Skip to content

Intesis Binding ​

This binding connects to WiFi IntesisHome devices using their local REST Api and to IntesisBox devices using TCP connection.

Supported Things ​

This binding only supports one Thing type:

ThingThing TypeDescription
intesisHomeThingRepresents a single IntesisHome WiFi device
intesisBoxThingRepresents a single IntesisBox WiFi device

Discovery ​

Intesis devices do not support auto discovery.

Thing Configuration ​

The binding uses the following configuration parameters.

ParameterValid for ThingTypeDescription
ipAddressBothIP-Address of the device
passwordIntesisHomePassword to login to the local webserver of IntesisHome device
portIntesisBoxTCP port to connect to IntesisBox device, defaults to 3310
pollingIntervalBothInterval to retrieve updates from the connected devices

Channels ​

Channel IDItem TypeDescriptionPossible Values
powerSwitchTurns power on/off for your climate system.ON,OFF
modeStringThe heating/cooling mode.AUTO,HEAT,DRY,FAN,COOL
fanSpeedStringFan speed (if applicable)AUTO,1-10
vanesUpDownStringControl of up/down vanes (if applicable)AUTO,1-9,SWING,SWIRL,WIDE
vanesLeftRightStringControl of left/right vanes (if applicable)AUTO,1-9,SWING,SWIRL,WIDE
targetTemperatureNumber:TemperatureThe currently set target temperature (if applicable)range between 18°C and 30°C
ambientTemperatureNumber:Temperature(Readonly) The ambient air temperature (if applicable)
outdoorTemperatureNumber:Temperature(Readonly) The outdoor air temperature (if applicable)
errorStatusSwitch(Readonly) The error status of the deviceOn/Off (intesisHome)
errorStatusString(Readonly) The error status of the deviceOK,ERR (intesisBox)
errorCodeString(Readonly) The error code if an error encounterednot documented
wifiSignalNumber(Readonly) WiFi signal strength4=excellent, 3=very good, 2=good, 1=acceptable, 0=low

Note that individual A/C units may not support all channels, or all possible values for those channels.

The binding will add all supported channels and possible values on first Thing initialization and list them as Thing properties. If new channels or values might be supported after firmware upgrades, deleting the Thing and re-adding is necessary. For example, not all A/C units have controllable vanes or fan speed may be limited to 1-4, instead of all of 1-9. The target temperature is also limited to a device specific range. For target temperature, sending an invalid value will cause it to choose the minimum/maximum allowable value as appropriate. The device will also round it to whatever step size it supports. For all other channels, invalid values are ignored. IntesisBox firmware 1.3.3 reports temperatures by full degrees only (e.g. 23.0) even if a half degree (e.g. 23.5) was set.

Full Example ​

The binding can be fully setup from the UI but if you decide to use files here is a full example:

Things ​

dsl
Thing intesis:intesisHome:acOffice "AC Unit Adapter" @ "AC" [ipAddress="192.168.1.100", password="xxxxx"]
Thing intesis:intesisBox:acOffice  "AC Unit Adapter" @ "AC" [ipAddress="192.168.1.100", port=3310]

Items ​

dsl
Switch              ac               "Power"                                        { channel="intesis:intesisHome:acOffice:power" }
String              acMode           "Mode"                                         { channel="intesis:intesisHome:acOffice:mode" }
String              acFanSpeed       "Fan Speed"             <fan>                  { channel="intesis:intesisHome:acOffice:fanSpeed" }
String              acVanesUpDown    "Vanes Up/Ddown Position"                      { channel="intesis:intesisHome:acOffice:vanesUpDown" }
String              acVanesLeftRight "Vanes Left/Right Position"                    { channel="intesis:intesisHome:acOffice:vanesLeftRight" }
Number:Temperature  acSetPoint       "Target Temperature"    <heating>              { channel="intesis:intesisHome:acOffice:targetTemperature" }
Number:Temperature  acAmbientTemp    "Ambient Temperature"   <temperature>          { channel="intesis:intesisHome:acOffice:ambientTemperature" }
Number:Temperature  acOutdoorTemp    "Outdoor Temperature"   <temperature>          { channel="intesis:intesisHome:acOffice:outdoorTemperature" }
String              acErrorStatus    "Errorstatus"                                  { channel="intesis:intesisBox:acOffice:errorStatus" }
String              acErrorCode      "Errorcode"                                    { channel="intesis:intesisBox:acOffice:errorCode" }
String              acWifiSignal     "Wifi Signal Quality"   <qualityofservice>     { channel="intesis:intesisBox:acOffice:wifiSignal" }

Sitemap ​

dsl
sitemap intesishome label="My AC control" {

    Frame label="Climate" {
          Switch item=ac
          Switch item=acMode           icon="heating"          mappings=[AUTO="Auto", HEAT="Heat", DRY="Dry", FAN="Fan", COOL="Cool"]
          Switch item=acFanSpeed       icon="qualityofservice" mappings=[AUTO="Auto", 1="Low", 2="Med", 3="MedHigh", 4="High"]
          Switch item=acVanesUpDown    icon="movecontrol"      mappings=[AUTO="Stop", 1="1", 2="2", 3="3", 4="4", 5="5", SWING="Swing"]
          Switch item=acVanesLeftRight icon="movecontrol"      mappings=[AUTO="Stop", 1="1", 2="2", 3="3", 4="4", 5="5", SWING="Swing"]
          Setpoint item=acSetPoint     icon="temperature"      minValue=16 maxValue=28 step=1
          Text item=acAmbientTemp      icon="temperature"
          Text item=acOutdoorTemp      icon="temperature"
          Text item=acErrorStatus
          Text item=acErrorCode
          Text item=acWifiSignal       icon="qualityofservice"

    }
}