Skip to content

Bosch Indego Binding ​

This is the Binding for Bosch Indego Connect lawn mowers. Thank´s to zazaz-de who found out how the API works. His Java Library made this Binding possible.

Discovery ​

When the bridge is authorized, the binding can automatically discover Indego mowers connected to the SingleKey ID account.

Thing Configuration ​

account Bridge Configuration ​

There are no parameters for the bridge. However, the bridge is used for managing the SingleKey ID digital identity.

Authorization ​

To authorize, please follow these steps:

  • In your browser, go to the Bosch Indego login page.
  • Select "Bosch ID", enter your e-mail address and password and click "Log-in".
  • In your browser, open Developer Tools.
  • With developer tools showing on the right, go to Bosch Indego login page again.
  • "Please wait..." should now be displayed.
  • Find the authresp and copy the code: com.bosch.indegoconnect://login/?code=<copy this>
  • Use the openHAB console to authorize with this code: openhab:boschindego authorize <bridgeId> <paste code>

indego Thing Configuration ​

ParameterDescriptionDefaultRequired
serialNumberThe serial number of the connected Indego moweryes
refreshThe number of seconds between refreshing device state when idle180no
stateActiveRefreshThe number of seconds between refreshing device state when active30no
cuttingTimeRefreshThe number of minutes between refreshing last/next cutting time60no

Channels ​

ChannelItem TypeDescriptionWriteable
stateNumberYou can send commands to this channel to control the mower and read the simplified state from it (1=mow, 2=return to dock, 3=pause)Yes
errorcodeNumberError code of the mower (0=no error)
statecodeNumberDetailed state of the mower
textualstateStringState as a text.
readyNumberShows if the mower is ready to mow (1=ready, 0=not ready)
mowedDimmerCut grass in percent
lastCuttingDateTimeLast cutting time
nextCuttingDateTimeNext scheduled cutting time
batteryVoltageNumber:ElectricPotentialBattery voltage reported by the device1,2
batteryLevelNumberBattery level as a percentage (0-100%)1
lowBatterySwitchLow battery warning with possible values on (low battery) and off (battery ok)1
batteryTemperatureNumber:TemperatureBattery temperature reported by the device1
gardenSizeNumber:AreaGarden size mapped by the device
gardenMapImageGarden map created by the device3

1) This will be updated every six hours when the device is idle. It will wake up the device, which can include turning on its display. When the device is active or charging, this will be updated every two minutes.

2) Currently for some models the channel batteryVoltage is populated with the same value as batteryLevel. For these models batteryLevel should be used instead of batteryVoltage.

3) This will be updated as often as specified by the stateActiveRefresh thing parameter.

State Codes ​

CodeDescription
0Reading status
257Charging
258Docked
259Docked - Software update
260Docked
261Docked
262Docked - Loading map
263Docked - Saving map
266Leaving dock
513Mowing
514Relocalising
515Loading map
516Learning lawn
517Paused
518Border cut
519Idle in lawn
523SpotMow
524Mowing randomly
768Returning to dock
769Returning to dock
770Returning to dock
771Returning to dock - Battery low
772Returning to dock - Calendar timeslot ended
773Returning to dock - Battery temp range
774Returning to dock
775Returning to dock - Lawn complete
776Returning to dock - Relocalising
1025Diagnostic mode
1026End of life
1281Software update
1537Energy save mode
64513Docked

Full Example ​

indego.things File ​

dsl
Bridge boschindego:account:singlekey {
    Things:
        Thing indego lawnmower [serialNumber="1234567890", refresh=120]
}

indego.items File ​

dsl
Number                   Indego_State              { channel="boschindego:indego:singlekey:lawnmower:state" }
Number                   Indego_ErrorCode          { channel="boschindego:indego:singlekey:lawnmower:errorcode" }
Number                   Indego_StateCode          { channel="boschindego:indego:singlekey:lawnmower:statecode" }
String                   Indego_TextualState       { channel="boschindego:indego:singlekey:lawnmower:textualstate" }
Number                   Indego_Ready              { channel="boschindego:indego:singlekey:lawnmower:ready" }
Dimmer                   Indego_Mowed              { channel="boschindego:indego:singlekey:lawnmower:mowed" }
DateTime                 Indego_LastCutting        { channel="boschindego:indego:singlekey:lawnmower:lastCutting" }
DateTime                 Indego_NextCutting        { channel="boschindego:indego:singlekey:lawnmower:nextCutting" }
Number:ElectricPotential Indego_BatteryVoltage     { channel="boschindego:indego:singlekey:lawnmower:batteryVoltage" }
Number                   Indego_BatteryLevel       { channel="boschindego:indego:singlekey:lawnmower:batteryLevel" }
Switch                   Indego_LowBattery         { channel="boschindego:indego:singlekey:lawnmower:lowBattery" }
Number:Temperature       Indego_BatteryTemperature { channel="boschindego:indego:singlekey:lawnmower:batteryTemperature" }
Number:Area              Indego_GardenSize         { channel="boschindego:indego:singlekey:lawnmower:gardenSize" }
Image                    Indego_GardenMap          { channel="boschindego:indego:singlekey:lawnmower:gardenMap" }

indego.sitemap File ​

dsl
Switch item=Indego_State mappings=[1="Mow", 2="Return",3="Pause"]