading                 {channel="mercedesme:bev:4711:eqa:position#heading", stateDescription=" " [pattern="%d %unit%", readOnly=true], unit="°"}
Location                EQA_GPSLocation             {channel="mercedesme:bev:4711:eqa:position#gps" }
Number                  EQA_Signal                  {channel="mercedesme:bev:4711:eqa:position#signal" }

Number:Pressure         EQA_PressureFrontLeft       {channel="mercedesme:bev:4711:eqa:tires#pressure-front-left", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="bar"}
Number:Pressure         EQA_PressureFrontRight      {channel="mercedesme:bev:4711:eqa:tires#pressure-front-right", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="bar"}
Number:Pressure         EQA_PressureRearLeft        {channel="mercedesme:bev:4711:eqa:tires#pressure-rear-left", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="bar"}
Number:Pressure         EQA_PressureRearRight       {channel="mercedesme:bev:4711:eqa:tires#pressure-rear-right", stateDescription=" " [pattern="%.1f %unit%", readOnly=true], unit="bar"}
DateTime                EQA_MeasurementTime         {channel="mercedesme:bev:4711:eqa:tires#last-update" }

Number                  EQA_CommandName             {channel="mercedesme:bev:4711:eqa:command#cmd-name" }
Number                  EQA_CommandState            {channel="mercedesme:bev:4711:eqa:command#cmd-state" }
DateTime                EQA_CommandTimestamp        {channel="mercedesme:bev:4711:eqa:command#cmd-last-update" }

POI ruleExample ​

rules
// send POI from JSON String item
rule "Send POI"
    when
        Item POIJsonString changed
    then
        // decode JSON
        val json = POIJsonString.state.toString
        val title = transform("JSONPATH", "$.title", json)
        val lat = transform("JSONPATH", "$.latitude", json)
        val lon = transform("JSONPATH", "$.longitude", json)

        // send POI to vehicle
        val mercedesmeActions = getActions("mercedesme","mercedesme:bev:4711:eqa")
        mercedesmeActions.sendPoi(title,lat,lon)
end